SPL REPAIRS TO UNDERGROUND CABLE AND LT PANELS AT STN HQ AND SECTION HOSPITAL AND PROVN OF SECURITY LIGHTS WITH POLES ON OUTER PERIMETER AT JCOS OR MD ACCN AT SHIVAJI ENCLAVE OD TALEGAON UNDER GE DEHU ROAD

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

Soft / loose soil

Hard / dense soil

Excavation in trenches for errection of poles etc.,n. exc 1.5m wide, exc 1.5m and n. exc 3.0m in depth and getting out in soft / loose soil complete all as specified and directed by Engr-in-charge.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

supply & Laying in repair cable XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter of following sizes:- Make :- Havells/ Polycab/ Gloster

70 Sq mm x 3.5 core

50 Sq mm x 3.5 core

35 Sq mm x 3.5 core

25 Sqmm x 4 Core

16 Sqmm x 4 Core

10 Sqmm x 2 Core

M & L in repair HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

40 mm dia

50 mm dia

M& L for GI tubing 100 mm dia medium grade for cable protection

Supply & erect in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 31 , 09 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole. ( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately) Make : Electrosteel/ Indian Pole/ Singh Profiles/ Kalki tubes & Poles

M&L for provision of PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M & L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth, platforms, pole coping etc., all as specified and as directed.

PCC type B1 1:2:4 (20 mm graded aggregate) as the coping including form work of pole all as specified.

M & L in repairs for earthing with galvanised steel earth plate electrode 60cmx60cmx6.3mm burried directly in ground earth pit not less than 2.25 m deep below normal ground level with top edge of the plate vertically to depth of not less than 1.2m below ground level connected to and including GI strip of size 25 x 4 mm as earthing lead welded with earth electrode (excluding GI protection pipe) and connecting to equipments by means of earthing lead connecting to equipments by means of GI bolts & nuts etc. with provision of char-coal and salt etc. all as per electrical plate No. 3 of SSR Part I, 2009 including RCC cover and MS angle iron frame watering arrangement with GI pipe 20mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc complete all as specified and directed by Engr-in-Charge. Note: Rate quoted deemed to be including excavation by compressor M/C for Soft disintegrated rock to required depth.

Material & labour for cable route indicator made out of Aluminium plate 80 dia, 6 mm thick & fixed over M.S angle iron of size 30 x 30 x 6 mm, 45 cm in length duly painted with Synthetic enamel BLUE paint suitable for LT cable all as specified & including embedded in PCC (1:3:6) type C1 of size 30 x 30 x 20 cm in ground complete all as specified.

Disconnecting electrically andTaking out of old Panel & Supply instal testing and commissioning of CPRI approved factory make LT panel board outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side double door hinge type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3.00mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral Aluminium bus bar of 250 Amps capacity duly mounted on pre cast insulators including earth work excavation, PCC foundation necessary coping work, nuts and bolts and connecting electrically with suitable copper cable lug, cable glands etc complete all as specified and directed to accomodate the following items. Incoming:- (a) MCCB 160 amps 4 pole 16 KA - 1 Nos. (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of L&/Seimens/Schiender (c) LED type indication lamp for RYB. Outgoing: (a) MCCB 40 amps 4 pole 16 KA - 04Nos.

Disconnecting electrically and Taking out of old panel & Supply instal testing and commissioning of CPRI approved factory make LT panel board outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side double door hinge type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3.0mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral Aluminium bus bar of 400 Amps capacity duly mounted on pre cast insulators including earth work excavation, PCC foundation necessary coping work, nuts and bolts and connecting electrically with suitable copper cable lug, cable glands etc complete all as specified and directed to accomodate the following items. Incoming:- (a) MCCB 250 amps 4 pole 16 KA - 1 Nos. (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of L&T /Seimens/Schiender (d) LED type indication lamp for RYB. Outgoing: (a) MCCB 63 amps 4 pole 16 KA - 4 Nos.

Supply & fix cable jointing kit for 1100V XLPE grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable complete all as specified and directed by Engineer-in-Charge. Make :- M-Seal/ Densons/ Dowells

10 to 16 sqmm,3.5/4 core

25 to 50 sqmm,3.5/4 core

Supply and fix Bus bar chamber of size 450 X 300 X 100 mm, outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side top hinged single door type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral Aluminium bus bar of 160 Amps capacity duly mounted on pre cast insulators,arrangement for three outputs from busbar including input MCCB of capacity 160 amps for Switch on/off LT Supply.

Supply & fixing in repair FRP junction box top hinged door of size 240 X 130 X 110 mm for controlling the street/security lights, with four aluminium busbar strips 20X3MM capacity with epoxy insulation fixed on PVC saddles with nut & bolts, cover with color coded caps (RYBB) with and including MCB SP 2.5 Amps capacity, complete all as directed. Make :- Sintex/ National/ L&T

M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

M&L for steel tubular swaged pole complete with MS base plate final taper plug.bolts,nuts& screwes as specified type 410 SP-37,(8.5 mtr) long complete all as specified including applying one coat of aluminum coat over a coat of primer complete.

Supply and fix LED street light 35 W ENDURA CITYLITE PLATINUM PLUS new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover with IP66 protection and resistance of IK07. Cat No : ENDURACITYLITEPLATPLUSSL35WLED757SASYBOPC of havells and equavalant of Bajaj/HPL/phillips and directed by Engr-in-Charge

S&F in repairs street light mounting bracket made out of GI pipe 40 mm dia medium grade not less than with 1.5 m.long in any shape with and including pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts all as direced by Engineer-in-charge.

Material and Labour for sand filling in trenches.

M & L for earthing complete with galvanised steel earth plate electrode 60cm ×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel,earth wire protected by GI pipe 15 mm dia 'light grade' including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1, 40 mm thick RCC cover in 1:2:4 type B-1 reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe 'light grade' 20 mm bore all as shown in electrical plate No. 3 connected to earthing test point all as specified .

Om Sai Enterprises

metro electrical services

SHREE VAIBHAV ELECTRICALS

M/S. Niksun Electro-Infra Private Limited