REPAIR/ REPLACEMENT AND MIANTENANCE OF FIRE ALARM AND FIRE FIGHTING SYSTEM INCLUDING ALLIED WORKS AT ICGS MALKAPURAM UNDER GE(I)(CG) VIZAG

Comprehensive maintenance and repair of addressable/conventional networked fire alarm systems installed at CGC OTM, Sports Complex, Pandya, Kalinga, Multi-level parking, C1, C2, B9/C3, B10 & B11 buildings within ICGS Complex, Malkapuram. The scope includes routine, preventive, and breakdown maintenance, testing, inspection, cleaning, and calibration of all system components to ensure safe and efficient operation. Thorough checking of fire alarm panel with control units, loop controllers, and power supply modules and connected items as per OEM guidelines shall be done. Replacement of spare parts is included in quoted rates. Minor spares must be provided by the contractor at no extra cost, and major parts shall be measured and paid for separately under respective item of BOQ. A checklist for the fire alarm system shall be prepared for each building and submitted for records complete all as specified and directed. Note : (i) Contractor shall visit the site before quoting the rate. (ii) A supervised fire drill shall be carried out as per user requirement. (iii) A Service Engineer will report to site, within 4 – 8 working hours, from the Time of Complaint Logging. (iv) Training to the User Team will be given Half –Yearly based on Client requirement.

Comprehensive maintenance and repair of fire fighting systems consisting of main pump (diesel/electric), jockey pump, control panels, fire hydrants, landing valves, gate valves, NRVs, instrumentation, and associated piping and cabling networks, fire panel installed at CGC OTM Sub-Station, Pandya Bldg, 96Qtrs Pump House & Main Pump House within ICGS Complex, Malkapuram. The scope includes routine, preventive, and breakdown maintenance, testing, inspection, cleaning, and calibration of all system components & panels to ensure safe and efficient operation. Thorough checking of pump performance, controller settings, suction/discharge lines, and valve operations as per OEM guidelines shall be carried out. Replacement of spare parts is included in quoted rates. Minor spares must be provided by the contractor at no extra cost, and major parts shall be measured and paid for separately under respective items of BOQ. A checklist/logbook for the fire fighting system shall be prepared for each building and submitted monthly for records, complete all as specified and directed. Note : (i) The contractor shall visit the site and inspect the fire fighting system before quoting the rate. (ii) A supervised fire drill and hydrant test shall be conducted as per user requirement and recorded. (iii) A Service Engineer shall report to the site within 4–8 working hours from the time of complaint logging. (iv) User training on fire pump operation, valve systems, and emergency procedures shall be provided half-yearly, based on client requirement. (v) The entire system shall be checked and kept in 'Auto' mode with required pressure levels as per OEM standards, wherever applicable.

M & L for preparation of exposed steel surface of existing priming tank / LT Panel / pipe including removal of dust, rust, grease, and old paint using appropriate tools and solvents and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Supply only MS ERW pipe of 150 mm dia, 5.4 mm thickness complete all as specified and directed.

Supply only MS ERW pipe of 100 mm dia, 5.4 mm thickness complete all as specified and directed.

Supply only MS ERW pipe of 80 mm dia, 4.84 mm thickness complete all as specified and directed.

Supply and fixing in repair of damaged/defective/unserviceable fire brigade inlet connection 4 way complete all as specified and directed.

Supply and fixing in repair of damaged/defective/unserviceable fire brigade inlet connection 2 way complete all as specified and directed.

Supply and fixing in repair fire hydrant landing valve GM type A single outlet of 63 mm dia with new hydrant confirming to IS 5290 with PVC blank cap and MS or GI chain complete all as specified and directed.

Supply and fixing in repair fire hydrant landing valve GM type B ( Double head outlet) of 63 mm dia with new hydrant confirming to IS 5290 with PVC blank cap and MS or GI chain complete all as specified and directed.