ADDN ALTN TO CERTAIN BLDGS ALONGWITH DEMOLITION AND RECONSTRUCTION OF CERTAIN BLDGS AT IMA DEHRADUN

Amount

SCHEDULE A PART-I (BUILDING WORK)

Construction of Storage Accn, ( STORE ROOM No 1) (RCC Framed Structure), with permanent specification all as shown on drawings and as specified.

Construction of Storage Accn, ( STORE ROOM No 2) (RCC Framed Structure), with permanent specification all as shown on drawings and as specified.

SCHEDULE A PART II-A (Internal Electrification) for details refer Sch A in pdf folder

SCHEDULE A PART II-B (Internal Electrification)

Taking down OLD Unsv MCCB db,MCB db,s, Metal Socket including MCB,s of any size /capacity etc and making good the disturbed surfaces in CM 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all as specified and directed.

Taking down old unsv T/L fitting, lamp holder ,security light fitting of any capacity.

Taking down OLD Unsv sub main wiring of any capacity/rating etc and making good the disturbed surfaces in CM 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all as specified and directed.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in including Non regid PVC metallic conduit not less than 25 mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box and outer cover and frame for mounting modular switch, regulators etc complete for the following.

(a) One light point point /bell buzzer/ ceiling fan/Exhaust fan point controlled by one-one way switch.

(b) One three pin 5 Amp socket on same board with other switches.

(c) One three pin 5 Amp socket on independent board

Blank

Blank

(e) All as per item No 3.04 & 3.05 above but one 3 pin socket outlet 15 Amp independent with cable point wiring with cable 4 Sq mm size, with earth continuity conductor of size 4 Sq mm.

Supply and Fixing in repair LED Batten light fittings on walls including brackets all as conforming to the following parameters (i) Syatem watt/Lumens: - Max-20 watts/total system lumen not less than 2500 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 125 lm/watt. (ix) Colour temperature (K): - Not less than 5700( Cool day White ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 20000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV (xv) Heat Shink: - As per OEM's design

Supply and Fixing LED street/Security light fittings on poles/Wall including mounting brackets all as conforming to the following parameters : - (i) Syatem watt/Lumens: - Max-25 watts/total system lumen not less than 3000 lm (ii) Housing: - Single Piece High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - Suitable for pole mounting with bracket arm 40-50mm dia, Mounting height- 5.50m to 6.50 m from GL. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 5700

(x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design

Supply and Fixing LED Suspended light square type fittings all as conforming to the following parameters including taking down old unsv fitting : - (i) Syatem watt/Lumens: - Max 44 watts/total system lumen not less than 4400lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 40 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - surface Suspended (vi) Finish: - Epoxy powder coated . (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 4000 (x) Color Rendering Index (CRI): - Not less than 70

(xi) Life: - Not less than 25000 Hrs of operation @ Ta 35*C (xii) Optics: - diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - 4kv (xv) Heat Shink: - As per OEM's design

Supply and Fixing LED 2 x 2 Surface/Recess Mounted fittings all as conforming to the following parameters including taking down old unsv fitting : - (i) Syatem watt/Lumens: - Max 36 watts/total system lumen not less than 4000lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - surface mounted (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 110 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80

(xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - NA (xv) Heat Shink: - As per OEM's design

S&F DB SPN, 240 volt with 200 amps rated copper bus bar for double door 6 way IP-43, IK-09 suitable for MCB SPN as incoming and MCB SP as out going with blanking plates where required, mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge . (MCBs shall be measured and paid separately).

MCB SPN B curve 6 to 32Amps 240 volts complete all as specified and directed by Engr-in-charge .

S & F Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection,415 volt flush to wall and suitable for fixing FP MCCB 63/100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings of following capacity complete all as directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relavant items of this schedule)

12 WAY VTPN DB

4 WAY VTPN DB

S & F MCCB 4 pole 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting of following capacity complete all as directed.

Material and labour for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed.

Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

Supply and fixing air circulator wall mounted fan single phase 450 mm sweep all as specified.

SCHEDULE A PART IV (Site Clearance and Earthwork) for details refer pdf folder

SCHEDULE A PART IV A (Summer Appliance) for details refer pdf folder

SCHEDULE A PART IV B (Summer Appliance)

Supply & Fix Refrigerator 450 Ltr capacity comprising following specifications: a) BEE Star ratings : Min 4 star b) Premium refrigerators with auto-defrost function. c) Capacity : 450 litres d) Digital Inverter Compressor : Automatic Adjustment Of Speed In Response To Cooling Demand, Quieter Operation And Uses Less Power. Digital Inverter Compressor : greater energy efficiency, less noise and a long-lasting performance. Consumes 50% less power, e) Interior Description : Fresh Food Capacity : Min 295L | Freezer Capacity : Min 106L | Total No Of Compartments : 2 | Drawers : 4| Shelves :2 | Shelf Type : Toughened Glass Shelves | Anti-Bacterial Gasket | Bottle Storage Capacity : 6

Water & Ice Dispenser : Non Plumbing water and ice dispenser for cold water. f) Special Features : Dark Mirror Finish, Automatic Defrost, Full Flat body | Recess handle, Stunning Exteriors | Durable & Spacious interiors, Prime Convertible | Prime Fresh 4 sub modes | Bottom Mount Refrigerator (g) Included in the box : 1 Refrigerator unit, User Manual, Warranty Card, Ice Tray, Egg Tray , etc.

S& F Deep freezer of 320 Ltr capacity comprising the following specification . (a) BEE star rating : (b) .Model Name : GSL 320 (c) Generic Name : Glass Top Deep Freezer (d) Colour : White (e) Door orientation : Sliding Glass (f) Temperature Range in Deg C : <-18°C (g) Net Capacity : 276 Liters (h) Gross Capacity : 320 Liters (j) Finish Type : Glossy (k) Number of Doors : 2 Slides (l) Included Components: 1 unit, 1 Manual, 1 Warranty Card (m) Material : AL -PCM (n) Product Dimensions (W x D x H in cm) 119.5 X 63.5 X 81.5 Centimetres

(o) Refrigerant : R 134 a (p) Compressor Type: Hermetically Sealed (q) Basket : 2 (r) Handle : Slide (s) Wheels : One Direction (t) Puf Thickness: 60 mm (u) Inner Cabinet: Anodized Stucco Aluminium

Supply and Fixing Water purifier system ( RO+UV+TDS Controller 50 LPH water purification system ) having following specifications:- a) Dimension (WxDxH) - 500 mm x 300 mm x 650 mm b) Purification Technology - RO+UV+TDS Controller c) Frame Material - CRCA Steel d) Purified Water Recovery - 50% or more e) Purification Capacity - 50 Ltr/Hrs. f) Input Water Pressure - 1 kg/sq.cm-2 kg.sq.cm g) Maximum input water TDS in PPM - Upto 2000 h) Purification Stage - 7 Stage i) Operation - Fully Automatic j) Installation Type - Wall Mounted

k) Power supply - 24 V DC & 48 V DC l) TDS Rejection - 90% m) UV Lamp - Yes n) TDS Controller - Yes o) Body of Filters - ABS food graded p) Auto Flashing - Yes q) RO Body Cover - Metallic Sheet

SCHEDULE A PART V A (Road Path & hardstanding) for details refer pdf folder

SCHEDULE A PART V B (Road Path & hardstanding)

M&L heavy duty parking tiles 40 cm X 40 cm X 10 mm thick, set , jointed and pointed in neat cement surry in floors with pigments complete all as specified and directed

S&F 80mm thick Heavy duty Factory made Precast RCC M-30 as in drain cover slab reinforcement with 10mm TMT bars and providing black painted set and jointed in Cement mortar 1:4 complete all as directed. Make- ferrocon/Sagar tiles/tulip saharanpur

SCHEDULE A PART VI A (Sewage Disposal) for details refer pdf folder

SCHEDULE A PART VI B (Sewage Disposal)

M&L for 15mm thick ready mix cement plaster on brick, concrete surfaces and wall/Ceiling surface finished even & fair, finishing curing scaffolding etc complete all as specified and directed. Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)

M&L for Cleaning the manhole up to 1.50m deep by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed.

M&L for Cleaning the sewage line up to 150mm dia by rodding manually and removing the sludge and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed.

M&L in repair for DWC (Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed.

Construction of soakage well of size 2.40 M dia X 4.50 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 concrete, including , brick work in CM 1:4, plaster where shown on drg shall be 12mm thick in CM 1:6, bearing plaster 15mm thick in CM 1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm including Demolition of existing old soakage well complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.

Construction of soakage well of size 1.8 M dia X 3.0 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 concrete, including , brick work in CM 1:4, plaster where shown on drg shall be 12mm thick in CM 1:6, bearing plaster 15mm thick in CM 1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm including Demolition of existing old soakage well complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.

Construction of septic tank suitable for 150 users, excavation in any type of soil, foundation in PCC 1:2:4 type B-2, brick work in cement mortar 1:4, internal plaster 12 mm thick in cement mortar 1:3 mixed with water proofing compound external and bearing plaster shall be 15mm thick in cement mortar 1:4 , RCC Slab in M-25 design mix concrete including RCC precast manhole cover slab reinforced with 8mm dia bars with angle iron frame , vent shaft and sludge chamber etc complete all as specified and shown in Drg TD-217 sheet 1/7 to 7/7.

SCHEDULE A PART VII (Air Conditioning)

Supply and Instalation Split Air Conditioner comprising following specifications: a) BEE star rating : 4 star b) PM 2.5 filter c) Hot and Cold type d) Energy saving with human sensor e) Double swing automatic 3D Airflow f) Silicon coated PCB for long life g) High Voltage Protection upto 700V h) 5 speed fan control i) Self Diagnosis k) 3 metre piping and insulation kit l) Anti corrosion copper Heat Exchanger m) Tonnage : 2 TR

n) Rated ISEER : Min 4.4 o) Moisture Removal : Min 2.5 Litre/ hour p) Ambient Operating Temperature range : Cooling (18 degree celcius to 55 degree celcius) Heating ( -15 degree celcius to 24 degree celcius) q) Refrigerant type: Non CFC R32 r) Compressor type : Advanced Hyper Tropical Twin Rotary type s) Evaporator and Condenser Coil Material type : Copper

Supply and Instalation Voltage stabilizer for air conditioner comprising following specifications: (a) Type :5 KVA Digital Voltage Stabilizer With HLC ( 140-280 V) For 2 Ton AC (b) Phase : Single Phase (c) Cooling : Air Cooled (d) Body : Heavy Duty Sheet Metal Casing (e) Maximum Power Handling Capacity (W): 4000W (f) Minimum Input Power (V):110 V (g) Maximum Input Power (V):285 V (h) Nominal Input Power (V): 230 V (j) Minimum Output Power (V):185 V (k) Maximum Output Power (V): 264 V (l) Accuracy (%):11 % (m) Power Rating (VA):5000 VA

(n) Minimum Frequency (Hz):47 Hz (o) Maximum Frequency (Hz):50 Hz (p) Output Voltage Correction (q)Trip Delay (r) Automatic Reset (s)Under /Over voltage protection

Supply and Instalation Sleek Air Curtain [3 Feet] with Magnetic Sensor comprising following specifications: (a) Dimension in MM : 900 (W) X 230 (H) X 220 (D) (b) Airvelocity at Nozzel : 20-21 M/S (c) NO. of Blower : 3 Blower (d) MOC OF Blower : ABS Plastic (e) SIZE OF BLOWERS: 5X 5 Inches (f) No. OF MOTORS : Two (g) Phase : Single Phase (h) Motor RPM : 2800 RPM (j) Body Material :MS body with Powder Coated / SS Body 304 Grade

Supply and Instalation Sleek Air Curtain [4 Feet] with Magnetic Sensor comprising following specifications: (a) Dimension in MM : 1200 (W) X 230 (H) X 220 (D) (b) Airvelocity at Nozzel : 20-21 M/S (c) NO. of Blower : 4 Blower (d) MOC OF Blower : ABS Plastic (e) SIZE OF BLOWERS: 5X 5 Inches (f) No. OF MOTORS : Two (g) Phase : Single Phase (h) Motor RPM : 2800 RPM ( j) Body Material :MS body with Powder Coated / SS Body 304 Grade

Supply and Instalation Sleek Air Curtain [5 Feet] with Magnetic Sensor comprising following specifications: (a) Dimension in MM : 1500 (W) X 230 (H) X 220 (D) (b) Airvelocity at Nozzel : 20-21 M/S (c) NO. of Blower : 5Blower (d) MOC OF Blower : ABS Plastic (e) SIZE OF BLOWERS: 5X 5 Inches (f) No. OF MOTORS : Three (g) Phase : Single Phase (h) Motor RPM : 2800 RPM ( j) Body Material :MS body with Powder Coated / SS Body 304 Grade

SCHEDULE A PART VIII A (EXTERNAL ELECTRIC SUPPLY) for details refer pdf folder

SCHEDULE A PART VIII B (EXTERNAL ELECTRIC SUPPLY)

Taking out old Unsv LT UG cable of any size during excavation in ground. .

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified. Note :- Punned thickness shall be measured and paid.

Supply Installation and testing of LT Panel board of size (1000 x 1000x 500 ) mm CPRI approved , OUT DOOR type 3.15mm thick CRCA sheet, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated Aluminum busbars installed on porcelain / SMC insulators and all interconnection between main busbars as well as outgoing feeders shall be carried out with TPN Aluminum busbar. The panel shall be dust and vermin proof, IP 56 class mm powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front/ back opening type, and fixing 2 Nos.danger notice plate with letter, figures and conventional skull bones in signal red colour and fixed front & back door to LT panel etc with voltage and danger indicated in Hindi and English, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys,

internal wiring with PVC insulated, stranded copper conductor, FRLSH cables, IS-694 marked of adequate size but not less than 1.5 Sqmm. The platform shall be such that it is of a height 50Cm above the ground level mounted on angle iron frame of size (50x50x6mm) and grout in PCC below the ground not less than 15cm ,including connections of all out going/in coming cables and crimping suitable size Alluminium lugs for terminal connections of cables, All out going feeders shall be connected by cable through suitable size gland plate / glands.& feeders shall be indicated by 50 mm size letters in synthetic enamel white complete all as specified and as directed Engr-in-Charge, The scope of work includes the following items :- ( FOR CSD)

Supply Installation and testing of LT Panel board of size (1000 x 1000x 500 ) mm CPRI approved , OUT DOOR type 3.15mm thick CRCA sheet, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated Aluminum busbars installed on porcelain / SMC insulators and all interconnection between main busbars as well as outgoing feeders shall be carried out with TPN Aluminum busbar. The panel shall be dust and vermin proof, IP 56 class mm powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front/ back opening type, and fixing 2 Nos.danger notice plate with letter, figures and conventional skull bones in signal red colour and fixed front & back door to LT panel etc with voltage and danger indicated in Hindi and English, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys,

internal wiring with PVC insulated, stranded copper conductor, FRLSH cables, IS-694 marked of adequate size but not less than 1.5 Sqmm. The platform shall be such that it is of a height 50Cm above the ground level mounted on angle iron frame of size (50x50x6mm) and grout in PCC below the ground not less than 15cm ,including connections of all out going/in coming cables and crimping suitable size Alluminium lugs for terminal connections of cables, All out going feeders shall be connected by cable through suitable size gland plate / glands.& feeders shall be indicated by 50 mm size letters in synthetic enamel white complete all as specified and as directed Engr-in-Charge, The scope of work includes the following items :-( FOR GC MESS)

M & L for installation, commissioning and testing factory made CPRI approved out door cubical type panel board over all size not less than 750x600x750mm fabricated with 3.15mm thick CRCA sheet (Heavy duty) over a frame of 60 x 40 x 6mm angle iron and mounted on platform all around and dust & vermin proof, IP-65 protection, back side openable, fixed with nuts & bolts and front side openable with hinged shutter and locking arrangement by operate alen key individuals for MCCBs and over all front panel double door shutter with powder coated finished both internally and externally suitable for 415 V, AC, 50 HZ, 3 Phase, 4 wire system by means of copper bus bar of size 50 x 5mm (Main) duly wrapped with coloured insulating tape/ sleeves mounted on porcelain insulators with provision of fixing MCCBs necessary inter connections with copper strips of size 30x5mm duly wrapped with coloured insulating tape/ sleeves mounted on porcelain insulators and providing following equipments including connection with all in coming/out going cables of size 16/35 sqmm duly crimping with suitable size copper lugs complete.

INCOMING:- (a) Moulded case circuit breakers (AC 415) MCCB current rating 40 Amp, 4 pole, breaking capacity Icu at 415 Volt, 16 KA, Thermal Magnetic release, Adjustable type (Qty-01 Nos) Make: Legrand/Havells/L&T (b) Digital Voltmeter Bright 7 Segment LED display with Four digit resolution and 14mm Height Wide range of control power supply 80 – 300V AC, 40-70Hz, Volts & Amps: ± 1.0% of Rated Current with 4 modules (Qty- 01Nos) Make: Legrand/Havells/L&T (c) Digital Ammeter Bright 7 Segment LED display with Four digit resolution and 14mm Height Wide range of control power supply 80 – 300V AC, 40-70Hz, Volts & Amps: ± 1.0% of Rated Current with 4 modules (Qty- 01Nos) Make: Legrand/Havells/L&T

OUTGOING:- (a) MCB (415 Volts) of current rating 32 Amp, TPN, (Qty-03 Nos) Note:- One MCB will be standby . Make: Legrand/Havells/L&T (b) Multifuntional digital Astronomical timer switches -01 Nos with contactor time example street light control neon light used to control various loads sign etc according to sunrise and sunset astro time switch with 2 output 16 A - 250 VA 50/60 Hz Astronomical function 2x28 programmes 2 Channel. Make: Legrand/Havells/L&T

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 25 x 4mm thick GI strip by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.(Two earthing for main Panel )

Supply and Fixing LED Flood Light fittings with complete fixing arrangemnets all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 120 watts/total system lumen not less than 12000 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - With complete fixing arangement, (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI) & SDCM: - Not less than 70, <5

(xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design

Supply and Fixing LED Bollard fittings,360 degree light distribution model LIARA 1 mtr length, including connected accessories all as conforming to the following parameters: - (i) System watt/Lumens: - Max-10 watts/total system lumen not less than 100 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 65 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On the surface (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100m/watt. (ix) Colour temperature (K): - Not less than 5700 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 25000 Hrs of operation (xii) Optics: - Polycarbonate Diffuser (xiii) Control gear: - PF not less than 0.90 and THD less than 20% at full load with operating voltage 140-270V AC, 50 Hz.

Supply and Fixing LED Flood Light fittings with complete fixing arrangemnets all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 50 watts/total system lumen not less than 5000 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - With complete fixing arangement, (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI) & SDCM: - Not less than 70, <5 (xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design

M&L high galvanized mast light 16 mtr hot dip galvanized through single dip process suitable for 08 flood light symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 gauge and double drum winch with luminaries mounting arm, pulley assembly, aviation obstruction light (02 Nos), lightning arrestor spike including RCC foundation as per height of 16 mtr complete all as specified with fwg specifications:- 1.High Mast Structure: thickness of galvanization 70 micron with material of construction as per IS: 2062 E250A, single longitudinal weld , two sec (bottom sec sheet thickness 3 mm & top sec sheet thickness 3 mm),cross sec of mast in 20 sides, top sec & bottom sec length 8300 mm, top dia 150 mm & bottom dia 360 mm, stress fit joints, length of overlap is 1.5 times dia of insertion, size of opening door at base 1200 x 305 mm, close fitting door with allen key locking arrangement, base plate thickness 3 mm and diameter 520 mm(OD), detl of template & size of anchor plate and thickness 3 mm with uniform PCC of 445 mm, lightning protection final provided (600mm)

Foundation Bolt Detail: Material as per IS 2062 E250A, no of foundational bolts =8, length of foundational bolt=850 mm, bolt diameter 30 mm.3. Lantern carriage: Material made of MS tubes, no of joints=2, number of arms welded=8,type of fittings/fixtures=16 4. Winch: No of drums: double drum type, Gear ratio: 53:1, method of operation: manual/electrical, lubrication arrangement: permanent oil bath, breaking load capacity: 750 kg 5.Wire Rope: Standard AISI 316,No of ropes: 3 nos of lantern carriage,2 nos of double drum winch, construction:7/19,diameter: 6 mm, thimble & terminals : provided, breaking load capacity: 2350 kg 6.Cable: Type=5 core flexible, Material= PVC/EPR insulated copper conductor ,conductor size=2.5 sqmm, no of cores=5,no of circuit=1,7.Power tool: model=integral, input supply=3 ph 415 V AC, Wattage=1 HP motor Note: Note: (i) Separate cable 2x2.5 sqmm copper conductor single core from LT panel to each aviation light shall be provided. (ii) Thimble shall be secured on ropes by compression splices. NOTE:- Design of foundation based onloading of mast shall be the responsibility of contractor. Design of foundation shall be got vetted by approved OEM

SCHEDULE A PART IX A (Addition / Alteration) for details refer pdf folder

SCHEDULE A PART IX B (Addition / Alteration)

M&L for 15mm thick ready mix cement plaster on brick, concrete surfaces and wall/Ceiling surface finished even & fair, finishing curing scaffolding etc complete all as specified and directed. Make : ACC (Suraksha) / Ultratech (Readyplast) /Birla (Aerocom)

M&L, for Rendering 5 mm thick with Ready Mix mortar on ceiling, soffit of roof projectin and chhajjas of concrete surface finish even and smooth without using extra cement complete all as specified and directed. Make : ACC (Suraksha) / Ultratech (Readyplast) /Birla (Aerocom)

M&L for 15 mm thick rendering in ready mix plaster on other than fare faces of brick wall or concrete surfaces finished even and smooth without using extra cement including mixing WPC (liquid), if directed for external surfaces, all as specified and directed . Note :- WPC ( liquid ) shall be measured and paid separately. Make : ACC (Suraksha) / Ultratech (Readyplast) /Birla (Aerocom)

M&L for 15mm thick ready mix cement plaster on brick, concrete surfaces and wall/Ceiling surface finished even & fair, finishing curing scaffolding etc including taking down of existing cement plaster etc complete all as specified and directed. Make : ACC (Suraksha) / Ultratech (Readyplast) /Birla (Aerocom)

Virified glazed Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cm (1:4) complete, all as directed.

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm complete all as directed including dismantling of existing false ceiling.

S&F, Aluminium Powder coated three track sliding window with two or more shutter with 5mm thick plain glass one shutter of stainless steel mosquito proofing with good quality bearing, handle lock etc, rubber gasket and glazing clips etc using following sections as given in JINDAL catelogue.(a) Bottom rail sec no. 20620. (b) Top & verticle rails sec no. 20621,(c) Handle sec no.20606. (d) Inter lock sec no. 20724 (e) Top & bottom & sides sec no.20844 including PVC track, lock, U chanel and L alm angle cleats etc complete all as specified and directed.

S&F, door stopper of aluminium alloy body and tongue with rubber bush, fixed in door to stop the door with floor, all as specified and directed

S&F, Stainless steel curtain rod 20mm dia of SS conduit pipe grade -304 , complete all as directed.

S&F, Stainless steel heavy duty support brackets of approved quality for 20mm dia curtain rod , complete all as directed.

S&F, Stainless steel decorative finals and end wall bracket of approved quality for 20mm dia curtain rod, complete, complete all as dierected.

Preparation of newly plastered surface of wall and applying 1.5mm thick Asian acrylic damp proof wall care putty as per manufacturer instruction complete all as specified and directed.

Preparation of puttyied/ new plastered surfaces of wall and applying two coats of Oil bound distemper over one coat of primer complete all as specified and directed.

Preparation of newly plastered surfaces or scrapped surfaces and applying two coats of Apex paint ( Weather coat exterior paint) over one coat of exterior primer complete all as specified and directed.

M&L for Preparation of puttied wall / ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. Note : 1. The work pertaining to periodical services shall be executed from authorized applicator as approved by GE. 2. After completion of distempering, contractor have to carry out following work whose rates to be included while quoting the rates. No extra payment will be done on this account and damage if any to be borne by the contractor :- (i) cleaning of floor with floor cleaner and stain should be removed from wall/door/jaali. (ii) cleaning of fan after removing and refixing the same. (iii) shifting of furniture.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surfaces complete all as specified and directed (work to be carried out upto a height of 7.5m). Note : The work pertaining to periodical services shall be executed from authorized applicator as approved by GE

M & L machine cut Kota stone 20 to 25 mm thick over cement screed base 15 mm thick in CM (1:4) laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing kota floor and demolition complete all as directed.

S&F 10-12 mm thick Pinewood plank 100 mm wide tongue and grooved fixed on GI frame work with necessary accesories as in ceiling finished with two coat of varnish complete all as directed.

S&F in repair single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush for UF soft close slim seat cover, hinges fittings, conversion bend, fixing accesories complete all as specified and directed. Make : Jaquar Cat part No OPS-WHT15753NS250UFSMZ/ Cera cat part No S1013105/Kajaria cat part No KB-3007

S&F Vitreous china full set pedestal type wash basin, white, flat back, size 585x450x220mm including bracket, CP brass 32m dia coupling, waste pipe fixed in repair complete all as directed. Make : Jaquar Cat part No Jaguar FLS-WHT-5801 & 5301/Cera cat part No S2040112 & S2090107 or equivalent Make : Kajaria/Kohler

S&F in repair toilet paper holder with flap guard fixed to walls with chromium plated brass screws. Make : Cera cat part No F5013110CH or equivalent in Jaquar/Somany.

S&F in repair soap dish holder fixed to walls with chromium plated brass screws. Make : Cera cat part No F5013106CH or equivalent in Jaquar/Somany

S&F in repairs CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany (Bellis series).

S&F in repairs CP brass hot & cold 15mm dia single lever sink mixer swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany (Bellis series)

S&F in repairs 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany (Bellis series).

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanized width of flap 30 mm and a pair of magnet catcher complete all as specified

S&F in repairs CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany

S&F in repairs CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Cera cat part No F1016211 or equivalent in Jaquar/Somany.

S&F in repair CP Health faucet telephonic type with CP with 1.5m long flexible pipe. Make : Jaguar/CERA/Somany.

S&F in repair brass chromium plated towel ring fixed with screw in wall complete all as specified and directed.Make : Cera cat part No F5013115CH or equivalent in Jaquar/somany.

S&F Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with hole for waste pipe complete all as specified and directed.

M&L Drapery rod in any length, high strength stain less steel pipe having outer dia 25-28mm a pair of brackets & a pair of stainless steel finials, fixed in repair complete all as specified and directed.

M&L for 18/19mm thick both side prelaminated colour WPC board of min density 600 for cup board shutter and frame & fixed at site complete all as specified and directed. Note :- Board edges properly finished with strip on band edges.

M&L for 18/19mm thick white WPC board of min density 600 for cup board shutter and frame & fixed at site complete all as specified and directed.

S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Stainless steel handles 200 mm size for kitchen cabinet shutters complete all as specified and directed. Make : Hexa, Hettich, Hafele

M&L 35mm thick factory made solid WPC (Wood plastic composite) moulded gauged door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and complete all as specified and complete all as specified and directed.

SCHEDULE A PART X (Dismantling/Demolition of existing bldg) for details refer pdf folder

Note : Tenderers may note that amount of credit Rs 5,53,685.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/s Chittar Mal & Co. (BID ID -3474763)

SANJEEV CONSTRUCTIONS (BID ID -3475363)