Compound Wall

Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2.00 in loamy and clayey soils like B.C. soils, red earth and ordinary gravelly soils (SS 20-B) including shoring, strutting, sheeting, planking including cost of hire charges of T & P, labour charges etc., complete for finished item of work for foundation of buildings. (APSS No. 308)

Filling in basement with HBG stone chips of 2.36 mm and below from an approved quarry/ available sources including all operational, incidenal, labour charges, sales tax and other taxes, hire charges of T & P etc., complete (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site etc., complete for finished item of work. (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using size 40 mm HBG metal from an approved quarry including cost and conveyance of allmaterials like cement, sand, coarse aggregate, water etc., to site including machine mixing charges and curing charges etc., complete for finished item of work for foundation concrete. (APSS No.402)

VRCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from an approved quarry using 340.00 kgs of cement/ 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Column Footings.

VRCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from an approved quarry using 340.00 kgs of cement/ 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Columns.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cms in thickness, consolidating each deposited layer by watering, ramming including cost and conveyance of water to work site and all opretional, incidental, labour charges , hire charges of T & P etc., complete for finished item of work (APSSNo. 309 & 310)

VRCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from an approved quarry using 340.00 kgs of cement/1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth Beam .

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars Fe 500 grade as per IS 1786-1979 of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with etc., including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work. ( APSS No.126)

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290 mm x 150 mm x 140 mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete and including overhead and contractors profit charges etc., complete for finished item of work for superstructure.

Supplying and fixing of MS Iron Window grills/ventilator grills/verandah grills/compound wall gate using MS angles/pipes for outer frame and fixing of MS square rods as safety rods in both directions including cost and conveyance of all materials, fabrication charges, fixing charges and including contractors profit and overhead charges etc., complete for finished item of work.

Normal Plastering with CM (1:5) mix 20 mm thickness in single coat for superstructure including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges and including contactors profit and ovehead charges etc., complete for finished item of work.

White washing two coats with Janathacem of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Painting to new exterior walls with two coats of plastic Emulsion Paints Asian/berger/Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making total three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing and contactors profit and ovehead charges etc., complete for finished item of work. (APSS No. 912)

Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2.00 in loamy and clayey soils like B.C. soils, red earth and ordinary gravelly soils (SS 20-B) including shoring, strutting, sheeting, planking including cost of hire charges of T & P, labour charges etc., complete for finished item of work for foundation of buildings. (APSS No. 308)

Filling in basement with HBG stone chips of 2.36 mm and below from an approved quarry/ available sources including all operational, incidenal, labour charges, sales tax and other taxes, hire charges of T & P etc., complete (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site etc., complete for finished item of work. (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using size 40 mm HBG metal from an approved quarry including cost and conveyance of allmaterials like cement, sand, coarse aggregate, water etc., to site including machine mixing charges and curing charges etc., complete for finished item of work for foundation concrete. (APSS No.402)

VRCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from an approved quarry using 340.00 kgs of cement/ 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Column Footings.

VRCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from an approved quarry using 340.00 kgs of cement/ 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Columns.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cms in thickness, consolidating each deposited layer by watering, ramming including cost and conveyance of water to work site and all opretional, incidental, labour charges , hire charges of T & P etc., complete for finished item of work (APSSNo. 309 & 310)

VRCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from an approved quarry using 340.00 kgs of cement/1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth Beam .

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars Fe 500 grade as per IS 1786-1979 of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with etc., including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work. ( APSS No.126)

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290 mm x 150 mm x 140 mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete and including overhead and contractors profit charges etc., complete for finished item of work for superstructure.

Supplying and fixing of MS Iron Window grills/ventilator grills/verandah grills/compound wall gate using MS angles/pipes for outer frame and fixing of MS square rods as safety rods in both directions including cost and conveyance of all materials, fabrication charges, fixing charges and including contractors profit and overhead charges etc., complete for finished item of work.

Normal Plastering with CM (1:5) mix 20 mm thickness in single coat for superstructure including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges and including contactors profit and ovehead charges etc., complete for finished item of work.

White washing two coats with Janathacem of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Painting to new exterior walls with two coats of plastic Emulsion Paints Asian/berger/Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making total three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing and contactors profit and ovehead charges etc., complete for finished item of work. (APSS No. 912)