SITC DG Set

Amount

SITC of 125 KVA, 415V, 50Hz, 3Ø silent new DG Set incl. full tank HSD oil, comprising of Engine, alternator, separate AMF panel, Base frame, Fuel tank, Battery,CPCB IV+ complient Engine & Acoustic Enclosure having following specifications :- ( Conformance Standards - IS/IEC 60034-1, IS/ISO 8528, ISO 3046) Engine:-Cummins/Catterpillar/Volvo Penta /Greaves / Kirloskar / Ashok Leyland / Mahindra. Engine Type : 4 Stroke Diesel Engine RPM : 1500 Output power : 155 BHP or Higher Duty : PRIME Cooling : Water cooled with radiator Cylinder : 4/ 6 in line Aspiration : Turbo Charged Type of Governor : Electronic Fuel Tank Capacity : Minimum capacity 230 Ltrs. Fuel Consumption at 75% rated Load with Radiator or Fan : 22.4 Ltr./ Hr. or Less. Fuel Consumption at 100% rated Load with Radiator or Fan : 30.34 Ltr./ Hr. or Less. Overload Capacity : 10% overload for one hour for every 12 hours continuous running at full load or better.

Engine instrument Panel : Consisting of starting switch with Key, Lube Oil Indicator, water temperature Indicator, RPM indicator and hour meter. Safety Controls : Emergency Stop, Low Lube Oil Pressure warning/ Shutdown, High Engine Water Temp. warning/ Shutdown, Sensor failure Indicator, Engine over speed indicator, Battery charging and low battery indicator. Exhaust Silencer : Residential Type Starting system : 12V/ 24 V. starting system complete with starter motor, charging alternator with rectifier and Cutout as per manufacturer standard. Battery : Lead Acid, Low Maintenance or SMF and conforming to relevant IS Specification with Low/High Battery Voltage and Weak Battery warning.

Alternator :- Make: Stamford/ Leroy Somer/ Kirloskar/ ABB/ GE/ Alsthom/ Crompton) Rating : 415 V, 3Ph. 50 Hz., 125 KVA, 1500 rpm Type : Brushless, self excited and self regulated Insulation : Class H Protection : screen-protected drip proof with Min.IP-23 degree of protection RPM : 1500 Voltage Regulation (max) : ±1% Winding connection : Star with Neutral Total distortion in output waveform : < 5%

Acoustic Enclosure :- The DG set should have integrated acoustic enclosure at the manufacturing state itself. High quality acoustic enclosure must be certified as per CPCB norms. Base Frame :- Common iron channel fabricated base frame containing the engine and alternator, mounted on AVM pads and having provision for lifting Hook. Terms & Conditions :- (i) All materials, equipments & accessories must conform to relevant IS specifications. The DG Set to be supplied must be from the authorized OEM of the respective Engine Manufacturer. (ii) Necessary manufacturer's test certificate for Diesel Engine, Alternator etc. Will have to submit in triplicate copy during delivery of the equipment. (iii) Copy of "Type Approval Certificate" and Certificate of "COP" must be produced at the time of delivery issued from competent Authority (As per CPCB Norms). (iv) Circuit Diagram for AMF Panel must be submitted from the Manufacturer/ OEM. (v) The entire set must be warranted at least 15 months from the date of Delivery/12 months/ 5000 Hrs from the date of Commissioning whichever is earlier. However Engine & Alternator should be warranted of 3 years/5000 Hrs, whichever is earlier.

S & F of Exhaust gas piping of 100 mm dia MS black class -B pipe welded incl. all necessary bend, support & clamps anti vibration mounting insulation of exhaust system with 50 mm thick mineral wool coverd with wire mesh and aluminium cladding (from DG set to top of the building plus 3 mtr. or as per CPCB ) FOR 125 KVA DG set as per direction of EIC.

Making insulation by 2" glass wool including netting arrangement and covered with aluminium clading as per direction of the EIC. a) 100 mm. (4 inch) dia exhaust pipe

S & Erection of special type supporting arrangement for Exhaust pipe line with necessary foundation work as required as per site condition incl. S & F special type MS angle iron bracket/flat of required size as per OEM design with necessary nuts, bolts, welding arrangement etc. as required for the above exhahaust piping arrangement.

S &F rain protection canopy for 150mm exhaust pipe mde of GI sheet of 16 SWG.

Supply & Laying of 1.1 KV Grade 10 Core 1.5 sq.mm PVC insulated. Copper conductor control Cable in partly recessed and partly by shaddle on wall to interconnect DG set with AMF Panel

Supply of 1.1 KV Grade 4 Core 120 sq.mm XLPE/PVC insulated. PVC sheathed, steel armoured Al. conductor Cable and conforming to IS: 7098(Part-I):1988/1554(Part-I):1988/ 5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984/ 3975:1970 /8130:1984/ 3961:1967/ 10418:1982/10810:1984 as amended upto date, in respect of component materials and tests. (Gloster / Havells / Plycab/ RR Kable )

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish as per GS. (a) Above 95 sqmm at an average depth of 100 mm in floor/ pavement/wall etc

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a) 4Core 120 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : (a) 4 Core 120 sqmm cable

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 x 19/10 stranded GI (Hot Dip) wire (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

G.G. PROJECT (BID ID -5588757)

Amaze Power (BID ID -5559954)

THE INDIAN OVERSEAS TRADING COMPANY (BID ID -5601324)

Sohum Industrial Sales Corporation (BID ID -5606999)