Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40,640Accepted-AOC | L1 | Accepted-AOC SUCCESSFUL TENDERER | |
| 2 | Rejected-Technical | - | Rejected-Technical second lowest bid |
| Sl No | Description | Qty | Unit | Ragesh.s L1 | ALISONS CONTRACTING L2 |
|---|---|---|---|---|---|
| 1.00Anganvadi Fecilitation | |||||
| 1.00 | 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete | 3 | hour | 360 ₹1,080 Lowest | 500 ₹1,500 |
| 1.00 | OD431937/2025-2026:Supplying and Fixing including installation of good quality and ISI mark Submersible
pump set of good and reputed brand (like Kirloskar, V-Guard, Crompton etc) with
metal impellerincluding all fittings such as panel board, switch etc and including
labour charge for fittings.1.5 HP Submersible pump set | 1 | no | 24,500 ₹24,500 Lowest | 33,000 ₹33,000 |
| 1.00 | 50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall | 5 | metre | 362 ₹1,810 Lowest | 750 ₹3,750 |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 9.38 | kg | 600 ₹5,625 Lowest | 1,000 ₹9,375 |
| 1.00 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 6.25 | sqm | 1,220 ₹7,625 Lowest | 2,000 ₹12,500 |
Tender Value
₹40,544
EMD Value
₹1,014
Closing Date
23 Mar 2026, 6:00 pmClosed
Assistant Engineer , LID EW
LID and EW Cherunniyoor GP
Proj No.163 Preparation of facilities for Anganwadi activities in kallumalakkunnu library building in cherunniyoor GP
2026_LSGD_847774_3
01 AE LID EW CHR PHASE III
Open Tender
Civil Works - Roads
Item Rate
270 days
Cherunniyoor GP
Please refer Tender documents.
5 documents required · 5 mandatory
₹335
Yes
₹1,014
Yes
13 Oct 2026
16 Mar 2026
25 Mar 2026
16 Mar 2026
23 Mar 2026
16 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Anganvadi Fecilitation | |||||
| 1.001 | 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete | 3 | hour | - | - |
| 1.002 | OD431937/2025-2026:Supplying and Fixing including installation of good quality and ISI mark Submersible
pump set of good and reputed brand (like Kirloskar, V-Guard, Crompton etc) with
metal impellerincluding all fittings such as panel board, switch etc and including
labour charge for fittings.1.5 HP Submersible pump set | 1 | no | - | - |
| 1.003 | 50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall | 5 | metre | - | - |
| 1.004 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 9.38 | kg | - | - |
| 1.005 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 6.25 | sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
fot.pdf
Tender Documents • 0.25 MB
pg.pdf
Tender Documents • 0.25 MB
affi.pdf
Tender Documents • 0.24 MB
viewsbd.pdf
Tender Documents • 1.87 MB
BOQ_1432892.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .