Loading…
Loading…
Tender Value
₹55.3 L
EMD Value
₹55,300
Closing Date
27 Aug 2026, 6:00 pmDue today
Chief officer Nagarpalika Tharad
Construction of Additional Second Floor over Existing Nagar Seva Sadan Building at Tharad, Dist. Vav -Tharad Grant: - SJMMSVY-UDP-88- 2026-27
334696
Tender Notice 2026-27
Open
Civil - All
Works
Banaskantha
3 documents required · 3 mandatory
₹2,832
Chief officer Nagarpalika Tharad
₹55,300
12 Aug 2026
12 Aug 2026
12 Aug 2026
27 Aug 2026
12 Aug 2026
No. But may be estimated
more or less quantities
In Figure in Words
A Building
1.0 19.00 Demolition of Brick work and stone masonry including stacking of serviceable 122.94 Rupees One Hundred TwentyTwo Cu.M
materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Paise NinetyFour Only
2.0 6.70 Demolition including stacking of serviceable materilas and disposal of 136.30 Rupees One Hundred ThirtySix Cu.M
unserviceable materials with all lead and lift. (i) R.C.C. work. Paise Thirty Only
3.0 2.00 Brick work using common burnt clay building bricks having crushing strength not 4538.16 Rupees Four Thousand Five Cu.M
less than 35 kg./Sq.Cm. in Super structure above plint level up to two level in Hundred ThirtyEight Paise Sixteen
Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional @ First Floor Only
4.0 33.10 Brick work using common burnt clay building bricks having crushing strength not 4580.91 Rupees Four Thousand Five Cu.M
less than 35 kg./Sq.Cm. in Super structure above plint level up to two level in Hundred Eighty Paise NinetyOne
Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional @ Second Floor Only
5.0 19.80 Brick work using common burnt clay building bricks having crushing strength not 4580.91 Rupees Four Thousand Five Cu.M
less than 35 kg./Sq.Cm. in Super structure above plint level up to two level in Hundred Eighty Paise NinetyOne
Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional @ Third Floor Only
6.0 0.00 Half brick masonry in common brunt clay building bricks having crushing strength 750.76 Rupees Seven Hundred Fifty Paise Sq.Mt
not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) SeventySix Only
with 2 Nos of 6mm Mild steel round bars after every three course embedded in
Cement Mortar in super structure above plinth level @ First Floor Level
7.0 39.90 Half brick masonry in common brunt clay building bricks having crushing strength 805.19 Rupees Eight Hundred Five Paise Cu.M
not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) Nineteen Only
with 2 Nos of 6mm Mild steel round bars after every three course embedded in
Cement Mortar in super structure above plinth level @ Second Floor Level
8.0 13.50 Providing and laying controlled cement concrete M-200 and curing complete 10961.59 Rupees Ten Thousand Nine Cu.M
including the cost of form work and but exculding the cost of reinforcement for Hundred SixtyOne Paise FiftyNine
reinforced concrete work in : (d) Columns, pillars, posts and struts up to floor two Only
level For Second Floor
9.0 5.80 Providing and laying controlled cement concrete M-200 and curing 11001.52 Rupees Eleven Thousand One Paise Cu.M
complete including the cost of form work and but exculding the cost of FiftyTwo Only
reinforcement for reinforced concrete work in : (d) Columns, pillars, posts
and struts up to floor two level For Third Floor
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
10.0 19.90 Providing and laying controlled cement concrete M-200 and curing complete 7676.06 Rupees Seven Thousand Six Cu.M
including the cost of form work and but exculding the cost of reinforcement for Hundred SeventySix Paise Six Only
reinforced concrete work in : (A) Beams @ Second Floor
11.0 3.00 Providing and laying controlled cement concrete M-200 and curing 7715.99 Rupees Seven Thousand Seven Cu.M
complete including the cost of form work and but exculding the cost of Hundred Fifteen Paise NinetyNine
reinforcement for reinforced concrete work in : (A) Beams @ Third Floor Only
12.0 2.00 Providing and laying controlled cement concrete M-200 and curing 5982.83 Rupees Five Thousand Nine Cu.M
complete including the cost of form work and but exculding the cost of Hundred EightyTwo Paise
reinforcement for reinforced concrete work in : (B1) Wall Caps @ Third EightyThree Only
Floor for Parapet
13.0 1.40 Providing and laying controlled cement concrete M-200 and curing complete 8684.04 Rupees Eight Thousand Six Hundred Cu.M
including the cost of form work and but exculding the cost of reinforcement for EightyFour Paise Four Only
reinforced concrete work in : (E1) Lintel @ Second Floor
14.0 2.00 Providing and laying controlled cement concrete M-200 and curing complete 6977.14 Rupees Six Thousand Nine Hundred Cu.M
including the cost of form work and but exculding the cost of reinforcement for SeventySeven Paise Fourteen Only
reinforced concrete work in : (F) Chhajjas Second Floor
15.0 29.00 Providing and laying controlled cement concrete M-200 and curing complete 7337.71 Rupees Seven Thousand Three Cu.M
including the cost of form work and but exculding the cost of reinforcement for Hundred ThirtySeven Paise
reinforced concrete work in : (H1) RCC Slab @ Second Floor SeventyOne Only
16.0 4.00 Providing and laying controlled cement concrete M-200 and curing complete 7377.64 Rupees Seven Thousand Three Cu.M
including the cost of form work and but exculding the cost of reinforcement for Hundred SeventySeven Paise
reinforced concrete work in : (H2) RCC Slab @ Third Floor SixtyFour Only
17.0 3.20 Providing and laying controlled cement concrete M-200 and curing complete 7416.49 Rupees Seven Thousand Four Cu.M
including the cost of form work and but exculding the cost of reinforcement for Hundred Sixteen Paise FourtyNine
reinforced concrete work in : (G1) Staircase @ Second Floor Only
18.0 0.50 Providing and laying controlled cement concrete M-200 and curing complete 8911.29 Rupees Eight Thousand Nine Cu.M
including the cost of form work and but exculding the cost of reinforcement for Hundred Eleven Paise TwentyNine
reinforced concrete work in : (H) Drop Paradi @ Second Floor Only
19.0 10189.00 Providing TMT Bar FE 550D reinforcement for R.C.C. work including bending, 77.29 Rupees SeventySeven Paise K.G
binding and placing in position complete upto floor two level. TwentyNine Only
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
20.0 9.50 Providing and fixing door having side hung double shutter having factory fabricated 2826.99 Rupees Two Thousand Eight Sq.Mt
std. Extruded aluminium colour anodized hollow section {Jindal SEction No. 19552 Hundred TwentySix Paise NinetyNine
for door frame, hollow portion of door frame shall be filled with non teakwood wood} Only
with factory made 35 mm. Thick flush door both side pre laminated with lach lock
as per details colour & pattern approved by this office including necessary C.P.
brass fixtures and fastenings.
21.0 9.20 Providing and fixing door having side hung single shutter having factory fabricated 3391.58 Rupees Three Thousand Three Sq.Mt
std. Extruded aluminium colour anodized hollow section {Jindal SEction No. 19552 Hundred NinetyOne Paise FiftyEight
for door frame, hollow portion of door frame shall be filled with non teakwood wood} Only
with factory made 35 mm. Thick flush door both side pre laminated with lach lock
as per details colour & pattern approved by this office including necessary C.P.
brass fixtures and fastenings.
22.0 27.00 Providing and fixing extruded aluminum window having extruded aluminum Colour 2140.33 Rupees Two Thousand One Sq.Mt
anodized section frame main outer size 127mm x 38.10mm x 1.35mm (of Jindal Hundred Fourty Paise ThirtyThree
Section no:2443,@ Wt.1.384 Kg/mt),horizontal Four track member size 122.20mm Only
x 31.75mm x 1.10mm (of Jindal Section no:8787,@ Wt. 1.205 Kg/mt),vertical
member of size 122.20mm x 31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt.
1.398 Kg/mt) with sliding shutters of orizontal member size 40mm x 18mm x
1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),vertical member of size
40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/Section
8948,@ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float
glass with powder coated aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc complete for window.
23.0 5.90 Providing and fixing window having extruded aluminum Colour anodized section 1713.70 Rupees One Thousand Seven Sq.Mt
frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt Hundred Thirteen Paise Seventy Only
1.094 Kg / Rmt), horizontal two track member size 61.85 mm x 1.75 mm x 1.20mm
(of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size
mm x 31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt) with
sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal
Section no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x
1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.
0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with
powder coated aluminum fittings and fixtures and transparent silicon sealant glass
fixing to frame as per details etc complete for window. Sqm 2471.00 2021.71
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
24.0 2.00 Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 1301.82 Rupees One Thousand Three Sq.Mt
x 1.95 mm(of Jindal Section no:4605, @ Wt 1.094Kg / Rmt with colour anodized Hundred One Paise EightyTwo Only
alluminium frame with 5 mm thick transparent bronze colour tinted float glass with
colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as
details etc complete for.window
25.0 4.80 Providing and fixing FRP frame size 100 x 50 mm and 28 mm thick FRP shutter 2023.03 Rupees Two Thousand TwentyThree Sq.Mt
with depressed panel SHUTTER having extra reinforcement on sides and edges Paise Three Only
and in GEL coat finish. The core of shutter is to be filled up with injected fiber
extinguishing grade polyurethane foam done in situ along with embedded wooden
pieces for stiffening and also for taking hinges and fixtures. The whole FRP frame
and shutter is to be water proof, weatherproof, termite proof and resistance to mild
acid / Alkali resistance including S.S. hinges with necessary screws and aluminum
fixtures and fastening.
26.0 83.20 Providing and fixing aluminum partly paneled / partly glazed & Top Aliuminum 2525.00 Rupees Two Thousand Five Sq.Mt
wiremesh partition and door using 62.50 x 38.50 mm size section frame of 1.00 Kg. Hundred TwentyFive Only
laminated sheet with glazing patti rubber packing & filing hollow portions of frame
with non teakwood filling etc complete as directed by engineer in charge
27.0 850.00 Providing and fixing Safety grills of required pattern for windows / Door using 16mm 112.72 Rupees One Hundred Twelve Paise K.g
dia M.S plished bars and Rectangular CRC pipes of size 50 x 30 x 2mm at required SeventyTwo Only
spacing as per design and hold fasting with coach bolts including one coat of
primer and two coats of matt finshed oil painting etc complete.
28.0 285.20 Providing 10 mm. thick cement plaster in single coat for plastering on ceiling and 188.60 Rupees One Hundred EightyEight Sq.Mt
soffits of stairs upto floor two level and finished even and smooth in (i) Cement Paise Sixty Only
mortar 1:3 ( 1 Cement : 3 sand) @ Second Floor
29.0 27.80 Providing 10 mm. thick cement plaster in single coat for plastering on ceiling and 212.49 Rupees Two Hundred Twelve Paise Sq.Mt
soffits of stairs upto floor two level and finished even and smooth in (i) Cement FourtyNine Only
mortar 1:3 ( 1 Cement : 3 sand) @ Third Floor
30.0 74.30 Providing 15mm thick plaster in on brick / concrete wall for interior plastering mala 207.63 Rupees Two Hundred Seven Paise Sq.Mt
finished even and smooth (i) Cement Mortar 1:3 ( 1 Cement : 3 sand) @ First Floor SixtyThree Only
31.0 329.90 Providing 15mm thick plaster in on brick / concrete wall for interior plastering mala 231.52 Rupees Two Hundred ThirtyOne Sq.Mt
finished even and smooth (i) Cement Mortar 1:3 ( 1 Cement : 3 sand) @ Second Paise FiftyTwo Only
32.0 113.00 Providing 15mm thick plaster in on brick / concrete wall for interior plastering mala 231.52 Rupees Two Hundred ThirtyOne Sq.Mt
finished even and smooth (i) Cement Mortar 1:3 ( 1 Cement : 3 sand) @ Third Floor Paise FiftyTwo Only
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
33.0 331.50 20mm thick sand faced cement plaster on walls upto height 10 metres above 230.08 Rupees Two Hundred Thirty Paise Sq.Mt
ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3- Eight Only
sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.complete.
34.0 178.20 Providing and laying 60 x 60 Anti skid Vertified tiles & 20% Plain Dark shade, 8 mm 1461.17 Rupees One Thousand Four Sq.Mt
thick tile flooring over 20 mm [average] base of cement mortar 1:6 ( 1 Cement : 6 Hundred SixtyOne Paise Seventeen
coarse sand) on new furface or fixing on existing flooring by adhesive materials Only
including dismantling of existing flooring and jointed with colour cement slurry
including finished with flush pointing & cleaning the surface etc. complete pattern
approved architech
35.0 54.30 P & L 60" x 60" vitrified 8 mm thick tile flooring over 20 mm (average) base of 1467.72 Rupees One Thousand Four Sq.Mt
cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing Hundred SixtySeven Paise
flooring by adhesive material including dismentaling of existing flooring and jointed SeventyTwo Only
with color cement slurry including finised with flush pointing & cleaning the surface
etc. complete for antiskit
36.0 24.90 P & L Mirror polished Green Marble Stone slab 20 mm (Average) thick for stair 2707.81 Rupees Two Thousand Seven Sq.Mt
steps and riser as per design incl. full moulded round front edge in trade of steps Hundred Seven Paise EightyOne
laid on 20 mm thick cement mortar 1:6 ( 1 Cement :6 coarse sand ) jointed with Only
grey cement slurry including rubbing and polishing etc. complete
37.0 4.50 Providing and laying Both side mirror polished Green marble stone slab 20 mm 1717.00 Rupees One Thousand Seven Sq.Mt
(Average) thick of approved quality incl. full moulded round front edge fixed in wall Hundred Seventeen Only
for partition and jointed with grey cement slurry including rubbing polishing etc.
38.0 10.10 Providing and laying Ceramic tiles 40 x 40 cm 6mm thick in flooring treads of steps 987.14 Rupees Nine Hundred EightySeven Sq.Mt
and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse Paise Fourteen Only
sand ) finishing with flush pointing in white cement slurry, colour and patter
approved by architect.
39.0 7.10 Providing and laying Ceramic tiles 20 x 20 cm 6mm thick in flooring treads of steps 987.14 Rupees Nine Hundred EightySeven Sq.Mt
and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse Paise Fourteen Only
sand ) finishing with flush pointing in white cement. slurry, colour and patter
approved by architect.
40.0 64.00 Providing and laying Ceramic tiles 20 x 30 cm 6mm thick in skrting risers of steps 1000.51 Rupees One Thousand Paise Sq.Mt
and dedo on 10mm thick cement plaster 1:3 (1- cement : 3-coarse sand) and FiftyOne Only
jointed with white cement slurry colour and patter approved by architect.
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
41.0 232.60 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 779.70 Rupees Seven Hundred SeventyNine Sq.Mt
mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope Paise Seventy Only
and to be tempered to bring mortar creme out upto surface using white cement
including rounding off junctions and extending them upto 15 cm along the
wall,clearing with water and oxalic acid etc. as directed.
42.0 53.10 Distempeing (Three coats) with oil bound washable distemper of approved brand 104.07 Rupees One Hundred Four Paise Sq.Mt
and manufacture and of required shade on wall surfaces to give an even shade, Seven Only
over and including a priming coat with alkali resistance primer of approved brand
after thoroughly brushing the surface and other foreign matter and also including
preparing the surface even and sand parpered smooth
43.0 313.00 Distempeing (Three coats) with oil bound washable distemper of approved brand 112.42 Rupees One Hundred Twelve Paise Sq.Mt
and manufacture and of required shade on wall surfaces to give an even shade, FourtyTwo Only
over and including a priming coat with alkali resistance primer of approved brand
after thoroughly brushing the surface and other foreign matter and also including
preparing the surface even and sand parpered smooth
44.0 331.50 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) 73.83 Rupees SeventyThree Paise Sq.Mt
to give an required shape even shade after thoroughly brushing the surface to EightyThree Only
remove all dirt, and remains of loose powdered materials.etc complete
45.0 54.30 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 43.05 Rupees FourtyThree Paise Five Only Rmt
46.0 12.00 Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. Pipe ( SCH- 72.65 Rupees SeventyTwo Paise SixtyFive Rmt
40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / Only
FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on
the wall with the help of clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including cost of all materials
47.0 18.00 Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. Pipe ( SCH- 91.84 Rupees NinetyOne Paise EightyFour Rmt
40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / Only
FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on
the wall with the help of clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including cost of all materials
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
48.0 18.00 Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. Pipe ( SCH- 148.12 Rupees One Hundred FourtyEight Rmt
40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / Paise Twelve Only
FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on
the wall with the help of clamp at every two metre C/C or shall be concelled as
directed including necessary fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including cost of all materials
49.0 3.00 Providing and fixing Handle valve of approved brand (B) 25 mm Dia 303.00 Rupees Three Hundred Three Only No
50.0 1.00 Providing and fixing Handle valve of approved brand (C) 40 mm Dia 454.50 Rupees Four Hundred FiftyFour No
Paise Fifty Only
51.0 6.00 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) 1053.73 Rupees One Thousand FiftyThree Rmt
conforming to IS 13592-1992 with one end plain and other end socketed with Paise SeventyThree Only
rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm
length x 145 mm heigh at every 2000 mm center to center or shall be concealed in
walls as directed including necessary fittings such as bends, shoes etc. including
testing of pipes and joints and jointed with adhesive solvent cement including cost
of all materials.
52.0 6.00 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) 834.38 Rupees Eight Hundred ThirtyFour Rmt
conforming to IS 13592-1992 with one end plain and other end socketed with Paise ThirtyEight Only
rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm
length x 196 mm heigh at every 2000 mm center to center or shall be concealed in
walls as directed including necessary fittings such as bends, shoes etc. including
testing of pipes and joints and jointed with adhesive solvent cement including cost
of all materials.
53.0 4.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter 733.26 Rupees Seven Hundred ThirtyThree No.
with jali of the following nominal diameter of self cleansing design with C.I scread Paise TwentySix Only
down or hinged grating including the cost of cutting and making good the walls.
54.0 13.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium 186.83 Rupees One Hundred EightySix No.
plated screws down Bib Tap. (i) 15mm dia. (Plumber, Mark, Esco Equivalent Brand) Paise EightyThree Only
55.0 3.00 Providing and fixing Push Type bib taps of following size.(B) Brass chromium 186.83 Rupees One Hundred EightySix No.
plated screws down Bib Tap. (i) 15mm dia. (Plumber, Mark, Esco Equivalent Brand) Paise EightyThree Only
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
56.0 2.00 Providing and fixing pillar tap, capstan head, screw down high pressure with 308.73 Rupees Three Hundred Eight Paise No.
screws, shanks and back nuts. (i) 15mm dia. SeventyThree Only
57.0 2.00 Providing and fixing wash basin with dedestal of std. Height with single hole for 1890.72 Rupees One Thousand Eight No.
pillar tap with C.I or M.S brackets painted white including cutting holes and making Hundred Ninety Paise SeventyTwo
goods the same including. C.P brass waste and waste pipes and bottal trap (A) Only
Vitreous china. (II) Flat back washbasin 550 mm x 400 mm size (I) in colour
(Hindustan, Cera, Parryware or equivalent)
58.0 1.00 Providing and fixing water closet squatting orissa type W.C pan size 580 mm 966.57 Rupees Nine Hundred SixtySix Paise No.
integral footrest and 100 mm P or S trap and in cluding 25 mm dia CP brass flush FiftySeven Only
valve and GI inlet connection etc. comp. (A) Vitreous china long pattern white or
color (Hindustan, Cera, Parryware ro equivalent)
59.0 2.00 Pro & Fix wash down water closet (European w.c pan with integral "p" or "s" trap 2824.97 Rupees Two Thousand Eight No.
and PVC fushing cistern with fittings etc comp incl. plastic sheet cover including Hundred TwentyFour Paise
jointing trap with pipe in cm 1:1 and connecting cistern with closet (a) Vitreous NinetySeven Only
china in white or color
60.0 3.00 Providing and fixing Urinal or approved quality including conecting the Urinal with 1074.86 Rupees One Thousand SeventyFour No.
waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size Paise EightySix Only
61.0 2.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass 859.41 Rupees Eight Hundred FiftyNine No.
mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge Paise FourtyOne Only
with C.P. brass screws and washers.
62.0 2.00 Providing and fixing toilet rail complete with C.P brass braket fixed to wooden plugs 375.82 Rupees Three Hundred SeventyFive No.
with C.P brass screws .(B) 600 mm x 20 mm size Paise EightyTwo Only
63.0 5.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. 205.83 Rupees Two Hundred Five Paise No.
EightyThree Only
64.0 367.00 Applying two coats of putty & two coats of primer of approved brand and 40.59 Rupees Fourty Paise FiftyNine Only Sq.Mts
manufacture on new wall surface to give an even shade including thoroughly
brushing the surface free from mortar dropping and other foreign matter and sand
papered smooth
65.0 104.00 Providing and applying approved imported pattern interior spray texture plaster 1161.50 Rupees One Thousand One Sq.Mts
finish of required shade and design using polymer modified acrylic/cement based Hundred SixtyOne Paise Fifty Only
texture material by mechanical spray pump/hopper system over properly prepared
surface including cleaning, surface preparation, primer coat, bonding agent,
machine spray application, pattern development, levelling, edge finishing, curing,
scaffolding, compressor/pump equipment, labour, tools & plants, protective coating
and all leads & lifts complete as directed by Engineer-in-Charge.
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
66.0 42.00 Providing & Fixing Decorative Wall Panelling using 19 mm thick BWR Grade 6060.00 Rupees Six Thousand Sixty Only Sq.Mts
Plywood finished with 0.6 mm thick Natural Walnut Veneer and PU Matt Polish,
including grooves, edge lipping, framework, adhesives, hardware, scaffolding,
labour, transportation and all incidental charges complete as per approved
architectural drawing, design, pattern and direction of Engineer-in-Charge.
67.0 83.00 Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using 606.95 Rupees Six Hundred Six Paise Sq.Mt
water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI NinetyFive Only
suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm
x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x
mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x
30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener,
scoch bolt connecting cleat,joining compound top coat on ceiling incl.making
necy.opening for light fitting,diffuser etc. comp. as per detail drawing as directed
B Furniture
68.0 2.00 High Back Chair, Wooden Frame, Wooden Cushion Arm, leatherette Tapestry, 24458.16 Rupees TwentyFour Thousand Four No.
Samhongsa Class-4 Gas lift, Metal With Wooden Base. Torsion Bar Hundred FiftyEight Paise Sixteen
69.0 3.00 High Back Chair, Seat & Back Molded Ply, Stainless Steel Cushion Arm, 18448.66 Rupees Eighteen Thousand Four No.
Leatherette Tapestry, Samhongsa Class-4 Gas Lift, Aluminium Base, Swivel Tilt Hundred FourtyEight Paise SixtySix
70.0 1.00 Executive Table, Top & Gable Thickness 36 mm PLPB With 2 mm PVC 51419.10 Rupees FiftyOne Thousand Four No.
Edgebanding, Rest All 18 mm, Side Storage with 3 Drawers & 2 Openable Shutter Hundred Nineteen Paise Ten Only
71.0 1.00 L 1800 x D 1800 x H 750mm CEO Table, Top & Gable Thickness 36 mm PLPB, 38361.82 Rupees ThirtyEight Thousand Three No.
Rest All 18mm PLPB, 3 Drawer Mobile Pedestal & Side Storage with 2 Openable Hundred SixtyOne Paise EightyTwo
Shutter Only
72.0 6.00 NF 751 Visitor Chair, PU Metal Arm, Net Back, Seat Fabric Tapestry, Powder 4967.18 Rupees Four Thousand Nine No.
Coated Pipe Leg, Hundred SixtySeven Paise Eighteen
73.0 2.00 Three Seater Sofa, Wooden Frame, S.S. Finish Frame Pipe Leg, Seat & Back 26922.56 Rupees TwentySix Thousand Nine No.
Leatherette Tapestry Size in mm - 1800(L) X 740(D) X 790(H) Three Seater Hundred TwentyTwo Paise FiftySix
74.0 3.00 Medium Back Chair, PP Fixed Armrest, Net Back & Seat Fabric Tapestry, Swivel 6070.10 Rupees Six Thousand Seventy Paise No.
Tilt Mechanism, Samhongsa Class-4 Gas Lift, Nylon Base. Swivel Tilt Ten Only
75.0 1.00 Wooden Podium Made in 18mm PLPB with Two Shelves Size - W 600 D 450 X H 10398.96 Rupees Ten Thousand Three No.
1200 mm Hundred NinetyEight Paise NinetySix
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
76.0 1.00 2 Bay Drive Type, Single Static -01 Nos. Base 65 x 2.5mm W 1830 x D 455 x H 204832.04 Rupees Two Lakh Four Thousand No.
2190mm 2 Bay Drive Type, -01 Nos. Double Movable Base 65 x 2.5mm W 1830 x Eight Hundred ThirtyTwo Paise Four
D 910 x H 2190mm 2 Bay Drive Type, Single Last Movable (With Lock) -01 Nos. Only
Base 65 x 2.5mm W 1830 x D 455 x H 2190mm
C Eelectrict
77.0 70.00 Rep old and U/S by new Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire 539.34 Rupees Five Hundred ThirtyNine Pts.
of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated Paise ThirtyFour Only
multistrand copper wires, in following type of pipe to be erected concealed in/ on
surface on wall/ceiling complete with 6A Modular type switch / bell push &
accessories and earth continuity of following type, erected on PVC / Metallic box,
single mounting base frame covered with textured/metallic front plate modules
erected on / in wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC
pipe and accessories Cat.III
78.0 28.00 Providing new Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 765.58 Rupees Seven Hundred SixtyFive Pts.
(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand Paise FiftyEight Only
copper wires, in following type of pipe to be erected concealed in / flushed on
wall/ceiling complete with 6A Modular type switch and hum free EME four or more
step type electronic fan regulator with separately mounted and accessories with
earth continuity of following type erected on PVC / Metallic box, single mounting
base frame covered with textured/metallic front plate modules erected on / in wall /
ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as
directed. (a) with medium class Rigid PVC pipe and accessories Cat.III
79.0 28.00 Providing New Point wiring for Looped Plug with 6A Modular type switch & 5 pin 309.06 Rupees Three Hundred Nine Paise Pts.
socket erected on PVC / Metallic box, single mounting base frame covered with Six Only
textured / metallic front plate modules erected on / in wall / ceiling with following
type accessories Cat.III
80.0 0.00 Providing following type of Modular Type Accessories mounted with PVC / 0
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as per site
situation directed by Engineer In charge.
80.1 10.00 (9) 16 Amp. SP one way switch Cat.III 180.79 Rupees One Hundred Eighty Paise Ea.
SeventyNine Only
80.2 10.00 (10) 6/16Amp. Universal socket Cat.III 199.98 Rupees One Hundred NinetyNine Ea.
Paise NinetyEight Only
80.3 2.00 (4) TV Co-axial Socket outlet Cat.III 160.59 Rupees One Hundred Sixty Paise Ea.
FiftyNine Only
80.4 40.00 (7) Blank Plate Single Cat.III 25.25 Rupees TwentyFive Paise Ea.
TwentyFive Only
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
81.0 150.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size 33.33 Rupees ThirtyThree Paise Ea.
complete to be erected on/in wall or ceiling erected with necessary PVC fittings & ThirtyThree Only
Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in
approved manner as directed (b) 25 mm
82.0 10.00 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of 17.17 Rupees Seventeen Paise Seventeen Mtr.
coupling, PVC bushes, Check-nuts etc. complete of following sizes. (1) 20 mm Only
83.0 450.00 Providing Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 104.03 Rupees One Hundred Four Paise Mtr.
Copper conductor wire in following type of pipe to be erected concealed in /flushed Three Only
on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of following size (a) with medium class
Rigid PVC pipe and accessories(b) 2 wire 2.5 sq. mm
84.0 65.00 Providing Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 140.39 Rupees One Hundred Fourty Paise Mtr.
Copper conductor wire in following type of pipe to be erected in / on wall / ceiling ThirtyNine Only
with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green
colour for earth continuity of following size(a) with medium class Rigid PVC pipe
and accessories (a) 2 wire 4 sq. mm
84.1 150.00 (b) 2 wire 6 sq. mm 184.83 Rupees One Hundred EightyFour Mtr.
Paise EightyThree Only
85.0 100.00 Providing & Erecting approved make following size of TV Co-axial flexible cable 39.39 Rupees ThirtyNine Paise ThirtyNine Mtr.
comprising inner conductor of solid bare copper insulated with Foam PE & Only
Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable
coverage overall sheathed with black PVC insulation.b).RG-6
86.0 300.00 Supplying & erecting approved make LAN cable of following size in existing pipe as 47.47 Rupees FourtySeven Paise Mtr.
per direction [C] CAT - 6 FourtySeven Only
87.0 12.00 Providing & erecting Switch board for Computer or electric apparatus consisting of 1133.22 Rupees One Thousand One Ea.
following items in single board erected on PVC / Metal board with 3 mm thick PC Hundred ThirtyThree Paise
(Polycarbonate) / Acrylic sheet erected as directed TwentyTwo Only
1 no. 6A/16A universal plug-switch combined.
4 nos. 6A Switch
4 nos. 6A 5 pin Plug [B] For Modular Type Accessories Cat.III
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
88.0 21.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 295.93 Rupees Two Hundred NinetyFive Ea.
Watt assembled on single MCPCB, with housing used as a heat sink shall be Paise NinetyThree Only
made of co-extruded polycarbonate channel with diffuser part in needed opal finish
with company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
wattage capacity between the ranges shown.) (iii) 18-20 Watts, Surge - 2KV,IP-20,
conventional 4 feet Cat-lll
89.0 22.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 1794.77 Rupees One Thousand Seven Ea.
Watt assembled on single MCPCB, with housing used as a heat sink shall be Hundred NinetyFour Paise
made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast SeventySeven Only
powder coated and high U.V. & corrosion resistance with diffuser housed in
aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
wattage capacity between the ranges shown.) (B) LED Panel Light with provision
for Plane front frame with translucent cover fixed to housing complete.IP20 (vi)
watts, 24" x 24", Surge- 2KV Cat-lll
90.0 6.00 Supplying and erecting LED street light / Flood light fittings with High power White 6177.16 Rupees Six Thousand One Hundred Ea.
LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more SeventySeven Paise Sixteen Only
than 130 lm/w and corrosion free High pressure die cast aluminum housing with
smooth finish powder coated and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,
CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt
. LED driver efficiency > 85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of Wattage capacity of
ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light
must have 440VAC line supply with over-voltage protection. (iv) above 90 to
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
91.0 12.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 123.22 Rupees One Hundred TwentyThree Ea.
operate on 240 V A.C. system and having breaking capacity 10 KA to be erected Paise TwentyTwo Only
in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III
92.0 1.00 Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 3344.11 Rupees Three Thousand Three Ea.
30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 Hundred FourtyFour Paise Eleven
phase and neutral 415V. having characteristic of quick action & tripping with all Only
advance feature & do not incorporate any electronic component for following Max.
rating erected as directed. (iii) 63 Amps. FP Cat.III
93.0 1.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 1680.64 Rupees One Thousand Six Hundred Ea.
surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming Eighty Paise SixtyFour Only
to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of MCB to be used) (B) three
phase incoming and single phase horizontal type outgoing Per phase isolation type
(PPI) (b) sheet steel double door (i)4 way
94.0 28.00 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with 1948.29 Rupees One Thousand Nine Ea.
double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep Hundred FourtyEight Paise
complete having 3blades with aluminium blades with , canopy & 30 cm. down rod TwentyNine Only
erected with earthing.(Make shall be approved by Engineer in charge))
95.0 14.00 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down 108.07 Rupees One Hundred Eight Paise Ea.
rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible Seven Only
wire with earthing.
96.0 28.00 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts 98.98 Rupees NinetyEight Paise Ea.
erected with necessary hook of 10 mm M.S. Round Bar. NinetyEight Only
97.0 24.00 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade 58.58 Rupees FiftyEight Paise FiftyEight Mtr.
ISI marked copper wires of following size to be erected as directed.e).1.50 Sq.mm Only
3 core round PVC sheathed
98.0 325.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 168.67 Rupees One Hundred SixtyEight Mtr
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Paise SixtySeven Only
existing trench / pipe of following size of cables (c) 4 core 10 Sq. mm
99.0 6.00 Supplying & erecting approved make SMC press moulded composite FRP. loop- 515.10 Rupees Five Hundred Fifteen Paise Ea.
in, loop-out approx. 2mm thick box complete with bakelite connector strip 4way & Ten Only
hinged doors having locking arrangements with mounting clamp with nuts, bolts &
washers suitable for erection on pole with cable clamps& earth bolt of following size
of box.(b) 250mm x 200mm x 100mm [deep]
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
100.0 1.00 Supplying and erecting approved make online Un-interruptible Power Supply 82941.20 Rupees EightyTwo Thousand Nine Ea.
system comprising flat cum-boost charger, static Inverter & sealed maintenance Hundred FourtyOne Paise Twenty
free batteries. The charger having operating capacity for input 160-270V AC & Only
inverter having output 23OV,5O Hz Ac with 0.8 load power factor with battery,
over under voltage output with over load & short circuit protection equipment. The
system housed in CRC sheet duly powder coated paint with following capacity &
with Following size of batteries.(C) 3 KVA(i) with 6 Nos. of 12V, 65AH SMF
batteries for 1Hr. Backup
101.0 9.00 Supplying & erecting approved make Electronics Starter and relay for air 975.66 Rupees Nine Hundred SeventyFive Ea.
conditioners in ABS plastic moulded housing. Company fabricated with bakelite Paise SixtySix Only
terminal for connection with silver coating bimetallic contact in switching device for
o/p with following features.
(1) Low Voltage Protection below 130 V
(2) High Voltage protection above 270 V
(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp. (inverse time chara-)
(4) Indicating LEDs for AC on LV, HV, O/L, T/D
(5) With unique feature of 3 minute of time delay
102.0 6.00 Providing and erecting Inverter based approved make split air-conditioning unit 61989.76 Rupees SixtyOne Thousand Nine No
consisting of condensing unit with variable speed fan motor, inverter type Hundred EightyNine Paise
hermetically sealed rotary compressor with accessories etc. duly connected SeventySix Only
separately erected evaporating unit and blower motor with its accessories by
means of extra supplied proper insulated copper tubing,drain PVC pipes suitable
for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote
Control & MS Stand) with necessary core cutting. (1)For ISEER Range
(KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton capacity - Premium Cat.
103.0 0.00 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling 61482.74 Rupees SixtyOne Thousand Four No
capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the Hundred EightyTwo Paise
water should drop by 15˚C within a hour, The water cooler should be comprising of SeventyFour Only
hermetically sealed compressor, fan motor, condensing unit, water tank surrounded
by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet
connection. The body of water cooler will be made from Stainless Steel.
104.0 3.00 Supplying & erecting approved make low noise decorative exhaust fan having 1366.53 Rupees One Thousand Three No
square frame ABS body with inbuilt lowers & square frame.200mm with 1350RPM Hundred SixtySix Paise FiftyThree
Cat.II Only
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
105.0 50.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size 33.33 Rupees ThirtyThree Paise Mtr
complete to be erected on/in wall or ceiling erected with necessary PVC fittings & ThirtyThree Only
Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in
approved manner as directed (b) 25 mm
106.0 1.00 Providing & erecting, programming, testing of chairman unit microphone with 7191.20 Rupees Seven Thousand One Each
flexible stem of 480 mm in length and light ring built in loud speaker ,two head Hundred NinetyOne Paise Twenty
phone socket ,attractive design ,priority button for chairman microphone,built in Only
volume control for head phones,chime tone facility to precede chairman priority
calls,microphone on/off button,red indicates for microphone is active,frequency
response -400Hz to 10kHz,nominal acoustic input -85 dB SPL [[Approved by
Competent Authority i.e. not Below the rank of Executive Engineer ]
107.0 26.00 Providing & erecting, programming, testing of Delegate unit microphone with 6678.12 Rupees Six Thousand Six Hundred Each
flexible stem of 480 mm in length and light ring built in loud speaker ,two head SeventyEight Paise Twelve Only
phone socket ,attractive design ,built in volume control for head phones,chime tone
facility to precede chairman priority calls,microphone on/off button,red indicates for
microphone is active,frequency response -400Hz to 10kHz,nominal acoustic input -
85 dB SPL [[Approved by Competent Authority i.e. not Below the rank of Executive
Engineer ]
108.0 8.00 Supplying & erecting Amplifier having following specification: 13558.24 Rupees Thirteen Thousand Five Each
Power Output :250W (RMS) (300W Max.) Hundred FiftyEight Paise TwentyFour
inputs : 6 Misc. & 2 Aux. Only
frequency Response :50-1500HZ I3db
Tone Controls :Cut & Boost type
LED Meter :5 LED Arrays
The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic
changeover from AC to Battery operation, duly protected by wrong Battery Polarity
connections. [[Approved by Competent Authority i.e. not Below the rank of
Executive Engineer ]
109.0 8.00 Supplying and erecting wall mount speaker with rated power of 30 watt/power 3083.53 Rupees Three Thousand Each
tapping 30/15/7.5 watt available,opening angle 180 degree H * 77 degree V ,sound EightyThree Paise FiftyThree Only
pressure level 88 dB ,frequency response of 70Hz to 20KHz [[Approved by
Competent Authority i.e. not Below the rank of Executive Engineer ]
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
110.0 2.00 Providing and erecting cordless microphone with UHF Diversity handheld wireless 6163.02 Rupees Six Thousand One Hundred Each
microphone/caller wireless complete with receiver and transmitter unit,Cardiod SixtyThree Paise Two Only
,polar pattern,dynamic microphone,LCD display for battery and frequency status
and information ,32 preset channels,with compatible groups of 8 channels,14
hrs.battery life,frequency response 80Hz to 18KHz.,RF sensitivity <1.0 Uv,image
rejection > 55 dB,dynamic range >95 dB and receiver having 32 channels,S/N
ratio>100 dBA,Dynamic range>95 dB,distortion<1% [[Approved by Competent
Authority i.e. not Below the rank of Executive Engineer ]
111.0 1.00 SITC of Mixer amplifier, 240W [Approved by Competent Authority i.e. not Below 22000.83 Rupees TwentyTwo Thousand Paise Each
the rank of Executive Engineer ] EightyThree Only
112.0 1.00 SITC of 3LCD Lamp based projector having wxga (1280x800) or better resolution 33895.60 Rupees ThirtyThree Thousand Eight Each
with minimum white brightness of 3800 lumens and color brightness of 3800 Hundred NinetyFive Paise Sixty Only
lumens. The projector should have minimum 1HDMI,1VGA input. Having contrast
ratio of 15000:1 or more. the projector should have auto vertical key stone
correction of +/- 30 degree and Manual Horizontal of +/-30 degree. the projector
should have optical lens, throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens focus
Manual having focal length 16.9mm to 20.28mm. projector should have features
like AV mute slide, quick corner and split function and should support wireless
functionality with inbuilt wifi or wifi dongle. [Approved by Competent Authority i.e.
not Below the rank of Executive Engineer ]
113.0 1.00 SITC of universal Projector mounting kit, with necessary grouting, fasteners etc. 6848.81 Rupees Six Thousand Eight Hundred Each
with adjustable height and suitable for all types of projectors. [Approved by FourtyEight Paise EightyOne Only
Competent Authority i.e. not Below the rank of Executive Engineer ]
114.0 1.00 SITC of 84 inch Self Lock MW (6 x 4) Instalock Slow Retraction Screen, Aspect 3379.46 Rupees Three Thousand Three Each
Ratio-4:3 [Approved by Competent Authority i.e. not Below the rank of Executive Hundred SeventyNine Paise
Engineer ] FourtySix Only
115.0 1.00 55-inch 4K Ultra HD Smart TV 58075.00 Rupees FiftyEight Thousand Each
• Display: 4K Processor X1, Live Colour™ Technology, Motionflow™ XR SeventyFive Only
• Protection: X-Protection PRO (Anti-Humidity, Lightning, Surge - Critical for
municipal offices)
• Smart Features: Google TV with Chromecast Built-in, Apple AirPlay
• Connectivity: 3x HDMI, 2x USB, Bluetooth 5.0 Professional Installation Kit
(Concealed Wiring + Pro Mount) Extended 2-Year Comprehensive Warranty (Total
In Words Rupees FiftyFive Lakh TwentySeven Thousand Nine Hundred SixtyFour Paise SeventyFive Only
I/We am/are willing to carry out the work at ………………………………………………………………………% above/below
Percent (should be written in figures and words ) of the estimated rates mentioned above. Amount of my/our tender works out as under:-
Quantity Total Amount
Quantity Total Amount
Estimated Rate
It. Estimated according to
Description of Item (in Rs.) Unit
No. But may be estimated
more or less quantities
In Figure in Words
* Estimated amount * Estimated amount
Put to tender................................... Rs. ………………….. Put to tender......................................... Rs. …………………..
Deduct : ............................% below Rs. ………………….. Add ……............................... % above Rs. …………………
Net.................................................. Rs. ………………….. Total ...................................................... Rs. …………………
In words …………………………………………............................................................. In words …………………………………………........................................................................
* (Please strike out whicheve is not applicable).
Note 1- All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.
Note 2- All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.
Note 3- Rates quoted include clearance of site (prior commencement of work and at itscolose) in all respects and hold good for work under all conditions, site, moisture, weather etc.
Note 4- To be continued on additional sheets, if found necessary.
Note 5- GST at 18% will be charged on the bill generated.
Chief Officer
Nagarpalika Tharad
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1-Notificatin NSS THD-2026-27.pdf
2- SBD Book -NSS THD-2026-27.pdf
3. Schedule B NSS THD-2026-27.pdf
7. Govt GR.pdf
5.Technical_Specifications_Items_1-76.pdf
8. Sharato.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].