Building

Name of Work :- Construction of New Food & Drug Laboratory Building at New Mental Campus Meghaninagar, Dist. Ahmedabad.

Memorandum showing items of works to be carried out

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Excavation for foundation upto 1.5 mt. depth including sorting out and stacking of unuseful materials and disposing off the Rupees One Hundred Forty Nine

1 842.00 excavated stuff upto 50 Meter lead. (B) Dense or Hard soil 149.67 CMT ₹

and Sixty Seven Paisas Only

Excavation for foundation upto 1.5 mt. depth including sorting out and stacking of useful materials and disposing off the

Rupees One Hundred Seventeen

2 1684.00 excavated stuff upto 50 Meter lead. (A) Loose or soft soil 117.08 CMT ₹

and Seven Paisas Only

Excavation for foundation upto 1.5 mt. to 3.0 meter depth including sorting out and stacking of unuseful materials and Rupees One Hundred Twenty Nine

disposing off the excavated stuff upto 50 Meter lead. (A) Loose or soft soil and Eighty Paisas Only

Excavation for foundation upto 3.0 mt. to 5.0 meter depth including sorting out and stacking of unuseful materials and

Rupees One Hundred Seventy Four

4 2063.00 disposing off the excavated stuff upto 50 Meter lead. (B) Dense or Hard soil 174.23 CMT ₹

and Twenty Two Paisas Only

Extra for additional depthmore than 5.0m for excavation for foundation including sorting out and stacking of useful Rupees Twenty Nine and Three

materials and disposing of the excavated stuff upto 50 m lead.(C) Hard Murrum Paisas Only

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As

Rupees One Hundred Five and

6 1513.00 Per 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter 105.95 SMT ₹

Ninety Four Paisas Only

give 1 % concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / SMT of surface is

recommended as per I.S

Filling in foundation and plinth with murrum or selected soil in layers of 20 cm. thickness including watering, ramming and

Rupees Two Hundred Eighty Nine

7 1840.00 consolidating etc. complete 289.06 CMT ₹

and Six Paisas Only

Filling available excavated earth (excluding rock) in trenches plinth, sides of foundations etc. in layers Nos.t exceeding 20 cm Rupees One Hundred Thirty and

in depth consolidating each demo sited layer by ramming and watering. Thirty Nine Paisas Only

Filling sunk slab with light material like charu/boxite as directed including cement mortar Plaster 10 mm thick in CM. 1:3 in

all Around Surface (sides of Beams and top of sunk slab) making the surface clean and attractive as design at any height etc Rupees Seven Hundred Forty and

9 48.00 complete as directed by Engineer in-Charge. with all lead and lift upto height 25 RMT. 740.85 CMT ₹

Eighty Four Paisas Only

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm Nos.minal

Rupees Three Thousand Six

size including cost of formwork in) and curing complete

10 457.00 3697.91 Hundred Ninety Seven and Ninety CMT ₹

(A) foundation and plinth

One Paisas Only

Providing and laying cement concrete 1:2:4 (1 Cement : 2 coase sand : 4 graded stone aggregrate 20mm Nos.minal size)

and curing complete inlcluding cost of form work But exludig the cost of reinforcement for reinforced cement concrete

work in Slabs, Landing, Shelves,Balconis up to floor two level plinth slab Rupees Four Thousand Fifty Two

and Fifty Nine Paisas Only

Providing and laying TMT bar FE500D reinforcement for all R.C.C. work including bending, binding,and placing in position

Rupees Seventy Eight and Twenty

12 1049732.71 complete upto 6th floor level 78.21 Kg ₹

One Paisas Only

Providing and laying in position Ready Mixed M-350 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of Rupees Five Thousand Eight

13 1440.00 centering shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended 5886.28 Hundred Eighty Six and Twenty Eight CMT ₹

proportions as per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing Paisas Only

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov

(A) Footing and Foundation

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of

centering shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended

Rupees Eight Thousand Twenty

14 972.00 proportions as per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing 8022.43 CMT ₹

Two and Forty Three Paisas Only

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of Rupees Six Thousand Seven

15 1130.00 centering shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended 6768.01 Hundred Sixty Eight and One Paisas CMT ₹

proportions as per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing Only

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov

GR 410 kg) (B)Beams

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of Rupees Seven Thousand Nine

16 1157.00 centering shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended 7950.72 Hundred Fifty and Seventy Two CMT ₹

proportions as per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing Paisas Only

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov

GR 410 kg) (C)Slab

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of

Rupees Six Thousand Five Hundred

17 205.00 centering shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended 6581.16 CMT ₹

Eighty One and Sixteen Paisas Only

proportions as per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov

GR 410 kg) (D)Weather Shed/Chajja

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of

Rupees Six Thousand Five Hundred

18 277.00 centering shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended 6509.45 CMT ₹

Nine and Forty Five Paisas Only

proportions as per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov

GR 410 kg) (E)Lintel, Sill / Coping

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of Rupees Ten Thousand Three

19 100.00 centering shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended 10390.88 Hundred Ninety and Eighty Eight CMT ₹

proportions as per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing Paisas Only

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov

GR 410 kg) (F)Vertical Mullion

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of

Rupees Six Thousand Fifty Five and

20 191.00 centering shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended 6055.96 CMT ₹

Ninety Six Paisas Only

proportions as per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov

GR 410 kg) (G)Staircase

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of Rupees Seven Thousand Two

21 649.00 centering shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended 7235.64 Hundred Thirty Five and Sixty Four CMT ₹

proportions as per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing Paisas Only

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov

GR 410 kg) (H)Retaining Wall / RCC Wall

Brick work using common burnt clay conventional building bricks having crushing strength Nos.t less than 35 kg/Sq. Cm. in

Rupees Four Thousand Twenty One

22 93.00 foundation and plinth in cement mortar 1:6(I cement : 6 fine sand) 4021.02 CMT ₹

and Two Paisas Only

(B) Conventional

Masonary work using Aerated light weight concrete block having crushing strength Nos.t less than 35 kg/sqcm for super Rupees Four Thousand Five

23 2549.00 structure above plinth level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical Specification up to 5th 4596.06 Hundred Ninety Six and Five Paisas CMT ₹

floor level. Only

Half Masonary work using Aerated light weight concrete block having crushing strength Nos.t less than 35 kg/sqcm for Rupees Four Thousand Five

24 248.00 super structure above plinth level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical Specification up 4596.06 Hundred Ninety Six and Five Paisas CMT ₹

to 5th floor level. Only

P/A 10 mm thick cement plaster in single coat on fair side of CEILING SURFACE/SLOPING ROOF etc. for upto 5th floor

finished even and smooth in C.M. 1:3 (1 cement : 3 sand) including finishing with floating coat of neat cement slurry Rupees Two Hundred Forty and

including necessary curing, scaffolding in true line and level etc. complete As per Architect instructions and drawing or as Eighty Six Paisas Only

directed by engineer in charge.

P/A 15 mm thick cement plaster in single coat on fair/ rough side of brick or concrete wall for interior/ exterior plastering

finished even and smooth in C.M. 1:4 (1 cement : 4 sand) including finishing with floating coat of neat cement slurry Rupees Two Hundred Forty Nine

including necessary curing, scaffolding in true line and level etc. complete As per Architect instructions and drawing or as and Ninety One Paisas Only

directed by engineer in charge upto 5th floor level.

20mm thick sand faced cement plaster on Exterior walls upto 5th floor level consisting of 12 mm thick backing coat of cm

1:3 ( 1 cement : 3 sand) and 8 mm thick finishing coat of cm 1:1 ( 1 Cement : 1sand) with dewatering of sand granuals by Rupees Three Hundred and Sixty

sponge block or sparying sand mixture with hand operated machine as directed by Engineer in charge etc complete Five Paisas Only

Providing and laying 18 mm thick polished granite stone machine cut in single piece (Max. available) in sill and jambs of

Rupees Three Thousand Five

door laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement slurry with

28 770.00 3578.43 Hundred Seventy Eight and Forty SMT ₹

matching pigment incl. rubbing and polishing half rounding edge etc. complete colour and shed as approved by architect

Three Paisas Only

engineer in charge.

Providing and applying a seamless lightweight multi- layered system comprising of primer and finish coat of self levelling

epoxy.2mm thick Self Levelling Epoxy Flooring System which consist of surface preparation, primer coat and with 2mm thick

Rupees One Thousand Two

self levelling epoxy. excluding the cost of Completely dried 50mm thick cement sand bedding primary IPS layer finished with

29 3708.00 1282.70 Hundred Eighty Two and Seventy SMT ₹

FLORPRIME EP/FLORPRIME WB. Then Apply top coat FLORGARD SL of 2mm thickness of standard make with approved

colour and floor pattern design by architect applied as a top coat. Surface will be useable after 48hour of drying etc. Comp.

as per the instructions of I/C.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm Nos.minal Rupees Three Hundred Fifty One

size) laid in one layer finished with a floating coat of neat cement. (B) IPS 50MM THICK and Fifty Six Paisas Only

Providing and applying a seamless lightweight multi- layered system comprising of primer and finish coat 75 mm thick

epoxy coving on the wall to floor joint epoxy 75mm thick Epoxy Coving System which consist of surface preparation, primer

coat. Make coving (VATA) coving with Florscreed C , finish putty with Florscreed C and silica micro. Then Apply two coat Rupees Four Hundred Twenty Nine

Florthane-PU paint of standerd make with approved colour and floor pattern design by architect applied as a top coat. After and Twenty Five Paisas Only

48hour of drying etc. Comp. as per the instructions of I/C.

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Providing and fixing 0.90 meter wide and 0.75mt. height sandwitch type platform including supplying and fixing granite

stone 18 mm thick mirror polisdhd 1st quality Granite stones in top and side posiition and vertical strip at front over

Rupees Four Thousand Seven

mm thick polished kotah stone platform fixing in top and sides and itermediates supports fixing with cement mortar and

32 31.00 4708.62 Hundred Eight and Sixty Two Paisas SMT ₹

adhesivee and finishing including providing cutting for fixing kitchen/Laoratory sink (as directed) 610 mm x 460 mm x

mm size stainless steel sink / viterious china sink(as directed by engineer incharge) at required position etc complete

Providing & fixing wall dado of first quality Ceramic finished tiles of standard brand of 30x 45 cm size,approved colour and

approved pattern or design set, in 3mm tile fixing adhesive slurry of standard make adhesive over a min 12 mm thick 1:4

Rupees One Thousand Thirty Eight

33 473.00 single coat cement plaster ( Mala plaster) with proper line and level. Joints shall be filled with self matching colour cement , 1038.39 SMT ₹

and Thirty Nine Paisas Only

curing and cleaning with mild oxalic acid etc. complete as directed by Engineer-in-charge.

Providing and laying polished Granite stone slab 25mm thick in flooring,risers of steps, skirting Dedo and pillars laid on

Rupees Three Thousand Six

20mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury including rubbing and

34 1611.00 3683.47 Hundred Eighty Three and Forty SMT ₹

polishing etc. complete. as per instructions of EIC.

Seven Paisas Only

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

Rupees One Thousand Three

on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with

35 314.00 1397.83 Hundred Ninety Seven and Eighty SMT ₹

color cement slurry including finised with flush pointing & cleaning the surface etc. complete for Anti skid

Two Paisas Only

P & L 60x120 cm. Matt/Glossy vitrified Tiles flooring 8 - 10mm Thick Tiles flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including Rupees One Thousand Seven

36 4023.00 dismentaling of existing flooring and jointed 3 MM EPOXY GROOVE with color cement slurry including finised with flush 1736.19 Hundred Thirty Six and Nineteen SMT ₹

pointing & cleaning the surface etc. complete and Colour Shade approved by Engineer-In-Charge. Paisas Only

P/L & fixing Elevation facia Dholpuri Stone tiles of 300x200 mm size 15-20mm thickness with natural rough surface

approved colour & quality for elevation treatment on vertical wall with 15 mm thick single coat 1:6 mala cement plaster

Rupees One Thousand Five

for leveling fixing the tiles on the face with Roff Stone Tiles adhesive madeup of blended powder polymer modified cement

37 113.52 1522.03 Hundred Twenty Two and Two SMT ₹

based tiles Adhesive applied strictly as per laying process recomonded by manufectures in 3 to 4mm thick paste layer on

wall and on back side of the tiles fixed in true line & level without leaving any joints open including cleaning, curing etc.

complete as directed by engineer in charge.

Providing and fixing both sides polished Black Premium quality granite stone slab table rubbed, edges rounded and polished

of size 75x50 cm deep and 18 mm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter

Rupees Three Thousand Forty Six

38 14.00 and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded 3046.16 SMT ₹

and Sixteen Paisas Only

stone aggregate 6 mm Nos.minal size) as per direction of Engineer-in-charge and finished smooth.

Pro. And fixing single layerwater proof gypsum board12.5mmthick sections usingwater proof board of size 1220mmx

1830mmx 8.0mm suspended by GI suspender channel of size 25mmx3mm with intermediate channel og size 18mmx40mmx

0.8mm at 1220mm center to center ceiling section of size 40mm x35mm x0.55mm at 457mmc/c and perimeter channel A of Rupees Six Hundred Six and Ninety

size 20mm x 27mmx 30mmx 0.5mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scochbolt Four Paisas Only

connectingcleat,joining compound top coat onceiling incl.making necy.opening for light fitting, diffuseretc. comp.

asperdetail drawingas directed

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified

edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85%

Nos.n-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for

the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be

laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120

grams per SMT including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out

of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be Rupees One Thousand Six

40 2816.10 interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a 1648.96 Hundred Forty Eight and Ninety Five SMT ₹

perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of Paisas Only

rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified

edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including,

cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required,

Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm

dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced

at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester

baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.

Provinding and fxing M.S. Grill of given design pattern M.S.flats,angles, solid or hollow bars , prewelded wire mesh at

required spacings and fixed in frame to masonry or RCC and making finish with plaster etc. with as per detail design

Rupees One Hundred One and

41 8107.00 drawings including applying Priming Coat of red oxide paint and two coat of standard make approved oil paint colour etc 101.17 Kg ₹

Seventeen Paisas Only

(b) plain grill

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat

Rupees Eight Thousand Four

of read lead paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in

42 20.55 8413.48 Hundred Thirteen and Forty Eight Quint ₹

main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

Providing and fixing standard make Wood grain colour , water proof Solid Section Door Frame made up of wood partical

powder and Poly Vinyl Chloride PVC rasins composite WPC high pressure density 0.78 to 0.90 Kg/m3 molded section double

rebated door frames of 100X 60 mm size frame section cut to opening size with fixing of toung and groove joints with

Rupees Six Hundred Forty Three

43 490.00 Fevicol SH adhesive fixed joints for vertical and horizontal members including 100mm long SS screw as frame holdfast fixed 643.37 RMT ₹

and Thirty Seven Paisas Only

in a wall masonary or RCC opening sides including molding pattis of same material etc. comp. As per Architect instructions

and drawing or as directed by engineer in charge.

Providing, making & fixing 28 mm thick water proof medium density PVC DOOR SHUTTER with 1mm thick approved make

colour and make Laminate on both sides with PVC adhesive tap beeding on all sides shall be provided with standard

approved make 150x3mm S.S. heavy hinges fixed with SS screws. 200mm S.S. door stopper inside top, 300mm SS Aldrop

Rupees Five Thousand Seventy Five

44 184.00 inside, 300mm heavy type SS front aldrop fixed with SS screws and bolts including Rubber stopper and back side nylon 5075.25 SMT ₹

and Twenty Five Paisas Only

buffer stop. etc. comp. as per architect’s instructions supervision of IC. Hardware SS 304 Hinges size 127x76x3.4mm, Door

Handle ,two Nos. of 20cm long ss holdrop and Tower Bolt Round Bar 12mmØ,

Providing and fixing 120 Min. Fire Rating Fully Metal Solid Fire Door made up of SMPS (Sheet Metal Press Section) door

frame of 1.6mm thick 143x57mm and 46mm wide steel channel frame structure for the single shutter with 1.2mm thick

steel plate welded on both sides of fire door including SS bolt 100x75x3mm size Hinges and outer side Mortise handle lock Rupees Eleven Thousand One

45 52.95 and internal Single point push bar with push bar unlocking system from inside all frames and door shutters are primed with 21238.28 Hundred Twenty Eight and Eighteen SMT ₹

Zinc-Phosphate Stoving Primer and finished with Polyurethane Aliphatic grade or epoxy paint comp. As per Architect Paisas Only

instructions and drawing or as directed by engineer in charge.

Supply and Installation of Automatic Sliding door, sliding panels of 10mm plain toughnened glass enclosed within ST-Flex

frame profiles with accessories, Operator shall be ES 200 easy, 4150mm Microprocessor controlled, Self learning and self

monitoring, modular operator design, Produced according to the guidelines for power-operated windows, doors and gates

Rupees Sixty Six Thousand Eight

BGR 232, the UVV and the VDE regulations. TÜV design tested, Adjustable closing & opening speed, adjustable hold-open

46 320.00 66899.37 Hundred Ninety Nine and Thirty SMT ₹

time, Auto Error Display, with Error Code Display for error correction Connection: 230 V, 50/60 Hz, UPS Supply. Clear

Seven Paisas Only

opening size 1.50mt & 2.00mt and hight 2.40mt Max door weight: 2 panels X 100 kgs & 1 panel X 120 kg. The above work

complete in all respect as per approved drawings and to the satisfaction of engineer-in-charge / architect consultant.

Providing, Assembling and fixing of Aluminum special section DGU fixed glass panel and two openable shutter WINDOWS

with PVDF coating of approved colour as per architects drawing and details made up of standard make Frame section Size

40X68.4X2mm 1.40 Kg/Mt and Mullion section size 53.5x40x1.70mm 0.723Kg/Mt and Shutter Section size 44.5x42x1.2MM Rupees Three Thousand Nine

47 476.00 WT 0.574 Kg/Mt. with suitable round type clip section size 31.50X25.0X1.1mm thick wt0.246 kg/mt. and SS top bottom 3967.28 Hundred Sixty Seven and Twenty SMT ₹

telescopic type hinges and handle lock and wind stay of same colour and finish. Standard make 5mm thick plain sheet glass Eight Paisas Only

with 8mm gap fixed with EPDN rubber gasket etc.comp. As per approved sample and instructions of EIC.

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

providing and fixing alluminiumapproved colour powder coating of 50 micron thickness single shutters Doors having

standared extruded alluminium colour aNos.dized hollow sections Prtly Openable and Partly Fixed Type With frame of size

101 mm x 44.5 mm x 2 MM (aproximate wt 2.60 kg per RMT) and door styles and top rail of alluminium section size

mm x 44.5 mm x 2 MM (approximate wt 1.25 kg per RMT) and bottom rail and lock rail per door of size 114 mm x 44.5 mm

Rupees Four Thousand One

x 2 MM tHICK ( aproximate wt 2.75 kg per RMT) and providing rubber gasket and glazing clips around the glass all over

48 98.00 4173.32 Hundred Seventy Three and Thirty SMT ₹

including providing 9 mm thick decorative water proof Both side prelaminataed pressed wood based board with fixing

Two Paisas Only

Glasing clips 19 X 17 mm including providing heavy Duty locks, handels, stopers, floor spring, door closers and Ground Glass

5 mm thick (Frosted or obscured on one side) on top with fixing Glasing clips 19 X 17 mm including all labour and

equipments etc complete

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Rupees One Thousand One

49 21.00 Wt. 0.643kg per mt) with colour aNos.dized alluminium frame for ventilation with 5 mm thick frosted glass as details etc 1175.56 Hundred Seventy Five and Fifty Five SMT ₹

complete for Ventilation approved by Engineer in-charge. as per drawings. Paisas Only

Providing, Assembling and fixing of Aluminum special section FIXED GLASS PANEL PARTITIONS made up of standard make

Alloy 6063 T6 section frame Art 1007929 38.50x40x1.5mm size wt 0.637kg/RMT and center mullion frame Art

53.50x40x1.7mm wt 0.723kg/RMT with suitable round type clip section size 31.50X25.0X1.1mm thick wt0.246 kg/mt. fixed

glass panel 5mm plain double glass glazing with 8mm gap including PVDF coating of approved colour. All fixed with dash Rupees Two Thousand Eight

50 756.00 fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 2843.15 Hundred Forty Three and Fifteen SMT ₹

required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed Paisas Only

mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless

steel screws, all complete as per architects drawing and details.

Providing and fixing of supply & drain pipe duct covering with openable door structure system using extruded aluminium

section of standard make of virgin aluminium. The section of 50X25X2.3mm thick (aproximate wt 0.873 kg per RMT)

rectangular hollow pipes structure erected as per the Architect’s drawings with door opening on both side. The 1.50mm Rupees Two Thousand Three

51 754.00 thick aluminium louver secontion sheet 62.50X11.30X1.50mm thick (aproximate wt 0.262 kg per RMT) strips fixed over 2349.26 Hundred Forty Nine and Twenty Six SMT ₹

aluminium frame vertical structure with SS screws at 150mm distance keeping 30mm open gap. The 50 micron aNos.dised Paisas Only

colour of the aluminium louver secontion and hollow pipes frame to be approved by Project Architect.

Providing, Assembling and fixing of Aluminum special section openable DOORS with fixed frame 2002962 102X44.5X2.5mm

wt 1.437kg/RMT made up of standard make shutter section top 2002817/H 47.50X44.5X1.65mm wt 0.847kg/RMT and

bottom 2002873/H 114X44.5X1.7mm wt 1.49kg/RMT verticals sections art 2002876/H 46X44.5X1.91 wt 1.10kg/RMT shutter

round type clip section 1007970 31.5X25X1.1mm wt 0.246kg/mt with 5mm plain double glass glazing with 8mm gap

including PVDF coating of approved colour with havey duty floor spring opening system shutter and handle mortise handles Rupees Five Thousand Three

52 120.00 and lock of SS finish. All fixed with dash fasteners of required dia and size, including necessary filling up the gaps at 5392.39 Hundred Ninety Two and Thirty Nine SMT ₹

junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be Paisas Only

smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap

beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architects drawing and details.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade

Rupees One Hundred Fourteen and

53 6259.00 after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc completed. 114.53 SMT ₹

Fifty Three Paisas Only

Providing & applying internal Antifungal Paint in two coat applied with brush or roller on internal walls. Newly plaster

surface must be prepared and clean after applying primer coat and polymer putty incloding drying rubbing with sand paper

to make it smooth. After drying applied water mixed primer coat of Apurva make Walgard WBA after curing and drying Rupees One Hundred Seventy One

apply two coats of Walgard WBA antifungal paint of approved colour shed upto 2.40mt height on all laboratory wall in and and Seventy Paisas Only

interval of 7-10 hour As per the approval of architect and instructed by engineer in charge.

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new

wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.up to 10 mt height including cleaning and washing of all surfaces of window and door Rupees Forty and Fifty Nine Paisas

frame including shutters and floors as per satisfaction of EIC. (for wall area only) Only

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Colouring of wall (Two coats) with oil bound washable acrylic paint of approved brand and manufacture & required shade

on wall and or Ceilling surface to give an even shade , over and including putty and priming coat with a distemper primer of

approved brand & manufacturer after Hand Scraper etc thoroughly brushing the surface to give an even shade free from Rupees Seventy Six and Eighty Four

56 10996.65 mortar droppings and other foreign matter and also including preparing the surface even and smooth. (for ceiling and beam 76.84 SMT ₹

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering

Rupees Twenty Three and Sixty

57 1295.00 etc. complete. 23.68 RMT ₹

Eight Paisas Only

Providing and Applying for a tough watertight barrier and also decorative appeal on external walls, one component, High

Quality Acrylic Copolymer Exterior Decorative Wall Coating for excellent scrub resistance, low dirt picks up, excellent

exterior durability and resistance to efflorescence on vertical surfaces. Architects approved colour, After proper cleaning Rupees One Hundred Seventy One

58 6259.00 making base surface free from any dust and loose particle, rust, oil. surfaces are correctly prepared prior to application. 171.70 SMT ₹

and Seventy Paisas Only

Pinholes, Cracks should be filled with epoxy putty. Two coat can apply with brush or roller with proper drying etc. comp.

under strict supervision of EIC.

Providing and Applying EPOSEAL two component, seamless and hygienic finish solvent free epoxy coating in rain water

harvesting underground water storage tanks, sunk slabs. Coating must be hygiene Conforms to USFDA Regulation - 21 CFR

175.300, corrosion resistance, chemical resistance, Eco-friendly, Low VOC, water based with a high level of mechanical and Rupees Six Hundred Forty One and

chemical resistance on any smooth cement plaster surface in two even coats applied with brush or roller with proper drying Thirty Five Paisas Only

etc. comp. under strict supervision of EIC.

Providing and Fixing 90 cm high stainless steel railing made from anticorrosive 304 grade S.S. Staircase Railing modular type

welded fitting (S-Rail SR11 Square Type Steel Baluster),Main hand Rail pipe (DASA Pipe) 50mm outer dia 1.2 mm Thickness

Rupees One Thousand Nine

SS 304 Grade, Balustar steel round type & 38mm outer dia. 1.2mm thickness ss 304 pipe 3 pipe below main dasa pipe

60 152.00 1978.59 Hundred Seventy Eight and Fifty RMT ₹

mm outer dia. 1.2mm thickness ss304 grade as a vertical support fixed in RCC slab S.S. pipe with steel modular type fitting

Nine Paisas Only

baluster including accessories as per detailed drawing as directed etc. complete for all floors.

Fabricating, Supply and Fixing in position SS Daso for staircase with brush finish and SS 304 grade as per Indian standard and

Rupees Six Hundred Ninety Two

61 204.00 detailed drawing including grinding,cleaning and filling the welded spots with SS finish (only Length will be paid for payment 692.86 RMT ₹

and Eighty Six Paisas Only

). The work to be executed as per Architect drawing and E.I.C.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their

entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, Rupees Four Thousand Four

62 60.00 guide channels and arragements for inside and outside locking with push-pull operation including the cost of hood cover 4495.02 Hundred Ninety Five and One SMT ₹

and spring etc. complete. Paisas Only

(B) Shutters having width 3.5 M. and above.

Providing and laying china mosic type water proofing treatment on tarrace including (a) applying neat cement slurry

Kg/SMT of cement admixed with water proofing compound after cleaning the surface (b) laying cement concrete using

brick bats 25 to 100 mm size with 50% of C M 1:5 ( 1 cement : 5 coarse sand) admised with water proofing compound over

Rupees One Thousand One

20 mm thick layer of C M 1:5 to required slope including rounding of junctions of walls and slab (C) After two days of proper

63 1452.00 1137.26 Hundred Thirty Seven and Twenty SMT ₹

curing applying a second coat of cement slurry (d) finishing ghe surface with 20 mm thick C M 1:4 and china mosic tilling &

Six Paisas Only

finaly finishing the surface with trowel with white cement slurry (e) after finishing the whole tarace shall be flooded with

water for a period of two weeks (the item is included 10 years performance guaranty with bond).

Providing & fixing –Roller blind with head rail as standerd make – with necessary fitting with fabric shadeas. The fabric

Rupees One Thousand Sixty Three

64 476.00 is 100% polyester with epi- -176 the weight of fabric – 390 gsm-as warp-80 den twisted & weft -300 den roto as max width 1063.53 SMT ₹

and Fifty Three Paisas Only

of fabric-230 cm.as per instruction of Architect & E.I.C.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with Rupees Nine Hundred Ninety Two

pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick and Sixty Five Paisas Only

Providing and fixing pre-cast Rubber Dye/steel Dye interlocking concrete block 60mm thick with grade of concrete M300

pnumatic compressed/vibrated mechanically and as per approved design Confirming toIS15658:2006 including 35mm Sand Rupees Six Hundred Eighty Six and

layer for levelling and filling the joint with sandin proper line and level as per guidlines of IRC:SP63 2018 etc. Complete. Ninety Paisas Only

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm

Rupees Three Hundred Eighty and

67 656.00 thick of M200 grade concret as per approved design and including excavation for fixing inproper line and level,filling the 380.19 RMT ₹

Nineteen Paisas Only

joint with C:M 1:3 (1cement:3fine sand) etc complete.

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Making core cutting for fixing pipe in RCC slab/wall/beam up to 300 mm wide (length of Core cutting) for plumbing lines,

Rupees One Thousand Ninety Six

68 20.00 drainage lines, HVAC & electrical pipes fittings as per detailed drawing and as directed by engineer in charge. (a) 0.20 x 0.275 1096.46 Nos. ₹

and Forty Five Paisas Only

Making core cutting for fixing pipe in RCC slab/wall/beam up to 300 mm wide (length of Core cutting) for plumbing lines,

Rupees One Thousand Ninety Six

69 175.00 drainage lines, HVAC & electrical pipes fittings as per detailed drawing and as directed by engineer in charge. b) 0.15 x 0.275 1096.46 Nos. ₹

and Forty Five Paisas Only

Making core cutting for fixing pipe in RCC slab/wall/beam up to 300 mm wide (length of Core cutting) for plumbing lines,

Rupees Eight Hundred Twenty Two

70 85.00 drainage lines, HVAC & electrical pipes fittings as per detailed drawing and as directed by engineer in charge. c) 0.15 x 0.150 822.34 Nos. ₹

and Thirty Four Paisas Only

Making core cutting for fixing pipe in RCC slab/wall/beam up to 300 mm wide (length of Core cutting) for plumbing lines,

Rupees Eight Hundred Twenty Two

71 75.00 drainage lines, HVAC & electrical pipes fittings as per detailed drawing and as directed by engineer in charge. d) 0.025 x 822.34 Nos. ₹

and Thirty Four Paisas Only

Making core cutting for fixing pipe in RCC slab/wall/beam up to 300 mm wide (length of Core cutting) for plumbing lines,

Rupees Eight Hundred Twenty Two

72 36.00 drainage lines, HVAC & electrical pipes fittings as per detailed drawing and as directed by engineer in charge. e) 0.063 x 822.34 Nos. ₹

and Thirty Four Paisas Only

Making core cutting for fixing pipe in RCC slab/wall/beam up to 300 mm wide (length of Core cutting) for plumbing lines,

Rupees Eight Hundred Twenty Two

73 52.00 drainage lines, HVAC & electrical pipes fittings as per detailed drawing and as directed by engineer in charge. f) 0.15 x 0.230 822.34 Nos. ₹

and Thirty Four Paisas Only

Footing, Basement Raft Waterproofing All surfaces shall be free from oil, grease, friable matter, and general curing

compounds. Concrete surfaces shall be cleaned using high pressure water jetting, grinding or other methods approved by

the Engineer/ as recommended by manufacturer, Any visible cracks, honeycombs need to be treated with E polymer

modified Repair mortar (using Planicrete SBR with Cement:Sand -1:3 or Mapegrout T60) from MAPEI Range. Supplying and

installing positive side waterproofing treatment for “required area’’ by using a pre – applied, flexible 1.2mm thick fully

bonded self adhering, sanded HDPE sheet membrane Mapeproof ALS AP. The fully bonded HDPE sheet membrane shall

consist of a thick white HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which Rupees One Thousand Two

74 1860.00 bonds integrally to poured concrete of base slab. An intimate bond is formed to the poured in-situ structural concrete by 1269.48 Hundred Sixty Nine and Forty Seven SMT ₹

means of a pressure sensitive adhesive preventing lateral water and moisture migration between the membrane and Paisas Only

structure. The HDPE Sheets are overlapped to a min. of 75mm using double side adhesive tape Mapeproof ALS D10 AP

along breadth and inbuilt adhesive strip along the length of the membrane. The fully bonded HDPE Sheet waterproofing

membrane shall have the properties such as Resist hydrostatic pressure of upto 70m head of water, Puncture resistance of

≥1100 N (as per ASTM E154), Elongation of ≥700%; Tensile strength of ≥21 N/mm²; peel adhesion to concrete ≥ 1100 N/m.

WATERPROOFING TREATMENT AT BASEMENT WALL :Providing and applying integral crystalline slurry of hydrophilic in

nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs,

podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio

of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber

brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by Rupees Four Hundred Seventy

more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative Seven and Sixty Two Paisas Only

side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out

all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry

guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per SMT per coat etc complete as

directed by EIC at all floor level.

Providing and applying Acrylic-Modified Cementitious Coating / Polyurethane-Based Anti-Carbonation Coating system for

waterproofing and protection treatment to exposed RCC structural members such as columns and beams on external faces,

including surface preparation by cleaning, removal of loose particles, repair of miNos.r surface defects, application of

primer (if required), and applying approved coating system in specified number of coats as per manufacturer’s Rupees Six Hundred Fifty Six and

specifications to achieve waterproofing, anti-carbonation protection, resistance against ingress of moisture, chloride ions, Fifty Paisas Only

and atmospheric pollutants, complete in all respects including labour, materials, scaffolding, tools, surface finishing, curing,

and necessary accessories as directed by Engineer-in-Charge.

Dispose of loose excavated stuff from Food & drug laboratory building work site to (9 km) Rupees Ninety Eight and Seventy

Four Paisas Only

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing

(with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a)

Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III

(the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of Rupees Three Thousand Five

78 450.00 the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. 3545.61 Hundred Forty Five and Sixty Paisas SMT ₹

gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- CMT- Only

smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against

fire hazard including:

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes,

sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural

glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor

fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of

the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant

and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and

controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of

approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as

required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing

to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it

watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required),

making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of

designing, labour for fabricating and installation of aluminium grid, installation of glazed units (IGUs), T&P, scaffolding and

other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as

described above and as specified.

The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural

designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of

the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as

specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall

provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the

Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the

Engineer- in-Charge.

Providing & fixing Aluminum composite panel of Alcobond with approved grade of 4 mm thick (0.5+3+0.5).The composite

panel should be made of 3 mm thick,100% virgin polyethylene core of LDPE sandwiched between two skins of

mm thick aluminum sheet of which one side is having three layers of as 02.PVDF coating with kyanar 500 paint to

ensure the superior corrosion resistance and weather ability and the other side is service coated with Epoxy paint Rupees Three Thousand One

(Grey).The adhesive used DUBOND for bonding the two skins which can take 8 to 9 kg of weight to separate. This Hundred Thirty One Only

includes structural frames for fixing and finishing etc complete for wall paneling, Colour as approved by the architect etc

completed as directed by E.T.C/PMC .

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes

Rupees One Thousand Six

and making good the same including fixing standard make CP Brass bottle trap, 40 mm dia. C.P. brass waste cuplin and PVC

80 40.00 1609.81 Hundred Nine and Eighty Paisas Nos. ₹

Supply pipe, Rubberplug for sinkorwash basin, M.I. fisher union for wash basin or sink. (B) 40mm dia.. etc. complete As per

Architect approval and as directed by engineer in charge.

P/F white glazed earthenware EUROPEAN type water closet of standard make fixing P or S trap including fixing 12.5 lt.

Rupees Four Thousand Nine

flushing cistern tank with intrnal fittings, fixed in white water proof cement slurry with curing in true line and level etc.

81 52.00 4974.25 Hundred Seventy Four and Twenty Each ₹

complete with standard make PVC Seat Cover with CP Brass standard make Jet Spray As per Architect approval and as

Five Paisas Only

directed by engineer in charge.

Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc. complete.(A) White

Rupees One Thousand Thirty Six

82 25.00 earthenware flat back or corner type size 430mm x 260mm x 350mm. 1036.27 Each ₹

and Twenty Seven Paisas Only

Providing & Fixing Standard make and quality 600mmx20mm CP brass Crome Plated Towel Rack comp.. With CP brackets

Rupees Six Hundred Three and

83 50.00 fixed to wooden plug with CP brass screws. As per Architect approval and as directed by engineer in charge. 603.19 Nos. ₹

Nineteen Paisas Only

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Providing & Fixing Standard make and quality 600 mm x 600 mm beveled edge 4mm thick mirror of superior glass mounted

Rupees Eight Hundred Thirty Three

84 50.00 on 6 mm thick PVC sheet fixed to wall with PVC Hole plug SS screws and washers etc. comp. As per Architect approval and 833.73 Nos. ₹

and Seventy Three Paisas Only

as directed by engineer in charge.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. 15mmdia Rupees Three Hundred Eight and

Seventy Two Paisas Only

Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws down Bib Tap. 15mm dia Rupees One Hundred Eighty Six

and Eighty Two Paisas Only

Providing and fixing brass screw down stop tap. with wall flanges 25mm dia Rupees Two Hundred Twenty and

Eighty One Paisas Only

P/F 15 mm dia brass Angel Valve with Wall Flange of equivalent approved quality including fixing in pipe line etc. complete Rupees Four Hundred Thirty Nine

As per Architect approval as directed by engineer in charge. and Thirty Five Paisas Only

Providing and fixing MS metal half turn lever valve with Wall Flange approved quality including fixing in pipe line etc.

Rupees Three Hundred Seventy

89 25.00 complete As per Architect approval as directed by engineer in charge. (A) 15 mm. dia. 378.75 Each ₹

Eight and Seventy Five Paisas Only

Providing and fixing MS metal half turn lever valve with Wall Flange approved quality including fixing in pipe line etc.

Rupees Five Hundred Thirty Three

90 25.00 complete As per Architect approval as directed by engineer in charge. (B) 25 mm. dia. 533.48 Each ₹

and Forty Eight Paisas Only

P/F gun metal check or Nos.n return full way Wheel valve standard make in pipeline of approved quality etc. complete As Rupees Four Hundred Twenty and

per Architect instructions and drawing or as directed by engineer in charge. (C) 25mm dia. Sixty Three Paisas Only

P/F gun metal check or Nos.n return full way Wheel valve standard make in pipeline of approved quality etc. complete As

Rupees Three Hundred Fourteen

92 18.00 per Architect instructions and drawing or as directed by engineer in charge. (D) 32mm dia. 314.73 Nos. ₹

and Seventy Two Paisas Only

P/F gun metal check or Nos.n return full way Wheel valve standard make in pipeline of approved quality etc. complete As Rupees Six Hundred Sixty Three

per Architect instructions and drawing or as directed by engineer in charge. (E) 40mm dia. and Forty Two Paisas Only

Providing laying & jointing in true line and level UPVC Pipe (SCH 40) for cold water including fittings, as per approved by

engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concelled as Rupees Seventy Two and Sixty Four

directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, Paisas Only

including the cost of all materials. (A) 15 mm : Service line

Providing laying & jointing in true line and level UPVC Pipe (SCH 40) for cold water including fittings, as per approved by

engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concelled as Rupees Ninety One and Eighty

directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, Three Paisas Only

including the cost of all materials. (B) 25 mm : Service line

Providing laying & jointing in true line and level UPVC Pipe (SCH 40) for cold water including fittings, as per approved by

engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concelled as Rupees One Hundred Forty Eight

directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, and Eleven Paisas Only

including the cost of all materials. (C) 40 mm : service line

Providing laying & jointing in true line and level UPVC Pipe (SCH 40) for cold water including fittings, as per approved by

engineer in charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concelled as Rupees One Hundred Ninety Five

directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, and Sixty Six Paisas Only

including the cost of all materials. (D) 50 mm : service line

Providing & Fixing concealed center point to wall ceiling & floor C PVC (SDR 13.5) pipe having nathional sanitation

Rupees One Hundred Sixty Six and

98 280.00 Foundation (NSF) seal for potable water of following dia. Nos.minal bore tube fittings and clamps including making good 166.86 RMT ₹

Eighty Six Paisas Only

the wall,ceiling and floor etc. comp. As directed by EIC. (A) 15 mm : Service line

Providing & Fixing concealed center point to wall ceiling & floor C PVC (SDR 13.5) pipe having nathional sanitation

Rupees Two Hundred Forty Nine

99 560.00 Foundation (NSF) seal for potable water of following dia. Nos.minal bore tube fittings and clamps including making good 249.72 RMT ₹

and Seventy Two Paisas Only

the wall,ceiling and floor etc. comp. As directed by EIC. (B) 25 mm : Service line

Providing & Fixing concealed center point to wall ceiling & floor C PVC (SDR 13.5) pipe having nathional sanitation

Rupees Four Hundred Forty Two

100 600.00 Foundation (NSF) seal for potable water of following dia. Nos.minal bore tube fittings and clamps including making good 442.04 RMT ₹

and Three Paisas Only

the wall,ceiling and floor etc. comp. As directed by EIC. (C) 40 mm : service line

Providing & Fixing concealed center point to wall ceiling & floor C PVC (SDR 13.5) pipe having nathional sanitation

Rupees Six Hundred Fifty Three

101 60.00 Foundation (NSF) seal for potable water of following dia. Nos.minal bore tube fittings and clamps including making good 653.77 RMT ₹

and Seventy Seven Paisas Only

the wall,ceiling and floor etc. comp. As directed by EIC. (D) 50 mm : service line

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Providing & Fixing HDPE (High Density Polyethene) piping system made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as swun in drawings. total drain pipe line is to be hang from the rcc slab in proper slop with

crome plated hangers of standerd make company recomended system as per detail drawings including instolation of sluce

Rupees Nine Hundred One and

102 490.00 pipe during casting of rcc slab in proper place All pipe must have water hammer pressure test,UVResistance,high chemical 901.93 RMT ₹

Ninety Three Paisas Only

and abrasion resistance quality jointing connecting with caupling joint or electro pusion joints. for butt welding joints

ETC.comp as per detail in structions of manufacturer and engineer in charge. (A) 75 mm

Providing & Fixing HDPE (High Density Polyethene) piping system made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as swun in drawings. total drain pipe line is to be hang from the rcc slab in proper slop with

crome plated hangers of standerd make company recomended system as per detail drawings including instolation of sluce Rupees One Thousand Five

103 495.00 pipe during casting of rcc slab in proper place All pipe must have water hammer pressure test,UVResistance,high chemical 1558.43 Hundred Fifty Eight and Forty Three RMT ₹

and abrasion resistance quality jointing connecting with caupling joint or electro pusion joints. for butt welding joints Paisas Only

ETC.comp as per detail in structions of manufacturer and engineer in charge. (B) 110 mm

Providing & Fixing HDPE (High Density Polyethene) piping system made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as swun in drawings. total drain pipe line is to be hang from the rcc slab in proper slop with

crome plated hangers of standerd make company recomended system as per detail drawings including instolation of sluce Rupees Two Thousand Eight

104 228.00 pipe during casting of rcc slab in proper place All pipe must have water hammer pressure test,UVResistance,high chemical 2847.19 Hundred Forty Seven and Nineteen RMT ₹

and abrasion resistance quality jointing connecting with caupling joint or electro pusion joints. for butt welding joints Paisas Only

ETC.comp as per detail in structions of manufacturer and engineer in charge. (C) 160 mm

Providing & Fixing HDPE (High Density Polyethene) piping system made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as swun in drawings. total drain pipe line is to be hang from the rcc slab in proper slop with

crome plated hangers of standerd make company recomended system as per detail drawings including instolation of sluce

Rupees Four Thousand Eighteen

105 150.00 pipe during casting of rcc slab in proper place All pipe must have water hammer pressure test,UVResistance,high chemical 4018.79 RMT ₹

and Seventy Nine Paisas Only

and abrasion resistance quality jointing connecting with caupling joint or electro pusion joints. for butt welding joints

ETC.comp as per detail in structions of manufacturer and engineer in charge. (D) 200 mm

Providing & Fixing HDPE (High Density Polyethene) piping Tee made up of virgin material to cary PN16 pressure class in PE

63 grade in require diameters as swun in drawings. All pipe Equal Tee must have water hammer pressure

Rupees Nine Hundred Eighty Four

106 50.00 test,UVResistance,high chemical and abrasion resistance quality jointing connecting with caupling joint or electro pusion 984.75 Nos. ₹

and Seventy Five Paisas Only

joints. for butt welding joints ETC.comp as per detail in structions of manufacturer and engineer in charge. (A) 75 mm

Providing & Fixing HDPE (High Density Polyethene) piping Tee made up of virgin material to cary PN16 pressure class in PE

63 grade in require diameters as swun in drawings. All pipe Equal Tee must have water hammer pressure

Rupees One Thousand Five

107 50.00 test,UVResistance,high chemical and abrasion resistance quality jointing connecting with caupling joint or electro pusion 1515.00 Nos. ₹

Hundred Fifteen Only

joints. for butt welding joints ETC.comp as per detail in structions of manufacturer and engineer in charge. (B) 110 mm

Providing & Fixing HDPE (High Density Polyethene) piping Tee made up of virgin material to cary PN16 pressure class in PE

63 grade in require diameters as swun in drawings. All pipe Equal Tee must have water hammer pressure Rupees Three Thousand One

108 5.00 test,UVResistance,high chemical and abrasion resistance quality jointing connecting with caupling joint or electro pusion 3156.25 Hundred Fifty Six and Twenty Five Nos. ₹

joints. for butt welding joints ETC.comp as per detail in structions of manufacturer and engineer in charge. (C) 160 mm Paisas Only

Providing & Fixing HDPE (High Density Polyethene) piping 90° Bend made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as swun in drawings. All pipe 90° Bend must have water hammer pressure

Rupees Six Hundred Fifty One and

109 180.00 test,UVResistance,high chemical and abrasion resistance quality jointing connecting with caupling joint or electro pusion 651.45 Nos. ₹

Forty Five Paisas Only

joints. for butt welding joints ETC.comp as per detail in structions of manufacturer and engineer in charge. (A) 75 mm

Providing & Fixing HDPE (High Density Polyethene) piping 90° Bend made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as swun in drawings. All pipe 90° Bend must have water hammer pressure Rupees One Thousand Four

110 50.00 test,UVResistance,high chemical and abrasion resistance quality jointing connecting with caupling joint or electro pusion 1459.45 Hundred Fifty Nine and Forty Five Nos. ₹

joints. for butt welding joints ETC.comp as per detail in structions of manufacturer and engineer in charge. (B) 110 mm Paisas Only

Providing & Fixing HDPE (High Density Polyethene) piping 90° Bend made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as swun in drawings. All pipe 90° Bend must have water hammer pressure Rupees Three Thousand Five

111 5.00 test,UVResistance,high chemical and abrasion resistance quality jointing connecting with caupling joint or electro pusion 3509.75 Hundred Nine and Seventy Five Nos. ₹

joints. for butt welding joints ETC.comp as per detail in structions of manufacturer and engineer in charge. (C) 160 mm Paisas Only

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Providing & Fixing HDPE (High Density Polyethene) piping Reducer made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as shown in drawings. All pipe Reducer must have water hammer pressure

Rupees Eight Hundred Eighty Eight

112 50.00 test,UVResistance,high chemical and abrasion resistance quality jointing connecting with caupling joint or electro pusion 888.80 Nos. ₹

and Eighty Paisas Only

joints. for butt welding joints ETC.comp as per detail in structions of manufacturer and engineer in charge. (A) 75 X 110mm

Providing & Fixing HDPE (High Density Polyethene) piping Reducer made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as shown in drawings. All pipe Reducer must have water hammer pressure Rupees One Thousand Seven

113 1.00 test,UVResistance,high chemical and abrasion resistance quality jointing connecting with caupling joint or electro pusion 1797.80 Hundred Ninety Seven and Eighty Nos. ₹

joints. for butt welding joints ETC.comp as per detail in structions of manufacturer and engineer in charge. (B) 110 X 160mm Paisas Only

Providing & Fixing HDPE (High Density Polyethene) piping Reducer made up of virgin material to cary PN16 pressure class in

PE 63 grade in require diameters as shown in drawings. All pipe Reducer must have water hammer pressure

Rupees Two Thousand One

114 1.00 test,UVResistance,high chemical and abrasion resistance quality jointing connecting with caupling joint or electro pusion 2100.80 Nos. ₹

Hundred and Eighty Paisas Only

joints. for butt welding joints ETC.comp as per detail in structions of manufacturer and engineer in charge. (C) 160 X 200mm

P/L & jointing to level and slope 160mm dia rigid SWR pipes of IS 13592 for RAIN WATER line including all necessary fittings

such as bends, Tee Joints, bottom shoe, rubber packing ring fixing the same on the wall in true line and level with help of GI

Rupees Eight Hundred Thirty One

115 836.00 Patti clamps at every two meter including jointing with adhesive solvent cement including cost of all types of fixing materials 831.22 RMT ₹

and Twenty One Paisas Only

and all other necessary fixtures including fixing air and water tight testing the line etc. complete as directed by engineer in

charge. 160mm dia

Providing & laying and jointing in true line and level 110 diameter U.P.V.C (TYPE B) conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring & fittings conforming to IS 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the

Rupees Eight Hundred Thirty Five

116 375.00 size 110 diameter X 149mm length X 145mm height at every 2000mm center to center or shall be concealed in wall as 835.15 RMT ₹

and Fourteen Paisas Only

directed including necessary fittings such as bends, shoes etc. including testing of pipe and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing & laying and jointing in true line and level 160 diameter U.P.V.C (TYPE B) conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring & fittings conforming to IS 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the

Rupees Eight Hundred Thirty One

117 570.00 size 160 diameter X 210mm length X 196mm height at every 2000mm center to center or shall be concealed in wall as 831.22 RMT ₹

and Twenty One Paisas Only

directed including necessary fittings such as bends, shoes etc. including testing of pipe and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing and laying 150mm Ø Stoneware glazed pipe of standard make and quality in proper line level and required slop

including jointing with water proof mixture of Cement Mortar in proportion 1:1, including testing of pipes and joints Rupees Two Hundred Ninety One

complete. Including making trenches and refilling trenches etc. comp.as per the instructions of EIC. and Eleven Paisas Only

Providing and fixing to wall, ceiling and floor galvanised B Class Mild steel tubes standard make of the following Nos.minal

bore,including tube, Tee, Elbows,union,nipple etc. fitting and clamps including making good the wall and floor including Rupees Three Hundred Ninety

pressure testing of leakage etc. comp.as per the instructions of EIC. Seven and Eighty Six Paisas Only

Providing and fixing PVC SWR Nahni trap IS 14735 for drain 100mm diameter with jali of the self cleaning design with C.I.

Rupees Five Hundred Seventy One

120 140.00 scread down or hinged grating including the cost of cutting and making good the wall.etc. comp.as per the instructions of 571.08 Nos. ₹

and Eight Paisas Only

Providing and fixing PVC SWR Floor Drain of the following Nos.minal diameter of self cleaning design with CP brass 15x15cm

Rupees Six Hundred Eighty One

121 140.00 square Jali on top surface with water proof finish of side and surface including cost of cutting and making good the walls 681.75 Nos. ₹

and Seventy Five Paisas Only

and floor 100mm inlet and 50mm outlet.etc. comp.as per the instructions of EIC.

Providing and erecting and fixing double coated Syntex or equivalent PVC. (ISI) water tank of required capacity each with all Rupees Three and Ninety Four

122 52500.00 necessary fittings and connection etc. complete on terrace. 3.95 Liter ₹

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm Rupees One Thousand Two

123 10.00 x 300mm size (inside) with standard weight. (i) Square mouth traps. a) 150 mm X 100 mm. Size-p-or R type. 1246.92 Hundred Forty Six and Ninety One Nos. ₹

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm

Nos.minal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm Nos.minal size) finished smooth

complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size Rupees Eleven Thousand Twenty

560mm diameter total weight of cover and frame to be Nos.t less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Nine and Ninety Six Paisas Only

Kg.) (A) With 230mm thick walls of brick msonry using brick having crushing strength Nos.t less than 35Kg. / Sq.cm. in

Cement Mortar 1:5 (1- Cement: 5-Coarse sand)

(1) A type depth 0.90 Metre 150mm dia sewer

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm

Nos.minal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm Nos.minal size) finished smooth Rupees Nineteen Thousand Three

125 6.00 complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 19330.46 Hundred Thirty and Forty Six Paisas Each ₹

560mm diameter total weight of cover and frame to be Nos.t less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Only

Kg.) (A) With 230mm thick walls of brick msonry using brick having crushing strength Nos.t less than 35Kg. / Sq.cm. in

Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre 150mm dia sewer

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm

Nos.minal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm Nos.minal size) finished smooth Rupees Twenty Three Thousand

126 6.00 complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 23441.74 Four Hundred Forty One and Each ₹

560mm diameter total weight of cover and frame to be Nos.t less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Seventy Three Paisas Only

Kg.) (A) With 230mm thick walls of brick msonry using brick having crushing strength Nos.t less than 35Kg. / Sq.cm. in

Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type depth 2.25 Metre 150mm dia sewer

Constructing brick masonry chamber for underground C.I. Inspection chamber & bends with bricks having crushing strength

Nos.t less than 35 Kg/Cm2 in C.M. 1:5 Including . cover with frame (Heavy duty) 455 mm x 610 mm internal dimensions of

Rupees Two Thousand Nine

SFRC Cover with Frame of Heavy duty and Foundation concrete 1:5:10 inside plaster 15 mm th.with cement mortar 1:3

127 20.00 2932.93 Hundred Thirty Two and Ninety Two Nos. ₹

finished smooth with a floating coat of neat cement on walls and bed concrete etc. comp upto 1.5mt depth inside

dimension 455 mm x 610 mm x 450 deep for pipe line with one or two

Constructing brick masonry chamber for underground C.I. Inspection chamber & bends with bricks having crushing strength

Nos.t less than 35 Kg/Cm2 in C.M. 1:5 precast SFRC cover with frame (Heavy duty) 500 mm x700 mm internal dimensions as

Rupees Three Thousand Six

approved by Engineer in-charge with (R.C.C. top slab with 1:2:4 mix (Icement : 2 coarse sand : 4 graded stone aggregate

128 13.00 3660.76 Hundred Sixty and Seventy Five Nos. ₹

mm size) foundation concrete 1:5:10 inside plaster 15 mm th.with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc. comp upto 1.5mt depth inside dimension 500mm x 700mm x 450 deep for

pipe line with one or two inlet.

Constructing brick masonry chamber for underground C.I. Inspection chamber & bends with bricks having crushing strength

Nos.t less than 35 Kg/Cm2 in C.M. 1:5 precast SFRC cover with frame (Heavy duty) 600 mm x 850 mm internal dimensions as

approved by Engineer in-charge with (R.C.C. top slab with 1:2:4 mix (Icement : 2 coarse sand : 4 graded stone aggregate 20 Rupees Seven Thousand One

129 12.00 mm size) foundation concrete 1:5:10 inside plaster 15 mm th.with cement mortar 1:3 finished smooth with a floating coat 7180.44 Hundred Eighty and Forty Four Nos. ₹

of neat cement on walls and bed concrete etc. comp upto 1.5mt depth ...inside dimension 600mm x 850mm x 450 deep for Paisas Only

pipe line with one or two inlet.

Detailed design and engineering of providing ,construction,testiing and commissioning DEWATS (Decentralized waste water

treatment system) plant for sewage treatment based on anaerobic treatment systems constructing of setting chambers

(Primary/secondary) anaerobic baffle reactor, anaerobic filter, treated water storage tank necessary pipeing works for inlet,

outlet, scouring and bypass arrangment with required valves, gates, drain, screen inlet chambers etc. complete including

cost of all associated civil, mechanical, electrical works, process and instumentation diagram, hydraulic diagram, site layout Rupees Twenty Four Lacs Three

plan and site grading plan, single line diagram, control philosophy, quality assurance plan, civil and mechanical general Thousand Eight Hundred Only

arrangment drawings, structuraldesigns and drawings, construction drawings, mechanical equipments data sheet and

drawing, as built drawings, operations and maintenance manuals etc. (A) 0.1 MLD capacity DEWATS ,Add (Prorate) for

capacity above 0.1MLD up to 0.25MLD. 1) Setting chambers(Primary/secondary) 2) Anaerobic Baffle Reactor 3) Anaerobic

Filter 4) Treated water storage tank

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Rupees Three Thousand Three

Providing and Fixing 2Nos. Grab bar wall mounted size 350mm long & 1Nos. U-Shaped Raill with hinges size 600mm X

131 10.00 3383.50 Hundred Eighty Three and Fifty Nos. ₹

100mm at fixed height ( Primum Quality) for handicap toilet complete as per Architect Drawing and E.I.C

Providing and Fixing Percolation well (450mm dia tube well up to 40 meter depth) with including parts johnson V wire

screen,MS pipe, Gravel,vent pipe, etc. Infiltration Testing & including Boring and sinking 175mm diameter Percolation pile

Rupees One Lacs Thirty Thousand

with 160mm OD uPVC Casting pipes & Screens (C.S.) IS 12818:1992 as per specifications with hand auguring system and

132 3.00 130643.50 Six Hundred Forty Three and Fifty Nos. ₹

clearing the site on completion of depth from max 24meter. with Gravel,vent pipe 50mm dia 6 meter length, 160mm dia

Strainer pipe 3mm opening. 300mmheight 300mm dia upvc strainer in sump,etc. complete job as specified and as per

detaild drawings as directed.

Providing,Installation & Testing of 1000LPH Water Chiller plant with 1Nos. of RAW WATER FEEDING PUMP 1 H/P WITH

RPM WITH CLASS F INSULATIONS, 2Nos. of 13X54 VESSAL FOR MULTI GRADE FILTER AND ACTIVATEDCROBN FILTER

F.R.P.MOC WITH 10 K/G MEXMIMUM PRESSURE ABSORBING CAPACITY COMPITIBLE FOR 104.47 LITER VOLUME AND

Rupees One Lacs Seven Thousand

133 3.00 WITHHARDCORE MATERIAL AVENTURA / PAINTAIR & 1Lot of SEND+ MEDIA+ CARBON OF 900 IV 4/8 MESH SIZE 107565.00 Nos. ₹

Five Hundred Sixty Five Only

COCONUTSHELLBASE FOR ABSORBING COLOUR/ODORE/DUST/RUST/ ANDSUSPENDED 110 K/G etc. As Directed by Engineer

Providing,Installation & Testing of 1000LPH RO plant PARTICALS OF RAW WATERR SEND+MEDIA+25 K/G CARBON,2Nos. of

25 NB TOP MOUNT MULTI PORT AUTO VALVE FRONT FACEWITHAUTO BACK WASH AND RINSE FACILITY TO DRAIN

ALLCOLLECTIVEDUST AND OTHER MATERIAL FROM VESSEL INITITIVE, 3 Nos. of PRESSURE GAUGE O TO 7 K/G OR 0 TO

K/G ¼ BSP THRADBOTTOM FOR UNDERSTANDOF RAW WATER FLOW FROM R/W PUMP TO ACFFINAL OUT LATE AIR

MASTER,1 Nos. of 20 “ LONG 4 IDA 5 MICRON SPUN FILTER FOR COLLECTING DUST /RUST/ AND SOLIDES OF RAW WATER

ABOVE 5 MICRONS P.P.HOUSSING STD WITH BAG, 1Nos. of ANTISCELLANT DOSING CHEMICAL PUMP DIAPHARM TYPEO TO

6 LPH AT 4 K/G PRESSURE WITH SELF AIR RELISE SYSTEMDIGITAL DISPLAYWITH STROK SETTING OF 30 TO 300 ( O TO 6 LPH)

I-DOSE/PRO AQUA, 1Nos. of LOW PRESSURE PROTECTION SWITCH O TO 5 K/G MAXIMUMSETTING TO PRIVENT DRY RUN

OF HIGH PRESSURE PUMP DENFOSE,1 Nos. of HIGH PRESSURE VERTICAL MULTISTAGE PUMP 2-18 SERIESFORBOOSTING

RAW WATER PUMP AND MAKE SUFISIANT PRESSURE OF RAWWATER TO DELIVERY MEMBRENS INPUT, 1Nos. of DIGITAL Rupees One Lacs Ninety Nine

134 3.00 CONTROL PANEL WITH FULLY AUTO FUNCATION / ALLINDICATION ON PANEL FRONT WITH ALL PROTECTION WITH ON-LINE 199172.00 Thousand One Hundred Seventy Nos. ₹

T.D.SMETER / ON- LINE HOUR METER/ON-LINE AMPEAR METER/ WITHLOGIC AND POWER SUPPLY CARD WITH FUSE AND Two Only

MOVPROTECATION ELCARE AUTO COMPTIBLE, 2 Nos. of PRESSURE TUBE FOR MEMBRENS 40X40-2 ELEMENT 300 PSIWITH

F.R.P MATERIAL WITH CLAMPING SYSTEM EcoSmart,4 Nos. of BW SERIES MEMBRENS OF TFC MAID WITH SALT

REJECTIONRATION OF 99.7% FLOW RATE PER MEMBRENS WILL BE 250 LITER/H, T.D.SREJECTION FROM RAW WATER IS

TO 95% MAXIMUM INSTANDARAD TEST PERAMETERS. LIMITS OF TDS WILL BE 2000TO 2500 PPM FILMTECH DOW BW

40*40,1 Nos. of FREAM STRUCTURE S.S. BOSFREAM, 2Nos. of FLOW SWITCH FOR PLANT AUTO STOP FLOTY TYPE, with 1lot

PIPE LINE SHEDULE 40 WITH 10 TO 20 K/G PRESSUREABSORBING CAPACITY AT 35 TO 45 DIGREE TEMPRETURE INTERNAL

OFF PLANT etc. As Directed by Engineer in charge

Fully Automatic Pressurized water distribution thru Hydro-pneumatic Water distribution system HMI (color touch screen

display) PLC & VFD based Control Panel with "LUBI" make Pressure booster system (SUBpack) Type: 3 x SLSJ 24-05, Pump

Rupees Seven Lacs One Thousand

135 2.00 MOC: Complete SS304, Nos. of Pump: 3 Nos. (2w+1s), Total System Flow: 77.4 m3/hr (with stand by pump), Each pump 701950.00 Nos. ₹

Nine Hundred Fifty Only

Flow: 25.8 m3/hr @ Head: 40 meter, Each Motor: 4 Kw (5.5 HP), 2900 RPM, 3-Phase, 50Hz, Pressure Tank Capacity: 200 liter

As Directed by Engineer in charge

Constructing underground Water tank Providing 180 mm thick R.C.C. top and bottom slab and RCC Vertical fins inner side

of water tank with M250 mix, also providing 40 mm thick IPS in bed over 150 mm thick PCC (1:3:6) with inside plaster of

Rupees Nineteen and Nineteen

136 200000.00 mm thick in cm 1:3 finish smooth with floating coat neat cement slurry on wall and 20mm sandfaced cement plaster on 19.19 Liter ₹

outer side wall with Febricated Cover with Locking arrangement with frame (heavy duty) 610mm x 610mm internal

dimention as aprroved by engineer incharge etc. complete.

Providing and fixing high fencing with Y shape long M.S. Angle posts 40mm x 40 mm x6 mm (0.60 H X 0.60 W ) and oil

painting 3 coats fixed at 2.5 Mt,C/c. with 3layer of barbed wire and on Y shape Concertina Coil Diameter 900 mm, Razor Rupees Six Hundred Ten and Eighty

Type Single Razor GSM 40 GSM, Length 100 m, Material Iron, Surface Treatment, Galvanized Etc Complete One Paisas Only

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-1

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs, SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging

on shutter for 50,000 cycles Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall

Dimensions L=6200mm x W=827mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer

cycle Test 70 Kgs weight loaded in drawer for 50,000 cycles Under Bench Storage Modules :- BA5C36(Qty-5) : L 914 x W

x H 894, 2 shutter ,1 drawer & 1 adjustable-,BA5C30(Qty-1) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable-:- Rupees Three Lacs Eighty Nine

138 1.00 BA8C30(Qty-1) : L 762 x W 559 x H 894, 2 shutter , Metal Raceway 10D 5H without Electrical Fittings (Running Meters), 389581.97 Thousand Five Hundred Eighty One Nos. ₹

Rubber Moulding(Running Meters) Sink-SKPPB- Black PP Sink Bowl Size 480 x 380 x 300 D, USWB3S- Water Tap in brass-3 and Ninety Six Paisas Only

way bench mounted Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-9) with

1 socket 16 Amp switch without wiring-SC5A112-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-

Square Feet [ 300 x 300 mm Area ] for Size of 827 mm Wide (square feet)

Wall Bench [WB]-35

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6294+1118+1

corner (1067X1067) mm x W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer

cycle Test 70 Kgs weight loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C30(Qty-2) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , Rupees Three Lacs Forty Four

139 1.00 BA5C36(Qty-4) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf, BA5B24Qty-1) : L 610 x W 559 x H 894, 1 344420.52 Thousand Four Hundred Twenty Nos. ₹

shutter ,1 drawer & 1 adjustable Shelf, Corner BA1B18 (Qty-1) L 457 x W 559 x H 894 1 shutter ,with required Rear Support and Fifty Two Paisas Only

& filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) ,Rubber Moulding(Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-14) with 1 socket

Amp switch, without wiring SC5A112 (Qty-1)-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-Square

Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-3

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=5073+3724+1

corner -1067x 1067mm x W=914mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer

cycle Test 70 Kgs weight loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C36(Qty-1) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable shelf-:- Rupees Three Lacs Forty Four

140 1.00 BA5C30(Qty-8) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable shelves;BA1B18 (QTY-1) L457 X W 559 X H 344500.22 Thousand Five Hundred and Nos. ₹

894;BA8C30(Qty-1) : L 914 x W 559 x H 894, Sink Cabinet 2 shutter , Metal Raceway 10D 5H without Electic Fittings (Running Twenty One Paisas Only

Meters), Rubber Moulding(Running Meters). Water Tap :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with

swivel spout 1/2" BSP male inlet ( bench mounting ). Black colour PP Sink bowl size 480x380x300mm D. Electrical Fittings :-

Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-10) with 1 socket 16 Amp switch without wiring-

SC5A112(Qty-2)-Service column 127D 152W 2844H. Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ]

for Size of 914 mm Wide (square feet)

Wall Bench [WB]-4

MOC :- CRCA 1.2/2 mm Thickness,

SEFA 8M Compliant:-

Design & Construction:- Floor Mounted and welded Overall Dimensions L=5769 mm x W=762mm x H=914mm,

Rupees One Lacs Sixty Nine

Anit vibration table;AAVA30(QTY -7) -L 762 X W 762 X H 914 , Metal Raceway 10D 5H without Electic Fittings (Running

141 5.00 169024.73 Thousand Twenty Four and Seventy Nos. ₹

Meters),:Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 6 Modules plate(Qty-7) with 2 socket

Three Paisas Only

Amp switch without wiring-SC5A112(Qty-2) -Service column 127D 152W

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-5

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6240mm x

W=914mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C36(Qty-5) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable-:- BA8C30(Qty- Rupees Two Lacs Sixty Two

142 1.00 1) : L 914 x W 559 x H 894, Sink Cabinet 2 shutter , Metal Raceway 10D 5H without Electic Fittings (Running Meters), Rubber 262769.68 Thousand Seven Hundred Sixty Nine Nos. ₹

Moulding(Running Meters) and Sixty Eight Paisas Only

Water Tap :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-9) with 1 socket 16 Amp

switch without wiring-SC5A112-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 914 mm Wide (square feet)

Wall Bench [WB]-6

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=1702mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C36(Qty-1) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable shelf-:- Rupees Eighty Two Thousand

143 5.00 BA8C30(Qty-1) : L 762 x W 559 x H 894, Sink Cabinet 2 shutter , Metal Raceway 10D 5H without Electic Fittings (Running 82016.22 Nos. ₹

Sixteen and Twenty Two Paisas Only

Meters), Rubber Moulding(Running Meters)

Water Tap :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench

muonting ) with Black colour PP Sink bowl size 480x380x300mm D

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-1) with 1 socket 16 Amp

switch without wiring-SC5A112-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-7

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=4587mm x

W=762mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Rupees One Lacs Forty Two

144 1.00 Under Bench Storage Modules :- BB2C30(Qty-3) : L 762 x W 559 x H 737, 2 shutter ,1 drawer & 1 adjustable Shelf 142169.04 Thousand One Hundred Sixty Nine Nos. ₹

;BB2B21(Qty-1) L 533 x W 559 x H 737, 1 shutter ,1 drawer & 1 adjustable Shelves; BARN30-L 760 x W 559 X H 737 Leg and Four Paisas Only

space; Metal Raceway 10D 5H without Electic Fittings (Running Meters), Rubber Moulding(Running Meters)

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-5) with 1 socket 16 Amp

switch without wiring-SC5A118(Qty-2) -Service column 127D 254W 2997H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide ((square feet)

Wall Bench [WB]-8

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=4160mm x

W=762mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Rupees One Lacs Thirty Six

145 1.00 Under Bench Storage Modules :- BB2C30(Qty-4) : L 762 x W 559 x H 737, 2 shutter ,1 drawer & 1 adjustable 136956.27 Thousand Nine Hundred Fifty Six Nos. ₹

Shelves;BB2C36(Qty-1) : L 914 x W 559 x H 737, 2 shutter ,1 drawer & 1 adjustable Shelves; Metal Raceway 10D 5H without and Twenty Seven Paisas Only

Electic Fittings (Running Meters), Rubber Moulding(Running Meters)

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-5) with 1 socket 16 Amp

switch without wiring-SC5A118(Qty-1) -Service column 127D 254W 2997H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-9

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6428mm x

W=914 mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BB2C30(Qty-1) : L 762 x W 559 x H 737, 2 shutter ,1 drawer & 1 adjustable Shelf-:- Rupees One Lacs Eighty Nine

146 1.00 BB2B24(Qty-4) : L 610 x W 559 x H 737, 1 shutter 1 drawer, with required Rear Support & filler Panels, BKBD30 (Qty-4) leg 189816.81 Thousand Eight Hundred Sixteen Nos. ₹

space for the KBD / CPU Trolley Metal Raceway 5D 5H without Electic Fittings (Running Meters) ,Rubber Moulding(Running and Eighty One Paisas Only

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-10) with 1 socket

Amp switch, Electrical Single Phase 230 V,6/16 Amp branded make- 6 Modules plate(Qty-4) with 2 socket 16 Amp switch,

LAN Point(Qty-4) without wiring SC5A118 (Qty-1)-Service column 127D 152W 2997H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 914 mm Wide (square

Wall Bench [WB]-10

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6240mm x

W=914 mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BB2C30(Qty-1) : L 762 x W 559 x H 737, 2 shutter ,1 drawer & 1 adjustable Shelf :- Rupees One Lacs Seventy Eight

147 1.00 BB2B24(Qty-3) : L 610 x W 559 x H 737, 1 shutter 1 drawer, with required Rear Support & filler Panels, BKBD30 (Qty-4) leg 178493.84 Thousand Four Hundred Ninety Nos. ₹

space for the KBD / CPU Trolley Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) ,Rubber Three and Eighty Three Paisas Only

Moulding(Running Meters).

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-9) with 1 socket 16 Amp

switch, Electricalal Single Phase 230 V,6/16 Amp branded make- 6 Modules plate(Qty-4) with 2 socket 16 Amp switch&

module plate-(Qty-9) 1 socket & switch, LAN Point(Qty-4) without wiring SC5A118 (Qty-1)-Service column 127D 152W

2997H. Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 914 mm Wide (square feet)

Wall Bench [WB]-11

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3619mm x

W=762 mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BB2C30(Qty-2) : L 762 x W 559 x H 737, 2 shutter ,1 drawer & 1 adjustable Shelf, Rupees One Lacs Fourteen

148 1.00 BB2C36(Qty-2) : L 914 x W 559 x H 737, 2 shutter ,1 drawer & 1 adjustable:- with required Rear Support & filler Panels, 114996.60 Thousand Nine Hundred Ninety Six Nos. ₹

Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) ,Rubber Moulding(Running Meters) and Sixty Paisas Only

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-4) with 1 socket 16 Amp

switch, without wiring SC5A118(Qty-1)-Service column 127D 152W 2997H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-12

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=4685mm x

W=762 mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Rupees One Lacs Fifty Nine

149 1.00 Under Bench Storage Modules :- BB2C30 (Qty-6) : L 762 x W 559 x H 737, 2 shutter ,1 drawer & 1 adjustable Shelf, with 159242.00 Thousand Two Hundred Forty One Nos. ₹

required Rear Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) ,Rubber and Ninety Nine Paisas Only

Moulding(Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-6) with 1 socket 16 Amp

switch, without wiring SC5A118(Qty-1)-Service column 127D 152W 2997H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762mm Wide (square feet)

Wall Bench [WB]-13

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6190mm x

W=914 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30(Qty-1) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf:- Rupees Two Lacs Sixty Two

150 5.00 BA5C36(Qty-5) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , Sink Cabinet BA8C30(Qty-1) : L 762 x W 262356.68 Thousand Three Hundred Fifty Six Nos. ₹

559 x H 894, 2 shutter ,with required Rear Support & filler Panels, Metal Raceway 5D 5H without Electical Fittings (Running and Sixty Eight Paisas Only

Meters) ,Rubber Moulding(Running Meters) Water Tap(Qty-1) :-

Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench muonting )with PP

Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board & Eye wash

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-9) with 1 socket 16 Amp

switch, without wiring SC5A112 (Qty-1)-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 914 mm Wide (square feet)

Wall Bench [WB]-14

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6300mm x

W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30(Qty-1) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf:- Rupees Three Lacs Ninety

151 1.00 BA5C36(Qty-5) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf, Sink Cabinet BA8C30(Qty-1) : L 762 x W 390844.79 Thousand Eight Hundred Forty Four Nos. ₹

559 x H 894, 2 shutter ,with required Rear Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings and Seventy Nine Paisas Only

(Running Meters) ,Rubber Moulding(Running Meters). Water Tap(Qty-1) :- Water Tap in brass - 3 way with 2 fixed bib

taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS

Peg Board & Eye wash Spot Extractor (Qty-1) with Blower & Ducting. Electricalal Fittings :- Electricalal Single Phase

V,6/16 Amp branded make- 3 Modules plate(Qty-9) with 1 socket 16 Amp switch, without wiring SC5A112 (Qty-1)-Service

column 127D 152W 2844H Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 914 mm Wide

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-15

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=8050mm x

W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30(Qty-4) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf:- Rupees Three Lacs Seventy Two

152 1.00 BA5C36(Qty-4) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf, Sink Cabinet BA8C30(Qty-1) : L 762 x W 372902.35 Thousand Nine Hundred Two and Nos. ₹

559 x H 894, 2 shutter ,with required Rear Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings Thirty Five Paisas Only

(Running Meters) ,Rubber Moulding(Running Meters) Water Tap(Qty-1) :- Water Tap in brass - 3 way with 2 fixed bib taps &

1 tap with swivel spout 1/2" BSP male inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-9) with 1 socket 16 Amp

switch, without wiring SC5A112 (Qty-1)-Service column 127D 152W 2844H PheNos.lic Resin -Trespa Top 16mm Thickness-

Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-16

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=14777mm x

W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30(Qty-7) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf:- Rupees Four Lacs Eighty Thousand

153 1.00 BA5C36(Qty-4) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf, BA2B24(Qty-4) : L 610 x W 559 x H 894, 1 480377.92 Three Hundred Seventy Seven and Nos. ₹

shutter 1 drawer, Corner BA1B18 (Qty-1) L 457 x W 559 x H 894 1 shutter , Sink Cabinet BA8C30(Qty-1) : L 762 x W 559 x H Ninety One Paisas Only

894, 2 shutter ,with required Rear Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running

Meters) ,Rubber Moulding(Running Meters) Water Tap(Qty-1) :-

Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench mounting )with PP

Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-17) with 1 socket

Amp switch, without wiring SC5A112 (Qty-2)-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-Square

300 mm Area ] for Size of 914 mm Wide (square feet)

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3100mm x

W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30(Qty-4) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf ,with Rupees One Lacs Fifteen Thousand

154 1.00 required Rear Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) ,Rubber 115020.41 Nos. ₹

Twenty and Forty One Paisas Only

Moulding(Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-6) with 1 socket 16 Amp

switch, without wiring SC5A112 (Qty-1)-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 914 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-18

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6428mm x

W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C36(Qty-6) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf, Sink Rupees Three Lacs Eighty Thousand

155 1.00 Cabinet BA8C30(Qty-1) : L 762 x W 559 x H 894, 2 shutter ,with required Rear Support & filler Panels, Metal Raceway 5D 5H 380112.87 One Hundred Twelve and Eighty Six Nos. ₹

without Electricalal Fittings (Running Meters) ,Rubber Moulding(Running Meters) Paisas Only

Water Tap(Qty-1) :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male

inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board

Spot Extractor (Qty-1) with Blower & Ducting

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-9) with 1 socket 16 Amp

switch, without wiring SC5A112 (Qty-1)-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-19

MOC :- CRCA 1.2/2 mm Thickness,

SEFA 8M Compliant:-

Design & Construction:- Floor Mounted and welded Overall Dimensions L=4572 mm x W=762mm x H=914mm,

Rupees One Lacs Forty Six

Anit vibration table; AAVA30 (QTY -6) -L 762 X W 762 X H 914 , Metal Raceway 5D 5H without Electic Fittings (Running

156 1.00 146146.94 Thousand One Hundred Forty Six Nos. ₹

Meters),:Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 6 Modules plate(Qty-6) with 2 socket

and Ninety Three Paisas Only

Amp switch without wiring-SC5A112(Qty-1) -Service column 127D 152W

Wall Bench [WB]-20

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs, SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging

on shutter for 50,000 cycles Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall

Dimensions L=14646mm x W=914 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer

cycle Test 70 Kgs weight loaded in drawer for 50,000 cycles Under Bench Storage Modules :-BA5C30(Qty-8) : L 762 x W

x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , BA5C36(Qty-2) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable

Shelf, BA5B24(Qty-2) : L 610 x W 559 x H 894, 1 shutter 1 drawer, BA5A21(Qty-1) : L 533 x W 559 x H 894, 1 shutter 1 Rupees Six Lacs Thirty Three

157 1.00 drawer, Corner BA1B18 (Qty-1) L 457 x W 559 x H 894 1 shutter , Sink Cabinet BA8C30(Qty-3) : L 762 x W 559 x H 894, 2 633052.20 Thousand Fifty Two and Twenty Nos. ₹

shutter ,with required Rear Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) Paisas Only

,Rubber Moulding(Running Meters) Water Tap(Qty-3) :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with

swivel spout 1/2" BSP male inlet ( bench mounting )with PP Sink bowl(Qty-3) size 480x380x300mm D, SS Peg Board Spot

Extractor (Qty-1) with Blower & Ducting Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make-

Modules plate(Qty-18) with 1 socket 16 Amp switch, without wiring SC5A112 (Qty-2)-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 914mm Wide (square feet)

Wall Bench [WB]-21

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=18226mm x

W=914 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Under Bench Storage Modules :-BA5C30(Qty-9) : L 762 x W 559 x H 894, 2 shutter

drawer & 1 adjustable Shelf , BA5C36(Qty-2) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf, BA5B24(Qty- Rupees Six Lacs Ninety Nine

158 1.00 4) : L 610 x W 559 x H 894, 1 shutter 1 drawer, BA5A21(Qty-1) : L 533 x W 559 x H 894, 1 shutter 1 drawer, Corner BA1B18 699044.02 Thousand Forty Four and One Nos. ₹

(Qty-1) L 457 x W 559 x H 894 1 shutter , Sink Cabinet BA8C30(Qty-3) : L 762 x W 559 x H 894, 2 shutter ,with required Rear Paisas Only

Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) ,Rubber Moulding(Running

Meters) Water Tap(Qty-3) :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet

( bench mounting )with PP Sink bowl(Qty-3) size 480x380x300mm D, SS Peg Board Electricalal Fittings :- Electricalal Single

Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-23) with 1 socket 16 Amp switch, without wiring SC5A112 (Qty-

3)-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of

914mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-22

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=14875mm x

W=754 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C30(Qty-13) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , Rupees Four Lacs Fifty Five

159 1.00 BA5C36(Qty-2) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf, Corner BA1B18 (Qty-1) L 457 x W 559 x H 455511.69 Thousand Five Hundred Eleven and Nos. ₹

894 1 shutter ,with required Rear Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Sixty Nine Paisas Only

Meters) ,Rubber Moulding(Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-17) with 1 socket

Amp switch, without wiring SC5A112 (Qty-2)-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-23

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=8345+5304+1

corner (1067X1067) mm x W=754 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer

cycle Test 70 Kgs weight loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C30(Qty-16) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , Rupees Four Lacs Ninety Nine

160 1.00 BA5B24Qty-2) : L 610 x W 559 x H 894, 1 shutter ,1 drawer & 1 adjustable Shelf, Corner BA1B18 (Qty-1) L 457 x W 559 x H 499350.28 Thousand Three Hundred Fifty and Nos. ₹

894 1 shutter ,with required Rear Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Twenty Seven Paisas Only

Meters) ,Rubber Moulding(Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-20) with 1 socket

Amp switch, without wiring SC5A112 (Qty-1)-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-24

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=4037mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C30(Qty-2) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable, BA5C36(Qty-1) : Rupees One Lacs Eighteen

161 1.00 L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable , AKBD30(Qty-2) :leg space for the KBD / CPU Trolly,Metal 118360.69 Thousand Three Hundred Sixty and Nos. ₹

Raceway 10D 5H without Electic Fittings (Running Meters), Rubber Moulding(Running Meters), Sixty Eight Paisas Only

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-5) with 1 socket 16 Amp

switch & 6 module plate (Qty-2)without wiring-SC5A112(Qty-1) -Service column 127D 254W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-25

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6180mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Rupees Two Lacs Sixty Three

162 1.00 Under Bench Storage Modules :-BA5C30(Qty-1) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable, BA5C36(Qty-4) : 263011.90 Thousand Eleven and Eighty Nine Nos. ₹

L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable ,BA8C30 (Qty-1) L 762 x W 559 x H 894 sink cabinet ,Water Tap in Paisas Only

brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench mounting )with PP Sink bowl(Qty-

1) size 480x380x300mm D, SS Peg Board ,Metal Raceway 10D 5H without Electic Fittings (Running Meters), Rubber

Moulding(Running Meters), Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-

10) with 1 socket 16 Amp switch without wiring-SC5A112(Qty-1) -Service column 127D 254W 2844H Black Granite Top

18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-26

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=4300 mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C30(Qty-2) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable shelf, Rupees One Lacs Forty Nine

163 3.00 BA5C36(Qty-3) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable ,Metal Raceway 10D 5H without Electic Fittings 149971.63 Thousand Nine Hundred Seventy Nos. ₹

(Running Meters), Rubber Moulding(Running Meters), One and Sixty Three Paisas Only

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-8) with 1 socket 16 Amp

switch without wiring-SC5A112(Qty-1) -Service column 127D 254W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-27

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=4300 mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Rupees One Lacs Thirty Four

164 1.00 Under Bench Storage Modules :-BA5C30(Qty-2) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable, BA5C36(Qty-2) : 134455.47 Thousand Four Hundred Fifty Five Nos. ₹

L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf,AARN30 (QTY-1) leg space L 762 x W 559 x H 894 Metal and Forty Six Paisas Only

Raceway 10D 5H without Electic Fittings (Running Meters), Rubber Moulding(Running Meters),

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-8) with 1 socket 16 Amp

switch without wiring-SC5A112(Qty-1) -Service column 127D 254W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-28

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3700 mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C36(Qty-) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable , BA5B24(Qty-1) : Rupees One Lacs Thirty Two

165 1.00 L 610 x W 559 x H 894, 1 shutter RHS,1 drawer & 1 adjustable shelf,BA5A24(Qty-1) : L 610 x W 559 x H 894, 1 shutter LHS,1 132584.01 Thousand Five Hundred Eighty Four Nos. ₹

drawer & 1 adjustable shelf,BA8C30 (Qty-1) L 762 x W 559 x H 894 sink cabinet ,Water Tap in brass - 3 way with 2 fixed bib Only

taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS

Peg Board , Metal Raceway 10D 5H without Electic Fittings (Running Meters), Rubber Moulding(Running Meters),

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-4) with 1 socket 16 Amp

switch without wiring-SC5A112(Qty-1) -Service column 127D 254W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-29

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=2700mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Rupees Two Lacs Sixty One

166 1.00 Under Bench Storage Modules :BA5C36(Qty-2) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable shelf , BA8C30 261192.19 Thousand One Hundred Ninety Two Nos. ₹

(Qty-1) L 762 x W 559 x H 894 sink cabinet ,Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" and Eighteen Paisas Only

BSP male inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board ,Metal Raceway 10D 5H

without Electic Fittings (Running Meters), Rubber Moulding(Running Meters), Spot Extractor (Qty-1) with blower & Ducting

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-3) with 1 socket 16 Amp

switch without wiring-SC5A112(Qty-1) -Service column 127D 254W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-30

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3900mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Rupees Three Lacs Twenty Two

167 1.00 Under Bench Storage Modules :-BA5C30(Qty-4) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable, BA8C30 (Qty-1) 322857.30 Thousand Eight Hundred Fifty Nos. ₹

L 762 x W 559 x H 894 sink cabinet ,Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP Seven and Twenty Nine Paisas Only

male inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board & Eyewash ,Metal Raceway

10D 5H without Electic Fittings (Running Meters), Rubber Moulding(Running Meters),

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-6) with 1 socket 16 Amp

switch without wiring-SC5A112(Qty-1) -Service column 127D 254W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-31

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3143mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Rupees One Lacs Thirteen

168 1.00 Under Bench Storage Modules :-BA5C36(Qty-4) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable , BA8C30 (Qty-1) 113825.91 Thousand Eight Hundred Twenty Nos. ₹

L 762 x W 559 x H 894 sink cabinet ,Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP Five and Ninety Paisas Only

male inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board ,Metal Raceway 10D 5H

without Electic Fittings (Running Meters), Rubber Moulding(Running Meters),

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-2) with 1 socket 16 Amp

switch without wiring-SC5A112(Qty-1) -Service column 127D 254W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-32

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=1727mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight Rupees One Lacs Thirty Five

169 1.00 loaded in drawer for 50,000 cycles 135463.21 Thousand Four Hundred Sixty Three Nos. ₹

Under Bench Storage Modules :- BA5C36(Qty-1) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable , BA8C30 (Qty- and Twenty Paisas Only

1) L 762 x W 559 x H 894 sink cabinet ,Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP

male inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-33

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3150mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight Rupees One Lacs Nine Thousand

loaded in drawer for 50,000 cycles

170 1.00 109212.47 Two Hundred Twelve and Forty Six Nos. ₹

Under Bench Storage Modules :-BA5C30(Qty-4) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable,Metal Raceway

10D 5H without Electic Fittings (Running Meters), Rubber Moulding(Running Meters),

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-6) with 1 socket 16 Amp

switch without wiring-SC5A112(Qty-1) -Service column 127D 254W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-34

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3378mm x

W=914 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Rupees One Lacs Eighty One

171 1.00 Under Bench Storage Modules :- BA5C36(Qty-2) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable shelf, BA8C30 181616.73 Thousand Six Hundred Sixteen and Nos. ₹

(Qty-2) L 762 x W 559 x H 894 sink cabinet ,Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" Seventy Three Paisas Only

BSP male inlet ( bench mounting )with PP Sink bowl(Qty-2) size 480x380x300mm D, SS Peg Board(Qty-2) ,with Base Support

Panel,Metal Raceway 10D 5H without Electic Fittings (Running Meters), Rubber Moulding(Running Meters),

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-4) with 1 socket 16 Amp

switch without wiring-SC5A112(Qty-2) -Service column 127D 254W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-35

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6294+1118+1

corner (1067X1067) mm x W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer

cycle Test 70 Kgs weight loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C30(Qty-2) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , Rupees Two Lacs Twenty Nine

172 2.00 BA5C36(Qty-4) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf, BA5B24Qty-1) : L 610 x W 559 x H 894, 1 229639.21 Thousand Six Hundred Thirty Nine Nos. ₹

shutter ,1 drawer & 1 adjustable Shelf, Corner BA1B18 (Qty-1) L 457 x W 559 x H 894 1 shutter ,with required Rear Support and Twenty Paisas Only

& filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) ,Rubber Moulding(Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-14) with 1 socket

Amp switch, without wiring SC5A112 (Qty-1)-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-36

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=7100 mm x

W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C30(Qty-1) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , Rupees Three Lacs Eighty Two

173 1.00 BA5C36(Qty-4) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , Sink Cabinet BA8C30(Qty-1) : L 762 x W 382848.64 Thousand Eight Hundred Forty Eight Nos. ₹

559 x H 894, 2 shutter AARN30 (Qty-2) leg space with required Rear Support & filler Panels, Metal Raceway 5D 5H without and Sixty Four Paisas Only

Electricalal Fittings (Running Meters) ,Rubber Moulding(Running Meters) Water Tap(Qty-1) :- Water Tap in brass - 3 way

with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench mounting )with PP Sink bowl(Qty-1) size

480x380x300mm D, SS Peg Board, Eye wash Spot Extractor (Qty-1) with Blower & Ducting Electricalal Fittings :- Electricalal

Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-12) with 1 socket 16 Amp switch, without wiring

SC5A112 (Qty-1)-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ]

for Size of 762 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-37

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs, SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging

on shutter for 50,000 cycles Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall

Dimensions L=7100+813+813mm x W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles,

Drawer cycle Test 70 Kgs weight loaded in drawer for 50,000 cycles Under Bench Storage Modules :-BA5C30(Qty-1) : L 762 x

W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , BA5C36(Qty-4) : L 914 x W 559 x H 894, 2 shutter ,1 drawer &

adjustable Shelf , Sink Cabinet BA8C30(Qty-2) : L 762 x W 559 x H 894 2 shutter, AKBD30 (Qty-1) leg space for the KBD / CPU Rupees Two Lacs Eighty Five

174 1.00 Trolley with required Rear Support & filler Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) 285469.45 Thousand Four Hundred Sixty Nine Nos. ₹

,Rubber Moulding(Running Meters) Water Tap(Qty-2) :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with and Forty Five Paisas Only

swivel spout 1/2" BSP male inlet ( bench mounting )with PP Sink bowl(Qty-2) size 480x380x300mm D, SS Peg Board

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-11) with 1 socket

Amp switch, Electricalal Single Phase 230 V,6/16 Amp branded make- 6 Modules plate(Qty-1) with 2 socket 16 Amp switch,

LAN Point(Qty-1) without wiring SC5A112 (Qty-1)-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-

Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-38

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs, SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging

on shutter for 50,000 cycles Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall

Dimensions L=7100+2 corner (1067X1067) mm x W=762 mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for

1,00,000 cycles, Drawer cycle Test 70 Kgs weight loaded in drawer for 50,000 cycles Under Bench Storage Modules :-

BA5C30(Qty-5) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable Shelf , BA5C36(Qty-4) : L 914 x W 559 x H 894,

shutter ,1 drawer & 1 adjustable Shelf , Sink Cabinet BA8C30(Qty-2) : L 762 x W 559 x H 894 2 shutter, Corner BA1B18 (Qty- Rupees Three Lacs Eight Thousand

175 1.00 2) L 457 x W 559 x H 894 1 shutter, AKBD30 (Qty-1) leg space for the KBD / CPU Trolley with required Rear Support & filler 308348.28 Three Hundred Forty Eight and Nos. ₹

Panels, Metal Raceway 5D 5H without Electricalal Fittings (Running Meters) ,Rubber Moulding(Running Meters) Water Twenty Eight Paisas Only

Tap(Qty-2) :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench

mounting )with PP Sink bowl(Qty-2) size 480x380x300mm D, SS Peg Board Electricalal Fittings :- Electricalal Single Phase

230 V,6/16 Amp branded make- 3 Modules plate(Qty-13) with 1 socket 16 Amp switch, Electricalal Single Phase 230 V,6/16

Amp branded make- 6 Modules plate(Qty-1) with 2 socket 16 Amp switch, LAN Point(Qty-1) without wiring SC5A112 (Qty-

2)-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of

762 mm Wide (square feet)

Wall Bench [WB]-39

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles Rupees Ninety Eight Thousand

176 5.00 Design & Construction:- Floor Mounted and welded Overall Dimensions L=4572 mm x W=762mm x H=914mm, 98980.49 Nine Hundred Eighty and Forty Nine Nos. ₹

Anit vibration table; AAVA30 (QTY -4) -L 762 X W 762 X H 914 , Metal Raceway 5D 5H without Electic Fittings (Running Paisas Only

Meters),:Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 6 Modules plate(Qty-4) with 2 socket

Amp switch without wiring-SC5A112(Qty-1) -Service column 127D 152W

Wall Bench [WB]-40

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=9640 mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :-BA5C36(Qty-2) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable- shelf, Corner Rupees Two Lacs Forty Four

177 2.00 BA1B18 (Qty-2) L 457 x W 559 x H 894 1 shutter ,AARN39(Qty-1) : Leg Space L991 x W559 x H894, BA5B24(Qty-2) : L 610 x 244117.17 Thousand One Hundred Seventeen Nos. ₹

W 559 x H 894, 1 shutter RHS ,1 drawer & 1 adjustable- shelf ,BA5A24(Qty-2) : L 610 x W 559 x H 894, 1 shutter LHS ,1 and Sixteen Paisas Only

drawer & 1 adjustable- shelf, BKBD30 (Qty-4) leg space for the KBD / CPU Trolley, with required Rear Support & filler Panels

, Metal Raceway 127D 127H without Electrical Fittings (Running Meters), Rubber Moulding(Running Meters) Electrical

Fittings :- Electrical Single Phase 230 V,,6/16 Amp branded make- 3 Modules plate(Qty-12) with 1 socket 16 Amp switch,

Electrical Single Phase 230 V,6/16 Amp branded make- 6 Modules plate(Qty-4) with 2 socket 16 Amp switch, LAN Point(Qty-

4) without wiring SC5A112-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-Square Feet [ 300 x

mm Area ] for Size of 762 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-41

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=6270mm x W

827mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight loaded

in drawer for 50,000 cycles Under Bench Storage Modules : BA5C36(Qty-6) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 Rupees Two Lacs Twenty Nine

178 1.00 adjustable- shelf, BA5B24(Qty-1) : L 610 x W 559 x H 894, 1 shutter RHS ,1 drawer & 1 adjustable- shelf, with required Rear 229410.45 Thousand Four Hundred Ten and Nos. ₹

Support & filler Panels , Metal Raceway 127D 127H without Electrical Fittings (Running Meters), Rubber Moulding(Running Forty Five Paisas Only

Meters) Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-11) with 1 socket

16 Amp switch without wiring-SC5A112-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-Square Feet [

300 x 300 mm Area ] for Size of 827 mm Wide (square feet)

Wall Bench [WB]-42

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=5486mm x W

762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight loaded

in drawer for 50,000 cycles Rupees Two Lacs Six Thousand

179 1.00 Under Bench Storage Modules : BA5C36(Qty-6) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable- shelf, with 206299.76 Two Hundred Ninety Nine and Nos. ₹

required Rear Support & filler Panels , Metal Raceway 127D 127H without Electrical Fittings (Running Meters), Rubber Seventy Five Paisas Only

Moulding(Running Meters)

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-10) with 1 socket 16 Amp

switch without wiring-SC5A112-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-43

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=8680 mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30(Qty-1) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable- shelf, Rupees Two Lacs Fifty Two

180 1.00 BA5C36(Qty-5) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable- shelf, Corner BA1B18 (Qty-1) L 457 x W 559 x H 252741.63 Thousand Seven Hundred Forty Nos. ₹

894 1 shutter ,AARN30 (Qty-1) : Leg Space L762 x W559 x H894, BA5B21(Qty-2) : L 533 x W 559 x H 894, 1 shutter RHS ,1 One and Sixty Two Paisas Only

drawer & 1 adjustable- shelf ,with required Rear Support & filler Panels , Metal Raceway 127D 127H without Electrical

Fittings (Running Meters), Rubber Moulding(Running Meters)

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-13) with 1 socket 16 Amp

switch without wiring-SC5A112-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-44

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=8115mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Under Bench Storage Modules :- BA5C30(Qty-6) : L 762 x W 559 x H 894, 2 shutter

drawer & 1 adjustable- shelf,AARN30 (Qty-2) : Leg Space L762 x W559 x H894, BA5B24(Qty-1) : L 610 x W 559 x H 894, 1 Rupees Three Lacs Forty One

181 1.00 shutter RHS ,1 drawer & 1 adjustable- shelf,BA8C30(Qty-1) Sink Cabinet L 762 x W 559 x H 894, 2 shutter ,with required 341784.12 Thousand Seven Hundred Eighty Nos. ₹

Rear Support & filler Panels , Metal Raceway 127D 127H without Electrical Fittings (Running Meters), Rubber Four and Eleven Paisas Only

Moulding(Running Meters) Water Tap(Qty-1) :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout

1/2" BSP male inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board & Eye wash Electrical

Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-9) with 1 socket 16 Amp switch

without wiring-SC5A112-Service column 127D 152W 2844H PheNos.lic Resin -Trespa Top 16mm Thickness-Square Feet [

300 x 300 mm Area ] for Size of 820 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Wall Bench [WB]-45

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=4089mm x

W=762mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30(Qty-3) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable- shelf,AARN30 Rupees One Lacs Forty Four

182 1.00 (Qty-1) : Leg Space L762 x W559 x H894, BA8C30(Qty-1) Sink Cabinet L 762 x W 559 x H 894, 2 shutter ,with required Rear 144306.52 Thousand Three Hundred Six and Nos. ₹

Support & filler Panels , Metal Raceway 127D 127H without Electrical Fittings (Running Meters), Rubber Moulding(Running Fifty Two Paisas Only

Water Tap(Qty-1) :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench

mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-4) with 1 socket 16 Amp

switch without wiring-SC5A112-Service column 127D 152W 2844H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 762 mm Wide (square feet)

Wall Bench [WB]-46

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=4215mm x

W=820mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30(Qty-1) : L 762 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable- shelf, Rupees One Lacs Forty Six

183 1.00 BA5C36(Qty-1) : L 914 x W 559 x H 894, 2 shutter ,1 drawer & 1 adjustable- shelf,AARN30 (Qty-1) : Leg Space L762 x W559 x 146613.76 Thousand Six Hundred Thirteen and Nos. ₹

H894, BA8C30(Qty-1) Sink Cabinet L 762 x W 559 x H 894, 2 shutter ,with required Rear Support & filler Panels , Metal Seventy Six Paisas Only

Raceway 127D 127H without Electrical Fittings (Running Meters), Rubber Moulding(Running Meters)

Water Tap(Qty-1) :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel spout 1/2" BSP male inlet ( bench

mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board

Electrical Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-6) with 1 socket 16 Amp

switch without wiring-SC5A112-Service column 127D 152W 2844H

Wall Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 820 mm Wide (square feet)

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=5385mm x

W=827mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Under Bench Storage Modules :- BA5C36(Qty-4) : L 914 x W 559 x H 894, 2 shutter ,1 Rupees Three Lacs Forty Four

184 1.00 drawer & 1 adjustable, 2 shutter ,AARN36 (Qty-1) : Leg Space L914 x W559 x H894, Sink Cabinet L 762 x W 559 x H 894, 2 344108.95 Thousand One Hundred Eight and Nos. ₹

shutter ,with required Rear Support & filler Panels , Metal Raceway 127D 127H without Electrical Fittings (Running Meters), Ninety Five Paisas Only

Rubber Moulding(Running Meters) Water Tap(Qty-1) :- Water Tap in brass - 3 way with 2 fixed bib taps & 1 tap with swivel

spout 1/2" BSP male inlet ( bench mounting )with PP Sink bowl(Qty-1) size 480x380x300mm D, SS Peg Board Electrical

Fittings :- Electrical Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-8) with 1 socket 16 Amp switch

without wiring-SC5A112-Service column 127D 152W 2844H Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm

Area ] for Size of 827 mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Island Bench [IB]-1

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=2997mm x

W=1524mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Under Bench Storage Modules :- BB2C30 (Qty-2) : L 762 x W 559 x H 737, 2 shutters

Rupees One Lacs Fifty Nine

drawer & 1 adjustable self, BB2A24/BB2B24 (Qty-2) : L 610 x W 559 x H 737, 1 shutter ,1 drawer & 1 adjustable self, BKBD30

185 2.00 159701.58 Thousand Seven Hundred One and Nos. ₹

(Qty-4) : L 762 x W 559 x H 889 with key board drawer & CPU trolley, Panel legs (Qty-2), required filler panels, CRCA metal

Fifty Eight Paisas Only

raceway without Electricalal fittings : D254 x H127 (Running Meters), Rubber Moulding (Running Meters) Electricalal Fittings

:- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-10) with 1 socket 16 Amp switch,

Modules plate (Qty-4) with 2 sockets 16 Amp switches, lan points (Qty-4), without wiring SC5C118 (Qty-1)-Service column

127D 254W 2997H, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 1524mm Wide (square

Island Bench [IB]-2

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3556mm x

W=1524mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BB2C30 (Qty-2) : L 762 x W 559 x H 737, 2 shutters ,1 drawer & 1 adjustable self, Rupees One Lacs Ninety Thousand

186 8.00 BB2A24/BB2B24 (Qty-4) : L 610 x W 559 x H 737, 1 shutter ,1 drawer & 1 adjustable self, BKBD30 (Qty-4) : L 762 x W 559 x H 190573.47 Five Hundred Seventy Three and Nos. ₹

889 with key board drawer & CPU trolley, required filler panels, CRCA metal raceway without Electricalal fittings : D254 x Forty Six Paisas Only

H127 (Running Meters), Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-12) with 1 socket

Amp switch, 6 Modules plate (Qty-4) with 2 sockets 16 Amp switches, lan points (Qty-4), without wiring SC5C118 (Qty-1)-

Service column 127D 254W 2997H, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of

1524mm Wide (square feet)

Island Bench [IB]-3

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3404mm x

W=1524mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BB2A21/BB2B21 (Qty-6) : L 533 x W 559 x H 737, 1 shutter ,1 drawer & 1 adjustable self, Rupees Two Lacs Forty Four

187 5.00 BB1B21/BB1C21 (Qty-2) : L 533 x W 559 x H 737, 1 shutter & 1 adjustable self, BKBD24 (Qty-4) : L 610 x W 559 x H 889 with 244709.24 Thousand Seven Hundred Nine and Nos. ₹

key board drawer & CPU trolley, required filler panels, CRCA metal raceway without Electricalal fittings : D254 x H127 Twenty Four Paisas Only

(Running Meters), Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-12) with 1 socket

Amp switch, 6 Modules plate (Qty-4) with 2 sockets 16 Amp switches, lan points (Qty-4), without wiring SC5C118 (Qty-1)-

Service column 127D 254W 2997H, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of

1524mm Wide (square feet) and HDPE Pipe for Waste Collection (Running Meters)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Island Bench [IB]-4

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=2997mm x

W=1829mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BB2C30 (Qty-2) : L 762 x W 559 x H 737, 2 shutters ,1 drawer & 1 adjustable self, Rupees Three Lacs Thirty One

188 2.00 BB2A24/BB2B24 (Qty-2) : L 610 x W 559 x H 737, 1 shutter ,1 drawer & 1 adjustable self, BKBD30 (Qty-4) : L 762 x W 559 x H 331421.72 Thousand Four Hundred Twenty Nos. ₹

889 with key board drawer & CPU trolley, Panel legs (Qty-2), required rear supports & filler panels, CRCA metal raceway One and Seventy Two Paisas Only

without Electricalal fittings : D254 x H127 (Running Meters), Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-10) with 1 socket

Amp switch, 6 Modules plate (Qty-4) with 2 sockets 16 Amp switches, lan points (Qty-4), without wiring SC5C118 (Qty-1)-

Service column 127D 254W 2997H, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of

1829mm Wide (square feet) and ceiling mounted spot extractor (Qty-1) with blower & ducting.

Island Bench [IB]-5

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3861mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30 (Qty-8) : L 762 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, Sink Rupees Four Lacs Twenty One

189 1.00 cabinet BA8E56 (Qty-1) : L 1422 x W 711 x H 889, 2 shutters, with required filler Panels, Max Plus island B on table 421886.44 Thousand Eight Hundred Eighty Six Nos. ₹

(PMIBB42C : Qty-2) with shelves & Electricalal box : L 1067 x W 711 x H 1219, Max Plus island B on table (PMIBB30C : Qty-1) and Forty Three Paisas Only

with shelves & Electricalal box : L 762 x W 711 x H 1219, Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-10) with 1 socket

Amp switch, without wiring SC5D112 (Qty-1)-Service column 127D 305W 2845H, PP sink (Qty-1) with 3 way water tap, eye

wash & SS peg board, Trespa Top 16mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 1524mm Wide (square

Island Bench [IB]-6

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3099mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

Rupees Two Lacs Twenty Thousand

190 5.00 loaded in drawer for 50,000 cycles 220870.87 Eight Hundred Seventy and Eighty Nos. ₹

Under Bench Storage Modules :- BA5C30 (Qty-8) : L 762 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, required Seven Paisas Only

filler panels, CRCA metal raceway without Electricalal fittings : D254 x H127 (Running Meters), Rubber Moulding (Running

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-12) with 1 socket

Amp switch, without wiring SC5C112 (Qty-1)-Service column 127D 254W 2845H, Black Granite Top 18mm Thickness-Square

Feet [ 300 x 300 mm Area ] for Size of 1524mm Wide (square feet)

Island Bench [IB]-7

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=4623mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

Rupees Three Lacs Twenty Six

191 1.00 loaded in drawer for 50,000 cycles 326244.15 Thousand Two Hundred Forty Four Nos. ₹

Under Bench Storage Modules :- BA5C30 (Qty-12) : L 762 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, required

and Fourteen Paisas Only

filler panels, CRCA metal raceway without Electricalal fittings : D254 x H127 (Running Meters), Rubber Moulding (Running

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-18) with 1 socket

Amp switch, without wiring SC5C112 (Qty-1)-Service column 127D 254W 2845H, Black Granite Top 18mm Thickness-Square

Feet [ 300 x 300 mm Area ] for Size of 1524mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Island Bench [IB]-8

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3556mm x

W=1524mm x H=762mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BB2C30 (Qty-2) : L 762 x W 559 x H 737, 2 shutters ,1 drawer & 1 adjustable self, Rupees Three Lacs Thirty Nine

192 5.00 BB2A24/BB2B24 (Qty-4) : L 610 x W 559 x H 737, 1 shutter ,1 drawer & 1 adjustable self, BKBD30 (Qty-4) : L 762 x W 559 x H 339105.27 Thousand One Hundred Five and Nos. ₹

889 with key board drawer & CPU trolley, required filler panels, CRCA metal raceway without Electricalal fittings : D254 x Twenty Seven Paisas Only

H127 (Running Meters), Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-12) with 1 socket

Amp switch, 6 Modules plate (Qty-4) with 2 sockets 16 Amp switches, lan points (Qty-4), without wiring SC5C118 (Qty-1)-

Service column 127D 254W 2997H, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of

1524mm Wide (square feet) and ceiling mounted spot extractor (Qty-1) with blower & ducting.

Island Bench [IB]-9

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3861mm x

W=1829mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30 (Qty-8) : L 762 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, Sink Rupees Three Lacs Sixty Five

193 5.00 cabinet BA8E56 (Qty-1) : L 1422 x W 711 x H 889, 2 shutters, with required rear supports & filler Panels, Max Plus island B 365962.00 Thousand Nine Hundred Sixty Two Nos. ₹

on table (PMIBB42C : Qty-2) with shelves & Electricalal box : L 1067 x W 711 x H 1219, Max Plus island B on table Only

(PMIBB30C : Qty-1) with shelves & Electricalal box : L 762 x W 711 x H 1219, Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-10) with 1 socket

Amp switch, without wiring SC5D112 (Qty-1)-Service column 127D 305W 2845H, PP sink (Qty-1) with 3 way water tap & SS

peg board, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 1829mm Wide (square feet)

Island Bench [IB]-10

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3810mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30 (Qty-8) : L 762 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, Sink

cabinet BA8E56 (Qty-1) : L 1422 x W 711 x H 889, 2 shutters, with required filler Panels, Max Plus island B on table Rupees Five Lacs Six Hundred Sixty

(PMIBB42C : Qty-2) with shelves & Electricalal box : L 1067 x W 711 x H 1219, Max Plus island B on table (PMIBB30C : Qty-1) Six and Ninety Two Paisas Only

with shelves & Electricalal box : L 762 x W 711 x H 1219, Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-10) with 1 socket

Amp switch, without wiring SC5D112 (Qty-1)-Service column 127D 305W 2845H, PP sink (Qty-1) with 3 way water tap, eye

wash & SS peg board, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 1524mm Wide

(square feet) and ceiling mounted spot extractor (Qty-1) with blower & ducting.

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Island Bench [IB]-11

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3810mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles Under Bench Storage Modules :- BA5C30 (Qty-2) : L 762 x W 559 x H 889, 2 shutters

drawer & 1 adjustable self, BA5C36 (Qty-2) : L 914 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, Rupees Three Lacs Seven

195 5.00 BA5A24/BA5B24 (Qty-2) : L 610 x W 559 x H 889, 1 shutter ,1 drawer & 1 adjustable self, Sink cabinet BA8E56 (Qty-1) : L 307810.03 Thousand Eight Hundred Ten and Nos. ₹

1422 x W 711 x H 889, 2 shutters, AKBD30 (Qty-2) : L 762 x W 559 x H 889 with Key board drawer & CPU trolley, with Two Paisas Only

required filler Panels, Max Plus island B on table (PMIBB42C : Qty-2) with shelves & Electricalal box : L 1067 x W 711 x H

1219, Max Plus island B on table (PMIBB30C : Qty-1) with shelves & Electricalal box : L 762 x W 711 x H 1219, Rubber

Moulding (Running Meters) Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make - 3 Modules plate

(Qty-10) with 1 socket 16 Amp switch, 6 Modules plate (Qty-2) with 2 socket 16 Amp switch, lan point (Qty-2), without

wiring SC5D112 (Qty-1)-Service column 127D 305W 2845H, PP sink (Qty-1) with 3 way water tap & SS peg board, Black

Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 1524mm Wide (square feet)

Island Bench [IB]-12

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3099mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight Rupees One Lacs Eighty Seven

196 1.00 loaded in drawer for 50,000 cycles Under Bench Storage Modules :- BA5C30 (Qty-6) : L 762 x W 559 x H 889, 2 shutters ,1 187602.73 Thousand Six Hundred Two and Nos. ₹

drawer & 1 adjustable self, AARN30 (Qty-2) : L 762 x W 559 x H 889 leg space, required filler panels, CRCA metal raceway Seventy Two Paisas Only

without Electricalal fittings : D254 x H127 (Running Meters), Rubber Moulding (Running Meters) Electricalal Fittings :-

Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-14) with 1 socket 16 Amp switch, without

wiring SC5C112 (Qty-1)-Service column 127D 254W 2845H, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm

Area ] for Size of 1524mm Wide (square feet)

Island Bench [IB]-13

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3048mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30 (Qty-4) : L 762 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, Sink Rupees Three Lacs Thirty Eight

cabinet BA8E56 (Qty-1) : L 1422 x W 711 x H 889, 2 shutters, with required filler Panels, AARN30 (Qty-2) : L 762 x W 559 x H Thousand Nine Hundred Fifty Only

889 leg space, Max Plus island B on table (PMIBB42C : Qty-2) with shelves & Electricalal box : L 1067 x W 711 x H

Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-8) with 1 socket 16 Amp

switch, without wiring SC5D112 (Qty-1)-Service column 127D 305W 2845H, PP sink (Qty-1) with 3 way water tap & SS peg

board, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 1524mm Wide (square feet)

Island Bench [IB]-14

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3810mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30 (Qty-8) : L 762 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, Sink Rupees Three Lacs Thirty Eight

198 5.00 cabinet BA8E56 (Qty-1) : L 1422 x W 711 x H 889, 2 shutters, with required filler Panels, Max Plus island B on table 338632.23 Thousand Six Hundred Thirty Two Nos. ₹

(PMIBB42C : Qty-2) with shelves & Electricalal box : L 1067 x W 711 x H 1219, Max Plus island B on table (PMIBB30C : Qty-1) and Twenty Three Paisas Only

with shelves & Electricalal box : L 762 x W 711 x H 1219, Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-10) with 1 socket

Amp switch, without wiring SC5D112 (Qty-1)-Service column 127D 305W 2845H, PP sink (Qty-1) with 3 way water tap & SS

peg board, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 1524mm Wide (square feet)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Island Bench [IB]-15

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=3810mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30 (Qty-8) : L 762 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, Sink Rupees Four Lacs Eight Hundred

199 1.00 cabinet BA8E56 (Qty-1) : L 1422 x W 711 x H 889, 2 shutters, with required filler Panels, Max Plus island B on table 400800.39 Nos. ₹

and Thirty Nine Paisas Only

(PMIBB42C : Qty-2) with shelves & Electricalal box : L 1067 x W 711 x H 1219, Max Plus island B on table (PMIBB30C : Qty-1)

with shelves & Electricalal box : L 762 x W 711 x H 1219, Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate (Qty-10) with 1 socket

Amp switch, without wiring SC5D112 (Qty-1)-Service column 127D 305W 2845H, PP sink (Qty-1) with 3 way water tap & SS

peg board, Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 1524mm Wide (square feet)

and ceiling mounted spot extractor (Qty-1) with blower & ducting.

Peninsular Bench [PB]-1

MOC :- CRCA 1.2/2 mm Thickness, Cabinet Load Test with 900 Kgs,

SEFA 8M Compliant:- Hinge Test 90 Kgs weight hanging on shutter for 50,000 cycles

Design & Construction:- Floor Mounted and welded Nos. loose panels are accepted, Overall Dimensions L=17885mm x

W=1524mm x H=914mm, Door Cycle Test 68 Kgs hanging on shutter for 1,00,000 cycles, Drawer cycle Test 70 Kgs weight

loaded in drawer for 50,000 cycles

Under Bench Storage Modules :- BA5C30 (Qty-2) : L 762 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, BA5C36 Rupees Eight Lacs Sixty Four

200 1.00 (Qty-22) : L 914 x W 559 x H 889, 2 shutters ,1 drawer & 1 adjustable self, AARN30 (Qty-12) : L 762 x W 559 x H 889, leg 864712.96 Thousand Seven Hundred Twelve Nos. ₹

space, AARN36 (Qty-4) : L 914 x W 559 x H 889, leg space, with required base support & filler Panels, Metal Raceway 254D x and Ninety Six Paisas Only

127H without Electricalal fittings (Running Meters), Rubber Moulding (Running Meters)

Electricalal Fittings :- Electricalal Single Phase 230 V,6/16 Amp branded make- 3 Modules plate(Qty-48) with 1 socket

Amp switch, without wiring SC5C112 (Qty-3)-Service column 127D 254W 2845H

Black Granite Top 18mm Thickness-Square Feet [ 300 x 300 mm Area ] for Size of 1524 mm Wide (square feet)

JT1D36 - Floor Mounted Tall Cabinet size of 914L 559W 2134H with two numbers solid Metal Shutters, Lock and MOC :- Rupees Thirty Thousand Three

201 90.00 CRCA 1.2/2 mm Thickness. 30349.16 Hundred Forty Nine and Fifteen Nos. ₹

SARA30- CRCA SLOTTED ANGLE RACK 762L 457D 2134H

Rupees Seven Thousand Seventeen

and Ninety Eight Paisas Only

SARA36- CRCA SLOTTED ANGLE RACK 914L 457D 2134H

Rupees Seven Thousand Two

Hundred Four and Thirty Paisas Only

VC1A36 - Ventilated Chemical Storage Cabinet size of 914L 559D 2134H with lock, MOC :- CRCA 1.2/2 mm Thickness, Two Rupees Fifty Three Thousand Six

204 40.00 numbers Toughened Glass shutters and five numbers adjustable shelves. 53618.23 Hundred Eighteen and Twenty Two Nos. ₹

SAFETY SHOWER WITH EYE WASH FLOOR MOUNTED Rupees Twenty Five Thousand Five

205 7.00 25577.35 Hundred Seventy Seven and Thirty Nos. ₹

Four Paisas Only

XGEN Bench Fume Hood size of 1829L x 991D x 2286H

Product Code - FHBV6B-Bench FH Structure with Vertical Sash 1829L 991D 1397H

Rear Support 1829L 279D 889H

FH 6/16A Socket & Switch 3M Single phase(3 QtY)

FH Wire Manager(1-QTY)

Rupees Two Lacs Forty Thousand

FH LED Lighting Fixture(1-QTY)

206 13.00 240381.49 Three Hundred Eighty One and Forty Nos. ₹

FH Tube Light ON-OFF Rocker Switch(1-QTY)

Eight Paisas Only

FH Raw weater - 90 Spout & Hoses 1-1.5 MT(1-QTY)

FH Nitrogen - 45 Spout & Hoses 1-1.5 MT(1-QTY)

FH Compressed Air- 45 Spout & Hoses 1-1.5 MT(1-QTY)

6 FT FH Granite Work Surface 39D(1-QTY)

FH Drip Cup-PP Oval With Drain Pipe (1-QTY)

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Bench fume hood base cabinet 914 L X 559D X 889 H with 2 shutter, Louvers , 1 Adjustable Shelf, Exhaust. Rupees Nineteen Thousand Three

207 55.00 19304.63 Hundred Four and Sixty Three Nos. ₹

Taper Cone Adaptor & Manual Butter Fly Valves Rupees Twelve Thousand One

208 8.00 12183.14 Hundred Eighty Three and Thirteen Nos. ₹

Rubber Moulding for Fume hood, Ventilated Cabinet & Tall Cabinet

Rupees Three Hundred Seventy

Seven and Eighty One Paisas Only

PP-FRP / HDPE DUCTING MATERIAL FOR FH's-Fabricated at site [ 3 mm PPGL + 2 mm FRP ] Rupees Three Thousand Nine

210 375.00 3933.38 Hundred Thirty Three and Thirty SMT ₹

Eight Paisas Only

PP-FRP / HDPE DUCTING MATERIAL FOR VC's -Fabricated at site [ 3 mm PPGL + 2 mm FRP ] Rupees Three Thousand Nine

211 350.00 3933.38 Hundred Thirty Three and Thirty SMT ₹

Eight Paisas Only

FH Motor Protection Circuit Breaker 1.5 HP(1-QTY per cluster) Rupees Three Thousand Two

212 13.00 3229.51 Hundred Twenty Nine and Fifty One Nos. ₹

MP1-5HPM-MOTOR PROTECTION CIRCUIT BREAKER 1.5 HP WITH MOUNTING BOX Rupees Twenty Five Thousand Five

213 7.00 25577.35 Hundred Seventy Seven and Thirty Nos. ₹

Four Paisas Only

FH PP Blower 1.0 HP Without DOL Starter for 1 Nos. FH having Imported Casing & Impeller IS 325 TEFC 415V-3Ph, 1440 Rupees Fifty One Thousand One

214 3.00 RPM, Ind. Ele Motor of Crompton / Havells Make and Base Frame 51154.69 Hundred Fifty Four and Sixty Nine Nos. ₹

FH PP Blower 1.5 HP Without DOL Starter for 2 Nos. of FH having Imported Casing & Impeller IS 325 TEFC 415V-3Ph, 1440 Rupees Seventy Six Thousand

215 15.00 RPM, Ind. Ele Motor of Crompton / Havells Make and Base Frame 76721.68 Seven Hundred Twenty One and Nos. ₹

Sixty Eight Paisas Only

FH PP Blower 1.5 HP Without DOL Starter for 10 Nos. VC (Calculated blower capacity with 50% diversity) Rupees Seventy Six Thousand

216 10.00 76721.68 Seven Hundred Twenty One and Nos. ₹

Sixty Eight Paisas Only

Supply and installation of Main Table - 1800L x 800D x 750H Table top Made of 25mm thick Sandwich Made of Particle

Board 25mm thick Sandwich with matching PVC edge banding. Post forming ages - 18mm thick modesty panel Pre

Laminated both sides. Support structure shall be of solid wood or approved colour powder coated aluminium base frame Rupees Twenty Three Thousand Six

including pre coated metal key board drawer. Side storage - 2000L x 750 D x 750H made up of 18mm prelaminated Hundred Thirty Four Only

board with computer open drawer and file cupboard with lock. Saprate Pedestal Made of 25mm thick top with the metal

box channel with 3 Drawers on Casters. As per detail drawings and sample approval etc. comp.

Supply and installation of Main Table - 1500L x 750D x 750H Table top Made of 25mm thick Sandwich Made of Particle

Board 25mm thick Sandwich with matching PVC edge banding. Post forming ages - 18mm thick modesty panel Pre

Laminated both sides. Support structure shall be of solid wood or approved colour powder coated aluminium base frame Rupees Thirty Two Thousand Eight

including pre coated metal key board drawer. Side storage - 1800L x 450 D x 750H made up of 18mm prelaminated Hundred Twenty Five Only

board with computer open drawer and file cupboard with lock. Saprate Pedestal Made of 25mm thick top with the metal

box channel with 3 Drawers on Casters. As per detail drawings and sample approval etc. comp.

SSA CUBICAL Supply and installation of Main Table - 1200L x 750D x 750H Table top Made of 25mm thick Sandwich Made

of Particle Board 25mm thick Sandwich with matching PVC edge banding. Post forming ages - 18mm thick modesty panel

Pre Laminated both sides. Support structure shall be of solid wood or approved colour powder coated aluminium base

frame including pre coated metal key board drawer. Side storage - 1200L x 450 D x 700H made up of 18mm Rupees Forty Three Thousand Five

219 24.00 prelaminated board with computer open drawer and file cupboard with lock. Saprate Pedestal Made of 25mm thick top 43581.50 Hundred Eighty One and Fifty Paisas Nos. ₹

with the metal box channel with 3 Drawers on Casters. As per detail drawings and sample approval etc. comp. Cubical Only

Partition shall be 1200mm high comprises of alumium frame filled with 12mm prelaminated particle borad fixed with floor

and wall. As per architects drawing and detail with instructions of engineer in charge.

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

JSA CUBICAL Supply and installation of Main Table - 1200L x 600D x 750H Table top Made of 25mm thick Sandwich Made of

Particle Board 25mm thick Sandwich with matching PVC edge banding. Post forming ages Support structure shall be of solid

wood or approved colour powder coated aluminium base frame including pre coated metal key board drawer with Rupees Seventeen Thousand Six

220 132.00 computer open drawer and file cupboard with lock. As per detail drawings and sample approval etc. comp. Cubical 17646.72 Hundred Forty Six and Seventy Two Nos. ₹

Partition shall be 1200mm high comprises of alumium frame filled with 12mm prelaminated particle borad fixed with floor Paisas Only

and wall. As per architects drawing and detail with instructions of engineer in charge.

Supply and Placeing Glass Top / solid wood Frame, 600 X 600 X 450mm with top is made out of 12 mm smoke glass is fitted Rupees Three Thousand Five

on 50x50mm solid teak wood frame with horizontal frame of solid joints and mrech polish. As per detail design and Hundred Thirty Five Only

FILE STORAGE 1200 X 450 X 1200 Supply and installation of File storage cabinet with two shelve made up of 18mm

prelaminated particle board. With 50mm high frame base and 18mm thick prelaminated shutter with box type SS spring

type hinges, D type SS handle and standard make godrej lock with small SS stoper in side on one shutter. As per architects Rupees Twelve Thousand One

drawing and detail with instructions of engineer in charge. Hundred Twenty Only

SINGLE SEAT SOFA Providing & fixing 60cm wide x 70 cm depth x 60cm back height x 30cm seat height solid wood section

Rupees Seventeen Thousand Six

223 24.00 single seat sofa as per design in waiting area with 10cm yhick approved foam round top and seat with approved tapestry 17675.00 Nos. ₹

Hundred Seventy Five Only

incl. polishing etc. comp. as per Architects' Approval and instructions of EIC.

MEETING ROOM TABLE

1 Nos. AND 2000L x 600D x 750H required 4 table in each meeting room can be converted in training class room.

Table top Made of 24mm thick standard make ply wood with 1.5mm laminated board with post forming front edge and

solid 50x50mm solid teak wood support structure and 12mm prelaminated front panel with matching PVC edge bending

with french polish and rubber bussing. As per architects drawing and pre approval of sample in full scale. Gable end - Made

Rupees Five Thousand Eight

224 16.00 of 40mm thick Sandwich with matching PVC edge banding confirming to DIN 68861. 5858.00 Nos. ₹

Hundred Fifty Eight Only

Modesty Panel – 18mm thick modesty panel Pre Laminated both sides confirming to IS 12823:1990. (Optional) – Powder

coated Metal Modesty panel. Wire Management – MS Dummy Flip up 300mm with MS cable tray & Vertebra. Beams –

Powder coated MS beams confirming to IS-513

Providing & Placing High back SSO chair of 5 support legs with Suppling & positioning Seat, U-FOAM cushion covered with

approved colour and make tapestry , fix pp handle, Synchro mechanism with single back lock, gas lift for seat height

Rupees Nine Thousand Two

225 6.00 adjustment, five prong Nylon base with twin wheel nylon castors including required round and stiching etc. comp. as per 9292.00 Nos. ₹

Hundred Ninety Two Only

the manufactures detail specifications. including installations as per Architects' Approval and instructions of EIC.

Providing & Placing Medium back JSO chair of 5 support legs with Suppling & positioning Seat, U-FOAM cushion covered

with approved colour and make tapestry , fix pp handle, Synchro mechanism with single back lock, gas lift for seat height

Rupees Four Thousand Two

226 36.00 adjustment, five prong Nylon base with twin wheel nylon castors including required round and stiching etc. comp. as per 4242.00 Nos. ₹

Hundred Forty Two Only

the manufactures detail specifications. including installations as per Architects' Approval and instructions of EIC.

Providing & Placing Medium back SSA chair of 5 support legs with Suppling & positioning Seat, U-FOAM cushion covered

with approved colour and make tapestry , fix pp handle, Synchro mechanism with single back lock, gas lift for seat height

Rupees Three Thousand Eight

227 24.00 adjustment, five prong Nylon base with twin wheel nylon castors including required round and stiching etc. comp. as per 3838.00 Nos. ₹

Hundred Thirty Eight Only

the manufactures detail specifications. including installations as per Architects' Approval and instructions of EIC.

Providing & Placing Medium back JSA chair of 5 support legs with Suppling & positioning Seat, U-FOAM cushion covered

with approved colour and make tapestry , fix pp handle, Synchro mechanism with single back lock, gas lift for seat height

Rupees Three Thousand One

228 132.00 adjustment, five prong Nylon base with twin wheel nylon castors including required round and stiching etc. comp. as per 3131.00 Nos. ₹

Hundred Thirty One Only

the manufactures detail specifications. including installations as per Architects' Approval and instructions of EIC.

Providing & Placing Medium back VISITOR CHAIR of fixed legs with Suppling & positioning Seat, U-FOAM cushion covered

Rupees Two Thousand Eight

229 120.00 with approved colour and make tapestry , fix pp handle etc. comp. as per the manufactures detail specifications. including 2828.00 Nos. ₹

Hundred Twenty Eight Only

installations as per Architects' Approval and instructions of EIC.

Providing, placing of REVOLVING LABORATORY STOOL of size length 300mmØ Stainless steel dish type top with height

Rupees Six Hundred Fifty Six and

230 600.00 adustment of 450 to 600mm machine screw machanism with 30mmØ tubular CRCA farme with rubberized top tubular legs 656.50 Nos. ₹

Fifty Paisas Only

fitted with PVC stumps. including chemically pretreated powder coated finish.

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

FIRE PUMP : Electrical operated Main Fire Pump (2280 lpm, 88MWC ) head 65 RMT. Electrical motor driven main pump of

horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2850 LPM at 88 MWC. The Rupees Three Lacs Ten Thousand

pump shall be coupled to TEFC motor of suitable HP with speed of 2900 RPM and complete set shall mounted on common Twenty Nine and Ten Paisas Only

FIRE PUMP : Diesel Driven Pump (2280 lpm )head 65RMT.Diesel Engine pump of horizontal centrifugal end suction backpull

out type with gland packing and capable to deliver 2850 LPM at 88 MWC. The pump shall coupled to suitable HP of Diesel

engine radiator water cooled type with speed of 1800 RPM and complete set shall be mounted on common base frame. Rupees Six Lacs Twenty Four

232 1.00 Batteries & battery leads with stand, Fuel tank (for 2 Hrs. operation) with stand & gauge glass, Fuel piping with valves. The 624292.35 Thousand Two Hundred Ninety Two Nos. ₹

quoted rate shall includes radiator water cooling piping (if required) coupling guard and other standard accessories, RCC and Thirty Five Paisas Only

foundation as recommended by manufacturer and foundation bolts etc., complete.

JOCKEY PUMP : Electrical operated Pump (180 lpm) head 65 RMT. Electrical motor driven Jockey pump of horizontal

Rupees One Lacs Fifty Four

centrifugal end suction backpull out type with gland packing and capable to deliver 180 LPM at 88 MWC. The pump shall be

233 1.00 154370.87 Thousand Three Hundred Seventy Nos. ₹

coupled to TEFC motor of suitable HP with speed of 2900RPM and complete set shall mounted on common base frame.

and Eighty Seven Paisas Only

M.S.Pipes conforming to IS:1239 Pt - I Heavy grade class-C for 15NB to 150NB and IS:3589 Gr 410 ERW Pipe(min 6mm thick)

for 200NB & Above with suitable type Pipe fittings such as Reducers, Tees, elbows, flanges. including cutting, grooving,

Rupees Four Thousand Two

234 30.00 Welding, fixing in / on walls, ceiling by using suitable supports etc, as per drawings with painting as PO Red as per shade 536 4290.00 RMT ₹

Hundred Ninety Only

of IS:5 for Above ground piping MS BLACK PIPE "C" CLASS - 200mm x 6mm BKPE IS:3589/Gr.330

MS BLACK PIPE "C" CLASS - 150mm, Jindal Hissar Rupees Three Thousand Nineteen

MS BLACK PIPE "C" CLASS - 100mm, Jindal Hissar Rupees Two Thousand Two

Hundred Seven Only

MS BLACK PIPE "C" CLASS - 80mm, Jindal Hissar

Rupees One Thousand Five

Hundred Thirty Five Only

MS BLACK PIPE "C" CLASS - 65mm, Jindal Hissar Rupees One Thousand Two

Hundred Forty Five Only

MS BLACK PIPE "C" CLASS - 40mm, Jindal Hissar Rupees Seven Hundred Twenty

MS BLACK PIPE "C" CLASS - 25mm, Jindal Hissar

240 450.00 450.00 Rupees Four Hundred Fifty Only RMT ₹

Bronze Ball valve with (suitable for test pressure of Nos.t less than 15 Kg / sqcm of the following size including providing Rupees Three Thousand Six and

necessary union / flange. Bronze Ball Valve (Screwed) - 50mm, Make - Zoloto Nineteen Paisas Only

Bronze Ball Valve (Screwed) - 25mm, Make - Zoloto Rupees One Thousand Two

Hundred Seventy and Thirty Seven

Bronze Ball Valve (Screwed) - 15mm, Make - Zoloto

Rupees Nine Hundred Seven and

Twenty One Paisas Only

CI Gate valves with all accessories inline with the tech specs 15360 Rupees Fifty Five Thousand Nine

CI Sluice Valve/Gate Valve, Handwheel Operated, Nos.n Rising - 200mm Hundred Nineteen and Fourteen

CI Sluice Valve/Gate Valve, Handwheel Operated, Nos.n Rising - 80mm Rupees Seventeen Thousand Six

245 1.00 17618.23 Hundred Eighteen and Twenty Three Nos. ₹

C.I. Butterfly valves of Class-150 rating as per IS:13095 of following dia including necessary fittings like Companion Rupees Eleven Thousand Six

246 3.00 flanges,nut ,bolt & gaskets etc. complete. 11694.49 Hundred Ninety Four and Forty Nine Nos. ₹

Butterfly Valve (Lever Operated) - - 150mm dia. BFV-SG Disc Gear Operated PN16 Paisas Only

Butterfly Valve (Lever Operated) - 65mm dia. BFV-SG Disc Rupees Five Thousand Eight

247 1.00 5870.05 Hundred Seventy and Four Paisas Nos. ₹

C.I. Dual Plate Wafer Type Check Valve following dia including necessary fittings like Companion flanges,nut ,bolt & gaskets Rupees Fifteen Thousand Two

248 2.00 etc. complete. 15245.71 Hundred Forty Five and Seventy One Nos. ₹

150mm, Make - Zoloto Paisas Only

Cast Iron Dual Plate Wafer Type Check Valve - 65mm, Make - Zoloto Rupees Eight Thousand Two

249 1.00 8234.28 Hundred Thirty Four and Twenty Nos. ₹

Eight Paisas Only

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Spring loaded Air Release Valve suitable for pressure of 15 Kg / sq.cm including flanges, nuts, bolts, washers etc. complete Rupees Four Thousand One

250 1.00 as required. GM AIR RELEASE VALVE - 25MM 4173.69 Hundred Seventy Three and Sixty Nos. ₹

Nine Paisas Only

Supplying, installing and commissioning C.I.flanged "Y" type Strainer with SS mesh,suitable flanges, nuts, bolts, gaskets etc. Rupees Fifty Two Thousand Three

251 2.00 complete. 52307.82 Hundred Seven and Eighty Two Nos. ₹

"Y" Strainers - 200mm Dia Paisas Only

Pressure Switches of suitable range complete for isolation and fittings such as unions / elbows / reducers etc. (IPS -100) Rupees Four Thousand Three

252 3.00 4370.88 Hundred Seventy and Eighty Eight Nos. ₹

Pressure gauge of suitable range(0-16Kg/cm^2) complete for isolation and fittings such as unions / elbows / reducers etc. Rupees One Thousand Six

253 4.00 100mm dia 1696.39 Hundred Ninety Six and Thirty Nine Nos. ₹

MS Class B diesel engine exhaust pipe (including all fittings, clamps, steel support) of suitable dia for the engine. The pipe Rupees Seven Thousand Nine

254 18.00 shall be provided with 12 mm thick supercera ceramic fiber rope. 150MM 7974.86 Hundred Seventy Four and Eighty Six Nos. ₹

Fire brigade draw out Connection from tank with 100 mm dia GI (Heavy lass) pipe and foot valve (Pipe max 8 M long).

Rupees Seventy Four Thousand

255 1.00 (SINGLE WAY AS NI 112) 74011.21 Nos. ₹

Eleven and Twenty One Paisas Only

4 Way Fire Brigade Inlet CI BODY connection in FW TANK with Butterfly valve-150NB with all other accessories located in Rupees Twenty Six Thousand Seven

256 1.00 Fire Water Tank. 26789.78 Hundred Eighty Nine and Seventy Nos. ₹

Eight Paisas Only

MS fabricated Air Vessel Cushion Tank at pump room about 300mm dia and 1200mm high on MS stand with necessary cut Rupees Forty Eight Thousand One

257 1.00 off drain and air release arrangements and leading the drain pipe to the sump at pump room. 48124.80 Hundred Twenty Four and Eighty Nos. ₹

Resilient rubber neoprene lined single arch vibration eliminators suitable for raw water up to 70 deg.C temperature working Rupees Twenty Two Thousand Six

258 3.00 pressure 15 Kg per square centimetre. 22628.42 Hundred Twenty Eight and Forty Nos. ₹

200 NB double flanged flexicon rubber expansion joint 200mm Two Paisas Only

EXPENSION/JOINT/RUBBER BELLOW - 150MM Rupees Sixteen Thousand Seven

259 3.00 16782.76 Hundred Eighty Two and Seventy Six Nos. ₹

EXPENSION/JOINT/RUBBER BELLOW - 80MM Rupees Eleven Thousand Two

260 1.00 11254.19 Hundred Fifty Four and Nineteen Nos. ₹

EXPENSION/JOINT/RUBBER BELLOW - 65MM Rupees Nine Thousand Four

261 1.00 9428.50 Hundred Twenty Eight and Forty Nos. ₹

Nine Paisas Only

Pump Control Panel with all necessary wiring work including control and instrumentation, etc complete. MCC PANEL Rupees Four Lacs Eighty Eight

262 1.00 488721.20 Thousand Seven Hundred Twenty Nos. ₹

One and Twenty Paisas Only

RUBBER MAT of size 1200mm x1000mm x 12mm thick Rupees Three Thousand Seven

263 1.00 3798.40 Hundred Ninety Eight and Thirty Nos. ₹

Nine Paisas Only

STRUCTURAL STEEL SUPPORTS such as MS channels, angles, flats, rods as required at site with anchor fasteners, clamps,

Rupees One Hundred Eighty Six

264 400.00 threaded rods, nuts, bolts, washers etc. complete with painting. 186.62 Nos. ₹

and Sixty Two Paisas Only

SS single fire hydrant valve with 80 N.B. flanged inlet, brass spindle controlled 63mm dia female instantaneous outlet type. Rupees Twelve Thousand Two

265 30.00 SS coupling, blank cap, chain, twist release type lug & all accessories Complete. 12206.52 Hundred Six and Fifty Two Paisas Nos. ₹

63mm dia instantaneous pattern branch short SS pipe, 20 mm dia Nos.zzle conforming to IS 903, suitable for inter Rupees Three Thousand Six

266 4.00 connection to hose pipe coupling complete as required. 3696.27 Hundred Ninety Six and Twenty RMT ₹

Seven Paisas Only

63mm dia Hose pipe Reinforced Rubber lined as per IS 636 Type-A - 15 M X 1 Nos. standard length including S.S. male and Rupees Eight Thousand Two

267 8.00 female Coupling duely bound with aluminium wire,etc CP HOSE With SS COUPLING Size:63mmx15M WITH ISI MARK 8297.38 Hundred Ninety Seven and Thirty Nos. ₹

Eight Paisas Only

C.I. Butterfly valves of Class 150 rating as per IS:13095 of following dia including necessary fittings like Companion Rupees Eleven Thousand Six

268 4.00 flanges,nut ,bolt & gaskets etc. complete. Butterfly Valve (Lever Operated) - 150mm dia 11610.96 Hundred Ten and Ninety Six Paisas Nos. ₹

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Weather proof lockable cabinet of size Nos.t less than 0.75 x 0.6 x 0.23 RMT made out of MS sheet of 16 gauge thickness

having central opening and 4 mm thick glazed glass doors (Two Nos.) suitably marked FIRE on the outside. Rupees Nine Thousand Eighty Six

Fire hose cabinet, MS, 16 SWG, Size 750 x 600 x 250 mm, Enamel painted (Fire Red) and Fifty Nine Paisas Only

4 Way Fire Brigade Inlet body connection in Mains near suitable location with NRV-150NB & Butterfly valve-150NB with all Rupees Thirty Five Thousand Four

270 1.00 other accessories located in Hydrant Ring. 35408.11 Hundred Eight and Eleven Paisas Nos. ₹

Excavation in all types of soil for laying pipes up to 300mm dia. including forming bottom surface to required level, refilling

Rupees Eight Hundred Ten and

271 80.00 sand till 200mm around the pipe in layers 150mm thick, watering, consolidating and disposing off the surplus earth within 810.17 CMT ₹

Seventeen Paisas Only

the site as directed by the site engineer.

Excavation, Backfilling of trenches for underground mains, S.V. Chamber, Inspection & Welding pits, etc. (in dry area) - Sand

Rupees One Hundred Thirty Four

272 15.00 Bedding 134.08 CMT ₹

and Eight Paisas Only

RCC Hume Pipe-2.0m NP-2 class length each for road crossing of Fire Water Pipe DIA300mm Rupees One Thousand Nine

273 25.00 1908.79 Hundred Eight and Seventy Nine RMT ₹

Coating & Wrapping for underground pipe Wrapping Tape(150mm wide x 4mm thick)

Rupees Six Hundred Seventy Four

and One Paisas Only

Providing & fixing S.S. fire hydrant Twin headed landing valve as per IS:5290 Type-A with 80 N.B. flanged inlet, brass spindle Rupees Twenty Four Thousand One

275 10.00 controlled 63 mm dia female instantaneous outlet type. S.S. Coupling, blank cap, chain, twist release type lug & all 24164.90 Hundred Sixty Four and Ninety Nos. ₹

accessories Complete. Paisas Only

Providing and fixing 63 mm dia instantaneous pattern S.S. branch pipe, 20 mm dia Nos.zzle conforming to IS 903, suitable Rupees Three Thousand Six

276 10.00 for inter connection to hose pipe coupling complete as required. 3669.68 Hundred Sixty Nine and Sixty Eight RMT ₹

Providing & fixing swinging type First Aid hose reel in red colour drum with 36 mts long and 19 mm dia heavy duty PVC hose, Rupees Seventeen Thousand One

277 10.00 20 mm dia globe valve stop cock, terminating with G.M. coupling & triple purpose Nos.zzle of 6mm outlet with shut off cock. 17149.07 Hundred Forty Nine and Seven RMT ₹

Supplying and fixing 63mm dia Hose pipe Reinforced Rubber lined as per IS 636 Type-A - 15 M X 1 Nos. standard length Rupees Eight Thousand Two

278 20.00 including S.S. male and female Coupling duely bound with aluminium wire,etc 8241.62 Hundred Forty One and Sixty Two RMT ₹

Providing and fixing standard firemans axe with heavy rubber handle. Rupees One Thousand Two

279 10.00 1268.91 Hundred Sixty Eight and Ninety One Nos. ₹

Supplying , installing, testing and commissioning of C.I. Butterfly Valve Lever Operated Wafer Type - 150mm, of Class 150 Rupees Eleven Thousand Five

280 2.00 rating as per IS:13095, Wafer type of following dia including necessary fittings like Companion flanges,nut ,bolt & gaskets 11567.45 Hundred Sixty Seven and Forty Five Nos. ₹

etc. complete. Paisas Only

Providing and fixing lockable cabinet of size Nos.t less than 0.75 x 0.6 x 0.25 RMT made out of MS sheet of 16 gauge

Rupees Nine Thousand Twenty One

281 14.00 thickness having central opening and 4 mm thick glazed glass doors (Two Nos.) Enamel painted (Fire Red) suitably marked 9021.22 Nos. ₹

and Twenty Two Paisas Only

FIRE on the outside.

Supplying , installing, testing and commissioning of 25mm Bronze Ball valve with (suitable for test pressure of Nos.t less Rupees Twelve Thousand Four

282 14.00 than 15 Kg / sqcm of the following size including providing necessary union / flange. 12449.28 Hundred Forty Nine and Twenty Nos. ₹

Eight Paisas Only

Bronze Ball Valve (Screwed) - 15mm, Make - Zoloto

Rupees Eight Hundred Ninety Four

and Twenty Five Paisas Only

Supplying & Fixing of 100mm dia Pressure guage of suitable range(0-16Kg/cm^2) complete for isolation and fittings such as Rupees One Thousand Six

284 2.00 unions / elbows / reducers etc. 1672.16 Hundred Seventy Two and Sixteen Nos. ₹

Providing & Fixing of Air Release Valve suitable for pressure of 15 Kg / sq.cm including flanges, nuts, bolts, washers etc.

Rupees Four Thousand Fifty Two

285 2.00 complete as required. 4052.49 Nos. ₹

and Forty Nine Paisas Only

Terrace Pump 900LPM with 35 MWC BOOSTER PUMP FOR 12.5 HP Rupees One Lacs Seventeen

286 1.00 117701.80 Thousand Seven Hundred One and Nos. ₹

Eighty Paisas Only

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Electrical motor driven Booster pump of moNos.block type capable todeliver 900-LPMat 35 MWC.The pump shallbecoupled

to TEFC motor of suitable Hpwithspeed of 2900RPM and complete set shall mounted on common base frame.Thequoted Rupees One Lacs Nine Hundred

rate shall includes providing & fixing of RCC foundation (asrecommendedbymanufacturer) and Foundation bolts. (model Fourteen and Twenty Paisas Only

C.I. Butterfly Valve Lever Operated Wafer Type - 150mm, of PN 1.6 rating as per IS:13095 of following dia including Rupees Eleven Thousand Seven

288 3.00 necessary fittings like Companion flanges,nut ,bolt & gaskets etc. 11735.09 Hundred Thirty Five and Nine Paisas Nos. ₹

C.I. Dual Plate 150mm dia Wafer Type Check Valve following dia including necessary fittings like Companion flanges,nut Rupees Fifteen Thousand Two

289 1.00 ,bolt & gaskets etc. 15245.71 Hundred Forty Five and Seventy One Nos. ₹

100mm dia Pressure gauge of suitable range(0-16Kg/cm^2) complete for isolation and fittings such as unions / elbows / Rupees One Thousand Six

290 1.00 reducers etc. 1696.39 Hundred Ninety Six and Thirty Nine Nos. ₹

Pressure switches (IPS -100) of suitable range complete for isolation and fittings such as unions / elbows / reducers etc. Rupees Four Thousand Three

291 1.00 4370.88 Hundred Seventy and Eighty Eight Nos. ₹

Terrace Pump Contrlol MCC Panel with all necessary wiring work including control instrumentation and wiring etc complete. Rupees Thirty Eight Thousand Eight

292 1.00 38832.92 Hundred Thirty Two and Ninety Two Nos. ₹

Providing & Fixing of Wall Mounted (with brackets) portable MoNos. Ammonium Phophate Dry Chemical powder based

fire extinguisher 6 Kg with 90% concentration confirming to IS 14609:1999, consisting of deep drawn, mig Co2 welded M.S

Cylinderical body seemless area Nos.t less than 70% of the cylinder, Internal coating-epoxy powder & external coating-

epoxy polyester powder. Embossed with serial number and date of manufaturing on the body of the cylinder, valve

Construction: Forging & Machining, controlable discharge mechanism with magnetic pressure gauge, vessel checked for Rupees Fifteen Thousand Eight

tensile strength up to 35 kgf/cm2, Hydrostatic pressure tested, extinguishers pressurized using high grade Dry Nitrogen as Hundred Thirty Four Only

per IS 1747 standard. Extinguisher tested must be in house helium leak detection tested & certified , extinguisher

performance tested by NABL accredited Lab, MSDS of the Extinguishing agent is a must, current and valid BIS certification

15683: 2006, EN approved and CE marked, EN:ISO:9001 & ISO:10002 certified, Manufacturer warranty 5 years.

Providing & Fixing of Wall Mounted Squeeze grip type Carbon Dioxide stored pressure portable fire extinguisher 4.5 kg

consisting of Alluminium body cylinder with used/unused gauge, Vessel should be made out of Seamless Aluminum Alloy

6061 Quenched and Tempered, Cylinder Construction : Cold Impact Extrusion,Valve Construction : Forging & Machining.

Rupees Twenty Seven Thousand

The Composition of alloy as specified in ISO 7866:1999.The Product should be EN Approved. Discharge Valve - IS

294 12.00 27986.40 Nine Hundred Eighty Six and Forty Nos. ₹

Filling ratio does Nos.t exceed 0.667 of the water capacity of each cylinder by weight. Vessel approved by PESO and

Hydrostatic Pressure Tested. Manufacture must have license to refill and store compressed gas in cylinders as per Gas

Cylinder rules 2004. EN: ISO:9001, ISO:10002:2004 certified, Manufacturer Warranty 03 years.

Compressed Air Foam System (CAFS) Low pressure Water Mist -50 Liter (Trolley Mounted)- Fire Class & Fire Rating- 27A,

233 B with standard AFFF foam, 35 KV with ERDA certification, Extinguishing enhancement Agent- Standard AFFF Foam 6% -

UL-162 Certified, Compressed Air Cylinder-6 Liters- 300 bar Steel Cylinder mounted on a universal cylinder holder, Media

Volume-50 Liters, Working pressure: Up to maximum 15 bars, Pressure Vessel: Stainless Steel Vessel, Length of Hose: 5 Rupees Three Lacs Sixty Five

295 2.00 Meter, Weight of fully charged system 105 kg Maximum, Extinguishing Gun-stainless steel of weight- less than 2 kg, Lancing 365976.00 Thousand Nine Hundred Seventy Six Nos. ₹

Distance of Gun: 15 Meter & above, Tolerance- Minus 10% + Nos. Limit. Functional temperature range: +5 degrees C to +60 Only

degrees C. Extinguishing media flow: 0.42 to 0.50 L/sec. Operating Time:100 Seconds or more, DIN EN 1866-1:2007-10

Product performance and Fire Ratings tested from NABL Accredited Lab. Manufacturer Warranty One year.

Providing & Fixing of Wall Mounted (with brackets) portable MoNos. Ammonium Phophate Dry Chemical powder based

fire extinguisher 2 Kg with 90% concentration confirming to IS 14609:1999, consisting of deep drawn, mig Co2 welded M.S

Cylinderical body seemless area Nos.t less than 70% of the cylinder, Internal coating-epoxy powder & external coating-

epoxy polyester powder. Embossed with serial number and date of manufaturing on the body of the cylinder, valve

Construction: Forging & Machining, controlable discharge mechanism with magnetic pressure gauge, vessel checked for Rupees Eighteen Thousand Forty

tensile strength up to 35 kgf/cm2, Hydrostatic pressure tested, extinguishers pressurized using high grade Dry Nitrogen as Eight Only

per IS 1747 standard. Extinguisher tested must be in house helium leak detection tested & certified , extinguisher

performance tested by NABL accredited Lab, MSDS of the Extinguishing agent is a must, current and valid BIS certification

15683: 2006, EN approved and CE marked, EN:ISO:9001 & ISO:10002 certified, Manufacturer warranty 5 years.

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Providing & fixing of Ceiling Mounted MoNos. Ammonium Phophate Dry Chemical powder based Automatic fire

extinguisher 10 Kg with Pressure Gauge (applicable on class A,B,C,ESF ) with 90% concentration confirming to IS

14609:1999, Internal coating-epoxy powder & external coating- epoxy polyester powder. Extinguishers pressurized using

Rupees Forty Eight Thousand One

297 8.00 high grade Dry Nitrogen as per IS 1747 standard. Auto discharge mechanism on temperature Rise for Room Temp of 68 C 48128.00 Nos. ₹

Hundred Twenty Eight Only

having inbuilt Glass vial filled with di ethalyle glychol Extinguisher tested must be in house helium leak detection tested &

certified , MSDS of the Extinguishing agent is a must, EN approved and CE marked, EN:ISO:9001, ISO:10002 & OHSAS:18001

certified. Manufacturer warranty 5 years.

Providing & fixing of Wall Mounted Clean Agent HFC-236fa portable Fire Extinguishers. 4 Kg The Clean Agent gas must have

Zero Ozone Depletion Potential. The supplier Authorization from OEM for using Clean Agent (HFC-236fa) in Portable Fire

Extinguisher is must. The Clean Agent (HFC-236fa) should be listed under EPA’s SNAP program, Underwriters Laboratories

and NFPA 2001. Fire extinguisher consisting of deep drawn, mig Co2 welded M.S Cylendrical body seemless area Nos.t less

than 70% of the cylinder,Internal & external cylender coating epoxy powder coating & epoxy polyester powder coating.

Embossed serial number and date of manufaturing, valve Construction: Forging & Machining, controlable discharge Rupees Sixty Four Thousand Five

macanism with pressure gauge, vessel checked for tensile strength up to 35 kgf/cm2, Hydrostatic pressure tested, Hundred Ten Only

extinguishers pressurized using high grade Dry Nitrogen as per IS 1747 standard. In-house Helium Leak Detection Tested &

certified, Extinguisher performance tested by NABL accredited Lab, MSDS of the extinguishing agent is a must, current and

valid BIS certification 15683: 2006, EN approved and CE marked. certified EN:ISO:9001, ISO:10002:2004 certified,

Manufacturer warranty 5 years.

4 Kg Fire Extinguisher Monnex Powder, Stored Pressure Type, Pressure Gauge, Gross Weight 7.4 Kg, Empty Weight

Kg,Can Height 480MM, Diameter 160MM, Discharge time Nos.t less than 13 Secs, Controllable discharge mechanism, Range

minimum4 Meters, Applicable on Class A,B and electrically started Fire, Very effective on Class B&C Fire, B Rating 189B, Can Rupees Thirty Three Thousand Six

Construction : Deep drawn Co2 & Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Hundred Ten and Twenty Paisas Only

Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, CE Approved,

Years Warranty.

Providing & Fixing in place An elegant looking, slim, surface ceiling mounting Type, multi LED which provides illumination on

Nos.rmal mains power supply and the same lamp continues to provide illumination during mains failure on self contained Rupees Five Thousand Five

300 28.00 battery source. ON resumption of mains supply, the lamp switches back to the mains automatically & simultaneously starts 5575.20 Hundred Seventy Five and Twenty Nos. ₹

recharging the battery to the required level. Maintained models provide uninterrupted illumination. as per the designed Paisas Only

given by EIC.) Fascia : E

Providing & Fixing in place Automatically switches – ON, on mains power failure & provides illumination on battery source

for specified duration, after which the battery gets automatically cut-off, to facilitate quick recharge on the resumption of Rupees Five Thousand Ninety and

mains supply. Once the battery is fully charged, it automatically slides into trickle charge to constantly retain the charge and Forty Paisas Only

be ready for immediate use. as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and Rupees Four Thousand Four

-20 to 80°c temp. resistant as per the desgned given by EIC. Hundred Fifty and Six Paisas Only

EVACUTION PLAN - A3 PEPER SIZE

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and Rupees Six Hundred Twenty One

-20 to 80°c temp. resistant as per the desgned given by EIC. and Fifteen Paisas Only

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and Rupees Four Hundred Sixty Four

-20 to 80°c temp. resistant as per the desgned given by EIC. and Sixty Paisas Only

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Four Hundred Sixty Four

305 12.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 464.60 Nos. ₹

and Sixty Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place Automatically switches – ON, on mains power failure & provides illumination on battery source

for specified duration, after which the battery gets automatically cut-off, to facilitate quick recharge on the resumption of Rupees Seven Thousand Twenty

mains supply. Once the battery is fully charged, it automatically slides into trickle charge to constantly retain the charge and Nine and Sixty Paisas Only

be ready for immediate use.as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Four Hundred Sixty Four

307 5.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 464.60 Nos. ₹

and Sixty Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Four Hundred Sixty Four

308 5.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 464.60 Nos. ₹

and Sixty Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Seven Hundred Seventy Six

309 5.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 776.69 Nos. ₹

and Sixty Nine Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Seven Hundred Seventy

310 5.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 775.68 Nos. ₹

Five and Sixty Eight Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Seven Hundred Seventy

311 5.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 775.68 Nos. ₹

Five and Sixty Eight Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Four Hundred Sixty Four

312 24.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 464.60 Nos. ₹

and Sixty Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Four Hundred Sixty Four

313 12.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 464.60 Nos. ₹

and Sixty Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Six Hundred Twenty and

314 12.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 620.14 Nos. ₹

Fourteen Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Four Hundred Sixty Four

315 5.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 464.60 Nos. ₹

and Sixty Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Seven Hundred Seventy

316 12.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 775.68 Nos. ₹

Five and Sixty Eight Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Four Hundred Sixty Four

317 5.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 464.60 Nos. ₹

and Sixty Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious Rupees Five Thousand Five

318 12.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 5584.29 Hundred Eighty Four and Twenty Nos. ₹

-20 to 80°c temp. resistant as per the desgned given by EIC. Nine Paisas Only

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Six Hundred Twenty One

319 24.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 621.15 Nos. ₹

and Fifteen Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing & Fixing in place of 1mm thick regid photoluminescent based glow in dark regid sheet with highintensity luminious

Rupees Six Hundred Twenty One

320 100.00 properties enclosed in a transparent weather proof UV stabilize coated sheet. With UV screen printing by imported inks and 621.15 Nos. ₹

and Fifteen Paisas Only

-20 to 80°c temp. resistant as per the desgned given by EIC.

Providing,Fabricating & Fixing steel signage's using SS 304 grade stainless steel 1.00mm thick plate Fixed on wall, beams or Rupees One Thousand Two

any surface. Lattering carried out of size 300mm height. Hundred Seventy Seven and Sixty

Providing,Fabricating & Fixing steel signage's using SS 304 grade stainless steel 2.00mm thick plate Fixed on wall, beams or Rupees Two Thousand One

any surface. Lattering carried out of size 1inch to 3inch height. Hundred Ninety One and Seventy

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS

PVC insulated multi strand copper wires up to 10 RMT length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting

Rupees Five Hundred Eighty Two

323 955.00 base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, 582.77 Nos. ₹

and Seventy Seven Paisas Only

with necessary Lamp holder/ceiling rose / H.D.Connector as directed..(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete. cat III.

Point wiring for TissiNos. / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box

Rupees Two Hundred and Ninety

324 545.00 covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / 200.99 Nos. ₹

Nine Paisas Only

ceiling rose / H.D.Connector as directed.

Nos.te:- Maximum up to 6 RMTs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV Grade FRLS PVC

insulated multi strand copper wires up to 10 RMT length, in below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected

on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules Rupees Eight Hundred Nine and

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. One Paisas Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III.

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting

Rupees Three Hundred Nine and

326 441.00 base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type 309.06 Nos. ₹

Six Paisas Only

accessories -5A socket outlet with 5A switch. cat III.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS PVC

insulated multi strand copper wires up to 10 RMT length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / Rupees Six Hundred Twelve and

ceiling as per pipe erected with following type of accessories. Six Paisas Only

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS PVC

insulated multi strand copper wires up to 10 RMT length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / Rupees Eight Hundred Ninety Four

ceiling as per pipe erected with following type of accessories. and Eighty Six Paisas Only

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III.

Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erected

on PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as directed Rupees One Thousand One

329 232.00 1 Nos. 6A/16A universal plug-switch combined. 1133.22 Hundred Thirty Three and Twenty Nos. ₹

4 Nos. 6A Switch Two Paisas Only

4 Nos. 6A 5 pin Plug [B] For Modular Type Accessories. cat III.

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered

Rupees One Hundred Sixty and

330 6.00 with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge. (4) TV 160.59 Nos. ₹

Fifty Nine Paisas Only

Co-axial Socket outlet . . cat III.

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered

with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge. (8) Rupees One Hundred Sixty and

Modem Jack for Computer Open RJ-45. cat III. Fifty Nine Paisas Only

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features

Rupees Thirty One Thousand Nine

L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface

332 18.00 31996.80 Hundred Ninety Six and Eighty Ea. ₹

193 W PoE budget [Approved by Competent Authority i.e. Nos.t Below the rank of Executive Engineer ]

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction Rupees Forty Seven and Forty

[C] CAT - 6. Seven Paisas Only

Providing & Erecting Netwrok rack with following capacity with Necessary cooling fan,Cable manager,6A PDU,equipment

Rupees Thirteen Thousand Six

334 6.00 rack with necessary mounting accessories. 13635.00 Ea. ₹

Hundred Thirty Five Only

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered

with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge

Rupees One Hundred Sixty and

335 113.00 (3) Two Pin/RJ-11 Telephone Socket 160.59 Nos. ₹

Fifty Nine Paisas Only

[A] For One Gang. cat III.

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors & Nos.of pairs. With necessary connections.

Rupees Twenty and Twenty Paisas

336 3500.00 [A] Conductor Size 0.5 mm 20.20 RMT ₹

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors & Nos.of pairs. With necessary connections.

Rupees Four Hundred Sixty Seven

337 157.00 [A] Conductor Size 0.5 mm 467.63 RMT ₹

and Sixty Three Paisas Only

(b) Armoured [Jelly Filled]

Providing & erecting main Distribution (MDF) indoor type, back mounted frame. Rupees One Thousand Seven

(c) Suitable for 50 pair. Hundred Forty Seven and Thirty

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Rupees Twenty Four and Twenty

approved manner as directed Four Paisas Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Rupees Thirty Three and Thirty

approved manner as directed Three Paisas Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Rupees Fifty Four and Fifty Four

approved manner as directed Paisas Only

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat

Rupees One Thousand One

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel,

342 174.00 1149.38 Hundred Forty Nine and Thirty Eight RMT ₹

relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.(l)

One wire 95.00 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Rupees One Hundred Four and

colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm. Three Paisas Only

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Rupees One Hundred Forty and

continuity of following size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm. Thirty Nine Paisas Only

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Rupees One Hundred Eighty Four

continuity of following size (a) with medium class Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm. and Eighty Three Paisas Only

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Rupees Five Hundred Thirty Two

colour for earth continuity of following size(A) with medium class Rigid PVC pipe and accessories(i) 4 wire 10 sq. mm (use and Twenty Seven Paisas Only

earth wire of 4 sq.mm )

Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with double ball bearing ISI mark with Rupees One Thousand Nine

347 350.00 Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , caNos.py & 30 cm. 1948.29 Hundred Forty Eight and Twenty Nos. ₹

down rod erected with earthing.(Make shall be approved by Engineer in charge)) Nine Paisas Only

Supplying and erecting 19 / 20 mm. Nos.minal bore Medium Class M.S. Pipe down rod erected duly painted for fan Rupees One Hundred Eight and

complete with proper insulation without leakage and earthing. Seven Paisas Only

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and

Rupees One Hundred Eight and

349 350.00 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. 108.07 Nos. ₹

Seven Paisas Only

Supplying & erecting approved make low Nos.ise decorative exhaust fan having square frame ABS body with inbuilt lowers Rupees One Thousand Three

& square frame.200mm with 1350RPM Cat.II Hundred Sixty Six and Fifty Three

Supplying and erecting approved make oscillating type bracket fan A.C. 230V. 50 Hz 400/450 mm sweep wall mounted with Rupees Two Thousand Five

351 24.00 height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as 2534.09 Hundred Thirty Four and Nine Nos. ₹

directed. Paisas Only

Decorative call bell Ting-tong box type 250 volts complete erected Rupees Seventy One and Seventy

One Paisas Only

Quantities Estimate Rates (SOR 2024-25)

Item Estimated But

Item of Works Unit to Estimated

Nos. may Be More In Figures

In Words Quantites

Or Less Rs.Ps. Rs.Ps.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having

Rupees One Hundred Twenty

353 1493.00 breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark cat III. 123.22 Nos. ₹

Three and Twenty Two Paisas Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity &

Rupees Three Hundred Twenty

354 60.00 confirms to IS : 8828 in existing box having following capacity 329.26 Nos. ₹

Nine and Twenty Six Paisas Only

(A) 6 to 32 Amp. cat III.

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity &

Rupees Three Hundred Sixty Two

355 18.00 confirms to IS : 8828 in existing box having following capacity 362.59 Nos. ₹

and Fifty Nine Paisas Only

(B) 40 Amp. cat III.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms

Rupees Six Hundred Fifty Five and