Construction of Pushkar Nagar near PEddakaluva

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations Manual Means

Red Earthe (Homogeneous) filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work

LAWN/SHURB/GROUNDCOVERS/TREE/TOPIARY/PALMS/: Supply, Delivery of specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., complete. (as per quatation rates) with out GST

Pycas panda Black (bag 21 x 21 feet)

fox tale Plam (8 to 10 feet size )

Song of India New White (15x16)

LAWN Supply, Delivery of specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., complete. (as per quatation rates) with out GST

Raising of Kerb walls for existing Walking Track

Earthwork in excavation for kerb wall foundation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work by Manual means upto 3.00m depth in ordinary soils

Filling Sand in foundation of kerb wall trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Providing Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under drain bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer incharge of the work but excluding seigniorage charges for kerb wall

Providing Concrete for plain/ reinforced concrete M20 Nominal mix using 20 mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cutting complete as per drawings and technical specifications as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Filling Sand in arround foundation and pathway trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, other incidental charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Providing and Laying of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specification including Labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading & unloading, laying to desired lines and levels complete etc as per drawing and Technical Specification Interlocking paver 60mm thick as directed by the departmental office incharge of work.

Providing lighting to Park with (LED lights to walking Track)

Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Makes: As per list of recommended brands.Makes: Bajaj / Valmont/Laasma/Transrail /Utkarsh/ Skipper /Consoul /Surya /Vakrangee/Lysaght Pole/HakkeELEC-6.1.4

Erection charges for 7.50 Mts long ctagonal pole on bridge kerb portion with 4 Nos, 8" Anchor bolts with chemical treatment with suitable "J" type bolts etc duly drilling holes to RCC slab with V.C.C. M.15 concrete for suitable base concreting with necessary steel reinforcement work and curing for 7 days etc. including cost and conveyance of all material and all labour charges etc., complete as directed by the department officers.ELEC-6.1.30

Fabrication, Transportation and supply of 1.0mtrs sword type or any decorative double arm bracket with dooms either side complete with all accessories with MS galvanized 40mm / 50mm dia Pipe.(The design should be approved from field Engineers)ELEC-6.1.19

Supply and transportation of 50/60W. LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System fficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-5), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKE:Wipro/ Philips/GE-Venture/ Crompton / Bajaj/Greenlites /Havells/Valmont(Hypernova)/JLCJustled(Hi Power)/ Capart(Premium) /Sturlite(Spektr)/Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready / Surya (LiviaPro) / FortuneArrt (Fin)/ Rhino(GPFL02 Series)/Orient(Sigma Plus) /Bee-lite(Endura)/Ecolink(Durafloodlight) / Pro-Lite(BGL) /Transrail(Indus)b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG ELEC-3.8.27 a

Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work.Makes:FP MCBmake :Legrand / Schnieder / Lauritz Knudsen (formerly L&T). ELEC-6.1.24

Supply and transportation of outer dia 50 mm and inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN-500 86/IS 14930 part-II makes DURA LINE(Dura Guard) or its equivalent MAT-03591

Supply of 16 Sqmm 4 Core.XLPE insulated 1100 V grade armoured alluminium cable as per specification cinfirming to IS 7098 (part-1) of makes Torrent/ universal / CCI / Unicab MAT-03420

Supply of 25 Sqmm 3.5 Core.XLPE insulated 1100 V grade armoured alluminium cable as per specification cinfirming to IS 7098 (part-1) of makes Torrent/ universal / CCI / Unicab

Supply and Transportation of 2C x 2.5 sq.mmXLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I:1988 for XLPE insulated / IS 1554 Part 1:1988 for PVC insulated. Makes: Finolex /RR Kable /KEI MAT- 03476

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of upto 3.00m depth. Mechnical Means

Sand filling in foundation trenches in layers as per drawing and technical specification including compacting , ramming watering etc., Clause MORD & 304 MORTH for foundations of cc Roads .Complete as per SS and as directed by the departmental officer in-charge of the work as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH for foundations

Providing Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under drain bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer incharge of the work but excluding seigniorage charges

Providing Concrete for plain/ reinforced concrete M20 Nominal mix using 20 mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cutting for 14 days complete as per drawings and technical specifications as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) ELEC-6.7.5

Supply of 10.0 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade conforming IS: 694:2010 & IS:17048/2018(for HFFR/ZHFR variants).Makes:Makes: Star / Airson/ Benlo / Rajnigandha/ CRI/Spykaar Unicab/Fybros/A-Flex /Foursun /Vimcab/Vasura/Vasavi/PSPL /NITCAB.ELEC-1.5.3 MAT-02767

Providing of Water Supply Facilities to Park

Augoring and boring of holes in site for 300 mm dia Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles in tools room

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters for Double under reamed bulbs

Providing Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under drain bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer incharge of the work but excluding seigniorage charges

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering, shuttering,laying concrete, vibrating,curing etc M20 design mix

125 mm thk Slab

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works,including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars,including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer Roto Moulded confforming to IS :12701 approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings and base support etc., complete as per SS and as directed by the departmental officer in charge of work.

Filling Sand in basement as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Brick masonry with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all materials and such as labour charges, like mixing cement mortar, constructing masonry, , curing for finished item of work etc complete as per SS and as directed by the departmental officer incharge of the work for basement and Super structure tools room.

Plastering with cement mortar (1:3), 12 mm thick on Coloums in superstructure as per technical specification Section 1300 & 2200 MORTH including cost and conveyance of all materials and labour charges for mixing cement mortor, laying, Scaffolding Charges and lifiting charges finshing the surface true to alignment and curing etc complete as per SS and as directed by the departmental officer incharge of the work for ceilinf in tools room

Plastering with cement mortar (1:4), 12 mm thick on Coloums in superstructure as per technical specification Section 1300 & 2200 MORTH including cost and conveyance of all materials and labour charges for mixing cement mortor, laying, Scaffolding Charges and lifiting charges finshing the surface true to alignment and curing etc complete as per SS and as directed by the departmental officer incharge of the work. for inside and out side tools room.

Painting ot New Walls with Two coats of Plastic Emalusion paint over a prime coat of cement premer total 3 coats of Approved Brand and shade after throughly Brushing the surface to remove all dirt and remains of loose powdered meterials cost and conveyance of all material and labour charges etc., As per S.S.911 and as directed by the departmental officer in charge of the work for external walls and internal wall

Supply and Transportation of 5HP 25 stage with .,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi/ Suguna/Sterling/ JEROME PUMPS ELEC-5.4.3

Supply & Fixing of 80mm dia N basin Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type .This rate including cost of material transportation all labour charges etc., complete as per ss and directed by the departmental officer in charge of work MAT-01852

Manufacture, Supply and Delivery of 40 mm dia 6kgs/cm2 Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub -divisional stores any where in AP.and other incidental chare etc complete as per ss and as directed by the departmental officer in charge of work.

Earthwork in excavation for Pipe line trench as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a)of MORD and 301.2.1of MORT&H--ordinary soil--manual means upto 3m depth for pipe lin trench.

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - This rate including cost of material transportation all labour charges etc., complete as per ss and directed by the departmental officer in charge of work as follows. (BMW-F.63)

40 mm dia gate Valve gate valve for every 15.00 Mts BMW-F.63

25 mm dia gate Valve gate valve for every 15.00 m BMW-F.59

Supply , delivery and fixing of 1/2 " garden plastic pipe ( Quatation rate)

Supply and fixing of Iron Doors, Iron Windows in position complete including welding, grindings fabrication , erction at site work , other incidental charges etc., complete including two coats of as primary coat. as directed by the departmental authorities

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time. as directed by the departmental officer incharge of work Drilling of Bore well 112 mm dia. up to 150.00 m depth

Supply and fixing of single phase Electronic energy Meter,…...AC,50 HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board. Makes: As per list of recommended brands. Makes: CONZERVE / ELMEASURE / MECO / HPL / HAVELLS/ Lauritz Knudsen (formerly L&T) /ABB.ELEC-6.2.8

Supply and Run of 4 of 16 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire ON BOTH SIDES through PVC cleats with all accessories including Cost and conveyance of all the materials and all labour charges etc., complete for service mains.This rate including cost of materials, transporation to site of work, other incidental charges all labour charges, fixing as per IE Rules and as directed by the departmental officer incharge of work

Manufacture, Supply and Delivery of 110 mm x 6kgs/cm2 Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP. This rate incluiding cost of all materials all labour charges, transporation charges other incidental charge etc complete as per SS and as directed by the departmental officer incharge of work 110 MM DIA MAT-07652

Fabrication, transportation and supply of suitable consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB, on/off switch including supply and fixing of DOL starter of complete.,.This rate including cost of materials, transporation to site of work, other incidental charges all labour charges, fixing as per IE Rules and as directed by the departmental officer incharge of work Makes: make C&S/ Lauritz Knudsen (formerly L&T) /Seimens/BCH/KSP(Karunya) /Crompton. completeMAT-03712

Supply of 3 Core 2.5 Sq mm ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990. This rate incluiding cost of all materials all labour charges, transporation charges other incidental charge etc complete as per IE Rules and as directed by the departmental officer incharge of work.Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)/Sudhakar/ Lauritz Knudsen (formerly L&T) /CRI/Suguna/Cord wave/Salzer MAT-02795

Manufacture, Supply, & Delivery of 50 mm dia 4kg/cm2 HDPE pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight Length) - This rate including cost of materials, transporation to site of work, other incidental charges all labour charges, fixing as per ss and as directed by the departmental officer incharge of work OD 50MM MAT-07237

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work by Mechnical means upto 3.00m depth in ordinary soils

Sand filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work

Providing Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under drain bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer incharge of the work but excluding seigniorage charges

Supply and placing of M20 grade the Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all materials all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

for Plinth beam

D. RCC M20 Roof Beam

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500/500D grade) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Brick masonry with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source including cost and conveyance of all materials like cement, sand, bricks, water, seoffoldings, lifting etc., to site, including all materials and such as labour charges, like mixing cement mortar, constructing masonry, , curing for finished item of work etc complete as per SS and as directed by the departmental officer incharge of the work. But excluding seigniorage charges

Plastering with cement mortar (1:4), 12 mm thick on Coloums in superstructure as per technical specification Section 1300 & 2200 MORTH including cost and conveyance of all materials and labour charges for mixing cement mortor, laying, Scaffolding Charges and lifiting charges finshing the surface true to alignment and curing etc complete as per SS and as directed by the departmental officer incharge of the work

Manufacturing supply and fixing of M.S.Grill Gate with M.S.Angulars, M.S.Flats. The rate including cost and conveyance of all material and labour charges for fabrication of steel work including cost of welding rods , power charges and fixing the grills in position etc., complete as directed by the departmental officer in charge of the work.

Providing mural arts decorative theme on walls for giving good visual theme to the visitors, tourists etc., including overall cleaning of surface of walls, painting on primary coat and two coats of acrylic emulsion medium of APEX Ultima weather proof exterior painting and as per the directions of concerened officials of Rajamahendravaram Municipal Corporation and as per the approved design etc., cost including all materials tools artists/ painter charges scaffolding etc., and conveyance of all materials to site complete as direct by the departmental authorities.

Engaging JCB Machine on hire basis including hire charges JCB fuel charges and wages to operator and helper etc., complete as directed by the departmental incharge of the work

Gravel filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work

Auguring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of 300mm diameter

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126).

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering.for footings

for pile concrete

for plinth beam

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126).

Fabrication, supply, Delivery and fixing of MS Structures for Trusses with heavy beams and pipes including cost and conveyance of all materials and all labour charges for cutting welding etc and including all ooperational and incidental labour charges etc, complete. As directed by the Engineer incharge of the work

Supply of prepainted Galvalume Trapeziodal profile roofingsheets( with cripplimg) of 0.50 mm thichness coating Ali-Zinc coating AZ 150 GSM Tensile Strength of 550 MPA paint coating regular modifiedpolyster painting thickness (TOP) 18 to 20 microns (bottom 5 to 7 microns sheet width 0.585 length maximun 2.50 Mts with regular range colour, incidential and operational charges, cost and conveyance of all labour and materioals at site of work, all etc., complete as directed by Engineer-in-charge.

Brick masonry with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source including cost and conveyance of all materials like cement, sand, bricks, water, seoffoldings, lifting etc., to site, including all materials and such as labour charges, like mixing cement mortar, constructing masonry, , curing for finished item of work etc complete as per SS and as directed by the departmental officer incharge of the work. But excluding seigniorage charges

Providing and fixing factory made uPVC white colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of doorupto 2.50 sqm) BMT-N.84.B

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm). BMT-P.80.B

Plastering with cement mortar (1:4), 12 mm thick on Coloums in superstructure as per technical specification Section 1300 & 2200 MORTH including cost and conveyance of all materials and labour charges for mixing cement mortor, laying, Scaffolding Charges and lifiting charges finshing the surface true to alignment and curing etc complete as per SS and as directed by the departmental officer incharge of the work.

Auguring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles as per SS and as directed by the departmental officer in charge of the work.

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for under reaming in piles etc., complete as per SS and as directed by the departmental officer in charge of the work.

RCC M- 20 Design mix (Cement 350 kgs fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. as per SS and as directed by the Departmental officer in charge of the work but excluding seigniorage charges.

For piles 230 mmdia

Plinth beam for toilets

for columns toilets

for roof slab 125 mm thick Toilets

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded. The rate including cost and conveyance of steel, binding wire, labour charges for fabrication of grills, placing in position, etc., complete as per SS and as directed by the departmental Officer in charge of the work.

Brick Masonry in CM (1:6) with Bricks traditional size 23 x 11 x 7 cms 2nd class. The rate including cost and conveyance of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Filling Sand in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Providing Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under drain bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, includingall materials and all charges for machine mixing, laying concrete in ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of workas per SS and as directed by the departmental officer incharge of the work but excluding seigniorage charges

Plastering with cement mortar (1:3), 12 mm thick on Coloums in superstructure as per technical specification Section 1300 & 2200 MORTH including cost and conveyance of all materials and labour charges for mixing cement mortor, laying, Scaffolding Charges and lifiting charges finshing the surface true to alignment and curing etc complete as per SS and as directed by the departmental officer incharge of the work

Plastering with cement mortar (1:4), 12 mm thick on Coloums in superstructure as per technical specification Section 1300 & 2200 MORTH including cost and conveyance of all materials and labour charges for mixing cement mortor, laying, Scaffolding Charges and lifiting charges finshing the surface true to alignment and curing etc complete as per SS and as directed by the departmental officer incharge of the work

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, i ias per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges

Providing glazed red or white full body ceramic wall tiles of Size 200 x 300mm / 245mm x 325mm and skirting to internal walls to 15 cm height/risers of steps with ceramic tiles 7.30 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Providing Wood Polymer Composite (WPC) solid, frostywhite single extruded factory made 2.44 mt x 1.22 mt boards in 18 MM thickness (Density 650 kg/Cum, Weight 35Kg) MAT-05426

Painting to New Walls with Two coats of Plastic Emulsion paint of Approved Brand and shade after throughly Brushing the surface to remove all dirt and remains of loose powdered meterials cost and conveyance of all material and labour charges etc., As per S.S.911 and as directed by the departmental officer in charge of the work for internal walls

Supply and Fixing of 25mm dia (ISI MARK) PVC 1.5 mm thick pipe concealed conduit, duly threadig at Joints in Slab and on wall with required accessories including chiselling the wall and necessary Masonary and all labour charges etc. complete for run of mains.

Supply and Fixing of 20mm dia 1.5mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges and other incidental charges etc., complete. As per IE Rules and as directed by the departmental officer incharge of work. BLD-ELEC.1.4(B)

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty and other incidental charges etc., complete. As per IE Rules and as directed by the departmental officer incharge of work Makes : a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight

Supply and run of 2 of 36/0.3 mm(2.5 Sqmm) ISI Marked FRLS/FRLS-H/HFFR/ZHFR PVC Insulated flexible copper cables 1100V grade as per IS:694/1990 & IS:17048/2018 specification for copper cable. As per directed by the deportmental authorities and other incidental charges etc., complete. As per IE Rules and as directed by the departmental officer incharge of work Makes: Crompton (HS Plus/HS) / Havells (ES PLUS/SS390ES) /Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy 50 ISI) / G.M

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) ISI Marked FRLS/FRLS-H/HFFR/ZHFR PVC Insulated flexible copper cables 1100V grade as per IS:694/1990 & IS:17048/2018 specification for copper cable including all labour charges and other incidental charges etc., complete. As per IE Rules and as directed by the departmental officer incharge of work SoR 2024-25 Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal /GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi)

Supply and run of 2 of 36/0.3mm (1.5 Sq.mm) ISI Marked FRLS/FRLS-H/HFFR/ZHFR PVC Insulated flexible copper cables 1100V grade as per IS:694/1990 & IS:17048/2018 specification for copper cable inlcuding all labour charges and other incidental charges etc., complete. As per IE Rules and as directed by the departmental officer incharge of work. SoR 2024-25 Makes: Finolex/RR kabel/Havells/Finecab/KEI/Polycab/Gloster/ Goldmedal /GM/Fortune Arrt/Anchor/Million/ APAR(Anushakthi)

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including Cost and conveyance of all the materials and all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings and other incidental charges etc., complete. As per IE Rules and as directed by the departmental officer incharge of work Makes:GMGHome/GoldMedalOlive/MillionZoom /GreatwhiteOmega/Koncept/Vimalopel/Anchor/Vihan/CPL/Havells Reo/Elleys

supply,delivery and fixing of R.C.C Jolli rate including for cost and convenyance, labour charges etc., complete but excluding seignorage charges and as directed as per SS and as directed by the departmental officer incharge of the work. BMS-W.17

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour BMW-D.18

Supplying, of 110 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand. unit each

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) unit each

Supply of 110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)unit each

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand unit each

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice unit 1.00 Rmt

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding Excise duty and Sales Tax etc 180mm dia 6kg/ cm2 preasure PVC casing pipe MAT-07656