Welcome maint to Officers Md Accn including misc B/R and E/M works at Zone 1, 1A, 3A, 3B and 4 in SAA under GE (S) Tezpur

Amount

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) n exc. 1.50 Sqm complete all as specified and as directed.

Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed.

Taking down Shutters of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each and keep in Safe Custody for removing to store, complete all as specified and as directed.

Taking down Shutters of any description, not exc 1.00 Sqm Each, and keep in Safe Custody for removing to store, complete all as specified and as directed.

Taking down and Refixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed.

Taking down and Re-fixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening complete all as specified and as directed. Note :- Serviceable door shutters obtained from item No 2 of BOQ shall be considered for re-fixing in the same opening.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction and all as specified and as directed.

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and as directed.

M&L Plain Cement Concrete type B-1, (1:3:6) (20mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed.

S&F Flush Shutters 35 mm thick, Solid Core Construction with Block Board Core and Plywood Face Panels, Commercial type on Both Sides, complete all as specified and as directed.

M&L Second Class Hardwood Glazed and Skelton Shutter 35 mm thick, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of framing plain, chamfered or rounded, mitred beads for screwing Glass etc., sizes of Members of Shutters as specified in MES Schedule Part I, Section 8, Clause 8.20(a), complete all as specified and as directed.

S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Powder coated Aluminium frame (minimun thickness of powder coating 50 micron) for doors, windows, partitions and ventilators using aluminium sections of size and type approved by Engineer-in-Charge including jointing cleats, snap beading etc, complete all as specified and as directed.

S&F Powder coated aluminium(Thickness or powder coating not less than 50 micron). window and ventilator shutters, sliding type , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangment etc.complete all as specified and as directed.

S & F Powder coated aluminium(Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed

Material & Labour in repairs 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.

S&F Solid PVC particle board consisting of 18-20 mm thick prelaminated PVC sheet inclusive of solvent cement and fixing at site complete all as specified and directed.

S&F Aluminium anodized, Barrel Tower Bolt 200mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed.

S&F MS 300 mm ordinary rat tail rod pattern springs including roller and roller plate for wooden/ steel frame complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S&F in repairs Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed.

S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane including hacking out old broken glass any, size, quality or description from wooden / metal frame complete all as specified and directed.

S& F 4.0 mm thick sheet glass ordinary/tinted quality/frosted and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares including hacking out old broken glass any, size, quality or description from wooden / metal frame complete all as specified and directed.

S&F Stainless Steel Butt Hinges size of Hinges 100 mm (medium weight) and fixed, complete all as specified and as directed.

S&F Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed.

S&F in repairs 100 mm Blank hinge, mild steel stove enamelled, black, for use alongwith mild steel double action spring hinges complete all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

Labour only Brick Work using old bricks obtained from demolition, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

M&L Cement Concrete type C2(1:3:6) using 40mm graded crushed stone aggregate 75mm thick as in Plinth Protection, etc. laid in alternate bays filling joints with bitumen and sand @ ratio of 1:3 Bays at every 3 m intervel, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M & L for 25 mm thick B0 PCC 1:2:4 (12.5mm graded aggregate) as sub base even and rough to recieve the topping layer on roof /floor complete all as specified and as directed.

Demolition of Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed.

M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in slab, shelves supported on walls beam & coloumns in floor roof including balconies, canopies, deck slabs & shelves complete all as specified and directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L Formwork to Soffits of suspended slab such as Roof slab, Floor slab, landings and similar works horizontal or sloping etc., not exceding 200mm thick ,flat rough finished surfaces of concrete, complete all as specified and as directed.

Taking down existing damaged water closet alongwith complete PCC from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of 3 mm thick APP based polymeric membrane, natural colour with cold cut back adhessive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.

S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed.

M&L Rendering (Internally) 10mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.

M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc. finishing Plastered Surfaces Even and Smooth, without using Extra Cement. complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of acrylic emulsion distemper over a coat of primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even by smart painting method complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of acrylic emulsion distemper over a coat of primer and applied over 1 mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even by smart painting method complete all as specified and directed.

M&L Preparation of old plastered or un plastered of surafce of wall including cornices and applying one coat of acrylic emulsion distemper by filling the cracks with putty and make smooth surface by smart painting method complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of acrylic emulsion distemper by filling the cracks with putty and make smooth surface by smart painting method complete all as specified and directed.

M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of White Wash (any colour/ tint) complete all as specified and as directed.

M&L Preparing old decorated Plaster Surfaces of Wall and applying Two Coat of White Wash (any colour/ tint) complete all as specified and as directed.

M&L Preparing old decorated Plaster Surfaces of Ceiling and applying One Coat of White Wash, complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing new Steel or Iron sufrace of any discription, over 10 cm width or girth and applying two coats of synthetic Enamel Paint (First Quality) over a coat of Red Oxide, Zinc Chrome Primer, Complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L for applying for preparation of old painted surface of old painted steel surfaces and iron surfaces of any description, over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specified and directed.

M&L Preparing old decorated plastered surfaces of Walls and applying One Coats of Exterior Emulsion Paint Weather Coat (any colour /tint) (as per Manufacturer’s instructions), complete all as specified and as directed. Make- Asian (apex ultima), Berger Paints-Weathercoat Lifelong7 ,Dulux Paints-Wheathershield Ultraclean

M&L Complete removal of existing treatment of old decorated Surfaces of Walls and appplying two coats of exterior emulsion weather coat (Apex) over one primer coats including properly fillings the cracks with putty, applied by approved applicator as per manufacturer instruction complete all as specified and directed.

M&L Complete removal of existing treatment of old decorated Surfaces of Walls and appplying two coats of exterior emulsion weather coat (Apex) over one primer coats of damp shield including properly fillings the cracks with putty, applied by approved applicator as per manufacturer instruction complete all as specified and directed.

M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion paint over a coat of damp shield Primer (as per Manufacturer’s instructions), and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x.55 mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 2 mm dia double GI wire with end adjuster at one end only suspender including S & F of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss or any type of truss complete all as specified and directed.

M&L for cutting grooves in brick wall 75mmwide & 65mm deep for tucking in edges of felt & shapping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Cutting out cracks to V section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1(by Weight) complete all as specified and directed.

Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly complete all as specified and directed.

M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm,complete all as specified and directed.

M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Preparing and cleaning of fully dry surface as per IS:3067-1966. (b) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.50 Litre per Sqm.(salitex primer of STP) (c) Applying coat of hot applied bitumen 85/25 @ 1.20 Kg/Sq m of surfaces (d) Applying a layer of APP based Polymeric Membrance; 3.0mm thick (minimum) weighing 3.60 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (d) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

M&L for cleaning of existing terrazzo flooring with machine cutting to make the existing floor surface smooth including filling of joints rough surface by using white cement and pigment if required to match the existing surface of floor complete all as specified and directed.

S&F Machine cut kota stone slab flooring 20-25mm thick (size min 550x 550)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite Finish Polishing) complete over 20mm thick 1:6 cement mortar screed bed complete all as specified and as directed.

S&F Machine cut kota stone slab 20-25mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 20 mm thick backing layer in cement mortar (1:4) including rubbing and polishing complete all as specified and as directed.

M&L Ceramic Glazed Premium tiles 9 to 10 mm thick (square/ rectangular) any shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L Ceramic Glazed Premium tiles 9 to 10 mm thick (square/ rectangular) any shade, polished, area of each tiles not exceeding 0.36 sqm, on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L Coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors over and including 15mm thick screed bed/bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor complete all as specified and as directed.

M&L Coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors over and including 15mm thick screed bed/bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor complete all as specified and as directed.

M&L Non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles 450 x 350 mm x 7to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screeding in Cement mortar 1:4 complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles 600mmx300mm x 7 to 8mm thick, premium quality of any shade in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screeding in Cement mortar 1:3 complete all as specified and as directed.

M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, complete all as specified and as directed.

M&L 20mm thick coloured Granite tiles machine cut as in vertical surfaces such as skirting/dado laid over 15mm thick in cement mortar (1:4) set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tile including grinding and polishing complete all as specified and as directed.

M&L for vitrified parking tiles of any colour/pattern of size 400 x 400 x 8 to 10 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation,including taking down complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down complete as all specified and as directed.

S & F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down complete all as specified and as directed.

S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down complete all as specified and as directed.

S&F Pillar Tap 15mm bore, cast copper alloy, Fancy type, chromium plated, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.

S&F Bib Tap 15mm dia (bore), Cast Copper Alloy, Chromium Plated, screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipe or for Unions and fixed-in-repairs, complete all as specified and directed.

S&F Stop Valve 15 mm dia (bore), Cast Copper Alloy, Concealed type, Chromium Plated (Fancy type long Shank and Cup) screwed down high pressure with Crutch or Butterfly Handle, screwed both Ends for Iron Pipes or for Unions and fixed-in-repairs, complete all as specified and as directed.

Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

Supply and fix, as in repair, waste coupling CP 32/40mm dia for glazed ware basins etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed.

S&F Angular Stop Cock 15 mm dia (bore), cast copper alloy, fancy type, chromium plated, screwed down, high pressure,with wall flange screwed for Iron Pipes or Brass Ferrule and fixed in repair, complete all as specified and directed.

Supply & fix as in repair stainless steel curtain rod of dia 20 to 25 mm with fixing brackets,etc. with two Nos of end knobs complete for doors/window opening complete all as specified and as directed.

M & L in repair PVC (SWR) Nahani/Floor Trap 75mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement, complete all as specified and as directed.

Material and labour, as in repair for 75 mm dia of outlet PVC(SWR) multi floor trap, plain with granting including jointing with solvent cement complete all as specified and as directed.

Supply and fix, as in repairs, sheet glass shelf/corner shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

S & F, as in repair, counter type/table top wash basin vitreous china wash basin, white,size 545 x 545 x 180 mm, including central hole mixer taps, waste coupling & waste pipe, including all necessary arrangement complete all as specified and directed.

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 330mm x160mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position as in framed Work, complete all as specified and as directed.

M&L Second Class Hardwood in Scantlings Wrought Timber Framed and fixed complete all as specified and as directed.

Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in framed Work, complete all as specified and as directed.

M&L Second Class Hardwood plain fillets, sqaure, rectangular or triangular in section Clean Swan, fixed with Nails, cross sectional area exc 13.0 Sqcm but not exc 25.0 Sqcm, complete all as specified and as directed.

S&F PVC connections with PTMT Nut collar bush and spanner, 600 mm long fixed to 15 mm GI pipe including necessary fixing arrangement as in repair complete all as specified and directed.

Dismantling and breaking up PVC drain pipes of any dia jointed in CM and taking out of trenches complete all as specified and directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls or laid in trenches or floor, complete all as specified and as directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls or laid in trenches or floor, complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 75mm bore (dia), Single (Single T) equal or unequal with Access Door and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal with Access Door and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 110mm bore (dia), Jointing to Pipe with Solvent Cement, complete all as specified and as directed.

S&F in repair PVC (SWR) junction double with access door , (double T), equal or unequal 110mm bore and Jointing with Solvent Cement, complete all as specified and as directed

S&F Bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed.

Supply & fix radiant door bottom sealing strip guard (door seal) complete all a specified and directed.

S&F Swivel shower with shower arm 15mm size,195mm long with bend of 45 degree with flange of PTMT any colour as in repair complete all as specified and directed.

S&F Towel Rack chromium plated fixed with chromium plated brass screws and wooden/plastic cleats as in repair complete all as specified and directed.

S&F in repair vitreous china premium/1st quality wash down water closet Single Piece EWC with/ivory/off white (closed pattern incl all necessary accessories like rag bolts/gel gasket etc) including 10liters capacity vitreous china valveless syphonic action type flushing cistern low level white, with inlet ball valve float and handle including brackets complete all as specified and directed.

M & L for repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc complete all as specified and directed. Note : Reinforcement if any provided shall be measured and paid separately

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

Taking down plaster, plaster work for patches, tiling work, filling of cement morter in holes, joints, joinery (wooden/steel) iron/aluminium, pelmet box, etc requiring masonary work and carrying out minor repairs such as patches plaster, tiles, brick, filling etc. including petty repairs material like cement, sand, aggregate, tiles etc. to make it functional complete all as specified and directed. (Note: Any items required to be replaced shall be paid under respective items of Sch 'A'/BoQ).

S & F louvers /Precast RCC Jalli, 35mm thick (measured solid) including all moulding in PCC 1:2:4 type B0 (using 12.5 graded aggregate) set in cement mortar 1:4 including dismantaling complete all as specified and directed.

S&F PVC bathroom cabinet box with mirror, shutter type of size 500X400 fixed on walls with wooden plugs and and chromium plated brass screw and cup washer as in repair complete all as specified & directed.

S&F Tubular Towel rail brass chromium plated 600mm long 20mm dia D type with chromium plated brass screws and wooden/plastic cleats as in repair complete all as specified and directed.

S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangement as in repair complete all as specified and directed.

S&F PVC (SWR) Gully Trap 125mm/110mm bore (dia) Outlet, Plain with Grating and Jointing to Waste Pipe with Solvent Cement, complete all as specified and as directed.

S&F Hasp and staple 100mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Mild steel Continuous (Piano) Hinges, width of Flaps (when open) 30 mm, bright finish and fixed, complete all as specified and as directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished complete all as specified and as directed.

S&F 15 mm dia Bib tap standard of PTMT any colour screwed for iron pipe including taking down old one (minimum weight 90 gms) complete all as specified and directed

S&F Angle stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-90gms) with PTMT flange as in repair complete all as specified and directed.

S&F Swivel Shower Rose with Arms of Chromium Plated for fixing with 15mm bore (dia) Pipe and fixed-in-repairs, complete all as specified and as directed.

Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same opening after reparing and make functional including replacement of fitting and fixture for proper functioning as required complete all as specified and as directed.

S&F in repairs Stainless Steel Sink Mixer with Regular Swinging Spout (Wall Mounted Model) with Connecting Legs and Wall Flanges complete all as specified and directed.

M&L in repair 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face, fixed with screws to timber frame work (Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) complete all as specified and as directed.

S&F in repair Stainless steel zero crank hinges (auto) fancy typewith Mounting Plates & Cover Caps fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as specified and as directed.

S&F in repair 500 mm deep Black Finish Drawer Channel incl of rooler for moving drawer ,precision full extension runner with pull-out stop and roll-out guard,Powder-coated steel, Black complete all as specified and as directed.

S&F in repair Brass handles, cast type,polished bright fancy type,handles fixed with screw,of 125mm size complete all as specified and as directed.

S&F in repair SS304 box type Cargo cutlery basket with width 436 mm, depth 500 mm and height 94mm fixed in kitchen cabinet complete all as specified and as directed.

S&F in repair OrgaTray 570 - 500mm Depth, 900mm Width for 94 mm drawer side profile height set includes variable dividers for organising drawer in any way plastic silver, dividing elements, anthracite fixed in kitchen cabinet complete all as specified and as directed.

S&F in repair CargoTech M Stainless Steel Wire Basket (Thali/Jar Basket) size 536 mm (W) x 500 mm (D) x 200 mm (H) ,Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified and as directed.

S&F in repair CargoTech M Stainless Steel Wire Basket (Plain) size 436 mm (W) x 500 mm (D) x 150 mm (H),Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified and as directed.

S&F in repair Stainless Steel, Chrome plated Bottle Pullout Carcase width 300 mm fixed both layers with acrylic plastic sheet makes it visually appealing and sturdyin kitchen cabinet complete all as specified and as directed.

S&F Aluminium body(extruded section) door closer hydraulically regulated, designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F Mortice lock, Brass, 4 Levers, vertical type, size 75 mm and fixed, complete all as specified and as directed.

S & F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drawn steel spring complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F in repairs wall mixer 3-in-1 CP 15 mm bore including 125 mm dia overhead shower, complete with 15 mm long bend pipe and wall flenge including making good wall surface complete all as specified and directed.

S&F in repair 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S& F in repair of Towel Ring of stainless steel fixed and including Chromium plated brass screws complete all as specified and directed.

S&F Toilet paper holder of brass chromium plated fixed to walls with chromium plated brass screw including necessary fixing arrangement as in repair complete all as specified and directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan as in repair complete all as specified and colour as directed.

S&F in repairs stainless steel grating round/ Square cockroach proof with or without hole100/75mm dia complete all as specified and as directed.

Supply & Fix Kitchen plate rack made of stainless steel sheet 0.60 mm thick of overall size 900mm X 850mm X 250mm with three shelf fixed with chromium plated brass screws and wooden/plastic cleats as in repair complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of existing wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site complete all as specified and as directed. Note : To be measured only when found serviceable in all respects complete for reuse

M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLSH grade as in earth wire for continuity and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note -(i) The cost of modular metal flush box and Modular white Cover Plate with Frame are included in the quoted rate . (ii) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

All items as per Ser No 163 above but for One 3 pin socket out let 5 Amps on independent board.

All items as per Ser No 163 above but for One 3 pin socket out let 5 Amps on same board.

All as per item No. 163 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 15 Amp socket outlet on independent board complete all as specified and directed.

M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

All items as per Ser No 167 above but for One 3 pin socket out let 5 Amps on independent board.

All items as per Ser No 167 above but for One 3 pin socket out let 5 Amps on same board.

All as per item No. 167 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 15 Amp socket outlet on independent board complete all as specified and directed.

S&F Switch piano flush button single pole 5 Amps 230 volt one way complete all as specified and directed.

Fixing only Switch piano any type (as retrived against item Ser No 171 here-in-before) complete all as specified and directed.

Supply and fixing switch socket outlet combination 5 pin 6 amp 2 in 1 flush type complete all as specified and directed.

Fixing only Switch Socket outlet Combination 5 Amp any type(as retrived against item Ser No 173 here-in-before) complete all as specified and directed.

Supply and fixing switch socket outlet combination multipurpose 3 pin 16 amp and one 3 pin 6 amp 5 in 1 controlled by one switch complete all as specified and directed.

Fixing only Switch socket combination 5A/ 16A, 5 in 1flush type (as retrived against item Ser No 175 here-in-before) complete all as specified and directed.

S & F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings including 9 w LED bulb complete all as specified and directed.

S&F Ceiling Rose, surface bakelite 65X35mm, three terminals complete all as specified and directed.

Fixing only Ceiling rose any type (as retrived against item Ser No 178 here-in-before) complete all as specified and directed.

S&F Ceiling fan regulator electronic stepping type, SP 230 Volts, suitable for 1200 mm/1400 mm sweep ceiling fan including necessary electric connection complete all as specified and directed.

Supply and fixing including connection call bell AC 230 volts, single pole complete all as specified and directed.

Supply and fixing including connection of bell push button type 5 Amps complete all as specified and directed.

Supply and fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole MCB of 20 amps complete all as specified and directed.

Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate housing and integrated electronic driver with high efficient LEDs 18 Watt with accessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and including connection complete all as specified and as directed.

S&F LED light fitting 1x 9 W, 230 V, 2 feet with extruded aluminium housing with integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing LED BULK HEAD light fitting 10 watt ,230 V decorative wall mounting type with multicolour ABS housing with poly carbonate rings,and glass shade with lamp holder connector block , etc complele with all accessories per-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.complete all as specified and as directed.

S&F Decorative wall light fixture made out of polycarbonate, suitable with 7 watt LED Bulb white/ warm white colour and as per site requirement complete all as specified and directed.

Supply and fix for Recessed mounting high lumen output LED light fittings of size 2 ft X 2 ft fixed with metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, complete all as specified and as directed.

S&F Street light fittings 1x 25 W New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver with 1.5 M long suitable size complete all as specified and as directed.

S&F Street light bracket made out of 32 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flat iron surface with two coats of synthetic enamel paint over a coat of red oxide primer including taking down unserviceable one complete all as specified and directed.

Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed.

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with din rail earth and neutral bar complete all as specified and as directed.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 12 way single pole and neutral with 200 amps rated bus bar complete including connection complete all as specified and as directed.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 8 way single pole and neutral with 200 amps rated bus bar complete including connection complete all as specified and as directed.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 4 way single pole and neutral with 200 amps rated bus bar complete including connection complete all as specified and as directed.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 2 way single pole and neutral with 200 amps rated bus bar complete including connection complete all as specified and as directed.

Supply and fixing in proper position MCB TPN 63 AMP capacity , 415 Volts with 10 kA breaking capacity complete all as specified and as directed.

S&F MCB Single pole and neutral 240 Volt 20 to 40 Amp capacity complete all as specified and directed.

S&F MCB Single pole 240 Volt 6 to 32 Amp capacity complete all as specified and directed.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed

S & F Modular Regulator Step Type 120 watt, 2 module complete all as specified and directed

S&F Modular bell push, flush type, 5 Amp,1 module all as directed/ specified.

S & F in replacement Modular Blank plate, 1 module complete all as specified and directed.

S&F 4.0 Sqmm 1100 Volts grade heavy duty cable PVC insulated multi stranded aluminium conductor of following size served with inner seathing of PVC tape and over all PVC seathed for service conection including taking down old unserviceable wire complete all as specified and directed.

S&F 6.0 Sqmm 1100 Volts grade heavy duty cable PVC insulated multi stranded aluminium conductor of following size served with inner seathing of PVC tape and over all PVC seathed for service conection including taking down old unserviceable wire complete all as specified and directed.

S&F 10.0 Sqmm 1100 Volts grade heavy duty cable PVC insulated multi stranded aluminium conductor of following size served with inner seathing of PVC tape and over all PVC seathed for service conection including taking down old unserviceable wire complete all as specified and directed.

Taking down old burnt/unserviceable sub main wiring with aluminum/copper conductor PVC insulated cable of any size drawn through PVC casing caping/ PVC Conduit pipe including GI wire accessories etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 10.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 10.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 10.0 Sqmm conductor as main wire and one run of 10.0 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 6.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 6 Sqmm conductor as main wire and one run of 6 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

Taking down, opening or dismantling, de-scaling,brushing and thoroughly cleaning the storage tank of capacity 25 Ltr Geyser and resembling and re-install at same position with new connection pipe and fastener complete all as specified and directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

Chinmay Traders (BID ID -3373799)

M/S HARJINDER SINGH (BID ID -3375543)

D G Corporation (BID ID -3374549)

M/S N S CONSTRUCTION (BID ID -3373046)

MD. LATIFUL AHMED HUSSAIN (BID ID -3376663)

Anil Kumar Sarmah (BID ID -3373201)