Renovation of Gutter / Downtake & Roof Sheet Work

Name of Description Qty. Unit Rate (INR) Total (INR)

Supplying of structural steel confirming to IS:

Payment will be made based on theoretical

consumption of materials worked cut from

construction drawings or measured as actuals if

1 drawings are not available on weight basis by multing 2.50 MT.

length / size of the section with standard unit weight

as per IS. (Rolling margins and wastage will not be

paid separately and quoted rates deemed to be

included the same.) as instructed by EIC.

L/C for straightening, cutting, cleaning, fabricating,

erecting placing in position and connecting M.S. Strl.

Work fabricated from rolled steel section, plates,

angles, channels, rounds, flats, RHS etc. in roof

trusses, column, beams, gentry girders, bracings,

catwalk for false ceiling platforms, pipe trestles,

stairs, monorails, cleats, protection angles, brackets,

hangers, purlins, tie runners, sag rod with threading,

triangular frames for louvers, cable trays, rain water

& other utilities pipe supports, ladders with or

2 without cage, canopy, etc. including transport, 2.50 MT.

loading and unloading as end when required, cutting

wastage, welding with welding rods ( shop & site)

bolting, wherever necessary including cleaning and

two coats of epoxy primer and two coats of epoxy

paint of Aisan or Berger make etc. complete. (Rate to

include cost of bolts, nuts, washers, rolling margins,

wastage etc. For payment, weight shall be worked

out by multplying length / size of the section as per

drawing with standard unit weight as per IS) as

instructed by EIC.

Supply & Installation of Precoated GALVALUME sheet

of TCT 0.5 mm thick for Roofing and Cladding work of

approved manufacturer complete in all respects with

self drilling & tapping screws of "Buildex" or "Hilti" or

"Corroshield" make, EPDM washers etc. including

cutting to proper size, mitering, laps, necessary

3 scaffolding etc. Finish on the weather face of wall and 250.00 SMT.

roof panels, and related components shall be

Minimum 150 gms/sqm Aluminum / Zinc alloy

coating mass – total of both sides (55% Aluminum +

43.5% Zinc + 1.5% Silicon- Coating class AZ150 or

equivalent), Pre-treatment Chromate coating on

either sides, Primer Coating (Epoxy) On Top Side 5 to

PIND-2526-02353 - PRICE BID

7 Microns, SMP or PVDF material of 20-25 microns on

Top side and Back Coat – Epoxy based 5 to 7 Microns.

(Measurement shall be paid on Plan Area Only, No

overlap shall be paid separately) Approved makes:

Tata Bluescope, Jindal, Union, Dongbu.

Do as item above but Supply & Installation of

Accessaries of average width up to 1 Mt. Like.. Ridge

/ Gutter / Barge board / Flashing / Curves etc. as per

directed by EIC.

Making of Vata, by cutting Groove in wall & finished

5 with Cement mortar (1:4) with necessary finished at 50.00 RMT.

all heights etc. complete as per directed by EIC.

Supplying & Fixing 14 SWG GI Gutter of trapezoidal

shape as per the existing design at required level with

necessary overlap & welding including all tools and

6 tackels complete. All welded joints needs to be 135.00 RMT.

finished with 3mm FRP lining( Both side 300 mm in

width) (As per standard Manufacturer Process) As

directed by EIC.

Providing & Fixing 14 SWG G.I. Spout of Dia 125 mm

in Gutter etc. complete as instructed by EIC.

Providing & fixing PVC pipe of 6 kg / sq cm pressure

and 160 mm Dia of Supreme or Finolex make for rain

8 water downtake pipe including all accessories and 180.00 RMT.

fixing materials, tools, tackles & labors etc. complete

as directed by EIC.

Removing of Existing M.S. Gutter and staging at

designated location for Buyback as per directed by

EIC. The contractor is responsible for the complete

dismantling and removal of existing MS gutters and

supporting structures if required (staging) by Utilize

gas cutters or specialized cutting tools to dismantle

the MS guttering and also Ensure no damage occurs

to adjacent roof sheets or nearby structural members

during the removal process also takecare of

Adjoining areas, including lab floors, must be kept

clear of debris and cleaned daily to maintain safe

working conditions.

Removing of Existing M.S. Pipe of Dia 160 mm and

staging at designated location for Buyback as per

directed by EIC. The contractor is responsible for the

10 complete dismantling and removal of existing MS 150.00 RMT.

Pipe and supporting structures if required (staging)

by Utilize gas cutters or specialized cutting tools to

dismantle the Pipe and also Ensure no damage occurs

PIND-2526-02353 - PRICE BID

to adjacent roof sheets or nearby structural members

during the removal process also takecare of

Adjoining areas, including lab floors must be kept

clear of debris and cleaned daily to maintain safe

working conditions.

Removing of Existing Pre-Coated Roof & cladding

Sheet and staging at designated location for Buyback

as per directed by EIC. The contractor is responsible

for the complete dismantling and removal of existing

sheeting material if required (staging) by Utilize gas

cutters or specialized cutting or removal tools to

dismantle the sheet and also Ensure no damage

occurs to adjacent roof sheets or nearby structural

members during the removal process also takecare

of Adjoining areas, including lab floors must be kept

clear of debris and cleaned daily to maintain safe

working conditions.

A buyback of removed structure material like MS

Gutter, MS pipe, support structure and PPGI, GI

Roofing and cladding sheet , Buyback Quantities will

be finalized based on actual tonnages with necessary

proff and joint witness from the both parties. Scope

includes loading, unloading and transportation and

weigment of structure material all complete as

instructed by EIC

Terms & Conditions :

1 GST Extra As applicable on item rate contract.

2 Strict implementation of standard safety procedures & PPEs for safe environment at work place.

As the work is going to be carried out in running plant, adherence of Work permit system is highly required

3 as per ERDA terms.

4 Vendor to follow the government rules and regulations as a part of contractual compliance.

5 Total work period is 30 days from the date of LOI / FOA / PO.

6 Vendor to provide MTC and TPI reports as supporting document.

7 DLP Period 2 years frm the date of commissioning.

8 Retention amount -10% work done price hold till DLP and may release against submission of PBG.

9 All necessary scaffolding will be in scope of vendor.