Tender ID

Karnataka

To Be Opened

Works

Buildings

DETAILED SUB ESTIMATE FOR PROVIDING ELECTRIFICATION TO GOVT P U COLLEGE BELTHANGADY AT, D.K. DISTRICT.

Public Works Department

PWD Division Office Mangaluru | Dakshina Kannada, Karnataka

Amount: ₹11.3 LCloses: 27 Feb 2026Closed

Timeline

Published13 Feb 2026
Closed27 Feb 2026
Bid Opening2 Mar 2026

Tender Value

₹11.3 L

EMD Value

₹28,200

Closing Date

27 Feb 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Work Description

DETAILED SUB ESTIMATE FOR PROVIDING ELECTRIFICATION TO GOVT P U COLLEGE BELTHANGADY AT, D.K. DISTRICT.

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT32046

Reference Number

PWD/2025-26/BD/WORK_INDENT32046

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mangaluru

Source Website

Subscribe to view

Documents Required

3 documents required · 3 mandatory

Technical Bid

RequiredLast Five years Profit & loss statement Certificate countersigned from Chartered Accountant.

RequiredCLI - Chief Inspectorate of Electrical

RequiredExisting & Ongoing Commitment Statement

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The employer reserves the rights to reject one or all tenders without assigning any reason.

The employer is not responsible for any delay in accessing E- procurement portal.

Contractors should be registered with KPWD Class - IV and above Registration and the tenderer should submit the Registration Certificate along with technical bid.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the original documents before approval.

Contractors should follow strictly prevailing rules of labour act.

The Item rates quoted shall include cost of Royalty charges on construction materials and other taxes as per rates provided in prevailing Govt orders at the time of execution and including cost and conveyance of all materials curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as directed by the Engineer-in-charge of the work.

All materials required for this work shall be procured by the bidder himself and should be got tested by the quality control authorities at his own cost before use on the work. Department will not supply any materials.

Materials like bitumen, steel and cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the Quality Assurance Authority before commencement of the work.

All documents should be uploaded by the contractor is to be attested by the authorized notary or not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when sought for .Failure to produce original documents leads to rejection of Tender.

Units, Rates and Prices shall be quoted by the tender in Indian Rupees only

The defective liability period period i.e up to 1 year

Payment of EMD of Rs. 28,200.00 shall be through E payment

The successful bidder has to follow the prevailing Government orders regarding Royalty Charges. The Contractor has to submit MDP Certificate along with the running contractor bills. Otherwise Department will take necessary action as per the Government Orders/Circulars.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incidents happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Technical Criteria

General

Banker Details

Capabilities of Vendor

CLI -Chief Inspectorate of Electrical

Others -- CLI - Chief Inspectorate of Electrical

List of existing commitments and ongoing work

Others -- Existing & Ongoing Commitment Statement

Assessed available tender capacity: (AxNx2.5-B), where A is the maximum value of civil engineering works executed in any one year during the last five years (updated to current financial year price level) (FY in which tenders are invited), taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at the current financial year (FY in which tenders are invited) price level, of existing commitments and on-going works to be completed during the next 03 months. (Period of completion of the works for which tenders are invited)

Others -- Assessed available tender capacity

Financial Status

Attach the last five years profit & loss statement certificate countersigned from a chartered accountant with UDIN Number is to be submitted.(2020-21 to 2024-25)

Others -- Attach the last five years profit & loss statement certificate countersigned from a chartered accountant with UDIN Number as to be submitted.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹28,200

Important Dates

Last Activity

13 Feb 2026

Published

13 Feb 2026

Bid Opening

2 Mar 2026

Download Ends

26 Feb 2026

BOQ Preview

•

DETAILED SUB ESTIMATE FOR PROVIDING ELECTRIFICATION TO GOVT P U COLLEGE BELTHANGADY AT, D.K. DISTRICT.

•

1.10 Manual Means -

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea... 30.00 m³

•

11.3.7 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin... 5.00 m

•

1.6.1 Manual Means -

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ... 30.00 m

•

Vol-6, Part - III , Utilization, I No. 1.2.1 Concealed Conduit System . Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and r... 840.00 m

•

Vol-6, Part - III , Utilization, I No. 1.2.2 Concealed Conduit System . Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and r... 450.00 m

•

Vol-6, Part - III , Utilization, I No. 1.1.1 Open Conduit System- Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using invert... 180.00 m

•

Vol-6, Part - III , Utilization, I No. 1.1.2 Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case... 140.00 m

•

Vol-6, Part - III , Utilization, I No.1.3.1 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J ho... 540.00 m

•

Vol-6, Part - III , Utilization, I No. 1.3.2 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J ho... 295.00 m

•

Vol-6, Part - III , Utilization, I No. 1.5.1 Supplying and fixing PVC/metal conduit Deep junction box. 19/20 mm deep Junction box ( COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD Electrical), I No. 1.5.1) ---- including cost and ... 181.00 Each

•

Vol-6, Part - III , Utilization, I No. 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box. 25 mm deep Junction box ( COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD Electrical), I No. 1.5.2) ---- including cost and con... 130.00 Each

•

Vol-6, Part - III , Utilization, I No. 1.12 Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14 mm M.S. rod. ( COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD Electrical), I No. 1.12) ---- including cost and ... 54.00 No

•

Vol-6, Part - III , Utilization, I No. 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre... 12.00 Each

•

Vol-6, Part - III , Utilization, I No. 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre... 5.00 Each

•

Vol-6, Part - III , Utilization, I No. 5.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit bre... 2.00 Each

•

Vol-6, Part - III , Utilization, I No. 5.19.7 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single ph... 7.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 24.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 54.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 66.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 40.00 Each

•

Vol-6, Part - III , Utilization, I No. 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 67.00 Point

•

Vol-6, Part - III , Utilization, I No. 2.2.2 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 74.00 Point

•

Vol-6, Part - III , Utilization, I No. 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 81.00 Point

•

Vol-6, Part - III , Utilization, I No.2.2.4 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi... 14.00 Point

•

Vol-6, Part - III , Utilization, I No. 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I... 1800.00 m

•

Vol-6, Part - III , Utilization, I No. 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I... 2000.00 m

•

Vol-6, Part - III , Utilization, I No. 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I... 770.00 m

•

Vol-6, Part - III , Utilization, I No. 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 24.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 54.00 Each

•

Vol-6, Part - III , Utilization, I No.3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 66.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 40.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PW... 380.00 Each

•

Vol-6, Part - III , Utilization, I No.3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PW... 8.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( ... 80.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module (COMMON SR Vol-6 of 2023-24, Part - III , U... 10.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD El... 38.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket (COMMON SR Vol-6 of 2023-24, Part - III , Utilization... 38.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TV/Telephone Socket (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( P... 20.00 Each

•

Vol-6, Part - III , Utilization, I No. 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ... 32.00 Each

•

Vol-6, Part - III , Utilization, I No.11.3.2 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power I... 62.00 Each

•

Vol-6, Part - III , Utilization, I No. 11.5.3 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewi... 23.00 Each

•

Vol-6, Part - III , Utilization, I No. 11.8.4 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ... 3.00 Each

•

Vol-6, Part - III , Utilization, I No. 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball ... 10.00 Each

•

Vol-6, Part - III , Utilization, I No. 6.1 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.(COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( ... 3.00 Each

•

Vol-6, Part - III , Utilization, I No. 13.2.1 Supplying and Fixing........mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL... 3.00 Each

•

Vol-6, Part - III , Utilization, I No. 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires,... 85.00 Each

•

Vol-6, Part - III , Utilization, I No. 13.11 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt... 10.00 Each

•

Vol-6, Part - III , Utilization, I No. 13.12 Extra length of GI pipe of class B 19mm dia for down rod. (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD Electrical), I No. 13.12) ---- including cost and conveyance of all materials all ... 6.00 m

•

Vol-6, Part - III , Utilization, I No. 13.14 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.(COMMON SR Vol-6 of 202... 3.00 Each

•

Vol-6, Part - III , Utilization, I No. 5.42.2 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front... 25000.00 Sq CM

•

Vol-6, Part - III , Utilization, I No. 5.40.1 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insula... 2.00 m

•

Vol-6, Part - III , Utilization, I No. 5.41.2 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint... 2.00 m

•

Vol-6, Part - III , Utilization, I No.5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT ... 1.00 Each

•

Vol-6, Part - III , Utilization, I No. 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O... 1.00 Each

•

Vol-6, Part - III , Utilization, I No. 5.20.1 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole (COMMON SR Vol-6 of 2023-24, Part - III , Utilizat... 4.00 Each

•

Vol-6, Part - III , Utilization, I No.5.12.2 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A (COMMON SR Vol-6 of 2023-24, Pa... 1.00 Each

•

Vol-6, Part - III , Utilization, I No.5.7.4 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 100 A (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD Elect... 6.00 Each

•

Vol-6, Part - III , Utilization, I No. 5.35 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.(COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD E... 1.00 Each

•

Vol-6, Part - III , Utilization, I No. 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.(COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD Electrica... 3.00 Each

•

Vol-6, Part - III , Utilization, I No. 12.2.1 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote, Ding Dong Bell (COMMON SR Vol-6 of 2023-2... 3.00 Each

•

Vol-6, Part - III , Utilization, I No. 32.13 Supplying of 1.1 KV ,XLPE or Heat reisistant PVC insulated , PVC extrusted inner seath Armored , LTUG Cable as per IS-1554 ( Part-1) or IS-7098 Part-1 , Armouring strip thickness and resistively as pe... 0.08 Km

•

Vol-6, (11 kV System), I.no. 21.06 Laying of cable in existing Trench / GI Pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminium Rollers as directed by the departmental staff- LT Cable, 35 to 95 Sqmm (Common SR Vol-6 of 2023-24 (11 kV S... 0.08 Km

•

Vol-6, (11 kV System), I.no. 63.03 Supplying of Brass Cable Gland 40 mm .(Common SR Vol-6 of 2023-24 (11 kV System), I.no. 63.03) ---- including cost and conveyance of all materials all lead and lift, loading and unloading, hire charg... 4.00 No

•

Vol-6, (11 kV System), I.no. 59.02 Supplying of Haevy Duty Copper Terminal Long Barrel,… 35 Sqmm Copper Terminal Apprx Wt: 17 Gm (Common SR Vol-6 of 2023-24 (11 kV System), I.no. 59.02) ---- including cost and conveyance of all mate... 4.00 No

•

Vol-6, (11 kV System), I.no. 59.04 Supplying of Haevy Duty Copper Terminal Long Barrel,… 70 Sqmm Copper Terminal Apprx Wt: 28 Gm (Common SR Vol-6 of 2023-24 (11 kV System), I.no. 59.04) ---- including cost and conveyance of all mat... 6.00 No

•

Vol-6, Part - III , Utilization, I No. 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul... 5.00 No

•

Vol-6, Part - III , Utilization, I No.12.58.2 GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD Electrical), I No. 12.58.2) ---... 22.00 m

•

Vol-6, Part - III , Utilization, I No. 12.58.3 GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI strip (COMMON SR Vol-6 of 2023-24, Part - III , Utilization ( PWD Electrical), I No. 12.58.3) --... 34.00 m

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

bid_document_kw-1-32046.doc

Tender Document • 1.16 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

To Be Opened

Works

Buildings

DETAILED SUB ESTIMATE FOR PROVIDING ELECTRIFICATION TO GOVT P U COLLEGE BELTHANGADY AT, D.K. DISTRICT.

Public Works Department

PWD Division Office Mangaluru | Dakshina Kannada, Karnataka

Amount: ₹11.3 LCloses: 27 Feb 2026Closed

Timeline

Published13 Feb 2026
Closed27 Feb 2026
Bid Opening2 Mar 2026