Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.4 LAccepted-AOC | 1 | Accepted-AOC LOWEST TENDER ACCEPTED | |
| 2 | 2₹5.8 L+₹40,877 (7.53%)Rejected-AOC | 2 | Rejected-AOC SECOND LOWEST TENDER ACCEPTED | |
| 3 | 3₹6.1 L+₹70,077 (12.9%)Rejected-AOC | 3 | Rejected-AOC THIRD LOWEST TENDER ACCEPTED |
| Sl No | Description | Qty | Unit | Vijayan K L2 | C P BABU L3 | Prakashan VV L1 |
|---|---|---|---|---|---|---|
| 1.00Building renovation | ||||||
| 1.00 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil | 94 | sqm | 125.25 ₹11,773.5 | 131.51 ₹12,361.94 | 116.48 ₹10,949.12 Lowest |
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 5.67 | cum | 335.74 ₹1,904.32 | 352.53 ₹1,999.55 | 312.24 ₹1,771.03 Lowest |
| 1.00 | OD506320/2025-2026:Dry laterite masonry for foundation and basement including cost and conveyance of all materials and all labour charges etc complete | 5.67 | cum | 5,991.51 ₹33,983.84 | 6,291.09 ₹35,683.06 | 5,572.1 ₹31,604.95 Lowest |
| 1.00 | OD506325/2025-2026:Laterite masonry in cm 1:6 for foundation and basement including cost and conveyance of all materials and all labour charges etc complete | 2.85 | cum | 6,496.02 ₹18,500.66 | 6,820.82 ₹19,425.7 | 6,041.3 ₹17,205.62 Lowest |
| 1.00 | OD506323/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearestsize in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. | 7.08 | cum | 7,319.61 ₹51,822.84 | 7,685.59 ₹54,413.98 | 6,807.24 ₹48,195.26 Lowest |
| 1.01 | OD506329/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. (MOD 12.50 of DSR ) | 34.32 | sqm | 538.49 ₹18,480.98 | 565.41 ₹19,404.87 | 500.8 ₹17,187.46 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 270.75 | kg | 174.58 ₹47,267.54 | 183.31 ₹49,631.18 | 162.36 ₹43,958.97 Lowest |
| 1.01 | OD506331/2025-2026:Providing and fixing 150 mm Square UPVC Gutter pipe over GI clamp of same profile @1 m centre to centre
DP observed data 16 | 5.2 | metre | 327.02 ₹1,700.5 | 343.37 ₹1,785.52 | 304.13 ₹1,581.48 Lowest |
| 1.01 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 104.72 | kg | 507.91 ₹53,190.37 | 533.32 ₹55,851.4 | 472.37 ₹49,468.48 Lowest |
Tender Value
₹5.8 L
EMD Value
₹14,599
Closing Date
19 Mar 2026, 6:00 pmClosed
assistant engineer
office of assistant engineer , kuttiyattur gp
building work
2026_LSGD_847088_1
tender 9 4
Open Tender
Civil Works - Buildings
Item Rate
120 days
KUTTIYATTUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,290
Yes
₹14,599
Yes
6 Jul 2026
12 Mar 2026
21 Mar 2026
12 Mar 2026
19 Mar 2026
12 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Building renovation | |||||
| 1.001 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil | - | sqm | - | - |
| 1.002 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1 | cum | - | - |
| 1.003 | OD506320/2025-2026:Dry laterite masonry for foundation and basement including cost and conveyance of all materials and all labour charges etc complete | 1 | cum | - | - |
| 1.004 | OD506325/2025-2026:Laterite masonry in cm 1:6 for foundation and basement including cost and conveyance of all materials and all labour charges etc complete | 1 | cum | - | - |
| 1.005 | OD506323/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearestsize in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. | - | cum | - | - |
| 1.006 | OD506329/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. (MOD 12.50 of DSR ) | - | sqm | - | - |
| 1.007 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.008 | OD506331/2025-2026:Providing and fixing 150 mm Square UPVC Gutter pipe over GI clamp of same profile @1 m centre to centre
DP observed data 16 | - | metre | - | - |
| 1.009 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 0.6 | kg | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1431305.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
viewsbd.pdf
Tender Documents • 1.63 MB
BOQ_1431305.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .