REPAIR AND MAINT OF MAP FURNITURE INCLUDING PAINTING AND POLISHING UNDER GE NORTH BINNAGURI

Amount

Table Bed Side: FD/E6/MAP/15 & FD/E6/MAP/15®

(a) Taking out old damaged decayed leg from its position and S&F new leg in the same position as per existing shape and size made out 18mm square MS pipe 18 gauge painted with powder coated black paint complete all as specified and as shown in drawing.

(b) Taking out old damaged decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18 mm thick prelaminated particle board exterior grade decorative natural teak face glossy finish in both side including wooden beading all arround and applying one coat french polish complete all as specified and shown on drg.

(c) All as per items No 1(b) above but Side (left/right) and –ditto-.

(d) All as per items No 1(b) above but Shelf and –ditto-.

(e) All as per items No 1(b) above but bottom base and –ditto-.

(f) Taking out old damaged decayed back Plywood from its position and S&F new 6mm thick plywood BWR grade the same position as per existing shape and size complete all as specified and as shown in drawing.

(g) Taking out old damaged/ decayed pull out tray / top drawer from its position and S&F new pull out tray / drawer in the same position as per existing shape and size complete all as specified and as shown in drawing.

(h) All as per items No 1(g) above but bottom drawer and –ditto-.

(j) Taking out old damaged/ decayed stiffners/runners from its position and S&F new stiffners/runners in the same position as per existing shape and size made out of well seasoned teak wood timber complete all as specified and as shown in drawing.

(k) Taking our old damaged/ decayed telescopic channel from its position and S&F New telescopic channel (thickness 1.5mm), as per existing shape and size fixed with screw, as approved complete all as specified and directed and shown on drg.

(l) S&F shoes in repair new hard rubber shoes in leg complete all as specified and directed.

(m) Taking out old damaged / decayed handle /knob from pull out tray /drawer and S&F new Square 'D' type 100 mm long (4"),steel handle as approved by GE the same place, complete all as specified & as directed by Engr-in-charge.

(n) M&L for applying synthetic enamel paint to steel surface and applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Chair Dining JCO/OR: FD/MAP-II/ 05: Repairs to Chair dining JCO/ORs for the following :- Removing old unserviceable fitting and fixture of Chair dining without disturbing to the other parts such as legs, rails, stiffiners, back rest etc and supply and fixing with new items of well seasoned hard wood (Teak) and minor repair if any complete all as specified and shown on drawing.

(a) Front legs.

(b) Rear legs.

(c) Seat rails (Front/ back, left/ right).

(d) Leg stiffeners.

(e) Back rest stiffeners.

(f) Taking out unserviceable worn out PVC seat frame of Chair Dining and S & F new PVC seat frame as per existing shape and size in the same position with suitable screw complete all as specified and as shown in drawing.

(g) S & F in repair new seat stiffener fixed to middle of seat rail made out of well seasoned hard wood timber (size 30 x 25mm), complete all as specified and as directed.

(h) S&F in repair hard PVC new shoes with screws best quality, complete all as specified and shown on drawing.

(j) M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Chair Dining Offr with cushion: FD/MAP-II/ 04: Repairs to Chair dining Officer for the following:- Removing old unserviceable fitting and fixture of Chair dining without disturbing to the other parts such as legs, rails, stiffiners, back rest /battens etc and supply and fixing with new parts of well seasoned hard wood (Teak) and minor repair if any complete all as specified and shown on drawing.

(a) Front legs.

(b) Rear legs.

(c) Seat rails (Front/ back, left/ right).

(d) Leg stiffeners.

(e) Back rest stiffeners.

(f) Taking out old unsv foam cushion from chair and S & F new cushion 75mm thick, 40 density of size 17" x 15" with leatheritic cover or tapestry cloth as approved by Engr-in-charge, complete all as specified and as shown in drawing.

(g) Taking out unsv seat ply from its position and S&F new ply 12mm thick commercial as per existing shape and size fixed to frame with screw complete all as specified and shown on drawing.

(h) S&F in repair hard PVC new shoes with screws best quality, complete all as specified and shown on drawing.

(j) M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Chair Verandah: FD/MAP-II/ 15:

(a) M&L for spot welding in repairs of broken steel frame complete all as specified and as shown in drawing. (Note : Material to be weled not to exzceed 2.00mm in thickness)

(b) M & L for painting of steel frame of chair verandah with one or more coat of white synthetic enamel paint (best quality) after preparation of old steel surfaces including applying one coat of red oxide primer over newly welded surfaces complete all as specified and as shown in drawing.

(c) Taking out old existing damaged / broken seat frame of chair verandah and supply & fix new seat frame complete all as specified and as shown in drawing.

(d) Taking out old existing damaged / broken back frame of chair verandah and supply & fix new back frame complete all as specified and as shown in drawing.

(e) S&F in repair new hard rubber /PVC shoes of best quality complete all as specified and as shown on drawing.

Chair Writing: FD/E6/MAP/12

(a) Taking out old damaged / decayed tapestray cloth from seat /back of chair and replace it with new tapestray cloth as approved by Engr-in-charge, including pve lapping border complete all as directed and shown on drawing. (Note : The cost of tapestray cloth not less than f Rs. 275/- per mtr).

(b) Taking out old damaged / decayed seat / back of chair and S&F new seat/ back, shall be of 12 mm thick hot pressed plywood up hoistered with fabric and moulded polyurethane foam ( shall be 50 mm thick and moulded with density 50.55 kg per cubic mtr) with pvc laping all around as per existing shape after approval of tapestray cloth complete all as directed. (Note : The cost of tapestray cloth should be min of Rs. 275/- per mtr).

(c ) Taking out old damaged / decayed steel frame (pipe) of chair and replace it with new MS pipe 25mm dia 2mm thick as per existing shape and size incl provide MS flat with making holes for fixing handles complete all as directed and shown on drawing.

(d ) Taking out old damaged / decayed handle from chair and Supply and fixing of arms made out of black integral skin polyurethane with 75-85 shore 'A' hard ness and reinforced with MS insert along with nut & bolt where reqd to chair writing all as shown on drg.

(e) M & L for spot welding to damaged/broken steel frame of chair writing complete all as specified and as shown on drawing. (Note :- Length of each spot welding 4cm in length and not exc. 2mm in thickness).

(f) Taking out old unserviceable hard PVC shoes & S&F new hard PVC shoes as approved complete all as specified and as shown on drawing.

(g) S & F in repair new flat iron to chair writing duly run welding at bottom of steel frame for support of seat frame, the flat iron shall be 25mm width x 5mm thick and 500mm long with making holes for fixing screw, and applying one coat of red oxide primer complete all as specified and as shown on drawing.

(h) M & L for painting to all steel surface of chair writing with one or more coat of synthetic enamel paint (best quality) after preparation of old steel surfaces including applying one coat of red oxide primer over newly welded surfaces complete all as specified and as shown in drawing.

Table Dining four Persons: FD/MAP-II/ 03

(a) Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish glossy finish on top side and another side applying French polish including wooden beading all arround complete all as specified and directed and shown on drawing.

(b) Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned hard wood ‘Teak' compete all as specified, directed and as shown on drawing.

(c) All as per item No 6 (b) here in before but short rail and ditto-.

(d) All as per item No 6 (b) here in before but leg and ditto-.

(e) All as per item No 6 (b) here in before but stiffner and ditto-.

(f) M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Table Dining Six Persons: FD/MAP-II/ 03

(a) Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish glossy finish on top side and another side applying French Polish including wooden beading all arround complete all as specified and directed and shown on drawing.

(b) Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned hard wood ‘Teak' including applying one coat of French polish high glossy finish over wood filler whenever required compete all as directed and as shown on drawing.

(c) All as per item No 7(b) here in before but short rail and ditto-.

(d) All as per item No 7(b) here in before but leg and ditto-.

(e) All as per item No 7 (b) here in before but stiffner and ditto-.

(f) M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Table Dining eight Persons: FD/MAP-II/ 03

(a) Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak finish glossy finish on top side and another side applying French Polish including wooden beading all arround complete all as specified and directed and shown on drawing.

(b) Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned hard wood ‘Teak' including applying one coat of French polish high glossy finish over wood filler whenever required compete all as directed and as shown on drawing.

(c) All as per item No 8(b) here in before but short rail and ditto-.

(d) All as per item No 8(b) here in before but leg and ditto-.

(e) All as per item No 8(b) here in before but stiffner and ditto-.

(f) M&L for applying French Polish one or more coat till glossy finish achieved to match with existing and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Charpoy IP with Hard Top::FD/MAP-II/ 01

(a) Taking out old damaged / broken plywood from its position and refixing the same with new 12mm thick plywood (BWR grade) 07 layer shall fixed with counter sunk nut, bolts and washer as per existing shape all as specified and as directed.

(b) Taking out old damaged / broken stiffener from its position and refixing the same with new stiffener of size 25mm x 25mm x 16 guage MS tube shall be fixed through spot welding all as specified and as directed.

(c) All as per item ser No 9(b) above but long rail of size 65mm x 25mm x 16 guage MS tube and ditto..

(d) All as per item ser No 9(b) above but short rail of size 65mm x 25mm x 16 guage MS tube and ditto..

(e) All as per item ser No 9(b) above but leg of size 32mm x 32mm x 16 guage MS tube and ditto.

(f) S&F in repair new MS clit of size 25 x 60 x 6mm shall be fixed through spot welding all as specified and shown on drg.

(g) S&F in repair new rubber shoes of best quality to the bottom of leg complete all as specified and as shown on drg.

(h) M & L for painting to steel frame of Charpoy IP by spray machine on complete surface with one or more coat of Black synthetic enamel paint (1st grade quality) including preparation of old painted surfaces including applying ready made putty and red oxide primer wherever required complete all as specified and as directed.

BED HARD STEEL :FD/E6/MAP/08®

(a) Taking out old damaged / broken plywood from its position and refixing the same with new 12mm thick plywood (BWR grade) 07 layer shall fixed with counter sunk nut, bolts and washer as per existing shape all as specified and as directed and shown on drawing.

(b) Taking out old damaged / broken stiffener from its position and refixing the same with new stiffener of size 25mm x 25mm x 16 guage MS tube shall be fixed through spot welding and making holes for fixing ply with nut & bolts all as specified and as directed and shown on drawing. (Note : Thickness of metal to be welded shall not exceed 2mm.)

(c) All as per item ser No 10(b) above but long rail of size 65mm x 25mm x 16 guage MS tube and ditto..

(d) All as per item ser No 10(b) above but short rail of size 65mm x 25mm x 16 guage MS tube and ditto..

(e) All as per item ser No 10(b) above but leg of size 32mm x 32mm x 16 guage MS tube and ditto.

(f) S&F in repair new hard rubber /PVC shoes of best quality to the bottom of leg complete all as specified and as shown on drg.

(g) Taking out old damaged / broken Head board / foot board from its position and S&F new Head board / foot board made with 18 mm thick pre-laminated particle board decorative with natural teak finish both side with 1mm thick laminated beading, complete all as specified and as directed by Engr-in-charge.

(h) M & L in repairs to broken steel frame by spot welding not exc 2.5 cm in length complete all as specified and as directed as shown on drawing. Note: Material to be welded not to exceed 2.00mm in thickness.

(j) M & L for painting to Bed Hard steel by spray machine on complete surface with one or more coat of Black synthetic enamel paint (1st grade quality) including preparation of old painted surfaces including applying ready made putty and red oxide primer wherever required complete all as specified and as directed.

Rack Shoe Steel:FD/E6/MAP-II/2®

(a) M&L for repair of rack shoes including spot welding in repairs not exc 2.50cm in length of broken structure complete all as specified and as shown in drawing. (Note : Material to be weled not to exzceed 2.00mm in thickness)

(b) Taking out old damaged / decayed MS Jalli from rack shoe and S&F new jali in the same position made out of 3mm dia MS rod complete all as specified and as shown on drawing.

(c) S&F in repair new rubber shoes of best quality to the bottom of leg complete all as specified and as shown on drg.

(d) M & L for painting to complete steel frame of rack shoes by spray machine with one or more coat of Black synthetic enamel paint (1st grade quality) including preparation of old painted surfaces, rectifie the minor repairs if any including applying ready made putty and red oxide primer wherever required complete all as specified and as directed.

Table Dressing Gents with Mirror: FD/E6/MAP/16

(a) Taking out old damaged / decayed legs from table dressing gents and S&F new legs in the same position as per existing shape and size made out of well seasoned hard wood teak complete all as specified and as shown on drawing.

(b) All as per item ser No 12(a) above but mirror frame and -ditto-

(c) Taking out old damaged / decayed back ply wood from its position and S&F new 12mm thick plywood BWR grade as per existing shape and size complete all as specified and as shown on drawing.

(d) All as per ser No 12(c) above but back ply wood of mirror frame and -ditto-.

(e) Taking out old damaged / decayed frame of table dressing gents (Top,bottom and sides of each frame) form its position and S&F new frame (top,bottom and sides) of same as per existing shape and size made with 18mm thick plywood BWR grade with 0.9mm thick sunmica for outer surface incl 4mm thick wooden beading on all around complete all as specified and as shown on drawing.

(f) S&F in repair glass shelves to existing position with provide glass holder as per existing shape and size, complete all as specified and as shown on drawing.

(g) Taking out old broken / decayed mirror from its position and S&F new 5.5mm thick looking mirror of the same as per existing shape and size complete all as specified and as shown on drawing.

(h) Taking out old Unsv hinges from its position and S&F new long piano continous type hinges as per existing shape and size complete all as specified and as directed.

(j) S&F in repair magnatic catcher fixed to inner portion of side frame for holding of door/mirror frame complete all as specified and as directed by Engr -in-charge.

(k) M&L for applying French Polish to wood/wooden base surface with one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Chair School with Hand Board:FD/E6/MAP/05

(a) Taking out old damaged / decayed top from its position and S&F new top made out of 18 mm thick plywood BWR grade with 0.9mm thick sunmica decorative natural teak glossy finish including wooden beading all arround fixed with MS wood screw complete all as specified and as shown on drawing.

(b) Taking out old damaged / decayed PVC back and seat in one piece from its position and S&F new PVC back and seat in one piece fixed with screw, (make-blow plast or equivalent make as approved by GE) complete all as specified and as shown on drawing.

(c) Taking out old damaged / decayed hollow steel pipe with hinges form its position and S&F (RHS) Hollow steel pipe 25mm dia with hinges, inserted to frame and fixed to frame for slide on rod for adjustment of openable table top, complete all as specified and as shown on drawing.

(d) M&L for repair of chair school with spot welding or minor repairs and make it serviceable condition, complete all as specified and as shown in drawing. (Note : Material to be weled not to exceed 2.00mm in thickness)

(e) S&F in repair new rubber/PVC shoes of best quality to the bottom of legs complete all as specified and as shown on drg.

(f) M & L for painting of steel frame of chair school with one or more coat of synthetic enamel paint (best quality) after preparation of old steel surfaces including applying one coat of red oxide primer over newly welded surfaces complete all as specified and as shown in drawing.

Table Dressing Ladies with stool :FD/MAP-II/07

(a) Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18mm thick pre-laminated particle board exterior grade decorative teak glossy finish with wooden beading all around complete all as specified & as directed and as shown on drawing.

(b) All as per item No 14(a) above but sides and –ditto-.

(c ) All as per item No 14(a) above but front sutter with long steel piano type hinges and –ditto-.

(d) All as per item No 14(a) above but sides of stool and –ditto-.

(e) Taking out old damaged /decayed bottom from its position and S&F new bottom as per existing shape and size in the same position made out of 12mm thick plywood BWR grade with 0.9mm thick sunmica inner side all as specified & as directed and as shown on drawing.

(f) All as per item No 14(e) above but seat ply of stool with one coat of french polish and –ditto-.

(g) All as per item No 14(e) above but back ply of table with 18mm thick plywood BWR grade with one coat of french polish and –ditto-.

(h) All as per item No 14(e) above but back ply of mirror frame made with 6mm thick plywood BWR grade and –ditto-.

(j) Taking out old damaged / decayed mirror frame form its position and supply and fixing of new frame as per existing shape and size in the same position made out of well seasoned teak wood complete all as specified & as directed and as shown on drawing.

(k) Taking out old damaged / broken mirror from its position and S&F new mirror of size 5mm thick in the same position as approved all as specified and as directed and as shown on drawing.

(l) Taking out old damaged / decayed drawer from its position and S&F new drawer complete all as specified & as directed and as shown on drawing.

(m) Taking out old damaged / decayed handle from drawer/shutter and S&F new Square 'D' type 75 mm long steel handle as approved by GE the same place, complete all as specified & as directed by Engr-in-charge.

(n) Taking out unsv/decayed Magnatic catcher from its position and S&F new Magnatic catcher with stainless of same size and shape complete all as specified & as directed and as shown on drawing.

(o) Remove old damaged / unsv foam cushion from its position and S&F new 75mm Thick foam 40 density cushion covered with leatherite as per shape and size complete all as specified & as directed and as shown on drawing.

(p) Taking out old damaged / decayed Revolving Nylon double wheel from its position from stool and S&F new Heavy duty Revolving Nylon double wheel of 50mm dia of same size and shape complete all as specified & as directed and as shown on drawing.

(q) S&F in repair new long/short stiffner at bottom of table dressing ladies made out of 50mm x 30mm section hard wood teak including applying one coat of French polish glossy finish complete all as specified & as directed by engr -in-charge.

(r) M&L for applying French Polish one or more coat till glossy finish achieved to match with existing surface and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Sofa Set 5 Seater Wooden: FD/MAP-II/ 02 / FD-281:Repairs to Sofa set 5 seater for the following :- Removing old unserviceable fitting and fixture of sofa chair without disturbing to the other parts such as legs, rails, stiffiners, back rest /battens etc and supply and fixing with new parts of well seasoned hard wood (Teak) and minor repair if any complete all as specified and shown on drawing.

(a) Long rail of 3 seater (Front / rear).

(b) Short rail (left/right) of (1 & 3) seater.

(c) Long rail of single seater (front / rear).

(d) Front leg (left / right) of size 35 x 75mm section.

(e) Rear leg (left / right) of size 35 x 75mm section.

(f) Wooden Batten of size 50 x 25mm section.

(g) Wooden Bearers/stiffner of size 40 x 40 mm section.

(h) Arms rest of size 75 x 35 mm section.

(j) Taking out old damaged/decayed Plywood from seat/back of sofa set 3 seater and S&F new the same as per existing shape and size made of 12mm thick plywood BWR grade complete all as specified. (FD/MAP-II/2)

(k) Taking down worn out/damaged tapestry cloth cover from foam cushion and supply and fixing new cover made with Thai Matty Fabric, plain pattern multicolour tapestry cloth, as approved by Engr -in-charge, complete all as specified and as shown in drawing. (Note : The cost of tapestray cloth not less than Rs. 270/- per mtr).

(l) Taking out old unserviceable/damaged foam cushion and S&F new foam cushion of 'cool' foam of 40 density 530mm x 500mm and 100mm thick with cover and chain as approved by Engr -in-charge, complete all as specified and directed. (Note : The cost of tapestray cloth not less than Rs. 270/- per mtr).

(m) M&L for applying French Polish to sofa 3 seater with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

(n) All as per ser No 15(m) above but Single seater and ditto-.

Sofa Set 4 Seater Wooden: FD/MAP-II/ 02 / FD-281:Repairs to Sofa set 4 seater for the following :- Removing old unserviceable fitting and fixture of sofa chair without disturbing to the other parts such as legs, rails, stiffiners, back rest /battens etc and supply and fixing with new parts of well seasoned hard wood (Teak) and minor repair if any complete all as specified and shown on drawing.

(a) Long rail (front/rear).

(b) Short rail (left/right) .

(c) Front leg (left / right) of size 35 x 75mm section.

(d) Rear leg (left / right) of size 35 x 75mm section.

(e) Wooden Batten of size 50 x 25mm section.

(f) Wooden Bearers/stiffner of size 40 x 40 mm section.

(g) Arms rest of size 75 x 35 mm section.

(h) Taking out old damaged/decayed Plywood from seat/back of sofa set and S&F new the same position as per existing shape and size made 12mm thick plywood commercial BWR grade complete all as specified. (FD/MAP-II/2)

(j) Taking down worn out/damaged tapestry cloth cover from foam cushion and supply and fixing new cover made with Thai Matty Fabric, plain pattern multicolour tapestry cloth, as approved by Engr -in-charge, complete all as specified and as shown in drawing. (Note : The cost of tapestray cloth not less than Rs. 270/- per mtr).

(k) Taking out old unserviceable/damaged foam cushion and S&F new foam cushion of 'cool' foam of 40 density 530mm x 500mm and 100mm thick with cover and chain as approved by Engr -in-charge, complete all as specified and directed (Note : The cost of tapestray cloth not less than Rs. 270/- per mtr).

(l) M&L for applying French Polish to sofa 4 seater with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Bin liner multi purpose:FD/E6/MAP/09

(a) Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18mm thick pre-laminated particle board both side teak face glossy finish including wooden beading all arround complete all as specified & directed and as shown on drawing.

(b) All as per Ser No 17(a) above but sides (left/right) and –ditto-.

(c) All as per Ser No 17(a) above but bottom and –ditto-.

(d) All as per Ser No 17(a) above but inter shelves and –ditto-.

(e) All as per Ser No 17(a) above but door shutter and fixed with new long type stainless steel piano type hinges with screw and ditto-.

(f) Taking out old damaged/decayed back ply wood from its position and S&F new plywood 12mm thick commercial BWR grade as per existing shape and size including applying one coat of French polish complete all as specified & as directed and shown drawing.

(g) S&F stiffner in repair on all around (long&short) at bottom/base of bin multipurpose, made with 75mm x 30mm section teak wood incl one coat of french polish high glossy complete all as specified and directed by engr-in-charge .

(h) Taking out old damaged /decayed stiffners from its position and S&F new stiffner of of 25mm x 25mm section well seasoned hard wood Teak as per existing size complete all as specified & as directed and as shown on drawing.

(j) Taking out old damaged /decayed drawer from its position and S&F new drawer of same size and shape complete all as specified & as directed and as shown on drawing.

(k) Taking out old damaged / decayed handle from drawer/shutter and S&F new Square 'D' type 100 mm long (4"), Steel handle as approved the same place, complete all as specified & as directed by Engr-in-charge.

(l) S&F new megnatic catcher with stainless steel plate fixed with screw after taking out old unserviceable megnatic catcher from its position complete all as specified & as directed and as shown on drawing.

(m) M&L for applying French Polish to Bin Multipurpose with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specified, directed and shown on drawing.

Table computer:FD/E6/MAP/03

(a) Taking out old damaged decayed top from its position and S&F new Top made out of 18mm thick pre-laminated particle board exterior grade both side teak face glossy finish including moulded beading all arround the edge including wooden beading all arround the edge complete as specified and as shown on drawing .

(b) All as per item No 18(a) above but pull out tray and -ditto-.

(c) All as per item No 18(a) above but Drawer and -ditto-.

(d) All as per item No 18(a) above but Shelf and -ditto-.

(e) All as per item No 18(a) above but bottom shelf and –ditto-

(f) All as per item No 18(a) above but sides (left/right) and –ditto-

(g) All as per item No 18(a) above but verticle portion of shelf and –ditto-

(h) Taking out old damaged decayed telescopic channel from its position, S&F new Stainless steel telescopic channel (thickness 1.5mm) as per existing shape and size fixed to side of drawer/pull out tray, fixed with screw, as approved, complete all as specified and directed.

(j) S&F nylon buffers in repair to leg as per existing shape and size as approved complete all as specified and as shown in drawing.

(k) Taking out old damaged decayed legs from its position and S&F new legs of varticle portion in the same position as per existing shape and size made out 25mm square MS pipe 1.6mm thick painted with powder coated black paint complete all as specified and as shown in drawing.

(l) All as per item No 18(k) above but stiffners (top / bottom) and –ditto-

(m) Taking out old damaged decayed MS Rectangular pipe of leg from its position and S&F new 25 x 50mm section MS Rectangular pipe 18 Gauge in the same position as per existing shape and size painted with powder coated black paint including rectangular PVC edge cover complete all as specified and as shown in drawing.

(n) Removing dents, bends welding to broken portion rectifying all minor defects and repairs. M & L for painting to complete Steel surface with synthetic enamel paint (1st grade quality) by spray machine after cleaning rust/dust and preparation of old painted surfaces including applying red oxide priner wherever required for making good cavities complete all as specified and directed.

Chair Computer / chair revolving with arms:FD/E6/MAP/01 & TP

(a) Taking out old damaged / decayed tapestray cloth from seat /back of chair and replace it with new tapestray cloth as per existing shape after approval of Engr -in-charge, complete all as directed. (Note : The cost of tapestray cloth should be min of Rs. 275/- per mtr).

(b) Taking out old damaged / decayed seat / back of chair and S&F new seat/ back, shall be of 12 mm thick hot pressed plywood up hoistered with fabric and moulded polyurethane foam ( shall be 60 mm thick and moulded with density 50.55 kg per cubic mtr) with pvc laping all around as per existing shape after approval of tapestray cloth complete all as directed. (Note : The cost of tapestray cloth should be min of Rs. 275/- per mtr).

(c ) Taking out old damaged / decayed handle from chair and Supply and fixing of arms made out of black integral skin polyurethane reinforced with MS insert (It shall be scratch and weather resistant ) as per existing shape and size in the same position all as specified and as shown on drawing.

(d) Taking out old damaged / UNSV hydraulic system from chair and S&F new hydraulic system as per existing shape and size in the same position all as specified and as shown on drawing.

(e) Taking out old damaged / decayed twin wheel castors from chair and S&F of new twin wheel castors as per existing shape and size in the same position all as specified and as shown on drawing.

HINDUSTAN ENGINEERING WORKS (BID ID -3473631)

BBKundu (BID ID -3474839)