Construction of Bath room Near Markazi Jamia Masjid ABU-BAKR at MS MIR Block Zaingeer Under CDF (Honble MLA Sopore) FY 2025-26

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: including dewatering if any

Providing and laying of stone soiling (hand packed )including dressing ramming ,watering and all leads lifts and carriage upto site of work complete (including dewatering if any)

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:3:6mix (1 Cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) crushed stone aggregates including dewatering if any and head load

Centering and shuttering including strutting, propping etc. and removal of form for;-Suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of form for;-Foundations, footings, bases of columns etc. for mass concrete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level Mild steel and medium tensile steel bars.

12mm Cement plaster on the rough side of single or half brick wall ofmix1:6mix ( 1 cement : 6 fine sand )

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing MS sheet of 1mm thick for doors, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on cement bed in 1:4 mix including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 mm x 600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

PP-R PIPES FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-with clamps at 1.00 meter spacing PN-16 pipe, 20mm

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-with clamps at 1.00 meter spacing PN-16 pipe, 16mm

P/F plain bend 75mm dia pvc of approved make type B

P/F p 75mm dia pvc collar of approved make type B

P/F 75mm Sewage pipes of ciass B type of approved brand

P/F PVC cowel over vent pipe of approved quality type B

P/F door bend 75mm PVC complete job

P/F floor traps of self cleansing complete job

P/F of CP bib cock of 15 mm dia of standard brand and quality

P/F 100 mm Sewage pipes of ciass B type of approved brand

P/F of 100mm dia PVC door tee

P/F of 100mm dia PVC plain bend

P/F 100x75 reducer PVC of approved quality

P & fixing W C Squatting Pan ( indian type) W c Pan with 100 mm dia PVC " P" trap +10 litre low level PVC flushing cistern including flush pipe, manully controlled device with all fittings & fixture Complete Long pattern W.C Pan

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, con colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings (Water storage tank)

Carriage of material by mechanical transport Bricks from Budgam for avg lead 70 km upto site of work

Sand agg lead (10Km)

stone agg lead (15Km)

Providing CIB and during execution & post execution photographs complete job