Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹74.7 LAccepted-AOC NAMOPARA PURULIA | PURULIA | PURULIA | WEST BENGAL | 723101 | L1 | Accepted-AOC lowest | |
| 2 | L2₹76.2 L+₹1.5 L (1.98%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest | |
| 3 | L3₹76.3 L+₹1.6 L (2.11%)Rejected-Finance 344 1 SB GORAI ROAD HILL VIEW PARK NORTH ASANSOL | ASANSOL | WEST BENGAL | L3 | Rejected-Finance 3rd lowest |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
25 Nov 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, PMD,PHE.Dte
Office of the Executive Engineer Purulia Mechanical Division,PHE.Dte Ranchi Road,Purulia.
Supply delivery and installation of centrifugal pumping machineries, flowmeter, MCC panel and other allied works at intake side pump house for augmentation of Balarampur water supply scheme under PMD, PHE Dte. In the district of Purulia.
2022_PHED_419229_11
15/ EE/PMD/PHED OF 2022-2023
Open Tender
MECHANICAL
Item Rate
60 days
Purulia
Please refer Tender documents.
6 documents required · 6 mandatory
₹1.6 L
Yes
23 Mar 2023
4 Nov 2022
28 Nov 2022
4 Nov 2022
25 Nov 2022
4 Nov 2022
Amount
PART A
Supply, delivery at site Vertical tuebine pump suitable for dam capble of discharge against total head complete with pump motor set as per following specifications: Capacity:275m3/hour, Head: 30mtr, Pump casing: CI Pump impeller: Bronze, Shaft-SS sump depth-10mtr(approx) Speed: 1460 rpm, Testing: as per IS 9137. Pump efficiency-above 70% (Make:- Kirloskar/CG/ KSB/WPIL/WILO/other approved) [ MOC, Test certificate, warranty certificate along with characteristics curve to be produced at the time of delivery] (Materials should be supplied after taking approval from department.) (All routine test to be performed in presence of EIC before delivery) (All technical details has attached) Supply and delivery at site of horizontal foot mounted squirell cage induction motor of suitable rating for driving the pump mentioned above. Power supply: 415V+ 10%, 50Hz + 5%, 3ph, Duty-S1, TEFC, IP55, Class-‘F’ temp rise limited to class ‘B’, connection:SDS, Efficiency class-IE3 Motor power should be 15% - 20% over than pump input power at duty point i.e. Motor should be 37 KW approximately.) Ambient temp. 50°C Speed: 1500 rpm as sync (Make:- CG/ABB/KBL/Marathon/other aaproved make) (Materials should be supplied after taking approval from department.) (All routine test to be performed in presence of EIC before delivery.)
Supply delivery of following valves: Supply delivery of following size CIDF swing check type NRV PN-1.6 IS: 5312 (Part-1) (Make-IVI/IVC/Kirloskar/Jupiter) (a) 200mm dia(individual delivery side)
(b) 250mm dia(Common header)
Supply delivery of following size Non-Rising Spindle sluice valves with PN 1.6 delivery side as per IS 14846 spindle of IS 6603, gr12 cr13 (Make: IVI/IVC/Kirloskar/Jupitar) (c) 200mm dia(individual delivery line)
Supply delivery and fixing storage of burden type pressure gauge, 150mm cast Al. dial along with DN15 GI impulse line with valve (0-16Kg) (Make-Febig/Hguru)
Supply delivery of following M.S. pipe as per IS:1239(PART I&II) (c) 200mm dia of 7mm thickness
(d) 250mm dia of 7mm thickness
Supply and delivery at site of 1.1 KV grade XPLE insulated Al Ar. Conductor cable of IS-7098(Part-1)2011 (Make-Finolex/Havells/Gloster/Polycab) (a) 3core 35sqmm
Supply delivery of 250 mm dia. Electromagnetic flow meter shall be Microprocessor based with advance diagnostic capabilities & HART communication protocal with have digital memory, and satisfactory of following specification a. For Sensor :- Principle of flow meter : Electro-Magnetic Induction, Type remote mounted, Lining material PTFE, Electrode material SS3116L, Grounding : 02 nos grounding electrodes, Empty pie Detection : Inbuilt, Coil housing Die-Cast Aluminium, Flange MOC/Rating : SS/Flange ANSI /ASME B16.5/16.47 series B class 250, Sensor Memory : Digital memory for all csalibratioin & configuration data, Sensor size 300mm length, Accuracy + 1.4% of the flow rate, IP-68 protection class, Medium temp. limit :0-80°C, Measurement of flow Bi-directional, Conductivity Required : >5 µs/cm, Installation condition : Upstream(10D) & Downstream(5D) (Straight Section), Accordig to EN 29104, Vibration level : 10-58 Hz range, Max. deflection 0.15 mm. Specification for Transmitter:- Display : fully configurable graphical LED with capacitive Touch keys, Output : 1 Current output (active or passive), 2 Digital output (Passive), HART, Calibration : Unique self calibrating transmitter (patented) for the ultimate stability and repeatability, Power Capacity : Universal switch mode power supply, DIP Switch : Three configuration DIP switchs are mounted on the transmitter backplane Board, Transmitter Housing : Powder - coated aluminium with glass window,single compartment , Protection class : NEMA 4X, IP-67, Power supply : 100~264 V AC, 50Hz Power supply through cvt, Cable length 10mtr, Cable entry " 1/2" NPTF, Language : English, Temp Limiptation : -20~60°C.
Supply delivery of CI specials per IS make Kejriwal. a) 250mm dia.(internal)
Supply delivery of 250mm dia MS dismantling joints PN 1.6 ratings with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts.
Installation testing and commissioning of above pumping machineries and flowmeter with above supplied valve, M.S. pipe, cable etc. with pipe support, flange bend, reducer, enlarger, expansion joint, valve support, earthing strip, cable tray, saddle, ladder etc. as required. Laying of cable, by making foundation as per requirement, connection with MCC panel as per direction of EIC & IE rules to complete net finishing of the whole installation and making earthing connection with all pumping machineries. Rate is including hire charges of generator, welding set, fuels, lubricants & gland to complete the job as per relevant IS. Double earthing should be provided in all euipments connected with 400 + 10% volt and single earthing should be provided in rest of all equipments. (Including connection of common header with the rising main by necessary all erection materials, pipe support, reducer, enlarger, expansion joint, valve support. (Any item or accessories not considered in the specification but required to complete the entire installation and operation shall have to be supplied and installed. No extra charge shall be provided for this purpose).
Supply and fitting fixing 415 Volt, AC3 duty four pole, 200Amp MCCB of breaking capacity 50KA(At intake side kiosk for receiving power from WTP) with TMA protection with fixed thermal and fixed magnetic/adjustable thermal and fixed magnetic setting in existing SS enclosure with IP 42/43 protection powder coated in existing Kiosk at intake side as per direction of EIC. (Make-ABB/Siemens/Havells)
Supply and delivery at site following size XLPE insulated Ar. Al. conductor cable.(IS-7098 part-1, 2011) ) (Make-Havells/Gloster/Polycab/Finolex/Mescab) (a) 3.5core 70sqmm(From intake kiosk to intake MCC panel)
Laying of above through wall including S/F MS clamp with earthing attachment in 2 X 10 SWG GI(Hot Deep) wire making holes etc as necessary mending good damages and painting (a) 3.5core 70sqmm
Excavation of earth for installion of earth electrode and filling and ramming a)for morum soil
Earthing with 65mm dia GI pipe (tata-medium)x3.0Mts. long and 50x6mm galvanised(Hot dip) steel strip(4mtr long) standard GI(Hot Dip) wire,20mm dia x 125mm long galvanized bolt,double nuts ,double washers including finishing both ends by making holesetc. and S&F 65mm dia GI pipe(ISI-medium) protection (3Mts)longto be filled with bitumen partly under the ground level; and partly above ground level to an average depth 3.65mtrs.(for LT equipments of CW pump house, panel room etc. )
supply and fixing earth busbar of galvanized (Hot Dip) MS flat 50mm x 6mm on wall having clearence of 6mm from wall including providing drilled holes on the busbar complete with GI bolts,nuts,washers with earthing
Extra for providing masonery enclosure on the top of the earth electrode of over all size 86.36 cm x 86.36 cm x 46 cm deep ( below the ground level ) complete with cemented bricks work (1:6) of 25 cm width duly plasterd with cement morter (inside) CI hinged inspection cover size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos 12 mm dia holes on the GI pipe.
PART B
Supply & delivery at site alone front and rear lockable hinged door access type MCC panel with compartment wise 1.6mm thick and load bearing 2mm CRCA sheet steel enclosed indoor floor mounted dust & vermin proof equivalent to IP-54 degree of protection CPRI approved, epoxy painted with all Neoprene gaskets, cubical type with front & rear lockable hinged door MCC with TPN electrolytic grade L.T. panel on FRP insulators, detachable gland plate at bottom & suitable for installation on cable trenches complete with Al bus bar of suitable size ( 1A/mm2 will be max.) with necessary earthing protection.(For CW pump house and O/G feeder of blower room, chlorine room and internal external lighting feeder) (SOQ attached)
Installation and commissioning and testing of above mentioned two nos MCC Panel by making required size masonary cable trench and necessary foundation with supplying required no. compression gland, socket, cable lug, MS chequers sheet, insulating rubber mat, channel ,angle earthing 50mm x 6mm GI stripe for earthing connection etc. by expert electrician and electrical supervisor to complete the job upto satisfaction of EIC. Including all electrical connections to MCC panel with all pumps and from WBSEDCL meter. (MCC panel foundation should be make after taking foundation drawing approval from department.) (Any item or accessories not considered in the specification but required to complete the entire installation and operation shall have to be supplied and installed. No extra charge shall be provided for this purpose).
Add GST @ 18%
Add CESS @ 1%
TAPAN KUMAR DEY
EASTERN INDIA SALES AND SERVICE
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .