Development of Teliamura pedestrian street near Teliamura Market Area under the Scheme for Special Assistance to States for Capital Investment 2024 25

Dismantling Work Removal of Telephone/ Electric Poles and Lines Removal of telephone / electric poles with wires including excavation and dismantling of foundation concrete and lines under supervision of the concerned department, disposal with all lifts and up to a lead of 1000 m, staking of serviceable and unserviceable materials separately as per MoRD Technical Specifications, clause 202

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding whenever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and upto a lead of 1000 m as per MoRD Technical Specification Clause 202. Dismantling Lime / cement Concrete (I) By Manual Means B)Cement Concrete

C)Reinforced Cement Concrete

Cutting of Trees, including Cutting of Trunks , Branches and Removal of Stumps Cutting of trees, including cutting of trunks , branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts and lead upto 1000 m as per MoRT&H Technical Specification Clause 201. B) Lead upto 1000 m (I) Girth above 300 mm to 600 mm

(II) Girth above 600 mm to 900 mm

(III) Girth above 900 mm to 1800 mm

Dismantling of Cement Concrete Pavements as per MoRT&H Technical Specification Clause 202 Dismantling of cement concrete pavements by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials with all lifts and upto a lead of 1000 m, stacking serviceable materials and unserviceable materials separately as per MoRT&H Technical Specification Clause 202. (B) upto partial depth of concrete

Dismantling of Brick soling Dismantling of brick soling, stacking serviceable materials and unserviceable materials separately with all lifts and upto a lead of 500 m by manual means as per MoRD Technical Specification Clause 202.

Taking out existing CC interlocking paver blocks Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Signage Work Retro-reflectorised Traffic Signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade shetting vide MoRT&H technical specification Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRT&H Technical Specification Clause 801. (iii) with 600 mm circular

Direction and Place Identification Signs upto 0.9 sqm Size Board. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRT&H Technical Specification Clause 801.

Street Lighting Providing and erecting street light mounted on a steel circular hollow pole of standard specifications for street lighting, 9 m high spaced 40 m apart, 1.8 m overhang on both sides if fixed in the median and on one side if fixed on the footpath, fitted with sodium vapour lamp and fixed firmly in concrete foundation. For fixing in Footpath

Interlocking Concrete Tiles (Used as footpath) Earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 m² on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc, in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. All kinds of soil (i)For Parking

(ii)For Driveway

(iii)For Pathway

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site , spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per MoRT&H Technical Specification clauses of section 300

Granular Sub-base with Well Graded Material (Table 400.1 (A) By Mix in Place Method Construction of granular sub-base by providing well graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRT&H Technical Specification Clause 401. (i) For Grading I Material

Water Bound Macadam Sub-Base / Base Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller/ vibratory roller in stages to proper grade and camber, applying and brooming, stone screening and binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MoRT&H Technical Specification Clause 404. 1) WBM Grading I (A) By Manual Means

3) WBM Grading III (A) By Manual Means

Plain/reinforced cement concrete in sub-structure complete including formwork as per drawings & MoRT&H technical specification Clauses 1500, 1700, 2200. (including centering, shuttering, staging etc. but excluding reinforcement) PCC M 15 Grade ( upto 5 m height ) Below Paver Block area

RCC M 30 Grade a. Upto 5m height Case - I : Using Concrete Mixer

Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in substructure complete as per drawings & MoRT&H technical specification Clauses 1600, 2200.

60 mm thick factory made c.c. interlocking paver block of M-35 Grade Providing and laying factory made coloured chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per specifications & approval/ direction of Engineer-in-Charge. (a) 60 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.

80 mm thick factory made c.c. interlocking paver block of M-35 Grade Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.

Kerb Stone Cast in Situ Cement Concrete M 25 Kerb. Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete inposition to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-Charge (length of finished kerb edging shall be measured for payment). (Precast c.c. kerb stone shall be approved by Engineer-in-Charge).

Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New Work Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and MoRD Technical Specification Clause 1702.

Horticulture work (Refer Annexure-I)

Supply at site of work well decayed farm yard manure, Supply at site of work well decayed farm yard manure, from any available source, approved by the engineer in charge including screening and stacking.

Spreading of sludge / farm yard manure / good earth in required thickness (cost of sludge, farm yard manure or/and good earth to be paid for separately) as per MoRTH Technical Specification Clause: 307

Turfing lawn with fine grassing including ploughing, dressing including breaking of clods, removal of rubbish and supplying doob grass roots at 10 cm apart, including supplying and spreading farm yard manure at the rate of 0.6 m³/100 m²

Planting of trees by the road side (avenue trees) in 0.60 m diameter holes, 1.0 m deep, dug in the ground, mixing the soil with decayed farm yard / sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

Providing and fixing tree guard, 0.60 m square, 2.0 m high, fabricated with MS angle iron, 30 mm × 30 mm × 3 mm, MS iron, 25 mm × 3 mm and steel wire, 3 mm diameter, welded and fabricated as per design in two halves bolted together

Outdoor Dustbin Supply The pole-mounted outdoor dustbin consists of two 120-liter HDPE trapezoidal bins (green and blue) mounted on a central mild steel pole (IS 2062, powder-coated). Each bin has 2 mm wall thickness, UV resistance, and no lid. The pole has 30 mm diameter with 3 mm thickness. Solid, non-perforated bins are provided with complete installation accessories and a 1-year warranty.

Decorative Lighting Pole of Mild Steel with Dual Arm 3-meter conical mild steel pole with dual downward arms (901–1000 mm), galvanized and PU-painted in black. Includes base plate, mounting accessories, and inbuilt terminal box. Pole thickness 2–4 mm, rust- and weather-proof, with top diameter 50–60 mm and base diameter 351–400 mm.

CCTV Work with following specification & installation charges (i) IP Camera-17 Nos. PT-NC340P1-N(D2)(4MP IP Bullet, 30 MTR IR, NVR(1 No) , NVR 32 Ch 2 SATA AI Sence 55 inch TV(i No), BE55D, Smart 4K/uhd, OTT AND web browser built inn 16x7 Warranty 3 years full on site Installation free with kit Installatin free with kit Poe Swich(4 Nos.), 8 Port Poe Swich Cat 6 Armourd Cable, Cat 6 Cable armourd outdoor-440 Nos, Fibre Cable-700 Nos., HDD-4TB-1 No. SFP-2 No.(SFP Madul)-1 No. Patch Cord-LC Fibre Patch Cord 1.5 MTR-1 No.

Outdoor LED Display Boards

Gully Pit (600mm x 600mm) with following details& specifications Wrought Iron and Mild Steel Welded Work Wrought iron and mild steel welded work (using angles, square bars, tees and channel in grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately as per MoRT&H technical specifications Clauses and as directed.-1 No & Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. etc. complete as per direction of Engineer-in-charge. 11.58.2 100mm-20 Nos.

Please Enable Macros to View BoQ information