GE/863/EWS-T-68 OF 2021-22

Amount

WOODEN CABINET 0.75 x 0.40 x 0.80 MTRS DOUBLE STOREY ( Drg No. FD-TP)

Removing old unserviceable lock from Wooden Cabinet 0.75x 0.40 x 0.80 m double storey and S&F new lock CP Brass to wooden cabinet double store as shown on drawing complete all as specified and directed.

Removing old unserviceable handles from Wooden Cabinet 0.75 x 0.40 x 0.80 m double storey and S&F new CP steel handle to wooden cabinet double storey as shown on drawing complete all as specified and directed.

Removing old unserviceable front door from wooden cabinet and S&F new front door made out of 18/19mm thick exterior grade pre-laminated particle board as shown on drawing complete all as specified and directed.

CHAIR SCHOOL WITH HAND BOARD ( Drg No. FD/E6/MAP/05 )

Removing old unserviceable one piece PVC seat and back from chair school with hand board and S & F new one piece PVC seat and back of best quality as per shape and size as shown on drawing complete all as specified and directed.

Removing old unserviceable hand board top and S & F new hand board top of 18mm thick prelaminated particle board teak faced with PVC edging and screw to 25 mm hollow steel pipe inserted in 20 mm as per shape and size as shown on drawing complete all as specified and directed.

M&L for Welding to broken joints of Chair school with hand board as shown on drawing complete all as specified and directed.

S&F in replacement PVC shoes to Chair school with hand board as shown on drawing complete all as specified and directed.

FIBRE TABLE OF SIZE 6' X 2.5' WITH FOLDING TYPE TUBLAR STEEL FRAME LEGS ( Drg No. FD-TP )

Removing of old unserviceable top from FIBRE TABLE OF SIZE 6' X 2.5' and S&F new top made out of 18/19mm thick exterior grade pre-laminated particle board, teak faced, ISI marked with 04mm thick teak wood beading all-around the top of table as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Removing of old unserviceable front and rear legs from existing Fibre table and S&F the same size new front and rear legs made of MS tubular 25 mm dia fitted to Fiber table along with duly one coat of synthetic enamel black paint as shown on drawing complete all as specified and directed.

S&F in replacement PVC shoes to Fiber table as shown on drawing complete all as specified and directed.

M&L for Welding to broken joints of Fiber table as shown on drawing complete all as specified and directed.

CHAIR WRITING STEEL ('S'- TYPE) ( Drg No. FD-TP )

Removing of old unserviceable seat of chair writing steel ('S' Type) and S&F new seat of 12mm thick plywood commercial quality (ISI marked) covered with 50mm thick foam and best quality of Leatherette as shown on drawing complete all as specified and directed. Fixing shall be including all minor repairs and welding etc. (Note:- The Leatherette of rate ranging between Rs. 150/- to Rs. 200/- per meter as per sample approved by GE).

All as per Sr item No.4.01 here -in-before but back of Chair writing.

Replacement of old unserviceable / broken arm rest with new arm rest of of same quality and shape as shown on drawing complete all as specified and directed.

CHAIR 'S' TYPE WITH ARMS AND CUSHION ( Drg No. FD-TP )

Replacement of old unserviceable seat of chair writing with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth as shown on drawing complete all as specified and directed. Fixing shall be including all minor repairs and welding etc. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 200/- per meter as per sample approved by GE). (Make : Duro- Model- Duromac, Archidply-Model-Gold, Centurey-Model- Maxima, Greenply-Model-Geen)

All as per Sr item No.5.01 here -in-before but back of Chair writing.

Removing of old/unserviceable tapestry cloth from seat and back of existing Chair writing and S&F new tapestry cloth to seat and back of Chair writing as shown on drawing complete all as specified and directed. Fixing shall be including all minor repairs and welding etc. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 200/- per meter as per sample approved by GE).

M&L Welding to broken joints of Chair writing complete all as specified and directed.

Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base as shown on drawing complete all as specified and directed.

CHAIR COMPUTER ( Drg No. FD/E6/MAP/01, TP)

Replacement of old unserviceable seat of Chair Computer with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth as shown on drawing complete all as specified and directed. Fixing shall be including all minor repairs and welding etc. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 200/- per meter as per sample approved by GE). (Make : Duro- Model- Duromac, Archidply-Model-Gold, Centurey-Model- Maxima, Greenply-Model-Geen)

All as per Sr item No. 6.01 here -in-before but back of Chair Computer.

Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Computer and S&F new tapestry cloth to seat and back of Chair Computer as shown on drawing complete all as specified and directed. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 200/- per meter as per sample approved by GE).

Replacement of unserviceable hydraulic system of Chair Computer for the adjustment of height as shown on drawing complete all as specified and directed.

Replacement of old ,unserviceable/broken wheel base with wheels of Chair computer as shown on drawing complete all as specified and directed.

Removing old/unserviceable twin castor wheel from chair and S & F new twin wheel castors as per shape and size as shown on drawing complete all as specified and directed.

Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base as shown on drawing complete all as specified and directed.

FIBER TABLE OF SIZE 1830 x 750 x 900 MM WITH DETACHABLE HOLDING TUBLER TRAME LEGS ( Drg No. FD-TP)

Removing of old unserviceable top from FIBER TABLE OF SIZE 1830 x 750 x 900 MM and S&F new top made out of 18/19mm thick exterior grade pre-laminated particle board, teak faced, ISI marked with 04mm thick teak wood beading all-around the top of table as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Removing of old unserviceable front and rear legs from existing Fiber table and S&F the same size new front and rear legs made of MS tubular 25 mm dia should be fitted to Fiber table and duly one coat of synthetic enamel black paint as shown on drawing complete all as specified and directed.

S&F in replacement PVC shoes to Fiber table complete as shown on drawing complete all as specified and directed.

M&L Welding to broken joints of Fiber table complete all as specified and directed.

TABLE OF SIZE 1220 X 760 X 760 MM AND DRAWER INCLUDING LOCKING ARRANGEMENT ARE PROVIDED ( Drg No. FD-TP)

Removing of old unserviceable steel telescopic channel of drawer and S&F new stainless steel telescopic channel to Table as shown on drawing complete all as specified and directed.

Removing of old unserviceable drawer handle S&F new CP steel handle in replacement to Table as shown on drawing complete all as specified and directed.

Removing of old unserviceable drawer lock and S&F new brass drawer lock as shown on drawing complete all as specified and directed.

CHAIR EASY ( Drg No. FD-229)

Replacement of old unserviceable front leg from existing Chair Easy and S&F the same size new front leg made of Ist class hard wood teak to Chair Easy duly french polished as shown on drawing complete all as specified and directed.

All as per srl item No. 9.01 here- in- before but rear leg of Chair Easy.

All as per srl item No. 9.01 here-in-before but arm of Chair Easy.

Removing of old unserviceable/broken canning bits from Chair Easy and S&F new canning bits of Ist class hard wood teak all as per shape and size as shown on drawing complete all as specified and directed.

Removing of old/unserviceable plastic cane from Chair Easy and recanning the same in Godrej pattern with new plastic cane 02mm wide pure white half round gola type having thickness 0.4mm and border with 03mm wide plastic cane as shown on drawing complete all as specified and directed.

CHAIR DINING ( Drg No. FD- 228, 279 )

Removing of old unserviceable front leg from existing Chair dining and S&F the same size new front leg made out of Ist class hard wood teak to chair dining duly french polished as shown on drawing complete all as specified and directed.

All as per srl item No. 10.01 here-in-before but rear leg of Chair dining.

All as per srl item No. 10.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 35mm ) of Chair dining.

All as per srl item No. 10.01 here-in-before but stiffener between front leg to rear leg of Chair dining.

All as per srl item No. 10.01 here-in-before but stiffener for jointing to side stiffeners of Chair dining.

Removing of old unserviceable/broken canning bits from Chair dining and S&F new canning bits of Ist class hard wood teak all as per shape and size as shown on drawing complete all as specified and directed.

Removing of old/unserviceable plastic cane from Chair dining and recanning the same in Godrej pattern with new plastic cane 02mm wide pure white half round gola type having thickness 0.4mm and border with 03mm wide plastic cane as shown on drawing complete all as specified and directed.

S&F wooden corners made of Ist class hard wood teak to legs of Chair dining joining top rails each with steel screws as shown on drawing complete all as specified and directed.

CHAIR WRITING ( Drg No. FD-250, 280)

Replacement of old unserviceable front leg from existing Chair writing and supply and fixing the same size new front leg made out of Ist class hard wood teak to Chair writing duly french polished as shown on drawing complete all as specified and directed.

All as per srl item No. 11.01 here-in-before but rear leg of chair writing.

All as per srl item No. 11.01 here-in-before but back rest (i.e. horizontal wooden members for back rest size as per drawing) chair writing.

All as per srl item No. 11.01 here-in-before but stiffener between front leg and rear leg chair writing.

All as per srl item No. 11.01 here-in-before but stiffener for jointing to side stiffeners of chair writing

All as per srl item No. 11.01 here-in-before but arm of chair writing.

Removing of old unserviceable/broken canning bits from chair writing and S&F new canning bits of Ist class hard wood teak all as per shape and size as shown on drawing complete all as specified and directed.

S&F wooden corners made of Ist class hard wood teak to legs of Chair writing joining top rails each with steel screws as shown on drawing complete all as specified and directed.

Removing of old/unserviceable plastic cane from Chair writing and recanning the same in Godrej pattern with new plastic cane 02mm wide pure white half round gola type having thickness 0.4mm and border with 03mm wide plastic cane as shown on drawing complete all as specified and directed.

BED PLY TOP ( Drg No. FD-246 & 247)

Removal of old unserviceable long rail from bed and S&F new long rail with rounded edges of size 1980 mm x 90mm x 35 mm of hard wood teak as shown on drawing, including one coat of french polish after preparing the surface by sand paper complete all as specified and directed.

All as per srl item No.12.01 here-in-before but short rail of size 60mm x 60mm of suitable length.

All as per srl item No. 12.01 here-in-before but stiffener of size 60mm x 60mm of suitable length.

S&F flat iron corners at four corners of Bed plytop made of 35x5mm flat iron of mild steel bent to rt. angle each with steel screws as shown on drawing complete all as specified and directed.

Removing of old unserviceable ply wood from the existing head rest of Bed ply top and S & F new OSTF commercial plywood 04mm thick ISI marked, BWR grade to both sides of head rest including 12mm thick half round teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading as shown on drawing complete all as specified and directed.

All as per srl item No. 12.05 here-in-before but foot rest.

Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of Ist class hard wood shisham including provision of 04 mm thick one side teak faced commercial plywood including teak wood beading 04 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed. with both side MNF arrangement and fixing the same all as shown on drawing including one coat of french polish. (Make : Duro- Model- Duromac, Make: Archidply-Model-Gold, Make: Centurey-Model- Maxima, Make: Greenply-Model-Geen)

All as per srl item No. 12.07 here-in-before but foot rest.

PEG TABLE ( Drg No. FD– 277, 384)

Removing of old unserviceable top from Peg table and S&F new top made out of 18/19mm thick exterior grade pre-laminated particle board, teak faced,ISI marked with 04mm thick teak wood beading all-around the top of Peg table as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Replacement of old unserviceable leg from existing Peg table and S&F the same size new leg made out of Ist class hard wood teak to Peg table duly french polished as shown on drawing complete all as specified and directed.

All as per srl item No. 13.02 here-in-before but long / short top rail.

All as per srl item No. 13.02 here-in-before but stiffener of Peg table.

S&F wooden corners made of Ist class hard wood teak to legs of Peg table joining top rails each with steel screws as shown on drawing complete all as specified and directed.

TABLE CENTRE ( Drg No. FD– 274, 235)

Removing of old unserviceable top from table centre and S&F new top made out of 18/19mm thick exterior grade pre-laminated particle board, teak faced, ISI marked with 04mm thick teak wood beading all-around the top of table centre as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Replacement of old unserviceable leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak to table centre duly french polished as shown on drawing complete all as specified and directed.

All as per srl item No. 14.02 here-in-before but long rail.

All as per srl item No. 14.02 here-in-before but short rail.

All as per srl item No. 14.02 here-in-before but stiffener between the legs of table centre.

S&F wooden corners made of Ist class hard wood teak to legs of Table centre joining top rails each with steel screws as shown on drawing complete all as specified and directed.

TEAPOY WOODEN ( Drg No. FD-278, 382)

Removing of old unserviceable top from Teapoy and S&F new top made out of 18/19mm thick exterior grade pre-laminated particle board teak faced with 4mm thick teak wood beading all-around the top of teapoy wooden as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Replacement of old unserviceable leg from existing Teapoy wooden and supply and fixing the same size new leg made out of Ist class hard wood teak to teapoy wooden duly french polished as shown on drawing complete all as specified and directed.

All as per srl item No. 15.02 here-in-before but long rail.

All as per srl item No. 15.02 here-in-before but short rail.

All as per srl item No. 15.02 here-in-before but stiffener of teapoy wooden.

S&F wooden corners made of Ist class hard wood teak to legs of Teapoy wooden joining top rails each with steel screws as shown on drawing complete all as specified and directed.

TABLE WRITING ( Drg No. FD-249, 275)

Removing of old unserviceable top from Table writing and S&F new top made out of 18/19mm thick exterior grade pre-laminated particle board, teak faced with 04mm thick teak wood beading all-around the top of table writing as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Removing of old unserviceable side of the box which house the drawer from Table writing and S&F new side made out of 18/19mm thick exterior grade pre-laminated particle board, teak faced to table writing as shown on drawing as shown on drawing complete all as specified and directed.

Removal of old unserviceable back ply of table writing and S&F the new back ply of same size of 12mm thick OSTFcommercial plywood, ISI marked (Irrespective of all as shown on drawing) including one coat of french polish as shown on drawing complete all as specified and directed.

Replacement of unserviceable drawer with new drawer of same size and shape to table writing. Front of the drawer shall be made out of 18mm thick. exterior grade pre-laminated particle board teak faced and including aluminium anodized knob.Sides,base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drawing including one coat of french polish complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Removal of old damaged door complete from table writing and S&F the new door of same size with piano type hinges made out of 18/19mm thick exterior grade pre-laminated particle board top of teak shade all as shown in drawing including aluminium anodized Knob as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Replacement of unserviceable leg of table writing with new leg made out of Ist class hard wood teak all as shown on drawing including one coat of french polish complete all as specified and directed.

All as per Sr. Item No. 16.06 but top long rail under the top of table writing.

All as per Sr. Item No. 16.06 but top short rail under the top of table writing.

All as per Sr. Item No. 16.06 but short stiffener of table writing.

All as per Sr. Item No.16.06 but long stiffener of table writing.

Removing of old/unserviceable knob from the Table writing and S&F new CP brass knob as per sample ,shape and size as shown on drawing complete all as specified and directed.

S&F wooden corners made of Ist class hard wood teak to legs of Teapoy wooden joining top rails each with steel screws as shown on drawing complete all as specified and directed.

TABLE DINING 06 PERSONS ( Drg No. FD- 239,273)

Removing of old unserviceable top from Table dining 06 persons and S&F new top made out of 18/19mm thick pre-laminated particle board, teak faced with 4mm thick teak wood beading all-around the top of table dining 06 persons as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Replacement of old unserviceable leg from existing Table dining 06 persons and S&F the same size new leg made out of Ist class hard wood teak to table dining 06 persons duly french polished as shown on drawing complete all as specified and directed.

All as per srl item No. 17.02 here-in-before but long rail.

All as per srl item No. 17.02 here-in-before but short rail.

All as per srl item No. 17.02 here-in-before but stiffener under the top of table dining 08 persons.

S & F wooden corners made of first class hard wood teak to table dining 06 persons with steel screws as shown on drawing complete all as specified and directed.

SOFA SET SINGLE SEATER WITH CUSHION ( Drg No. FD-281)

Removing of old unserviceable arm rest from exiting sofa chair and S&F new 1st class hard wood teak arm rest to sofa set single seat as shown on drawing complete all as specified and directed.

All as per item No 10 (i) here-in-before but front rail of sofa set single seater.

All as per item No. 10(i) here-in-before but side rail of sofa set single seater.

All as per item No. 10(i) here-in-before but legs of sofa set single seater.

All as per item No. 10 (i) here-in-before but wooden battens of sofa set single seater.

S &F foam cushion of size 22" x 21",100 mm thick 32 density duly covered with best tapestry cloth of approved quality and colour as shown on drawing complete all as specified and directed. ( Sample of tapestry cloth shall be approved by the GE). Make of Cushion :- Sleepwell / Feather-foam / Kurl-on Goldline.

Removal of tapestry cloth from existing seat/back of Sofa set single seater and providing new tapestry cloth from existing seat/back of sofa set single seater and providing new tapestry cloth DCM/Handloom long cloth of approved shade of Indian make of rate ranging between Rs. 200/- to Rs. 250/- per meter and fixing as shown on drawing complete all as specified and directed. ( Sample of tapestry cloth shall be approved by the GE)

SOFA SET 05 SEATER WITH CUSHION ( Drg No. FD-281)

Removing of old unserviceable arm rest from existing sofa set 05 seater and S&F new 1st class hard wood teak arm rest to sofa set 05 seater as shown on drawing complete all as specified and directed.

All as per item No. 11 (i) here-in-before but front rail of sofa set single piece of 03 seat.

All as per item No. 11(i) here-in-before but front rail of sofa set single piece of 01 seat.

All as per item No 11(i) here-in-before but side rail of sofa set 05 seater.

All as per item No 11 (i) here-in-before but legs of sofa set 05 seater.

All as per item No 11 (i) here-in-before but wooden battens of sofa set 05 seater.

SOFA SET 05 SEATER ( Drg No. FD-234, 18(M) )

M & L for dismantling of old unserviceable upholstered portion of sofa set five seater ( five pieces, i.e, two with arms and three without arms) by removing old torn out tapestry cloth, marking, hessain cloth, coir fiber, cotton layer and cane stick and repairing and tightening of frame work changing springs wherever required and renovate the sofa set with new cotton teasted, 12mm thick cotton layer, 50mm thick coir layer, hessain cloth, marking cloth , all outer portion of sofa set shall be covered with 1" cushion 32 density of "Sleep well" with proper leveling and tapestry cloth (Cost of the tapestry cloth shall be less than RS. 300/- per meter) as shown on drawing complete all as specified and directed. Note :- Spring shall be measured and paid separately under relevant items of sch 'A'.

S &F in replacement copper plated steel spring of size 100mm dia and 150mm height of approved quality as shown on drawing complete all as specified and directed.

TABLE BED SIDE (MAP) ( Drg No. FD/E6/MAP/15(R))

Replacement of Upper drawer made of 18 mm thick teak faced pre-laminated particle board, exterior grade and provided with 06mm thick bottom of ISI marked commercial plywood of BWR grade as shown on drawing complete all as specified and directed.

All as per srl item No. 21.01 here-in-before but lower drawer of table bed side.

Removing of old unserviceable top from table bed side and supply and fixing the new top of same size made out of 18/19 mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

All as per srl item No. 21.03 here-in-before but side of table bed side.

Removing of old unserviceable back ply of table bed side and S&F the newback ply of same size made out of 12mm thick OSTF commercial plywood as shown on drawing complete all as specified and directed.

Removing of old/unserviceable handle from the table bed side and supply and fixing new CP steel handle 75mm long as per sample ,shape and size as shown on drawing complete all as specified and directed.

Removing of old unserviceable steel telescopic channel of drawers and S&F new stainless steel telescopic channel to Table bed side (Map) as shown on drawing complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR ( Drg No. FD-230)

Removing of old unserviceable looking mirror from table dressing gents with mirror and S&F new looking mirror of size 750 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and hanging clips duly polished as shown on drawing complete all as specified and directed. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable box of table dressing gents and S&F new box made of 18mm thick teak faced, exterior grade, pre-laminated particle board and 12mm thick commercial plywood back including drawers, hanging clips and duly polished as per shape and size as shown on drawing complete all as specified and directed.

TABLE DRESSING LADIES WITH MIRROR ( Drg No. FD-251,TP, FD-MAP-II/07)

Removing of old unserviceable looking mirror from table dressing ladies and S&F new looking mirror of size 1200 x 450 x 05mm thick and including frame of teak wood and polishing complete in all respect to fix at the back of its box as shown on drawing complete all as specified and directed. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable box of table dressing ladies and S&F new box made of 18mm thick teak faced, exterior grade, pre-laminated particle board and 12mm thick commercial plywood back including drawers, legs and with necessary arrangements to fix the mirror at the back and duly polished as per shape and size as shown on drawing complete all as specified and directed.

TABLE COMPUTER ( Drg No. FD/E6/MAP/03,TP)

Removing of old unserviceable top from Table computer and S&F the new top of same size made out of 18/19mm thick exterior grade pre-laminated particle board teak faced with 4mm thick teak wood beading all-around the table top as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

All as per srl item No. 24.01 here-in-before but bottom shelf of Table computer.

All as per srl item No.24.01 here-in-before but vertical board on side of Table computer.

All as per srl item No. 24.01 here-in-before but keyboard tray of Table computer.

All as per srl item No. 24.01 here-in-before but drawer of Table computer.

All as per srl item No. 24.01 here-in-before but pull out mouse tray of Table computer.

Removing of old unserviceable steel telescopic channel of key board and S&F new stainless steel telescopic channel to Table computer as shown on drawing complete all as specified and directed.

S&F new CP brass knob/75mm long CP steel handle in replacement to Table computer as shown on drawing complete all as specified and directed.

TABLE 3'X 2' WITH DRAWER WOODEN ( Drg No. FD- 283)

Removing of old unserviceable top from Table 3' x 2' with drawer and supply and fixing new top made out of 18/19mm thick exterior grade pre-laminated particle board, teak faced with 4mm thick teak wood beading all-around the top of Table 3' x 2' with drawer as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Replacement of old unserviceable leg from existing Table 3' X 2' with drawer wooden and supply and fixing the same size new leg made out of Ist class hard wood teak to Table 3' X 2' with drawer wooden duly french polished as shown on drawing complete all as specified and directed.

All as per srl item No. 25.02 here-in-before but long rail.

All as per srl item No.25.02 here-in-before but short rail.

All as per srl item No. 25.02 here-in-before but stiffener of Table 3' x 2' with drawer.

Replacement of unserviceable drawer with new drawer of same size and shape to table writing. Front of the drawer shall be made out of 18mm thick. pre-laminated particle board teak faced and including aluminium anodized knob.Sides,base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown on drawing including one coat of french polish complete all as specified and directed.. (Make: Action-tesa, Archidply, Ecoboard).

ALMIRAH LARGE /MEDIUM / SMALLSTEEL AND ALMIRAH LARGE/MEDIUM 1/2H,1/2S STEEL ( Drg No. FD- 1031,1032,114(M),1034, FD/E6/MAP/18)

Removing of old unserviceable handles from Almirah large steel, Almirah large steel1/2H,1/2S , Almirah medium/small steel and S&F new CP steel handle to Almirah steel as shown on drawing complete all as specified and directed.

Removing of old unserviceable lock from Almirah large steel, Almirah large steel1/2H,1/2S , Almirah medium/small steel and S&F new brass lock 75mm long, 06 lever with two keys to Almirah steel as shown on drawing complete all as specified and directed.

Removing of old unserviceable handle & lock assembly from Almirah large steel, Almirah large steel1/2H,1/2S, Almirah medium/small steel and S&F new handle & lock assembly to Almirah steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of primer after preparation of surfaces complete with spray machine as shown on drawing complete all as specified and directed.

Removing of old unserviceable foot rest from Almirah large steel, Almirah large steel1/2H,1/2S, Almirah medium/small steel and S&F new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel paint over a coat of primer after preparation of surfaces with spray machine as shown on drawing complete all as specified and directed.

All as per Sr.item No. 26.04 here-in -before but bottom sheet of Almirah large steel, Almirah large steel1/2H,1/2S, Almirah medium/small steel.

All as per Sr.item No. 26.04 here-in -before but shelf of Almirah large steel, Almirah large steel1/2H,1/2S, Almirah medium/small steel.

Removing of old unserviceable butt hinges of Almirah large steel Almirah large steel1/2H,1/2S , Almirah medium/small steel and S&F new butt hinges 75 mm long and adjusting door by riveting / welding as shown on drawing complete all as specified and directed.

M&L for removing the dented/loose shelf from Almirah large steel Almirah large steel 1/2H,1/2S , Almirah medium/small steel and refixing it with mild steel riveting /spot welding after bringing it to original shape as shown on drawing complete all as specified and directed.

Removing of old unserviceable bush from Almirah large steel Almirah large steel 1/2H,1/2S , Almirah medium/small steel and S&F new best and approved quality brass bush to Almirah steel as shown on drawing complete all as specified and directed.

ALMIRAH LARGE STEEL 1/2 H, 1/2S ( Drg No. FD/E6/MAP/18)

Replacement of unserviceable conduit pipe with new CP steel conduit pipe of suitable size of 20mm dia having wall thickness 1.25mm to Almirah large steel 1/2H,1/2S as shown on drawing complete all as specified and directed.

Replacement of unserviceable socket with new aluminium socket/brackets suitable for MS 20mm dia conduit pipes. to Almirah large steel 1/2H,1/2S as shown on drawing complete all as specified and directed.

ALMIRAH STEEL DOUBLE DECKER ( Drg No. FD-TP)

Replacement of old unserviceable Sliding bolt from Almirah double decker steel with new 100mm long MS chromium plated sliding bolt as shown on drawing complete all as specified and directed.

Replacement of old unserviceable bow handle with new 100mm long CP steel bow handle as shown on drawing complete all as specified and directed.

Replacement of unserviceable conduit pipe with new CP steel conduit pipe of suitable size of 20mm dia having wall thickness 1.25mm to Almirah double decker steel as shown on drawing complete all as specified and directed.

Replacement of unserviceable socket with new aluminium socket/brackets suitable for MS 20mm dia conduit pipes as shown on drawing complete all as specified and directed.

LOCKER BED SIDE STEEL ( Drg No. FD-257, 1029)

Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple as shown on drawing complete all as specified and directed.

Replacement of old unserviceable bow handle with new 100mm long CP steel bow handle as shown on drawing complete all as specified and directed.

Replacement of unserviceable conduit pipe with new CP steel conduit pipe of suitable size of 20mm dia having wall thickness 1.25mm to locker steel as shown on drawing complete all as specified and directed.

Replacement of unserviceable socket with new aluminium socket/brackets suitable for MS 20mm dia conduit pipes as shown on drawing complete all as specified and directed.

CHAIR CBA STEEL WITH ARMS ( Drg No. FD-75(M))

Opening up and removal of old seat, back, shoes and arms of chair CBA steel and preparation of old painted steel surfaces with one coat of synthetic enamel olive green paint and old painted wooden surfaces with one coat of synthetic enamel black paint and refixing new seat/back/arms as shown on drawing complete all as specified and directed. New parts wherever required and ordered shall be paid separately under respective items of schedule 'A' here in after as supply only if ordered to be replaced. The cost of steel bolts 3" long 1/8 " dia with nut & washers etc shall be deemed to be included in the quoted rate of this item.

S&F in replacement new wooden seat of 1st class hard wood teak duly caned in Godrej pattern and painted with two coats of synthetic enamel black paint over a coat of primer to the seat frame of chair CBA steel as shown on drawing complete all as specified and directed.

All as per Sr.item No. 30.03 here-in -before but back of Chair CBA steel.

S&F of new flat iron of size 25mm x 3mm fixed to support seat and back of Chair CBA steel including necessary welding with steel frame etc and applying one coat of synthetic enamel olive green paint over a coat of red oxide primer as shown on drawing complete all as specified and directed.

S&F in replacement new wooden arm of 1st class hard wood teak duly painted with two coats of synthetic enamel black paint over a coat of primer as shown on drawing complete all as specified and directed.

M&L for Welding to broken joints of Chair CBA steel as shown on drawing complete all as specified and directed.

CHAIR CB STEEL WITHOUT ARMS ( Drg No. FD-75(M))

Opening up and removal of old seat, back and shoes from chair CB steel and preparation of old painted steel surfaces with one coat of synthetic enamel olive green paint and old painted wooden surfaces with one coat of synthetic enamel black paint and refixing new seat/back as shown on drawing complete all as specified and directed. New parts wherever required and ordered shall be paid separately under respective items of schedule 'A' here in after as supply only if ordered to be replaced. The cost of steel bolts 3" long 1/8 " dia with nut & washers etc shall be deemed to be included in the quoted rate of this item.

S&F in replacement new wooden seat of 1st class hard wood teak duly caned in Godrej pattern and painted with two coats of synthetic enamel black paint over a coat of primer to the seat frame of chair CB steel as shown on drawing complete all as specified and directed.

All as per Sr.item No. 31.02 here-in -before but back of Chair CB steel.

Supply and fixing of flat iron of size 25mm x 3mm fixed to support seat and back of Chair CB steel including necessary welding with steel frame etc and applying one coat of synthetic enamel olive green paint over a coat of red oxide primer complete all as specified and directed.

M&L for Welding to broken joints of Chair CB steel as shown on drawing complete all as specified and directed.

TABLE OFFICE OFFICER STEEL ( Drg No. FD- 84(M), 1003)

Removing of old unserviceable top from Table office officers steel and S&F the new top of same size made out of 18/19mm thick exterior grade pre-laminated particle board teak faced having 04mm thick teak wood beading all-around the table top as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Removing of old unserviceable lock from Table office officers steel and S&F new brass lock with two keys as shown on drawing complete all as specified and directed.

M&L for removing of old unserviceable drawer from Table office officers steel and refixing the same after repairing the same and making it functional as shown on drawing complete all as specified and directed.

S&F in replacement PVC shoes to Table office officers steel as shown on drawing complete all as specified and directed.

M&L for Welding to broken joints of Table office officer's steel with drawer as shown on drawing complete all as specified and directed.

TABLE OFFICE CLERK STEEL ( Drg No. FD- 84(M), 1004)

Removing of old unserviceable top from Table office clerk steel and S&F the new top of same size made out of 18/19mm thick exterior grade pre-laminated particle board teak faced having 4mm thick teak wood beading all-around the table top as shown on drawing complete all as specified and directed.

Removing of old unserviceable lock from Table office clerk steel and S&F new brass lock with two keys as shown on drawing complete all as specified and directed. (Make : Godrej/Harrison/Plaza).

M&L for removing of old unserviceable drawer from Table office clerk steel and refixing the same after repairing the same and making it functional as shown on drawing complete all as specified and directed.

S&F in replacement PVC shoes to Table office clerk steel as shown on drawing complete all as specified and directed.

M&L for Welding to broken joints of Table office clerk steel with drawer as shown on drawing complete all as specified and directed.

TABLE DINING OR'S STEEL ( Drg No. FD-165(M))

Removing of old unserviceable top from Table dining OR's steel and S&F the new top of same size made out of 18/19mm thick exterior grade pre-laminated particle board teak faced having 4mm thick teak wood beading all-around the table top as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

S&F in replacement PVC shoes to Table dining OR's steel as shown on drawing complete all as specified and directed.

TABLE 3'x 2' WITH DRAWER STEEL ( Drg No. FD-1008)

Removing of old unserviceable top from Table 3'x2' steel and S&F the new top of same size made out of 18/19mm thick exterior grade pre-laminated particle board teak faced having 4mm thick teak wood beading all-around the table top as shown on drawing complete all as specified and directed. (Make: Action-tesa, Archidply, Ecoboard).

Removing of old unserviceable lock from Table 3'x2' steel and S&F new brass lock with two keys as shown on drawing complete all as specified and directed.

M&L for removing of old unserviceable drawer from Table 3'x2' steel and refixing the same after repairing the same and making it functional as shown on drawing complete all as specified and directed.

S&F in replacement PVC shoes to Table 3'x2' steel as shown on drawing complete all as specified and directed.

M&L for Welding to broken joints of Table 3'x2' steel with drawer complete all as specified and directed.

BED PLYTOP, BED HARD(MAP),CHARPOY GI PIPE PLYTOP, CHARPOY IP HARD TOP, DOUBLE BUNK CHARPOY, MS SINGLE SLEEPING BUNK ( Drg No. FD-246&247,220,FD/MAP-II/01, FD/E6/MAP/08(R),TP)

Removing of old unserviceable plywood from following Bed / Charpoy and S&F new plywood made of 12mm thick commercial ply wood (ISI marked) , BWR grade of size 6.5'x3' with nuts and washers as applicable as shown on drawing complete all as specified and directed. (Make : Duro- Model- Duromac, Make: Archidply-Model-Gold, Make: Centurey-Model- Maxima, Make: Greenply-Model-Geen)

BED HARD (MAP) ( Drg No. FD/E6/MAP/15(R))

Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18 mm thick prelaminated particle board both side teak faced having 04 mm thick teak wood beading all around as shown on drawing complete all as specified and directed.

All as per Sr.item No. 37.01 here-in -before but foot board of Bed hard.

CHARPOY GI PIPE PLYTOP ( Drg No. FD-220)

Removing of old unserviceable/broken Elbow and S&F new 03 way GI Elbow 65mm long of 32mm dia ISI marked and fixing in position as shown on drawing complete all as specified and directed.

Removing of old unserviceable/broken check nut and S&F new 06 mm thick ISI marked GI check nut of 32mm dia as shown on drawing complete all as specified and directed.

STORE RACK 3 TIER AND 4 TIER ( Drg No. FD-TP)

Removing of old unserviceable ply wood size 58 inch long and 23.5 inch wide 12mm thickness ISI make archied from store rack 3 tier and S&F the new ply wood as shown on drawing complete all as specified and directed. (Make : Duro- Model- Duromac, Make: Archidply-Model-Gold, Make: Centurey-Model- Maxima, Make: Greenply-Model-Geen)

MATTRESS 19005 x914 x100mm ( Drg No. FD-TP)

S & F in replacement of mattress cover with new cotton cover of size 1905 x 914 x 100mm thick with chain of Indian handloom (as per sample) as shown on drawing complete all as specified and directed.

M&L for complete removing/scrubbing of entire old polished surfaces of the following items with appropriate sand paper / emery paper etc, including preparation of old wooden surfaces by applying seina/burnt seina uniformly for french polish in order to obtain the required glossy finish and applying two coats of french polish to the following wooden furniture items to the entire satisfaction complete all as specified and directed.

Table Dining 06 Person ( Drg No. FD- 239, 273 )

Table peg ( Drg No. FD- 277,384)

Table Centre ( Drg No. FD-235,274)

Table Writing ( Drg No. FD - 275)

Chair Easy ( Drg No. FD - 229)

Chair Dining ( Drg No. FD - 279)

Chair Writing ( Drg No. FD - 280)

Sofa Set 05 seater with cushion ( Drg No. FD-281)

Sofa Set 01seater with cushion ( Drg No. FD-281)

Bed Ply Top ( Drg No. FD-246 & 247)

Teapoy Wooden ( Drg No. FD– 278)

Table dressing gents with mirror ( Drg No. FD-230)

Table dressing ladies with mirror ( Drg No. FD-251)

Table bed side ( Drg No. FD-286)

Table office clerk wooden ( Drg No. FD-84)

PAINTING :- M&L for one coat of painting by means of spray painting with synthetic enameled paint of appropriate shade and quality to steel furniture items (internally & externally complete) including removing of dents & filling with putty after preparation of surfaces thoroughly by using appropriate abrasive cloth emery as required as trade practice complete all as specified and directed. to the following steel furniture items :-

Almirah large steel ( Drg No. FD-1031)

Almirah large steel 1/2H,1/2S ( Drg No. FD/E6/MAP/18)

Almirah medium/small steel ( Drg No. FD-1032)

Almirah medium/small steel 1/2H,1/2S ( Drg No. FD- 1034)

Almirah double decker steel ( Drg No. FD-TP)

Double sleeping bunk ( Drg No. FD-TP)

Locker bed side steel ( Drg No. FD-257,1029)

MS sleeping bunk steel ( Drg No. FD-TP)

Rack adjustable steel 06 tier ( Drg No. FD-1038)

Rack storage steel ( Drg No. FD-TP)

Rack steel 6'x2'x4' ( Drg No. FD-TP )

Rack storage steel SMS ( Drg No. FD-TP)

Table dining Ors steel ( Drg No. FD-165(M))

Table Office Officer's steel ( Drg No. FD-1003)

Table Office Clerk steel ( Drg No. FD- 1004)

Table 3'x2' steel with drawer ( Drg No. FD- 1008)

Trestle store room steel ( Drg No. FD– 1043)

Note:- The total shall subject to adjustment of credit of Rs 55808.10 for old Materials as per Schedule of Credit.

PREM KUMAR KAPILA

PK ENTERPRISES

bharat refrigeration and electric co.