Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹12.1 L
EMD Value
₹24,168
Closing Date
27 Oct 2026, 2:00 pm5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE CDOD
Office of the Executive Engineer Calcutta Drainage Outfall Division Postal address- Jalasampad Bhawan (6th) Floor, Salt Lake, Kol-91
Emergent Repair to the Wooden Bridge at Kantatala over SWF Channel under C.D.O Sub-Division II of C.D.O Division in P.S- K.L.C., Block- Bhangore-I, Dist. - South 24 parganas
2026_IWD_5079519_1
WBIW/EE/CDOD/e-SNIT- 08/2026-27
Open Tender
CIVIL WORKS
Percentage
30 days
Block- Bhangore-I
Please refer Tender documents.
6 documents required · 6 mandatory
₹24,168
Yes
13 Oct 2026
13 Oct 2026
27 Oct 2026
13 Oct 2026
27 Oct 2026
13 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed. Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end i) 20 cm. av. Dia.. | 286 | Metre | 363.5 | ₹1,03,961 |
| 1.01 | ii) 15cm. Av. Dia | 655.25 | Metre | 258.62 | ₹1,69,460.76 |
| 2 | Labour for driving Jhaw / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads beforeand after driving and including hire and labour for necessary driving appliances and all tackles. i) 20 cm diameter | 135 | Metre | 141.82 | ₹19,145.7 |
| 2.01 | ii) 15 cm diameter | 219 | Metre | 125.14 | ₹27,405.66 |
| 3 | Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. (a) Width of thinner end above 15 cm. (i) Jhaw / Eucalyptus. | 167.4 | Metre | 228.83 | ₹38,306.14 |
| 4 | Splicing (as per drawing and direction of the Engineer-in-charge) in position 150 mm. to 250 mm. dia. of individual bullah with 2 Nos. 1250 mm. x 75 mm. x 10 mm. M.S. flat and 4 Nos. half rings made of (700 x 75 x 6) mm. M.S. flat fitted and fixed with 4 Nos. 12 mm. dia.bolts with nuts and washers. Flat bars are to be fitted and fixed with 3 Nos. 20 mm. dia. through bolts with nuts and washers including cost of supply and carriage of all materials, making necessary scaffolding, stagging etc. drilling holes complete (splicing is to be done on position after the bottom bullah is driven as per necessity). Length of lap of bullah should be provided as five times the diameter of bullah or 90 cm. whichever is greater. | 26 | Each | 3,260.76 | ₹84,779.76 |
| 5 | Best Seasoned wood work in shutters, posts, plates, rafters, battens, trusses, beams, purlins, bargas, wheel-guards, running boards, frames etc. including supplying at site, handling, hoisting, fitting & fixing in position excluding the cost of bolt and nuts only but including the cost of nails and screws with cost and carriage of all materials complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels) (b) Hard Wood (Mahua / Arjun / Tentul etc or similar quality hard wood as approved by the Engineer-in-charge) | 8.85 | Cum | 58,516.19 | ₹5,17,721.99 |
| 6 | Labour charges for taking out old wood work including cutting bolts and nuts and stacking within a lead of 100 metre etc. complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels) | 5.89 | Cum | 3,247.66 | ₹19,113.78 |
| 7 | Labour charges for old or new wood work including hoisting, fitting & fixing including supplying new nails and screws wherever necessary etc. complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels) | 0.96 | Cum | 7,658.51 | ₹7,363.66 |
| 8 | Supplying at site and fitting & fixing Mild Steel long nuts & bolts etc. complete as per the direction of the Engineer-in-charge. | 368.04 | Kg | 90.58 | ₹33,337.33 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.43 MB
WB_2911.pdf
Tender Documents • 0.79 MB
BOQ_5183026.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .