Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹89,206
EMD Value
₹1,800
Closing Date
12 Oct 2026, 11:00 amDue today
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
Office of the Executive Engineer Mechanical and Hospital Division Anantnag
Painting of Galvanized Iron (GI) sheets, Walls of Sub-Division Office and Divisional Office Building of Mechanical and Hospital Division Anantnag.
2026_PWDJK_326489_1
MHDA/TS/2026-27/62
Open Tender
Miscellaneous Works
Percentage
20 days
Mechanical and Hospital Division Anantnag
Refer NIT
5 documents required · 5 mandatory
₹200
Executive Engineer M and H Division Anantnag
₹1,800
12 Oct 2026
29 Sept 2026
12 Oct 2026
29 Sept 2026
12 Oct 2026
29 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.22.1 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6") as specified. | 20 | Sqm | 990 | ₹19,800 |
| 2 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats) 13.101 | 450 | Sqm | 80.5 | ₹36,225 |
| 3 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 13.53 | 278.47 | Sqm | 98.75 | ₹27,498.91 |
| 4 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture | 40 | Sqm | 142.05 | ₹5,682 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
BOQ_1104397.xls
BOQ • 0.37 MB
ext1.pdf
PDF • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .