SJMMSVY Janbhagidari Grant (2025–26).

NAME OF WORK :Construction of Cement Concrete (C.C.) Road and Fixing of Electric Poles at

Various Locations in Deesa Nagarpalika Area, Deesa, District: Banaskantha, under SJMMSVY

Janbhagidari Grant (2025–26).

Name of Work: Construction of Cement Concrete MAIN ROAD FROM SHRI-i RESIDENCY TO ARBUDA GALAXY

TO OMVILLA CONNECT WITH SERVICE ROAD ON DEESA - PALANPUR HIGHWAY for Deesa Nagar Palika

Name of Work: Construction of Cement Concrete Road FROM SHALIGRAM ROAD TO GANPATBHAI MAFABHAI

DESAI'S HOUSE for Deesa Nagar Palika

Name of Work: Construction of Cement Concrete Road FROM GANPATBHAI MAFABHAI DESAI'S HOUSE TO

ISHVARBHAI NATHUBHAI 'S HOUSE for Deesa Nagar Palika

Name of Work: Construction of Cement Concrete Road FROM ISHVARBHAI NATHUBHAI 'S HOUSE TO RANPUR

ROAD for Deesa Nagar Palika

Description Quantity Rate Per Amount

Demolition and disposal of unserviceable materials with all lead

and lift.(ii) Unreinforced cement concrete

Box cutting the road surface to proper slope and camber for

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed

Providing and laying cement concrete 1:4:8 (1- Cement : 4-

Coarse sand : 8- crushed stone aggregates 40 mm nominal

size) and curing complete including cost of formwork in (A)

Foundation and Plinth

Providing and laying in position Ready Mixed M-200 grade

concrete for reinforced cement conctere work

using cement content as per approved Design Mix

manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to

kms having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, excluding the cost of

4 centering shuttering finishing and reinforcement including cost 359.60 5548.36 Cmt

of admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability

without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained) and C.C. Road Including

Compaction and finishing by trimix process including providing

Construction Contraction and expansion joint and filling in

joints with bitumen etc. completed as directed by engineer in

Raising Brick Masnoary chamber (Inside dimension 600 mm x

850 mm) as per requirment including removal and re fitting of

4A chamber with heavy duty frame & cover at proposed road level 81.00 3727.20 NOS

including all material and labour charges as per instruction

given by in charge enginneer.

Providing and supplying standard length ISI mark rigid

unplasticized PVC pipes suitable for potable water with ring fit

joint including cost of rings as per IS specification no

4B /1988 including all local and central taxes and transportation 250.00 199.00 Rmt

freight charges inspection charges , loading , unloading

conveyance to departmental store and including cost of jointing

material etc. 6 kg/cm2 4) 110 mm

Construction Brick Masnoary chamber (Inner dimension

mm x 450 mm) as per requirment including removal and re

5 fitting of chamber with heavy duty frame & cover at proposed 2.00 3968.26 NOS

road level including all material and labour charges as per

instruction given by in charge enginneer.

Description Quantity Rate Per Amount

Conveyance of materials (A) Lime ,murrum,building

6 rubbish,earth,manure or sludge & execavated rock and rubbish 2753.15 61.32 Cmt

(1) Lime, murrum, building rubbish.upto 3 km

Providing and laying in position Ready Mixed M-250 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying, excluding the cost

of centering shuttering finishing and reinforcement including

7 cost of admixtures in recommended proportions as per IS: 543.00 5621.13 Cmt

9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained)and C.C.

Road Including Compaction and finishing by trimix process

including providing Construction Contraction and expansion

joint and filling in joints with bitumen etc. completed as directed

by engineer in charge.

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as per

8 approved design Confirming to IS 15658 : 2006 including 35 1629.00 701.90 Smt

mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-2018 etc.

Providing and casting in situ controlled cement concrete M-200

9 for Kerb/ kerb blocks including formwork curing and finishing, 229.64 4709.64 Cmt

Distempeing (Two coats) with oil bound washable distemper of

approved brand and manufacture and of required shade on

wall surfaces to give an even shade, over and including a

10 priming coat with alkali resistance primer of approved brand 1086.00 75.50 Smt

after thoroughly brushing the surface and other foreign matter

and also including preparing the surface even and sand

parpered smooth.

Cat Eye / Road Stud / RPM: Supplying Raised Pavement

Markers made of polycarbonate and ABS moulded body and

reflective panels with Micro prismatic lens (No Glass bead

lens) capable of providing total internal reflection of the light

entering the lens face and shall support a load of 13635 kgs.

tested in accordance to ASTM D 4280 Type H and complying

to Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 Ð DO III Dt 11.06. 1997. The height,

11 width and length shall not exceed 20 mm, 130 mm and 130 651.60 217.40 Nos.

mm and with minimum reflective area of 13 Sqcm on each side

and the slope to the base shall be 35 +/- 5 degree. The body of

the marker should having finger grip for easy and accurate

placement and application with epoxy / bituminous Adhesive as

recommended by the manufacturer of the marker. The color of

the marker should be as per the IRC 35-2015 and as directed

by Engineer-in-charge.

Description Quantity Rate Per Amount

Road marking with hot applied thermoplastic paints with

reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass beds

as per IRC:35-2015. The finished surface to be level, uniform

and free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color marking

should provide liminance coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as mentioned in

the section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

Providing and Displaying Foxtail palm well developed with

fresh & healthy foliage of ht.

to 240 cm in big 40 cm Cement Pot as per direction of the

officer-in-charge.

Providing and stacking of Thevetia nerifolia of height 60-75

14 cm. with 5-6 branches in poly bags of size 25 cm as per 363.00 45.45 Nos.

direction of the officer-in-charge.

Supplying & erecting decoratives street lights with mild steel

m height and 4 mm thk. round poles with dual arms brackets,

mounting plate,base plate and inbuilt connection/terminal box.

15 Pole should be P.u. paint. and pole should be weight of 130 to 27.00 26260.00 Nos.

145 kg.The pole shall be rust proof, weather proof, corrosion

resistant with 1 year warrenty

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S. angles,

flats, bars, channels, sections complete with cutting, welding,

16 grinding & finishing duly painted with one coat of red oxide 270.00 77.77 Kg.

with erection on site as per direction of engineer in charge with

necessary grouting, cementing, plastering & finishing complete.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables, (c) 4 core 10 Sq. mm,

Supplying and erecting Flexible PVC insulted multistrand

kv grade ISI marked copper wires of following size to be

erected as directed.For Mains 1.50 Sq.mt 3 core round PVC

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

cables. (d) 2 to 4 core 10 Sq. mm,

Pipe type earthing having 150 cms. long and 2.5 cms. dia.

galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

For using sa;t and charcoal / coke as required for pipe type

Providing and erecting HOT deep Galvanised iron strip wire

"B" class Galvanised iron pipe having smooth finished bore of

the pipe on both ends erected nuts and bolts along the pole /

wall shaping the pipe as per site required. Pipe dia as following

Description Quantity Rate Per Amount

making trench in Hard Murrum / Tar Road of suitable width of

90 cms. or depth for laying any size of cable or locating the

fault all over the run and normal ground.(B) if additional

machineries like hammer driller or JCB use[Add],

Providing and erecting cable clamp of 25 mm X 3 mm M.S flat

25 suitable for fixing 2 Nos. of armoured cable with nuts and bolts, 54.00 112.11 Nos.

(c) for 140 mm dia Pole.

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 60 X 60 X

cms. Deep in below ground level with plinth of 45 cms X

cms (or 45 cms dia X 45 cms) high upper ground level with

necessary curing and finishing in approved manner.( for 7.5 &

8/8.5 mtr pole)

Providing and erecting Miniature circuit breaker single pole 6A

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark , Cat.III,

Supplying & erecting approved make time switch with single

pole airbreak contacts suitable for 230 V.15/16A.complete with

self starting motor driven clock ‘ON’ &’ OFF’ automatic

arrangement at any predetermined time during each

hours,With nickel cadmium rechargeable battery backup

erected as directed.

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity (A) 6 to

Supplying & erecting power contactor for time switch complete

30 erected as per direction Cat III 27.00 1883.65 Nos.

[B] 2 pole 250V 32 Amp.

Total Amount Rs.

Total Amount Rs.