REPAIR/REPLACEMENT OF FLOORING/ SKIRTING/ DADO IN CERTAIN MD ACCNS AND SINGLE LIVING ACCNS AT KATARI BAGH AND SATELLITE AREA AND NB(K) UNDER GE(NW) KOCHI

Amount

Dismantling of floor hearth or wall tilling tiles including CM bedding (but not backing) and disposing the rubbish off the premises outside of MD land complete all as specified and directed.

M&L for 10 mm thick Screed bed or bedding layer of cement mortar 1:4 on floor for laying floor finishes complete all as specified and as directed by Engr -in-Charge.

M&L for Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to receive wall tiles complete all as specified and as directed by Engr-in-Charge

M&L for Vitrified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed by Engr-in-Charge

Same as per item no. 4 above but as in vertical surface complete all as specified and as directed.

M & L for epoxy tile joint filling 3mm width and 3mm deep with and including spacer using Kerapoxy of MPAEI or equivalent on floor and walls of any size of tiles like 300x300/ 450x300/ 600x300 complete as per the manufactures instructions and as directed by Engr-in-Charge.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including provision of CM screed 15 mm thick in CM (1:6) complete all as specified and directed.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including provision of CM screed 15 mm thick in CM (1:6) complete all as specified and directed.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles on vertical surfaces such as skirtings, dados and risers to steps etc. including provision of CM screed 10 mm thick in CM (1:4) complete all as specified and directed.

Material and labour for Glazed ceramic tiles in vertical surface 600x 300x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including provision of backing coat 10 mm thick in CM (1:4) complete all as specified and directed.

M & L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete all as specififed and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar complete all as specified and directed.

M&L 15 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.machine cut polished granite 1st quality complete all as specified and as directed. (Sample of granite should be passed by GE before execution of work)

Demolition of Brickwork or stone/boulder masonry/Pre-cast cement conrete block built in cement mortar including all quoins, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.

M& L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed.

M&L for rendering 10mm thick on brick or concret wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M& L for rendering 15 mm thick CM 1:4 with approved water proofing compound on fair surfaces of brick work or concrete surfaces, finished even and smooth all as specified and directed. Note: WPC will be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon aditives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L preparation of new plastered surfaces of walls (plastered or unplastered) including cornices preparation and applying two coat of distember oil emulsion over a coat of primer complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and as directed.

Supply and fix in repairs Snow white vitreous China wash down water closet single piece (pedestal pattern) with slim soft close seat cover (including fixing bolts) including removing old one and connection to drain and flush pipe. Make: Cera CAMPBELL Cat. No.S1013158 or eqivalent make of Hindware /Parryware or equivalent in the list of make.

Supply and fix in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete all as specified and as directed.

Fixing only Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs complete all as specified and as directed.

Supply and fix in repairs vitreous China wash hand basin of size 550 x 400 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets complete all as specified and as directed.

Same as per item no. 27 but fixing only in repair complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaquar KUP-35001PM/Pillar tap with aerator Parryware Cart Part No.Crust T3102A1 or equivalent make of Hindware/Cera

Fixing only in repair pillar tap screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair SS grating square 125 mm size with centre circular section removal and fixing type complete all as specified. Make : Hindware/Cera/Parryware or equivalent.

S&F in repairs, PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx), with one single shutter and built in mirror in front of shutter complete all as specified and as directed by Engr -in-charge. Make : Hindware/Parryware/Cera or equivalent.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glassshelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket complete. Make : Jaquar ACN-1171N or equivalent make of Hindware/Parryware/Cera

S&F in repairs, corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as psecified and as directed by Engr -in-charge. Make : Jaquar ACN-1173/Hindware/Cera or equivalent.

S&F in repair SS toilet paper holder including fixing screws complete all as specified. Make : Jaquar ACN-1151N /equivalent make of Hindware/CERA or equivalent.

Supply and fix Towel Rack 600mm long with Lower Hangers, Stainless Steel with brackets fixed in repairs 60cm long complete all as specified. Make :Jaquar Towel Rack 600mm Long with Lower Hangers, Stainless Steel Jaquar ACN-1181S or equivalent to Parryware/Cera or equivalent in the list of make.

S&F Single Towel Rail 600mm Long, Stainless Steel complete all as specified and as directed. Make : Jaquar ACN-1111SM or equivalent make of Hindware/ Cera or equivalent in the list of make.

Supply and fix in repair Towel ring, Stainless Steel with brackets complete all as specified. Make : Jaquar Cart Part No. ACN-1121BN or equivalent make of Parryware/Cera

S&F in repair PVC backing looking mirror of size 45x60cm fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed

Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm including re-securing or easing and adjusting and refixing in same opening

Rounding to edges of stone slabs such as in steps platform and other similar situation etc complete all as specified.

M&L for cutting grinding of terrazzo tiles or kota stone floor etc with grinding machine after filing the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall Dado, skirting etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over and cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 15-18mm thick over and cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing including 10mm thick back coat in CM 1:4 in vertical surfaces such as skirting complete all as specified and directed.

M.J.JOY AND COMPANY

EXCEL ENGINEERING

Anaswara Constructions

WELTRONENGINEERINGSERVICES

M.J. Leons and sons

ROY CONSTRUCTION CO

MS BUILDERS

Albert Rebello and Company