Compound Wall Repairing Around Different AMC Plot In Thaltej Ward And Other Ward in North West Zone.

Name of Work: Compound Wall Repairing Around Different AMC Plot In Thaltej Ward And Other Ward in

North West Zone.

Sr. No Qty Items Per

Excavation for foundation up to1.5 m depth including sorting out

and stacking of useful materials and disposing of theexcavated

stuff upto 50 Meter lead.(A) Loose or soft soil (R & B S.O.R 2023-

24 I.no. Item Code 04001A)

5 Upto 1.5 mt Depth 115.92 Cmt

5 1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidation each deposited layer by ramming and

Providing and laying cement concrete1:5:10 (1-Cement: 5-

coarses sand and:10-hand broken stone aggregates 40mm

nominal size) and curing complete excluding cost of formworkin (A)

Foundation and Plinth.

Providing and laying cement concrete1:4:8(1-Cement 4- coarses

and:8-hand broken stone aggregates 40mm nominal size) and

curing complete excluding cost of formworkin(A) Foundation and

Providing and laying cement concrete1:3:6 (1-Cement: 3-

coarses sand and:6-hand broken stone aggregates 40mm nominal

size) and curing complete excluding cost of formworkin (A)

Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse

6 2 sand:6-crushed stone aggregates 20mm nominal size) and curing 4006.15 Cmt

complete including cost of formwork in (A) wall caps/coping

Providing and laying cement concrete work 1:2:4 ((1-Cement:2-

7 coarse sand:4-graded aggregates 20mm nominal size) curing

complete excluding cost of formwork and reinforcement.

a 2 Foundations, footings, base or columns and mass concrete 3923.53 Cmt

Slabs, landing, shelves, balconies, lintels, beams, girders

and cantilivers upto floor two level

c 2 Independent piers, columns, and pillars, upto floor two level 3661.3 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregates 20 mm minal size) for reinforced

concrete chhajjas not exceeding 10 cm. thickness upto floors

8 2 two level including finishing the exposed surfaces with cement 6487.07 Cu.M.

mortar 1:3 (1 cement : 3 find sand) to give a smooth and even surface

centering and formwork and curing complete excluding cost of

Providing and laying controlled cement concrete / Ready Mix

9 Concrete of M-200 and curing complete, excluding the cost of

form work and reinforcement for reinforced concrete work in:

(A) 5 Foundations, footings, base of columns, and mass concrete. 3977.88 Cu.M.

(B) 5 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and

Cantilever upto floor

(D) 2 Columns, pillars, posts, and struts, up to floor two level. 4558.2 Cu.M.

(E) 2 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

(K) 2 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4 (1-

Cement 2-coarsesand: 4-graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of form work but excluding the cost of reinforsement

for R.C.C work in (iv) Slabs having more than 13 cm and upto

Providing and Laying ordinary cement concrete 1:2:4 (1-

Cement 2-coarsesand: 4-graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of form work but excluding the cost of reinforsement

for R.C.C work in (iv) Slabs having more than 8 cm and upto

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg./Sq.Cm.in

foundation and plinth in Cement Mortar1:6 (1-Cement :6 -

10 (A) Conventional (upto 10 ton) 3981.21 Cmt

4 B) Modular 4241.7 Cmt

Extra Rate for brickwork in Above Item for super structure

above plinth level upto floor two level (B) Conventional

a 10 (A) Conventional 272.25 Cmt

b 5 B) Modular 262.35 Cmt

c 2 C) above floor two level Item No. 2(6.13) (A) Modular 42.66 Per Cum

d 2 D) above floor two level Item No. 2(6.13) (B) Conventional 40.09 Per Cum

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:5 ( 1-Cement : 5 coarse sand ) in foundation and

Plinth conventional brickwork

Extra for half brick masonry in super structure above plinth

15 24.2 level upto floor two level (B) conventional 52.8 Smt

Providing form work in ordinary timber planking so as to give

a rough finish including centering, shuttering, strutting and

propping etc. height of propping and centering below

supporting floor to celling not exceeding 4 M & removal of the

same for in situ reinforced or plain concrete work upto floor four

a 2 Foundation, footings,bases of columns etc. and mass concrete. 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs Landings

and the like. (1) Floors etc. upto 200 mm in thickness.

(B) Flat surfaces such as soffits of suspended floor roof slabs

Landings and the like. (2) Floors etc. above 200mm in thickness.

Vertical surface such as walls (any thickness) partitions and the like

including attached buttresses & string course & the like.

(ii)Sides And Soffits Of Beam, Haunchings Cantilevers, Girders,

Bressumers And Lintels Not Exceeding 1 M In Depth.

(G) Columns PillarsPosts and struts. (1) Square Rectangular

Polygonal in plan.

g 2 (2) Circular or curved in plan. 422.1 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers

Girders Bressumers and Lintels exceeding 1M.in Depth.

Providing and fixing 35 mm thick panelled, glazed or panelled

and glazed shutters for Doors windows and clear story windows

including anodised alluminium But hinges with necessary screws

and indian teak wood shutters with.

a 2 (A) Plywood sheet panels. 3459.09 Smt

b 2 (B) Particle board panels 3464.51 Smt

c 2 (C)Hard board panels. 3433.65 Smt

d 2 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup boards

18 2 etc. including black enamelled M.S. butt hinges with necessary 3006.75 Smt

screws.(A) Indian teak wood. (i) Fully Panelled.

Providing and fixing 25 mm thick shutters for cupboards etc. including

a 2 anodised alluminiu butt hinges with necessary screws. (A) Indian teak 3006.75 Smt

wood. (ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for cupboards etc. including

b 2 anodised alluminiu butt hinges with necessary screws. (A) Indian teak 2814.42 Smt

wood. (ii) Partly panelled and partl glazed.

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

Providing and fixing glazed louvered glass windows

20 2 and ventilators with teak wood frame 10 cm. x 7 cm. size 4102.54 Smt

including 3 coats of oil painting to wood work etc.complete.

Providing and fixing glazed louvered glass windows and ventilators

with teak wood frame 10 cm.x7 cm. size including 3 coats of

oil painting to wood work etc.complete.with wooden louvers plank

Providing and fixing 35 mm thick shutters for Doors, windows

and clere story windows including Indian teak wood frames

22 2 cm x 7 cm. size including anodized alluminium fixtures and 4595.06 Smt

fastenings including primer coat of approved quality and two coats

of oil painting etc, complete.(ii) Fully Glazed.

Providing and fixing 35 mm thick shutters for Doors, windows

and clere story windows including Indian teak wood frames 10 cm x

23 2 cm. size including black enamelled iron oxidixed fixtures and 5285.45 Smt

fastenings including primer coat of approved quality and two coats of

oil painting etc, complete.(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm x 7 cm.

a 2 size including anodized alluminium fixtures and fastenings including 4940.25 Smt

primer coat of approved quality and two coats of oil painting etc,

complete. (iii) Partly panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY MADE SOLID

PANEL PVC DOOR SHUTTER consisting of frame made out of

M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for

stiles and 15 mm x 15 mm for top and bottom rails.M.S. frames hall

have a coat of steel primers of approved make and manufacture,

M.S. frames hall be covered with 5 mm thick heat moulded PVC

‘C’ channel of size 30 x 50 mm formings tiles, and 5 mm thick

75 mm wide PVC sheets for to prail, lock rail and bottom rail on either

side, and 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet

as gap insert for top rail and bottom rail, Panelling of 5 stiles and

rails with 30 mm wide x 5 mm thick PVC sheet beading on

eighter side, and joined together with solventcement adhesive,.

An additional 5 mm thick PVC strip of 20 mm width is to be stculkon

the interiors side of the ‘c’ channel using PVC solvent

cement adhesive etc. complete as per direction of Engineer

incharge, manufacture’s specification and drawing.

Providing and fixing in position collapsible steel shutters

with vertical channels 20 x 10 x 2 mm braced with flat iron

diagonal 20 x 5 mm size with top and bottom rails T iron 40 x 40 x

6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking

arrangements, stoppers, handles, including a priming coat of

red lead paint & approved make.

Providing and fixing 1 mm thick M.S. sheet sliding shutters

with frame and diagonal braces of 40x40x6 mm angle iron,

3.15 mm M.S.gusset plates at Junctions and corners 25 mm

26 2 dia. pulley, 40x40x6 mm angle and T-iron guide rail at 3652.12 Sqm

top and bottom respactively with handles, stoppers and locking

agangement etc, including applying a priming coat of red lead

Providing & Fixing in position Alluminium doors with frame using

approved quality anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium) (a) Frame sections

101.6x44.45 mm (b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom

27 2 section at 114.3x44.45 mm at(1.37kg/mt) Shutter middle section at

100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick

approved color Acrylic sheet of standard quality fixed with glazing

chips on upper pannel & Laminated sheet on lower pannel

(wtt.0.13 kg/Rmt) etc. comp.as direction of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having extruded

aluminum Colour r Powder Coated section frame main outer size

127mm x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four

track member size 122.20mm x 31.75mm x 1.10mm @ Wt.

Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@

28 2 Wt. 1.398 Kg/mt with sliding shutters of horizontal member size 40mm 2119.14 Sq. M.

x 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 40mm

x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

Providing & Fixing in position Alluminium vents with frame using

approved anodised extruded alluminium section as approved

by Engg. In charge.(Jindal alluminium) units equivalent

29 2 Approved Rate)Frame section of 63.50 x 38.50 mm. (wt.

0.68Kg/Rmt) incl. Providing & Installing 5 mmthick approved color

Acrylic sheet of standard quality etc. comp.

Providing and fixing standared extruded of alluminium section

of size 63 mmx38.10 mmx1.2 mm (Jindal Section:2434, or

30 2 equivalent @ Wt.0.643 Kg/mt) with colour anodized 1163.92 Sq. M.

alluminium frame for ventilation with 5 mm thick frosted glass

as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of size

63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder

31 2 Coated alluminium frame with 5 mm thick transparent bronze colour

tinted float glass as details etc complete for Fix Partition

Providing and laying 40 mm thick marble chips flooring rubbed

and polished (I.E.terrazo) to granolithic finish with under layer 30 mm

thick cement concrete1:2:4 (1-Cement: 2-coarse sand:4-graded

stone aggregate 10 mm and down gauge) and to player 10 mm

thick with white, black or white and blak marble cihps of required sizes

from 1 mm to 4 mm nominal size laid in cement marble powder mix

3:1 (3- Cement:1-Marble powder by weight) in proportion of 4:7

(4- Cement: 7-marble chips by volume) (C) Medium Shade

pigment with approx 50% white cement and 50% ordinary

cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or dedo

rubbed, and polished to Granolithic finish to player 6 mm white,

black or white and black marble chips of size from smallest

33 2 to 4 mm nominal size laid in cement marble powder mix 3:1 (3- 869.4 Sqm

Cement: 1 marble powder by weight) in proportion of 4:7 (4-

cement marble powder mix: 7-marble chips by volume) (B) Light

shade pigment with white cement (In top layer only)

Providing and laying white glazed tiles 6mm thick in flooring treads of

34 2 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- 908.17 Sq.M.

cement : 3-coarse sand ) finishing with flush

Providing and laying Ceramic tiles 6 mm thick in flooring treads of

35 2 steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1- 960.47 Sq.M.

cement :3-coarses and) finishing with flush pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite

Board with Computerised Golden Letters Discription as

36 2 per instructions of engg. in charge to M.S. frame structure

for Inaugaration & Public Handover Function (N.S.)

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring

treads of steps and landing laid on a bed of 12 mm thick

cement mortar 1:3 (1-cement:3-coarses and) finishing with flush

pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting

risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement: 3-coarse sand) and jointed with white cement

Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of

39 2 steps and dedo on 10 mm thick cement plaster 1:3 (1- 1523.61 Sqm

cement:3- coarse sand) and jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

40 2 cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush

pointing in white cement.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on, existing flooring by adhesive material including

41 2 dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete for antiskit

Providing and laying polished Kota stone slab flooring over 20 mm

(Average) thick base of cement mortar 1:6 (1-cement:6-coarses

and) or L.M.1.1.5 (1-Lime putty:1.5-coarses and) laid over and

jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A)

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or

43 2 L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray 2194.63 Sq.M.

cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick

Providing and laying polished Kota stone slab flooring over 20 mm

(Average) thick base of cement mortar 1:6 (1-cement:6-

44 2 coarses and) or L.M.1.1.5 laid over and jointed with grey 1085.48 Sq.M.

cement slurry including rubbing and polishing etc.complete. (B)

Providing and laying polished kota stone slab 25 mm thick in risers of

steps, skirting Dedo and pillars laid on 10 mm thick cement mortar 1:3

45 2 (1-Cement :3 coarses and) and jointed with gray cement 1176.03 Sq.M.

slury mixed with pigment to match the shade of slab including

rubbing and polishing etc.complete.

Providing and laying cement concrete flooring 1:2:4 (1-

cement: 2-coarses and:4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating coat of

neat cement. (A) 40mm thick.

Providing and laying cement concrete flooring 1:2:4 (1-

cement: 2-coarse sand:4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating coat of

neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

48 2 mortar creme out upto surface using white cement including 739.89 Sqm

rounding off junctions and extending them up to15 cm along

the wall, clearing with water and oxalic acid etc.as

Providing and laying coloured glazed tiles of the size

300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in skirting,

risers of steps and dedo on 10 mm. thick cement plaster 1:3

(1cement: 3 coarse sand) & jointed with white cement slurry.

Providing ridges or hips 600 mm overall in plain G.I. sheet class-

50 2 3 fixed with G.I. J or L Hooks and nuts 8 mm dia G.I. Limpet 635.58 Sqm

and bitumen washer complete. (1) 0.80 mm thick sheet.

Providing and fixing 150 mm wide 450 mm over all semi circular plain

G.I.sheet class-3 gutter with Iron brackets 40 mmx3 mm size Bolts,

Nuts, washers etc. including making necessary connection

with rain water pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water profing treatment

with bitumen felt consisting of second and fourth course of

blown/ bitumen or/and residual bitumen applied hot at

kg.per Sq.M.of area for each course and first course with

52 2 fibre base bitunen saturated under lay type land third course with 466.84 Sqm

fibre base self finished felt type 2 grade 1 and fifth and final

course of stone grit 6 mm and down size or pea sizes gravel

spread at 0.008 Cu.Metre/Sq.metre preparation of surface excluding

grading complete.

Providing and fixing on wall face C.I. Rain water pipe including

53 2 filling the joints with spun yarn soaked in neat cement slurry and 283.62 Rmt

cement mortar 1:2(1- Cement : 2-fine sand) (A) 75 mm dia.

Providing 15 mm thick cement plaster in single coat on

Rough (Similar) side of single or half brick walls for interior

plastering up to floor two level and finished even and smooth in

(i) Cement mortar 1:3 (1-cement :3-sand)

Providing 20mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats) over

and including a primary coat of white washing to give an even

shade after through brooming the surface to remove all dirt,

dust, mortar drops and other foreigh matter.

Removing dry or oil bound distemper by a washing

57 2 and scraping and sand papering the wall surface smooth 11.19 Sqm

including necessary repairs to scratches complete.

Distempering with dry distemper of approved brand and

manufacture (two coats) and of required shade on wall surfaces

58 2 of given an even shade, over and including a priming coat 46.94 Sqm

of whiting after thoroughly brooming the surface free from

mortar dropping and other foreign matter.

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade on wall

surfaces to give an even shade, over and including a

59 2 priming coat with distemper primer of approved brand and 76.08 Sqm

manufacture after thoroughly brushing the surface free from

mortar dropping and other foreign matter and also including

preparing the surface even and sand papered smooth.

Extra Coat for Above Item over above for every subsequent

coat of approved brand and manufacture.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

Extra over item for every sub sequent coat of wall painting with

plastic emulsion paint of approved brand

Extra over item for painting with plastic emulsion paint of approved

brand on ceilings and sloping roofs.

Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

63 2 cleaning, oil, grease, dirt and other foreign matter and 34.34 Sqm

scoured with brushes fine steel wood, scrapers and sand paper

with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint, brushing to

give an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

66 2 Extra over item for every sub sequent coat of paint. 50.4 Sqm

Painting two coats (excluding priming coat) on new steel and

other metal surface with synthetic enamel paint, brushing to give

an even shade including cleaning the surfaceofalldirt,dust and other

foreign matter.

Painting one coats (excluding priming coat) on previously

printed steel and other metal surface with synthetic enamel paint,

brushing to give an even shade including cleaning the surface

of all dirt, dust and other foreign matter.

69 2 Extra over Above item for every sub sequent coat of paint. 43.47 Sqm

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and fittings

70 2 with ready mixed bituminous brushing, black, anti corrosive to 20.16 Sqm

give an even shade including cleaning of all dirt, dustand other

foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and fittings

71 2 with ready mixed bituminous brushing, black, anti corrosive to 25.05 Sqm

give an even shade including cleaning of all dirt, dust and other

foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new wood and

wood based surface with enamel paint, interior to give an

72 2 even shade including cleaning the surface of all dirt, dust 26.78 Sqm

and other foreign matter sand papering and stopping. (a) Ready

mixed paint brushing wood primier pink.

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint, to give

73 2 an even shade including cleaning the of all dirt, dust and other foreign

matter.(b) Ready mixed paintbrushing priming for enamel

74 2 Extra over Above item for every sub sequent coat of paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new wood and wood

based surface with ready mixed paint, brushing, oil, gloss, semi

gloss to give and even shade including cleaning of all dust, dirt

and other foreign matters and papering and stopping.

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all dirt,

and remains of loose powdered materials.etc complete

Applying two coats of Birla (white cement based) or

Asian (acryliclapy-putty) or equivalent & two coats of primer of

77 2 approved brand and manufacture on new wall surface to give an 40.19 Sqm

even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered smooth.

Painting one coats (excluding priming coat) on previously painted

78 2 wood and wood based surface with enamel paint, to give an even 55.13 Sq.M.

shade including, cleaning the of all dirt, dust and other foreign matter.

Writing etter or figures on any surface with black japan paint

(stops, comas, hyphens and the like not to be measured and per letter

paid for separately) (i) Block (Letters/Figures) (Per 10 Letter pet per Cm/Ht

Demolition including stacking of serviceable materilas and

80 2 disposal of unserviceable materials with all lead and lift. (i) R.C.C. 1047.38 Cu.M.

Demolition of Brick work and stone masonry including stacking

81 2 of serviceable materil as and disposalof unserviceable materials 544.95 Cu.M.

with all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of

82 2 serviceable materil as and disposal of unserviceable materials with 47.25 Sqm

all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materil as and

disposal of unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

Dismentling steel work including distempering and stacking

84 2 the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, hold fasts

and other attachment etc. complete and stacking the material

within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,hold fasts

and other attachment etc. complete and stacking the material

with in all lead and lift.(ii) Exceeding 3 Sq.M.in area.

Dismentling barbed wire in fencing including making rolls and

also including dismentling fencing posts including all earth work

87 2 concrete in base and making good the disturbed ground stacking 66.15 Rmt

useful materials as directed and disposing as directed and

disposing of the unserviceable materials with all lead and lift.

Dismentling C.Ipipes G.S.W. pipes abd A.C. rain water pipes with

88 2 fittings and clamps including stacking the materials with all lead and 74.03 Rmt

lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and

89 2 Europe an type, flushing tank etc. including stacking the 401.63 Each

materials with all lead and lift

Scraping oil paint from steel and other metal surface and

making the surface even (with Hand Scraping.)

Removing and scraping of old deteriorated plaster of

any thickness from wall / R.C.C member including

stacking of serviceable material and disposal of unserviceable

from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and size

92 2 as specified in existing R.C.C. slab including cutting chase and 168.53 Each

Cutting out cracks of roof terrace to V-section, cleaning out,

93 2 wetting, grouting with cement and sand slurry 1:3 (1-cement 3- 64.58 Rmt

Cutting out cracks roof terrace to V-Section cleaning out and

94 2 filling solidly with a hot mixture of bitumen and clean dry 75.29 Rmt

sand (1:1 by weight)

Providing & Fixing in position Alluminium doors with frame

using approved quality anodised extruded alluminium

section as approved by Engg.in charge(Jindal alluminium)(a)

Frame sections 101.6x44.45 mm (b) Shutter bottom

vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt)

95 2 (c) Shutter bottom section at 114.3x44.45 mm at (1.37 kg/mt) 2,900.00 Sq. M.

Shutter middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing

& installing 5 mm thick approved color Acrylic sheet of

standard quality fixed with glazing chips on upper pannel &

Laminated sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as

direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly Panelled Partly

Glazed / Fully Glazed Alluminium doors with frame using

approved quality anodised extruded alluminium section as

approved by Engg. In charge.(Jindal alluminium )(a) Frame sections

101.6x44.45 mm b) Shutter vertical & top section 83.5x44.45

96 2 (wt. 1.31 kg/mt.)( at 1.31 kg/mt) © Shutter bottom section at 4,583.00 Sq.M.

114.3 x44.45mm at ( 1.37 kg/mt ) Shutter middle section at

100x44.3 wt. (1.37 kg/mt ) incl. providing & installing 5 mm thick

Glass of standaed quality fixed / 12 mm thick Laminated

sheet with glazing chips (wt. 0.13 kg/ Rmt) in panels etc. comp.

as per Detail Given & direction of engg.in charge.

Providing & Fixing in position Alluminium window 2/3/4

track sliding / fix type with frame using approved anodised

extruded alluminium section as approved by Engg. In

97 2 charge.(Jindal alluminium) units equivalent. including P/F

installing 5 mm thick clear/tinted Glass of standard quality

Providing & Fixing in position Alluminium vents with frame using

approved anodised extruded alluminium section as approved

by Engg. In charge.(Jindal alluminium) units equivalent

98 2 Frame section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt) incl.

Providing & Installing 5 mm thick Glass of standard quality

Providing and fixing of Ridge flashing for roof panel shall

be made out of 0.5 mm thick pre coated GI sheet. The Pre

coatedsheet shall be of minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992, 5-7 microns epoxy

99 2 primer on both side of the sheet and polyester top coat 15-18 510.1 Sqm

micron. The PP GI Sheet shall have plastic protective guard

film of minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members by

poprivetor self drilling/self stitching fastners @ maximum

450mm c/c along length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having 1-2

100 2 mm thickness as per directed by engineer incharge 963 Smt

etc as completed (N.S.)

Providing and laying 15mm bamboza wooden flooring as

per architect's drawing with all necessary details as

101 2 directed by the project consultants. Use underlay for better 2,690.00 Smt

result as per Detail specifications and directed by the project

consultants. (N.S.) Approved Rate )

Providing and fixing 1.20 Metre high fencing with 2.0 Metre

long M.S. Angle posts 40 mm x 40 mm x 6 mm and oil painting

coats fixed at 2.5 Mt, C/c. with five Horizontan lines and two

102 2 diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 385.4 Rmt

100 Metre, strained and fixed to posts with G.I, staples including

fixing the posts in ground with 0.5 M x 0.5.M x 0.5 M. block in C.C

1:5:10 etc complete.

Renovation and Repairing work in Chainlink fencing any size

and also refixing work incl. febrication work with all materails

103 2 to be painted one coat of primer and twocoats of paint as

directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick

over B.B. masonry in C.M, (1:6) in front and dwarf wall 1.0 Mt. high

104 2 and 23 cm. thick cement plaster to masonry / in C.M.1:3) and 2235.66 Rmt

cement concrete flooring in 1:2:4: mix 5cm.dia.drain pipe

Constructing a cooking platform 60 cm. width and 70 cm high

resting on B.B. Masonry walls 23 cm. thick in C.M. (1:6) with (i)

105 2 Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with marble chips 933.98 Rmt

set in C.M. (1:6) (6 mm thick terrazo) with plastering on

exposed faces walls in C.M. (1:4) etc complete.

Extra rate for using Ready Mix Concrete of any grade for

below ground level to vertical upto any floor with delivery & suction

106 2 Pipe & Pump etc. The rate includes fule, pump operator, skilled

labor, driver etc completed and as per direction of engineer in charge

P/A Tremix with dewartering machine and floater machine

on constructed CC work for finishing the surface as per

107 2 requirement. The rate including all machinaries, labor, loading, 54 Sq.M.

unloading, transportaion etc complete as per direction given by

engineer incharge.

Carrying out timber treatment to all wood work including drilling holes

and spraying oil based chemical solution on surface of timber work for

termite control including labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part III (1% concentration by

108 2 mass) is recommended one litre chemical emulsion diluted with 19 54.98 Smt

liters of kerosene. Total diluted concentration will be 20 liters inclusive

of 1 liter chemical emulsion application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on wood surface not protected by

paint or varnish.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by

mass) is recommended 10.5ml chemical diluted with 5 liters of water

application 0.5 litre chemical /Sqm of, surface is recommended as per

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment

including labour and material consist ment with I.S.specification.

Using Chlordene and Chior purfiles 20 EC. As Per 6131_paret-II

Consentration Weight on percentis recommended i.e one litre

EC chemical emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion appication attherate of 5 Litre

chemical /Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying with

chemical solution in oil base including labour and material Using

Chlorpyriphos 20 ECAs per IS 6313 part - II (1% concentration by

111 2 mass) is recommended i.e one litre chemical.. emulsion diluted with 37.34 Smt

19 liter oil base. Total solution will be 20 liters inclusive of one liter

chemical emulsion application at the rate of 7.5 litre chemical / Sqm of

surface is recommended as per I.S.S

Providing erecting and fixing double coated Syntex or

equivalent PVC.(ISI) water tank of required capacity each with

112 2 3.91 Litre

all necessary fittings and connection etc. complete on

Providing and fixing to wall, ceiling and floor galvanised Mild

steel tubes (Medium grade) of the following nominal bore,

tube fitting and clamps including making good the wall ceiling and

2 (F) 50mm 779.6 Rmt

Providing and laying in trenches galvanised mild steel tubes

(Midium grade) of the following nominal bore, and tube

fitting (Earth work in trenches to be measured and paid for

Making connection of galvanised Mild steel distribution branch

with galvanised mild steel main 50 mm to 80 mm nominal

bore by providing and fixing tee including cutting and threading

the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working

pressure poluthene pipes of the following out side Dia. Low

densidy, complete with special falnge compression type fittings,wall

clips etc. including making good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0 Kg.F/Cm2

working pressure polythene pipes of the following out side Dia

117 Low densidy, complete with special falnge compression type

fittings, wall clips etc. including making good the wall ceiling and

2 (C) 32mm 116.4 Rmt

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

118 2 screaed down or higned grating including cost of cutting and 600.08 Each

making good the walls and floor 100 mm inlet and 50 mm

outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian

type W.C.Pan) size 580 mm (Earth work, bed concrete, foot

rest and trap to be measured and paid for separately) (A)

Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color Vitreous

China European water closet with integral P trap of "Cera" - Clair

120 2 Series or equivalent incl. seat cover , Chair Bracket etc. complete

as per direction of engg. In charge.(N.S.)

Providing and fixing wsh down water closet (Europe an

type, W.C.Pan) with integral P or S trap including jointing the trap

121 2 with soil pipe in Cement Mortar1:1 (1- Cement:1-fine sand) 1290.8 Each

(Seal and cover to be measured and paid forseparately) (A)

vitreous China Pattern :(i) in white colour

Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or

122 2 " Hindware" incl. C.P. Brass waste coupline , waste pipe, 1,850.00 No.

pvcconnection etc. Complete.( size 635 x395x420 mm )

Providing & Fixing Angle cock of " Ess Ess" - Trend series

123 2 or equivalent standard make as approved by engg. in charge 675 No.

all complete. (N.S.)

Providing and fixing 100 mm size P or S trap for water

closet squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China.

Providing and fixing wash basin with single hole for pillar tap

with C.I.or M.S. brackets painted white including sutting holes and

125 2 making good the same but excluding fittings. (A) Vitreous 1400.18 Each

China: (ii) Flat Back wash basin 550 mm x v 400 mm size.(i) In white

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted

white including cutting holes in walls and making good the

same but excluding fittings. © Vitreous China Sink. (i) 600 mm x

450 mmx 150 mm size

Providing and fixing 600 mm x 450 mm bevelled edge mirrror

of superior glass mounted on 6 mm thick A.C. sheet or ply wood

sheet and fixing to wooden pluge with C.P. brass screws and

Providing and fixing chromium plated brass halftrun flush cock of

approved quality including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash

basin with signle hole for pillar tap of "Cera " - Concord series

of 550 x425 mm size to be fiited in stone counter with necessary

brackets painted white incl. cutting holes and making good the

129 2 same .Cost Includes P/F C.P. brass waste coupline, 32 mm dia

fisher union ,15 mm dia. Pillar cock & Angle cock of " Ess Ess"-

Trend series ,32 mm dia. Waste pipe etc. complete as per

dir. of engg. in charge.

Providing and fixing washbasin with single holefor pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making

130 2 goodthe same but excluding fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v400mm size. (i) In white colour.

Providing & Fixing S.S.304 Grade Sink of Nirali / Krishna or

131 2 Equivalent Make for Kitchen Platform of size : 24":x18" as per 4,650.00 No.

Direction of engg. In charge

Providing and fixing C.P. brass towel rail comlete with

132 2 C.P.brass brackets fixed to wooden plugs with C.P. brass 597.22 Each

scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with C.P.

133 2 brass bracket and guard rail complete mixed to wooden plug with 561.03 Each

C.P.brass screws.

134 2 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright.

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. (B)

Brass chromium plated screws down Bib Tap.

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. ©

Gun metal screw down bib tap.

2 (i) 15mm dia. 157.29 Each

2 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw down high

pressure with screws, shanks and back nuts.

2 (i) 15mm dia. 305.67 Each

2 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return fullway

2 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 201.8 Each

2 (III) 25 MM DIA 416.47 Each

2 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush cock

of approved quality including fixing in pipe line etc. complete.

2 (i) 20mm dia. 252.26 Each

2 (ii) 25mm dia. 261.16 Each

2 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved qualit including conecting the

141 2 Urinal with waste pipe, tap etc.complete. (A) White earthen ware 1026.01 Each

flat back or corner type size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush pipe.

(A) Squating plate pattern white earthen ware 550mm x

Providing and fixing chromium plated, bottle trap with

necessary couplings of approved quality for wash basin.

Providing and fixing ball cock ofapproved quality as directed. (A)

Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved quality as directed.

(B)Abonite (i) 25mm dia.

Filling with good Quality thor as and where directed by

the Architect / Engineer-in-charge, in sunk in layers of 15 cm.

146 2 thickness, including watering, ramming well etc. complete, as

directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level 15 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with solvent, including

cost of all materials.adhesive

Providing laying and jointing in true line and level 25 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 32 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 40 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 50 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing in line level plumb, fabricating and fixing three

row horizontal barbed wire fencing and punched tape concertina coil

of 9 turns per meter of 610 mm dia fixed with clips on top of the

angle iron posts. The punched tape concertina coil having sharp

barbs at every 25 mm spacing shall be 0.5 mm thick and 19 mm

151 2 width and weighting 13 kg/100 mt. (Average) as per manufacture's 390 Rmt

specification. The rate shall also include providing and

fixing 1.20 mt.total long MS angle 40 x 40 x 6 mm @3.00 mt.c/c

spacing embaded in RCC column, angle posts shall be painted with

one coats of red oxide and two coats of enamel paint of approved

quality at top compound wall.

Fixing sun film for protection sunlight in black or any colour as as

152 2 directd by engineer In Charge.(Market rate)

Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality

& Color / Pattern as per Consultant's design also includes

required fabrication structure in the grid of 2'-0x2'-0 size using

hollow pipe of16 gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen

153 2 Washers, Silicon paste application for fixing the sheet . Rate

also includesnecessary bending, cutting, labor charges , Zinc

Primer coat & Two coats of oil painting of color as approved by

consultants & making good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S.

154 2 Supporting Brackets. (N.S.)

Hiring charges for J.C.B.machine inclduing cost of fuel,

155 2 operator, dirver etc.. ( 12 hours sift day/night) (N.S.)

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor with

all tools like bucket drum, showels, trikam, pavadas, etc, to carryout

156 2 different works during monsoon for 12 Hrs. Shift. Work shall be 1,661.02 No.

carried out as per the instrucitons of Engineer In-Charge.No extra

charged shall be paid for night shift.

Roller Blind Providing and fixing Roller Blind curtain fixed on

window level on wooden batten and curtain lift with cotton thin

157 2 rope, make of aerolax or equivalent design and colour as per 3,285.00 Smt

instruction by engineer – in – Charge with necessary hardware

fitting, material and labour etc complete.

Providing & Fixing Door closer - Door closers (Heavy type of

158 2 number) Hardwire or Everite Prabhat or Equivalent

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar

bent to shape with hooked ends of R.C.C. slabs during laying incl.

painting the exposed protion of loops, all as per standard design

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete.

161 2 Making Water connection from exi.Muni. Water line (N.S.) 250 No.

Providing and applying fibere reinforced cementitious micro

concrete work in cellings and beams incl.mixture of CEMSCREED

HM (F) fair mate company material, FBR bonding agent material with

162 2 water in suItable proportion anti corrosive treatment on exposed

beam,celling steel bars with safeCore R incl.all kind of labour

etc.comp.including three coat of white wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or submarcible

163 2 water pumps withmotor and required cable and switch board of 6,800.00 Set

approved brand and make etc.comp.as directed.

.Providing TMT Bar FE 415 reinforcement for R.C.C. work including

bending, binding and placing in position complete up to floor two level

ProvidingTMTBarFE500/500Dreinforcement for R.C.C.workincluding

bending,binding and placing in position complete upto floor two level

placing in position complete upto floor two level placing in position

complete upto floor two level

Providing and fixing 30mm thick solid both side prelam PVC door

164 2 shutter (sintex door-equivalent) with necessary alluminium fitting with 2,867.00 Smt

EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building rubbish earch

165 2 manure or sludge and excavated rock and fly ash,aggregate of any 235.51 Cu.M.

kind etc.comp.upto 5 km lead.(L.S.)

Providing and laying polished granite stone slab 18 mm thick in risers

of steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1

166 2 cement:3 coarse sand) and jointed with gray cement slurry including

rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing alluminium

167 2 framing and making grove as per design and finished with royal 1,688.00 Smt

plastic paint as per instruction of engineer incharge. (N.S.)

Providing and laying 15mm bamboza wooden flooring as

per architect's drawing with all necessary details as

168 2 directed by the project consultants. Use underlay for better 2,690.00 Smt

result as per Detail specifications and directed by the project

consultants. (N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased) or Asian

(acryliclapy-putty) or equivalent & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape evenshade after

170 2 thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Providing and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross board

and face veneer or plywood face panels, with both side 1 mm

laminate finishing including anodized aluminum butt hinges with

necessary screws. Decorative type and pine wood core

anodized minimum 3 no 150 mm long aluminum butt hinges in

171 2 flush door shutters with 2 no of brass holdfast 325 mm long 1 4,686.36 Smt

no brass tower bolt 250 mm long and two no of 150 mm long brass

door handle . Decorative both side laminated Flush door 35 mm

thick. with frame of 10 cm x 7 cmt Indian teak wood frame

including all necessary fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift height up to 45 mtr from

GL etc complete as per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof

engineer in charge same as lal darwaja garden pattern consisting of

3'dia. M.S black pipe 'A' class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4

block of 9"x9"x9" size chain link jali of size 2"x2"x10 gauge fixed in

172 2 35x35x5 mm MS angle frame 8'x4' size with MS flat of size 25x3 mm 1,230.00 Rmt

welded jali etc.comp.The jali is to be welded to MS pipe with MS flat

as instruction given.The M.S pipe and the M.S angle frame are to be

painted one coat of primer and two coats of paint as directed in line

and level. (N.S)

Providing & Fixing masonary wall with porbandar lachiya stone with

well dressed grooveas per directed by engg.in charge for foundation,

plinth or super structure level (above plinth level upto floor two level)

173 in cement mortar 1:5 (1-cement : 5-fine sand) incl.pointing the joint

with white cement and yellow oxide powder in proportion to match

stone colour the joints should be thread grooved as per exi. lake

stone pitching apperance

2 (A) stone masonary wall/stone dressed single faced (size 15"x8"x9") 8,990.00 Cmt

2 (B) stone coping (size 15"x8"x4") 510 Rmt

2 (C) stone coping (size 15"x8"x9") 790 Rmt

2 (D) stone column (size 15"x15") 10,710.00 Cmt

2 (E) stone column top (size 20"x20"x9") 685 No.

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H Kerb

block for Footpath in M-20 grade using 20 mm nominal size black

trap aggregate of Sevaliya/Timbaor equivalent quality for pre-

cast blocks, reasonablyexposed finish/ formwork,mould with well

equippedwith vibratory system for kerb stones of approved design

including curing, etc complete, including thecost of formwork etc.

complete.The rate shall also include necessary cutting of asphalt,

174 2 fixing the Kerbstones in line and level on 5 cm thick sand 393 Rmt

bedding withnecessary equipments and materials. The rate shall

also include the flush pointing in CM (1:3) for all joints of

thekerbstones. Filling of zari alone the sides of the kerbstone fixed

with Bituminous concrete Bituminousconcrete / C.C. mixed in proper

position to flush withthe road surface as directed by Engineer in

change to form a portable mixture.a) Laying on 5 cm thick Sand

Providing and Laying of Rubber Moulded Paver Block Grey/Coloured

60 mm thick, M-35 Grade of any size shape (Usually Uni-Paver

Blocks) using black trap good quality aggragate of 20 mm nominal

size for footpath,parking areas, service lanes and other areas as

mentioned in the drawing / instruction of engineer in charge. Cost

includes formworks using rubber mould, Rate providing and laying

paver blocks as per required grading and specification. The paver

block shall be mechanically compacted. The work of paving blocks

175 2 shall be executed in line and level by skill mason of flooring work only.

It should be laid in such a way that the no cutting of the paver block to

be necessary. if cutting of paver block necessary then it should be cut

by machine only and carting. The finished surface of the paver block

shall have resonably good, plain finished. Paver blocks shall be

compacted and shall be relaid if necessary. Gravel or such type of

materials shall not be allowed for production. Laying on 5 cms thick

Provoding and fixing flush door shutters, solid core construction with

frame of first class hard wood with cross board and face veneer or ply

wood face panels, including anodised alluminium butt hinges with

176 2 necessary screws. (B) Non- decorative type and block board core 1779.97 Smt

anodised alluminium butt hinges in flush door shutters (2) 35 mm

thick. Labour work for fixing any kind of paving with cement pointing in

CM 1:2, including watering, ramming etc comp. as dir.For pavement

I) Laying on Sand bedding as per requirement to fix the C.C.Block /

177 2 Nibhada Stone in Line & Level

Box type metal letters forming composite box made from 1mm thick

stainless steel plate of grade 304 having brush finish of following font

size to be fixed at Main Gate in english and or Gujrati and including

fixing charges approved before fixing by clent / consultant.

A 2 400mm high 1,000.00 Nos.

B 2 300 mm high 750 Nos.

C 2 230 mm high 565 Nos.

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle cleats of size

25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

mm centre to centre, one flange fixed to the ceiling with dash fastener

12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with

nuts & bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of

1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, Engineer incharge, manufacture’s specification and

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow) 350 x

500 x 50 mm, Size per color End Cape 350 MM x 175 MM x 50 MM

TOP DESIGN - Lining Top flat ANTI SKID PATTERN FOR GRIP

COLOUR :- YELLOW & BLACK BODY MATERIAL :- MODIFIED

180 2 THERMOPLASTICS (Polymer Rubberized ) • ECO FRIENDLY 2,185.00 Rmt.

RECYCLE RUBBER Packing :- 4 pcs/ woven Bag Load Capacity :-

20 MT Fitting ( Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE

HEX Bolts with Washer Epoxy for Bolt Fitting etc. complete as

directed by EIC .

Providing and fixing of Roller blind curtain/blackout. The fabric shall

be woven from formulated platisol extruded over a polyaster yarn.The

181 2 fabric shouldl be weaved to provide subtle view of the side of the blind 2,610.00 Smt

and should offer elimination of glare and sunlight radiance upto a

minimum of 80%.The fabric shall be flame retardant.

Providing and fixing PVC/Gpsysum plain colour false ceiling with

grid type with aluminium frame from gypsteel, fastners ,props,

Finishing as per architectural drawing allowing openings for A.C.

182 2 Diffusers, Light/Electrical Points etc –complete, Prior to fixing on

frame.(Brand:Anutone or equivalent ) (N.S.) or as directd by engineer

Provdg. & laying S.W. Gully trap with brick masonry chamber & water

183 2 tight G.T.Stone including fixing of covervSquare mouth trap 100 mm 1,263.15 No.

x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin cement

mortar 1:1 including neat cement finishing, waterin getc. complete.

Providing and laying (to level or slopes) and jointing with stiff mixture

185 2 of Cement Mortar in proportion 1:1 Salt glazed stoneware pipes 211.05 Rmt.

including testing of pipes and joints complete.(A) 100mm dia.

Providing and laying (to level or slopes) and jointing with stiff mixture

186 2 of Cement Mortar in proportion 1:1 Salt glazed stoneware pipes 288.23 Rmt.

including testing of pipes and joints complete.(B) 150mm dia.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

187 2 (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded 2903.89 Each

stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and 450mm deep for single pipe

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

188 2 (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded 3624.51 Each

stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(i)Inside

dimensions 500mm x 700 mm and 450mm deep for pipe line with one

Providing, supplying and fixing precast C.C. blocks (M-20) edge kerb

having size of 75 x 300 x 300 mm depth and as per design conveying

189 2 it to the site, jointing into C:M 1:3 and racking out the joints incl.

necessary excavation of asphalt, soil etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and 70 cm

high resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii)

190 8 Fixing black Granitee 30mm thick laid on precast R.C.C. (1:2:4) slab

with plastering on exposed faces of wall in C.M. (1:4) etc complete

Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh

191 8 or weight not less than 7.75 kg. per Sq.M. to window frames etc. 754.65 Smt

including60 x 20mm beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with nails & then

192 8 application of 15 mm plaster on R.C.C.& masonary joints as per dir.of 35 Rmt.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in

193 8 one layer and finished with a floating coat of neat cement. (A) 50mm

Providing and constructing, Underground (U/G) water tank of

specified capacity, on specified location, for all depths, in controlled

CC of M-200 grade with bottom slab, top slab and RCC walls,

including cost of form work and reinforcement, with inside and outside

194 5 plaster in CM 1 :3 and water proofing treatment as per IWP 6.5 Litre

specification, including injection, grouting, etc. complete. The rate

includes for providing and fixing two nos. 0.6m. x 0.6 m. size medium

duty CI manhole cover/s at top, including wash out pipe line and inlet

and outlet connections etc. complete.

Providing and fixing PVC Printed pain colour false ceiling with grid

type with alluminium frame consisting of 600mm x 600mm 3mm thick

plain PVC sheet used as panel insert in a frame work made using

anodized alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge or

1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm)

195 5 The alluminium frame work is supported from the cceiling with the 300.12 Smt

help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to

maintain proper level etc. The aluminium frame work is supported on

side wall with the use of alluminium L section of size 1 x1 (25 x

25mm) angles etc. complete as per direction of Engineer in charge.

Manufactures specification and drawing.

Providing and supplying of labour for necessary manual excavation,

cleaning, Shifting of Material Or any other, or for any other work as

196 5 directed by Engineer In charge. The Rate includes Handcart with

A 5 Mukadam/supervisior/karigar 425 No

B 5 Fitter/Plumber/Mason 697 No

C 5 WELDER/ Gas cutter at Day /night 689 No

Supplting of welding machine / gas cutter including cost of welding

D 5 rods/gas, Transportation, including carting from site to work place.

E 5 Mazdoor at Day Female 450 No's

E 5 Mazdoor at Day Male 493 No's

Supplying electric breaker machine for RCC slab or asphalt

demolishing work on site by using operator, fuel, power supply

etc.complete as directed. (no payment should be allowed for non

197 5 working condition of machinery and for pipe line excavation and M.H.

work. Allowed only for break down work) (Based on Previously

approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

198 seal for potable water of following dia. Nominal bore tube fittings and

clamps including making good the wall, ceiling and floor etc.

A 2 15 MM DIA 165.21 Rmt

B 2 20 MM DIA 202.97 Rmt

C 2 25 MM DIA 247.25 Rmt

D 2 32 MM DIA 330.36 Rmt

E 2 40 MM DIA 437.66 Rmt

199 2 50 MM DIA 647.3 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without frame for

200 2 Gulley trap (Standard pattern) te weight of cover to be not less 4.53 491.8 Each

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working

pressure polythene pipes of the following out side Dia Low densidy,

201 complete with special falnge compression type fittings, wall clips

etc. including making good the wall ceiling and floor.

Filling available excavated earth(excluding rock) in trenches. plinth,

202 15 sides of foundations etc. in layers not exceeding 20 cm. in depth 129.1 cumt

consolidating each disposited layer by ramming and watering.

Filling in plinth with sand under floors including watering ramming,

203 2 consolidating and dressing complete

Filling in foundation and plinth with murrum or selected soil in layers of

204 3 20cm. thickness including watering, ramming and consolidating etc. 286.2 cumt

Filling in Sunken Portion with good Quality Aerated light weight

concrete block having crushing strength not less than 35 kg/sqcm and

205 2 where directed by the Architect / Engineer-incharge, in sunk in layer. 4559.61 cumt

including watering, ramming where it is required etc. complete, as

directed by the Architect / Engineer-in-charge .

Providing and applying fibre reinforced elastomeric liquid water

proofing membrane with resilient acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top of concrete roof in three coats

@10.76 litre/ 10 sqm. One coat of self-priming of elastomeric

waterproofing liquid (dilution with water in the ratio of 3:1) and two

206 1 coats of undiluted elastomeric waterproofing liquid (dry film thickness

of complete application/system not less than 500 microns). The

operation shall be carried out after scrapping and properly cleaning

the surface to remove loose particles with wire brushes, complete in

all respect as per the direction of Engineer-in- Charge.

Providing and laying integral cement based water proofing treatment

207 1.392 including preparation of surface as required for treatment of roofs, 1150.48 sq mt

balconies, terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with water proofing compound conforming to IS.

2645 and approved by Engineer-in-charge over the RCC slab

including adjoining walls upto 300 mm height including cleaning the

surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm

to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse

sand) admixed with water proofing compound conforming to IS :

and approved by Engineer-in-charge over 20 mm thick layer of

cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with

water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding of junctions of

walls and slabs.

(c) After two days of proper curing applying a second coat of cement

slurry using 2.75 kg/ sqm of cement admixed with water proofing

compound conforming to IS : 2645 and approved by Engineerin-

(d) Finishing the surface with 20 mm thick jointless cement mortar of

mix 1:4 (1 cement :4 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineerin-

(e) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test.“All above

operations to be done in order and as directed and specified by the

Engineer-in-Charge :and shall be guaranteed for minimum period of

10 years after handing over the completed building by the main

contractor to be finished as directed. Stamp paper guarantee 10 years

to be furnished before receiving any payment from the client.

With average thickness of 120 mm and minimum thickness at khurra

Rapairing of Auditorium Chair . It Including material charges and

208 20.00 Labour Charges For Erection And Fixing Spring for smooth and easy 523.00 No

pushback system.

Supply and Fixing of Auditorium seating Fabricate Auditorium seating

with Synchronized Push back Chair with Ergonomically designed Poly

Urethane foam for seat and back made my DOW chemical with High

Pressure moulding technology to achieve long life performance,

upholstered with stitched 3 Layer 100% Yarn Dyed fabric

Upholsteries. Chair profile with the seat in Normal position and without

a tablet arm should not be more than 75 cm. Chair pushback

mechanism should consist of 2 nos. x DIA 50 mm ZYTEL Based

Rollers which is supported by AXIAL shaft of DIA 12 mm is Driven by

radial movement of 4 set of Swing Arms of size 25mm x 6 mm

209 1.00 thickness with Orbital Riveted Solid Dia 8 mm Barrel MS Rivets. The 9990.00 No

pushback movement is achieved by synchronised movement of

links mounted on Two Number of triangular Symmetrical housing of

size 27 cm x 23 cm duly embossed for extra strength by 1.2 cm made

up by 0.12 cm CRCA compliance to IS 513. The entire mechanism

should be made in India and should have total weight 8.5 kg duly

Powder Coated – NO SPREAY PAINT Part should be used for the

chair of The Seat Size should be 42 cm x 48 cm the Back height

should be 70 cm with ergonomically designed seat and back

cushions. Chair should be available in 20”, 21”, 22” and 23” to use

multiple seat size in one layout for matching variable arch length.