REPAIRS TO JOINERY, ANTI-TERMITE TREATMENT AND CERTAIN B/R WORKS IN NORTH SIDE OF RUNWAY AT AF STN JODHPUR, SALAWAS AND KAILANA

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.

Taking down shutters of any description not exceeding 1 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.

Material and labour for resecuring or easing & adjusting without taking down the shutter of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified & directed by the Engineer-in-Charge.

Material and labour for resecuring or easing & adjusting without taking down the shutter of any description not exceeding 1 sqm each complete all as specified & directed by the Engineer-in-Charge.

Material & labour for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe 410-W (GdeE- 250) quality-A complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed by the Engineer-in-Charge.

Material & labour for PCC 1:2:4 type B1 (using 12.5 mm graded stone aggregate) as in bed blocks etc for embedding hold fasts complete all as specified and directed by Engineer-in-Charge

Material & labour for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge

Supply & fixing Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

Supplying & fixing Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm coloured PVC Sheet on back face, and fixing in opening complete all as specified, shown in product drawing and as directed by the Engineer-in-Charge.

Supply & fixing 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), fitted to chowkats complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Second class hard wood plain, solid, straight chowkhat and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on one sides and decorative on other side all as specified and for 0.90 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved addhesive as per maker's instructions complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on one sides and decorative on other side complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Second class hardwood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads, sectional area exceeding 3 Sqcm and not exceeding 6 sqcm complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing stainless steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staples complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs galvanized mild steel wire cloth of 0.56 mm nominal dia of wire and 1.18mm average width of aperature and fixed with beading tinned tacks or galvanized wire staples in steel/wooden window/door fixed with nails/welding complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing stainless steel butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs mild steel butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 125mm stainless steel hasp and staple of safety type with mild steel hinge pin including bolt of hinge plate and fixed with screws complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 150 mm long stainless steel, barrel tower bolts of extruded section and fixed (ISI Marked) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 100 mm long stainless steel, barrel tower bolts of extruded section and fixed (ISI Marked) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 250 mm long stainless steel, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy (ISI Marked) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing stainless steel handles, fabricated type, anodized of size 150 mm (ISI Marked) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing stainless steel handles, fabricated type, anodized of size 100 mm (ISI Marked) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 300 mm, mild steel, ordinary helical springs including roller and roller plate complete complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised, Width of flaps (whenbopen) not less than 30mm, complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing factory made Box type Ventilators (primer coated), ERW Box made from 1.25 mm thick CRC sheet, & ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gauge and glass shutter comprised gauged, glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanteled portion with PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter , including dismantling & taking down the old unserviceable window :- (a) MS Hold fast, 150 mm long of 12mmX3mm made to shape 04 nos per ventilator (b) MS handle of Z section 20mmX25mm, 100 mm long -01 no per leaf (c) Stainless steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm,100 mm long stopper -01 nos per leaf (e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf (f) MS Box type hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directed NOTE :- During fixing of ventilator surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement .

Supply & fixing factory made Box Type Steel windows (primer coated), ERW Box made from 1.25 mm thick CRC sheet, & ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gauge and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanteled portion in PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter, including dismantling & taking down the old unserviceable window :- (a) Hold fast, 150 mmlong of 12mmX3mm made to shape 04 nos per window (b) handle of Z section 20mmX25mm, 100 mm long -01 per leaf (c) stainless steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf (e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf (f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directed. NOTE :- (i) During fixing of window surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement.

Supply & fixing Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed by the Engineer-in-Charge.

Material & labour for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer of same make of paint complete all as specified & directed by the Engineer-in-Charge.

Material & labour for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint one coat of wood primer of same make of paint complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing of 150 mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 40 mm dia cupboard knobs fixed with nut screw and washer of mild steel bright bolt complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in repairs of 150 mm aluminium handles cast type anodised complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in repairs of 300 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed by the Engineer-in-Charge.

Material & labour for welding in repairs not exceeding 2.5 cm in length, thickness of metal to be welded not exceeding 6 mm complete all as specified & directed by the Engineer-in-Charge.

Dismantling of boarding any description fixed in any position with nails complete all as specified & directed by the Engineer-in-Charge.

Dismatling floor hearth or wall tiling including cement mortor bedding but not backing removing serviceable tiles to store and rubbish off the premise complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Glazed ceramic tiles, coloured, in vertical surfaces 300mm x 200mm x 7mm thick, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Aluminium Anodized powder coated (Thickness of powder coating is 50 micron) aluminium frame for doors , windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs anodised aluminium door shutters, powder coated (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs anodised aluminium window shutters, powder coated of any colour (Thickness of powder coating not less than 50 micron), window and ventilator shutter side hung type without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 5.5 mm thick froasted glass panes and glazing with oil putty or fix in aluminium door / widnow complete all as specified & directed by the Engineer-in-Charge.

Material & labour for repairs to Aluminium doors exceeding 1.50 Sqm but not exceeding 5.00 Sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading screw etc including chowkhat and refix in the same opening after complete repair except glass complete all as specified & directed by the Engineer-in-Charge.

Material & labour for repairs to aluminium doors not exceeding 1.50 sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading scrw etc and refix in the same opening after complete repair except glass complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in repairs Aluminium (extruded) body Door closer hydraulically regulated, designation No 1, universal type, suitable for door shutters upto 700 mm in width & of weight not more than 35 kg complete all as specified and as directed by Engr-in-Charge .

Supply & fixing 18 mm solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screw and solvent cement/adhessive as in Cup boards/kitchen rack box /Kitchen cup boards complete all as specified and directed by Engineer-in-charge.

Supply & fixing 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive as in partitions of Cup boards/kitchen rack box /Kitchen cup boards complete all as specified and directed by Engineer-in-charge.

Supply & fixing 12 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive as in Cup boards/kitchen racks box /Kitchen cup boards complete all as specified and directed by Engineer-in-charge.

Supply & fixing in repairs 8 mm thick sheet glass shelf assembly with Stainless steel backets as approved of size not exceeding 0.25 Sqm complete all as specified and directed by Engineer-in-charge.

Supply & fixing brass Locks for cupboard/Glass doors, grade I, size 50mm complete all as specified and directed by Engineer-in-charge.

Supply & fixing magnetic catcher for Wardrobe, Cub-boards Etc complete all as specified and directed by Engineer-in-charge.

Supply & fixing sliding channels for holding glasses in wardrobes complete all as specified and directed by Engineer-in-charge.

Supply & fixing stainless steel Pivot hinge of size not exceeding 75 mm for glass doors complete all as specified and directed by Engineer-in-charge.

Supply & fixing in repairs double action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified & directed by the Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing mild steel work Fe-410 (Gde-E-250) quality -A in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Pre- painted galvalume GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Pre- painted galvalume GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,including dismantling and taking down the old unserviceable sheet complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Mild steel, plain black sheet 0.8 mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified & directed by the Engineer-in-Charge.

Demolition of cement concrete (Unreinforced) in ground floor & paving not exceeding 15 cm thick (below or above ground level) complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 100 mm thick,PCC 1:4:8, type D-2, (using 40 mm graded crushed stone aggregate), as in sub base or flooring complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/rectangular) of size not less than 300mm x 300mm as in parking /hardstanding etc including set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Cement concrete Type B-2, 1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and as directed by Engr-in-Charge .

Material and labour for providing and injecting Along the external wall in plinth protection using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed by Engr-in-Charge .

Material and labour at points of contact of wood work by chemical emulsion @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and as directed by Engr-in-Charge .

Material and labour treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and as directed by Engr-in-Charge .

Material & labour for Venetian blinds, vertical type, 100 mm wide with polyster fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons / loops etc fixed cuttings and alteration if necessary whereever AC/ coolers exists including dismantling old unserviciale venetian blinds complete all as specified and as directed by Engr-in-Charge .

Supply and fixing in repairs 7mm thick aluminium grill of make ' Deco grill DG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as specified and as directed by Engr-in-Charge .

Supply and fixing in repairs stainless steel curtain rod of dia 20-25 mm complete all as specified and as directed by Engr-in-Charge .

Supply and fixing Stainless steel bracket for holding curtain rodes of dia 20-25 mm complete all as specified and as directed by Engr-in-Charge .

Supply and fixing in repairs brass mortice lock vertical type of size 100 mm complete all as specified and as directed by Engr-in-Charge .

Supply and fixing in repairs 3mm thick coloured Aluminium Composite Panel (ACP) as in wall cladding; with and including necessary frame work (minimum size of framed panel 900mm x 1200mm) made of mild steel pipe 2" X 1" of wall thickness 16gauge, MS frame fixed to walls, pillars, columns with necessary fasteners, screws, rawl plugs, anchor bolts etc and sealed the Aluminium Composite Panel (ACP) with silicon of 789 code & also with 3M tape where required complete all as specified and as directed by Engr-in-Charge . Note :- Quoted rate shall be deemed to be included for work buildings/ structure of any height.

Dismantling / taking down old existing unserviceable cement plaster, loose/unsound weaken cement concrete of any description and in any position from existing external/internal surfaces of RCC slab/RCC beam RCC columns/RCC lintles / RCC fascia/RCC chajjs etc with power driven pneumatic chisel (upto maximum height 10 metres from natural ground level) and including removal of debris outside MoD land complete all as specified & directed by the Engineer-in-Charge.

Material and labour for removing of cavities roughening the smooth surface scrapping out/removing corrosion all loose/scale/rust etc from the visible reinforcement by applying rust remover @ 200 ml per sqm or as per manufacturer's instructions, rust removal and cleaning the steel reinforcement properly and then applying 40 micron thick dry thickness coat of epoxy zinc rich primer @ 250ml per sqm or as per manufacturer's insturctions of exposed and new steel reinforcement (measured flat) complete all as specified and as directed by Engr-in-Charge.

Material and labour for providing and filling the epoxy putty into RCC crack after opening the RCC crack in V groove manner approximate 10 mm vide and 10 mm deep using mechanical cutter properly cleaning the same to remove the loose dust dirt etc and finishing in line and level with existing concrete surfaces etc complete all as per manufacturer's instructions and procedures as directed by Engr in charge.

Material and labour for applying two coats of epoxy based two component binder to bind old and new concrete chemical bond as per manufacturer's instructions and procedures complete all as specified & directed by the Engineer-in-Charge.

Material and labour for welding Mild Steel wire mesh weighing not less that 1kg/Sqm and primed with nitco zinc primer, fixing to the prepared concrete surface through proper fixing arrangements and applying 40 mm thick average cement mortar in ratio 1:4 mixed with liquid water proofing compound chemical not less than @ 5% by weight of cement, applied with guniting machine/shotgun at a pressure not less than 5kg/Sqm, including lapping of new reinforcement to the rusted portion all as per manufacturer's instructions and carried out the work as per procedures specified and as directed by Engr -in-Charge. Note:- Reinforcement shall be measured and paid separtely.

Material and labour for providing rendering of 10mm average thickness in cement mortar 1:4 with liquid water proofing compound not less that @ 3% by weight of cement applied all as per manufacturer's instructions and procedures complete all as specified & directed by the Engineer-in-Charge.

Material and labour for applying two coats of epoxy based water proofing and protective coating on newly plastered surfaces all as per manufacturer's instructions and procedures complete all as specified and as directed by the Engineer-in-Charge. Note : Ser No 79 to 85 (a) The work for item Srl item No.79 to 85 shall be executed directly by the companies authorised applicator. Application shall be authorised in writing by the company and furnishing a service guarantee of five yeras from the dates of completion of work executed shall be owned by the contractor in writing (b) Quated rates shall be inclusive of the material and labours tools and plants scaffolding & working upto 15metres height. (c) Adoption of necessary safety arrangements like safety belts ,ropes helmets ,netting etc which are required for safety of working for height etc which are required for safety of working at height exceeding 3 to 15 mtr height shall be mandatory and deemed to be inclusive on quoated rates

Material & labour for preparation of newly plastered surfaces of wall ,ceiling ,chajja and applying two coats of cement base paint white or tinted over one coat of wall care putty in patches as required including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy all as specified and as directed by Engineer in charge . Note :- Qouted rate shall be deemed to be included for work in building /struture of any height .

Material & labour for preparation of newly plastered surfaces of wall ,ceiling ,chajja and applying a coat of white cement base wall care putty in patches as required and as directed by Engineer in charge finished even and smooth with sand paper and applying two coats of exterior weather proof water base emulsion paint white or tinted including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidycomplete all as specified and as directed by the Engineer in charge

MAA CHAMUNDA CONSTRUCTION & SUPPLIER

DEV INDUSTRIES