PROVN OF INTERLOCKING TILES IN VIP PARKING AND WATER TANK STAGING, FRESH WATER CONNECTIONS FOR P-44 AND P-71 AND SPL REPAIR TO BASKETBALL COURT AT NHO, DEHRADUN

Amount

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Surface dressing not exceeding 15 cm deep and getting out any type of soil complete all as specified and directed.

M&L for hardcore of broken stone of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for providing cement concrete (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in mass concrete sub base of floors complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for coloured Machine pressed glossy finish precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed.

M&L for providing cement concrete type B1, (1:2:4) (using 20mm graded crushed stone aggregate) as in coping including formwork (straight or curved) ends of interlocking and finishing complete all as specified and as directed.

M&L for cement concrete type D-2 (1:4:8) (40mm graded crushed stone aggregate) as in foundation, post hole filling and mass concrete etc complete all as specified and directed.

Taking down cement or cement lime plastering on brick/ concrete surfaces of any type complete all as specified and directed.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where at a level n exc 1.5 m above the starting point in soils complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete type B2, (1:2:4) (using 20mm graded crushed stone aggregate) as in surface channels and drains finished even and smooth complete all as specified and as directed.

S&F for framed works as grills, gratings, hinges and similar works confirming to Fe-290, Gde-E-165 complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil complete all as specified and directed.

S&F mild steel in joist, channel, angle, tubular poles, tubular sections fixed independently, as on posts, purlins, rafters confirming to Fe-410W (Gde-E-250) quality-B complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa and 150AZ as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa and 150 AZ as in roof covering/cladding to wall, ridge, hips, valley gutters, drip and straight flashings (length and girth as fixed) etc fixed with self tapping screws complete all as specified and directed.

M&L for preparing new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as specified and directed.

M&L precast RCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in cover slabs, incl formwork and the like complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with complete all as specified and directed.

M&L for providing cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in foundation, mass concrete and filling in floors laid in panels finished even and fair complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

Supply and filling good earth incl watering and ramming in layers n exc 25 cm each complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 20 mm thick screed bed in Cement morar (1:6) complete incl rounding of edges complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L two coats of weather proof emulsion paint on newly plastered surface over a coat of primer incl preparing the surface with 2mm thick wall putty complete all as specified and directed. Make: APEX of Asian Paint, Weather Coat of Berger)

S&F 9 layer synthetic basket ball court . In the system one layer fiber mesh on full court, two layer of resurfacer, two layer of heavy cushion, two layer of fine cushion, one layer of acrylic texture coat, one layer of acrylic finish top coatas per the specification given by Fedration International Of Basketball. Including marking of linings on top surface.Base will be covered with the net for proper bonding between the floor and the resurfacer for better strength of synthetic floor. Min 9 layered good quality synthetic material with binders, surfaces all weather shield coating. complete all as specified and directed. Note: Work shall be got executed by authorised applicator of manufacturer. Gurantee for the synthetic court shall be three years. Contractor shall submit MoU with manufacturer for three years backup gurantee.

S&F basketball fixed pole set in MS pipe 8 inch with 4 mm thickness (30 mm acrylic board) Acrylic board size (1800x1050mm) with dunking ring and complete set. (set of 02 Poles) as per standard design with powder coating on MS poles incl excavation of post holes and fixing with PCC , Shape of post as approved by GE complete all as specified and directed.

Dismantling existing basket ball pole of MS section including acrylic board and ring including digging out embedded portion complete all as specified and directed.

S&F mild steel Framed work as in staging for water tank sand the like caps, bases built up from two or more beams or channel section or angles, MS hollow pipe, MS plates incl lattice bars, stiffners, gusset plates etc and similar work conforming to Fe.290.Gde-E-250 complete all as specified and directed.

S&F of Welded steel wire fabric not exc 4.00 kg per sqm fixed to MS angles complete all as specified and directed.

S&F MS in hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long dia of shank 11 to 15 mm complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer omplete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F Tubes, "Med grade' 25 mm bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F Tubes, "Med grade' 20 mm bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F Tubes, "Med grade' 15 mm bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F Gun-metal, globe or gate valves, for 20 mm dia bore of pipe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. 25 mm bore of pipe (Minimum weight 25mm-455gms) complete all as specified and directed.

All as per item No. 42 above but 20 mm bore complete all as specified and directed.

S&F CP Bib taps for 15 mm bore pipe,with capstan head fixed in 15 mm bore pipe complete all as specified and directed.

Cutting existing line steel tubing for alteration or addition of 15 mm bore complete all as specified and directed.

Cutting holes in brick walls in cement mortar or stone walls exc half brick but n exc one brick and making good as per existing tiling/ plastering with OBD complete all as specified and directed.

Excavation in trenches in soft/ loose soil not exceeding 1.5 mtr wide and not exc. 1.5 mtr in depth for taking/ laying of CI/ GI pipe and getting out including forming bottom surface etc in loose/ soft soil complete all as specified and directed.

Returning filling in same earth in trenches including spreading leveling watering and well ramming in layers not exc. 25cm thick any type of soil after the pipe laid complete all as specified and directed.

Supply and lay GI water tubing 40mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, trees etc jointed and laid in trenches or floors or fixed to walls/ roofs etc complete all as specifed and directed.

S&F Gun metal gate valve with iron wheel head screwed both ends for GI pipe and fixed complete all as specifed and directed of following sizes :-

25mm dia

40mm dia

Cutting to existing 40mm dia GI main line for taking new branch line complete all as specifed and directed.

Screwing existing 50mm dia steel tubing for alterations or additions (or lengthening screw on pipe to form connector complete all as specifed and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

IRFANAHMAD CONTRACTOR

Bedi Refrigeration Works

Alankar Traders

G S CONSTRUCTIONS

M.K Engineers

P K ASSOCIATES

M/S P K ARORA