Delhi

Financial Eval

Works

Electrical Works

Maintenance of Street Lights, High Masts on Delhi PWD Roads under PWD M-South Division during 2026-27

Public Works Department

New Delhi | South East Delhi, Delhi

Amount: ₹17.9 LCloses: 28 May 2026Closed

Bids

Percentage

9 Bids23 Jun 2026

#	Company	Amount	Rank	Status
1	L1₹8.5 LAccepted-Finance	₹8.5 L	L1	Accepted-Finance Ist lowest
2	L2₹10.2 LRejected-Finance H 123 GYAN MANDIR ROAD GALI NO 3 JAITPUR EXTENSION BADARPUR NEW DELHI 110044 \| NEW DELHI \| SOUTH EAST DELHI \| DELHI \| 110044	₹10.2 L	L2	Rejected-Finance 2nd
3	L3₹10.3 LRejected-Finance NOT SPECIFIED	₹10.3 L	L3	Rejected-Finance 3rd
4	L4₹12.3 LRejected-Finance 15 119 DAKHINPURI NEW DELHI 110062 \| SOUTH \| DELHI \| 110062	₹12.3 L	L4	Rejected-Finance 4th
5	L5₹14.6 LRejected-Finance NONE	₹14.6 L	L5	Rejected-Finance 5th

Tender Value

₹17.9 L

EMD Value

₹35,752

Closing Date

28 May 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer (E)

Address

O/o The Executive Engineer (E) South Elect. Div., PWD, Sukhdev Vihar, Mathura Road, Near Okhla Flyover, New Delhi

Work Description

Replacement of Accidental Poles, LED Fitting, Earthing and Cabling Work at Various Roads under M-South Division

Tender Information

Tender ID

2026_PWD_291752_1

Reference Number

24/EE(E)/EMD South Elect. Divn./PWD/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Period of Work

30 days

Location

New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

13 documents required · 13 mandatory

Fee/PreQual/Technical

RequiredEarnest Money as per NIT (.pdf)

Requiredb) Receipt of deposition of original EMD issued from division office of any Executive Engineer, PWD/ (.pdf)

Requiredc) Valid Electrical License. However, the contractors will be allowed to participate in tender with (.pdf)

Requirede) Scanned copy of valid PAN Card as issued by the Income Tax Department. (Required from both CPWD (.pdf)

Requiredf) Affidavit on Non Judicial Stamp Paper of Rs. 100 as per Form-E (Required from both CPWD Registere (.pdf)

RequiredCPWD Registration OR appropriate list of MES, BSNL and other OR h) Work experience certificate of si (.pdf)

Requiredi. Scanned Copy of Letter of Transmittal. (For Non Registered Contractors only) (.pdf)

Requiredii. Annual financial turnover statement of minimum 30 of estimated cost during the last three conse (.pdf)

Requirediii. Loss and Profit statement during the last five years ending 31st March 2025 (.pdf)

Requirediv. Solvency of minimum 40 of estimated cost OR Net Worth certificate of minimum 10 of estimated c (.pdf)

Requiredv. Affidavit on Non Judicial Stamp Paper of Rs. 100/- regarding back to back execution as per Form-F (.pdf)

Requiredd) Certificate of Registration for GST and acknowledgement of upto date filed return. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹35,752

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

23 Jun 2026

Published

21 May 2026

Bid Opening

28 May 2026

Download Starts

21 May 2026

Download Ends

28 May 2026

Submission Starts

21 May 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (26 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Replacement of old rusted/accidental of street light poles with new flange mounted hot dip Galvanized Octagonal Poles of 10 mtrs. height made from 4 mm thick HT Steel plate, having bottom dia of 200 mm. & top dia of 100 mm. complete with window with flash cover at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 320mm x 320mm x 20mm thick on existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination:- a) 6 mm thick laminated sheet mounted inside the window i/c providing and welding 3 Nos. GI flat strip 4 mm thick of suitable length and having suitable size tapped holes - 2 Nos on each strips. b) 63 amps. terminal block suitable for 25 sq. mm conductor- 4 Nos. & shorting links as required. on DIN channel i/c pdg. and fixing DIN channel of suitable length - 1 No. on the existing laminated sheet. c) 6 amp. SP MCB 'C' characteristics Curve - 1 Nos, earth stud - 1 Nos, welded at suitable height two nos washers, springs washers & nuts. d) Cable support clamp sutiable for 4 Nos. of 4 x 25 sqmm cable. i/c less Credit of old dismental material	18	Nos.	31,530	₹5,67,540
2	Providing and laying in position 1:1½:3 reinforced cement concrete foundation made out of ready mix M-20 grade concrete of size 600mm (L) X 600mm (B) wide and 1500mm deep i/c excavation of earth/WBM Road/CC Road, providing , cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm dia - 1600mm long (approx)-8 Nos. and reinforcement ring of cold twisted bar of 8mm dia - 2800mm (approx) - 10 nos. (with 150mm spacing) as required with positioning of foundation bolts and providing 90 mm. (O.D.) DWC, HDPE pipe for cable entry & exit etc complete as reqd. (Only RMC shall be used at site in presence of Engineer-In-Charge or his authorized representative)	18	Nos.	12,867	₹2,31,606
3	Supplying and fixing 4 Nos. M-24mm dia X 750mm long Gl foundation bolt (EN8 grade) with nuts. washer including 2 Nos. template of 3 mm thick size 320 x 320 mm with 4 nos. 28 mm dia holes, to match with PCD of Pole base plate as reqd	18	Nos.	2,566	₹46,188
4	Fabrication, supplying & fixing of Single/Double/Triple/Quadruple armed galvanized iron bracket of 1.0 mtr long arm of suitable dia on top/in between on suitable height in the existing pole as directed by Engineer-in-charge with the help of drilling, cutting, tightening bolts etc complete as reqd.(Sample must be approved by Engineer-in-Charge before installation at site)	270	Kg.	137	₹36,990
5Supplying and fixing of Following sizes PVC Round Sheathed Multi Core Industrial Flexible unarmoured Aluminium conductor Cable in the surface of wall/ceiling/ in street light poles etc with the help of suitable size clamps etc complete as reqd.
5.01	a) 3 core 2.5 sq. mm	216	Mtr	137	₹29,592
6Supplying, installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection,EMIEMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K /4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).
6.01	150 watt	36	Nos.	5,090	₹1,83,240
7	Supplying & laying of one number 4 x 25 sq.mm XLPE insulated and PVC sheathed Aluminium conductor armoured power cable of 1.1 KV grade in the follwing manner etc as complete reqd. a. In the existing RCC/ HUME/ METAL pipe	600	Mtr	584	₹3,50,400
8Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.06 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.56 MB

Work Item Documents

NIT.pdf

Tender Documents • 2.55 MB

BOQ_387231.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid