Rate Contract for Supply, Installation, Testing and Commissioning of 5 Years Operation & Maintenance work for Illumination of Heritage gate at various area in Central zone of Ahmedabad Municipal Corporation (A.M.C)

the Volume-I (Technical Bid only) of Office ofTender Officer,

Tender in HARD COPY Central Record Office, Mezzanine Floor,

Block-B, Sardar Patel Bhavan, Dana pith,

Ahmedabad-380 001, GUJARAT.

4 Date, Time & Place of OPENING of the 04/11/2026 at 16:00 Hrs.

Volume-I (TECHNICAL BID ONLY) of Online Opening in the Office of:

Tender Addl. Chief Engineer (Street Light/Tr.Signal),

Streetlight/Tr.Signal Department,

5th Floor “C”-Block, Sardar Patel Bhavan,

Dana pith, Ahmedabad-380 001, GUJARAT.

Place for HARD COPY Opening of Tender:

Office ofTender Officer,

Central Record Office, Mezzanine Floor,

Block-B, Sardar Patel Bhavan, Dana pith,

Ahmedabad-380 001, GUJARAT.

Municipal Commissioner

Ahmedabad Municipal Corporation

Sardar Patel Bhavan, Ahmedabad -

This section relates to specifications for supply (wherever called for), installation, connection,

testing and commissioning of Heritage light and installation of the project.

The job comprises of the following:

1.1 Liaison work

1.2 Supply and Laying of L.T XLPE Cables with cable end termination.

1.3 SITC of Heritage Lighting poles with bracket arms and cable junction box and other accessories as

described in the scope of work of VOL-1 and BOQ.

1.4 Wiring of the fixture.

1.5 Earthling system installation.

1.6 SITC of Light Fixture (Luminaries) on Heritage Light wiring and all other works as described in the

scope of work of VOL-1 and BOQ.

Signature of Tenderer : Additional Chief Engineer (Streetlight/Tr.Signal)

Name : Ahmedabad Municipal Corporation

Company’s seal :

Tender Document for Rate Contract for Supply, Installation, Testing and Commissioning of 5 Years

Operation & maintenance work for Illumination of Heritage Gate at various area in Central zone of

Ahmedabad Municipal Corporation (A.M.C)

Sr.No. Description Qty. Unit Rate Total

A JAMALPUR DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

3 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

4 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

5 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

6 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 200 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

7 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 200 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

9 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals 8 Nos 13

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

10 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

11 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

12 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

13 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

14 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

16 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

17 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 300 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

18 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts 200 Mtrs. 21

etc. complete of following sizes.(A) 25 mm

19 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

20 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

21 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

A. JAMALPUR DARWAJA

B KALUPUR DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Single LED of RGBW Chip integrated in it. The

luminaire’s shall be made of Extruded aluminum housing

powder coated in grey. The complete luminaire has IP66 &

IK07 protection and it comprises of high purity integrated

poly carbonate Lens.The LEDs shall have minimum CRI

≥80 (White Light) & shall have SDCM≤5. The luminaire

shall have system wattage 48 W and shall deliver

lumens. Beam angle of the Luminaire shall be 15 deg

.Fixture shall operating temperature range of 0°C to 45°C.

Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

3 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

4 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

5 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

6 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 200 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

7 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 200 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

9 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals 8 Nos 13

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

10 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

11 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

12 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

13 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation 3 Ea. 4,546

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soilLength of pipe - 1 MtrBack filling

compound - 1 Nos Bag of 15 Kg.

14 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS 100 Mtrs. 62

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

16 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

17 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 300 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

18 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

19 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

20 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

21 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

B.KALUPUR DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

3 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

4 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

5 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

6 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 400 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

7 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 300 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

9 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

10 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

11 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

12 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

13 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

14 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

16 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

17 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 550 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

18 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

19 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

20 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

21 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and 1 Nos 3,137

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

C. TEEN DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as 17 Nos 8,925

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

3 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

4 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

5 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

6 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 200 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

7 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 200 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

9 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

10 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

11 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

12 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

13 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

14 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering

&finishing complete.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

16 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

17 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 300 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

18 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

19 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

20 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

21 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

D. PREM DARWAJA

E RAIPUR DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

3 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

4 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

5 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

6 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 200 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

7 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 200 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable 8 Nos 38

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

9 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals 8 Nos 13

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

10 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

11 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

12 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

13 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

14 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

16 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

17 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 300 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

18 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

19 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

20 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V 1 Nos 2,255

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

21 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

E. RAIPUR DARWAJA

F SARANGPUR DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

3 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

4 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

5 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

6 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 250 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

7 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 200 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable 8 Nos 38

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

9 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals 8 Nos 13

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

10 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

11 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

12 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

13 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

14 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

16 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

17 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 350 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

18 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

19 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

20 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V 1 Nos 2,255

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

21 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

F. SARANGPUR DARWAJA

G KHANPUR DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Single LED of RGBW Chip integrated in it. The

luminaire’s shall be made of Extruded aluminum housing

powder coated in grey. The complete luminaire has IP66 &

IK07 protection and it comprises of high purity integrated

poly carbonate Lens.The LEDs shall have minimum CRI

≥80 (White Light) & shall have SDCM≤5. The luminaire

shall have system wattage 48 W and shall deliver

lumens. Beam angle of the Luminaire shall be 15 deg

.Fixture shall operating temperature range of 0°C to 45°C.

Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

3 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

4 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

5 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

6 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

7 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 300 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

8 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 200 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

9 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

10 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals 8 Nos 13

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

11 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

12 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

13 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

14 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

15 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

16 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

17 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

18 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 400 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

19 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

20 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

21 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

22 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

G. KHANPUR DARWAJA

H PANCHKUVA DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Single LED of RGBW Chip integrated in it. The

luminaire’s shall be made of Extruded aluminum housing

powder coated in grey. The complete luminaire has IP66 &

IK07 protection and it comprises of high purity integrated

poly carbonate Lens.The LEDs shall have minimum CRI

≥80 (White Light) & shall have SDCM≤5. The luminaire

shall have system wattage 48 W and shall deliver

lumens. Beam angle of the Luminaire shall be 15 deg

.Fixture shall operating temperature range of 0°C to 45°C.

Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

3 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

4 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

5 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

6 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

7 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 400 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

8 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 300 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

9 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

10 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals 8 Nos 13

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

11 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

12 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

13 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

14 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

15 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

16 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

17 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

18 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 600 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

19 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

20 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

21 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

22 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

H. PANCHKUVA DARWAJA

I ASTODIA DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

3 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

4 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

5 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

6 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 200 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

7 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 200 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

8 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

9 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals 8 Nos 13

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

10 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

11 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

12 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

13 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

14 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

15 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

16 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

17 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 300 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

18 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

19 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

20 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

I. ASTODIA DARWAJA

J DARIAPUR DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Single LED of RGBW Chip integrated in it. The

luminaire’s shall be made of Extruded aluminum housing

powder coated in grey. The complete luminaire has IP66 &

IK07 protection and it comprises of high purity integrated

poly carbonate Lens.The LEDs shall have minimum CRI

≥80 (White Light) & shall have SDCM≤5. The luminaire

shall have system wattage 48 W and shall deliver

lumens. Beam angle of the Luminaire shall be 15 deg

.Fixture shall operating temperature range of 0°C to 45°C.

Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

3 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

4 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

5 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

6 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

7 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 400 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

8 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 300 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

9 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

10 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals 8 Nos 13

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

11 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

12 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

13 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

14 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

15 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

16 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

17 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

18 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 600 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

19 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

20 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel Sq.

including cutting, bending, drilling, welding, riveting with Mtrs.

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

21 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

22 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

J. DARIAPUR DARWAJA

K DELHI DARWAJA

1 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Range are with Single LED of RGBW Chip integrated

in it. The luminaire’s shall be made of Extruded aluminum

housing powder coated in grey. The complete luminaire has

IP66 & IK07 protection and it comprises of high purity

integrated poly carbonate Lens.The LEDs shall have

minimum CRI ≥80 (White Light) & shall have SDCM≤5.

The luminaire shall have system wattage 60 W and shall

deliver 2400 lumens. Beam angle of the Luminaire shall be 40 Nos 65,450

15 deg .Fixture shall operating temperature range of 0°C to

45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

2 Supply, Installation, Testing & Commissioning of

mm RGBW Linear Wall Washer with Non-integral driver

& completely made in India luminaire. Fixture should be

with Single LED of RGBW Chip integrated in it. The

luminaire’s shall be made of Extruded aluminum housing

powder coated in grey. The complete luminaire has IP66 &

IK07 protection and it comprises of high purity integrated

poly carbonate Lens.The LEDs shall have minimum CRI

≥80 (White Light) & shall have SDCM≤5. The luminaire

shall have system wattage 48 W and shall deliver

lumens. Beam angle of the Luminaire shall be 15 deg

.Fixture shall operating temperature range of 0°C to 45°C.

Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder to avoid

additional wiring. The luminaire shall have declared life of

50,000 burning hours at L70. The luminaire shall be

compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of

RED, Green, Blue & White (W=4000K) to produce

16.7million colours.Luminaire and Driver must be made in

India with same brand. Luminaire manufacturer must have

In-house NABL accredited lab to conduct LM79. The

successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical

bid. LM80 , RoHS compliance issued by LED luminaire

manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed on each an every light fixtures.

Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

3 Supply, Installation, Testing & Commissioning of Isolated,

constant Voltage type 240 W LED Driver enclosure in

Extruded Aluminium metal enclosure . Driver shall be

made in India compatible for RGBW luminaires with

silicone potted and IP 66 Protected of same make as 27 Nos 8,925

luminaire. Output voltage of the driver 24Vdc. Driver

efficiency should be greater than 85% at full load, THD <

10%, PF > 0.95 with Under and Over Voltage Cutoff

Protection and 440V withstand for 8 hours

minimum &sould have large operating input voltage range

of 150V to 270V (nominal rated voltage – 240V) with 5KV

internal surge protection. LED driver shall have inbuilt

output short circuit, over voltage protection, Thermal

Shutdown protection.

4 Supply, installation, testing and Commissioning of 5Core

5C DMX cable/Patch cord Patch Endcap 1m

5 Supply, installation, testing and Commissioning of 5Core T

Type 5C DMX cable

6 Supply, Installation, Testing and commissioning of Wall

Mounted DMXLighting Controller, should be completely

made in India product. The TOUCH interface Controls one

universe with five pages of scene memory and instant

playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can

be connected to PC only to program and upload the scenes

to the controller through pixelerr software. There is no

mobile application for the touch controller as it is not

ethernet enabled. The pannel should have interna memory

of 4Mb and should be extendable upto 256 GB with Micro

SD Card. It has DMX In/Out, DMX Merge, DMX Trigger.

It has Time Clock setting adjustable in Stand Alone ,Play

Scene, Color, Speed, Dimmer, Zones or pages, Real Time

Clock and calendar for each scene (Hour, Day, Week,

Month, Year). It has IP rating of IP 40, operating at

temperature between -40 to 85 °C.The controller should

support Master/Slave mode with Up to 32 devices

combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

7 SITC of RS-485, 1 pair 24A WG (7 x 32) Tinned Copper,

PE Insulation, Overall Beldfoil Tinned Copper Braid(90%) 600 Mtrs. 115

Shield, PVC Outer jacket, CM. DMX Cable.

8 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing 300 Mtrs. 139

trench / pipe of following size of cables.(C) 4 Core

9 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(C) 2 to 4 core 10 Sq. mm

10 Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals 8 Nos 13

with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

11 Providing & erecting 415 V MCB Four Pole for Motor

&Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (B) 40 Amp. Cat III

12 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark, Cat III

13 Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having 1 Nos 2,611

characteristic of quick action & tripping with all advance

feature& do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

14 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

15 Providing ,erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of 20 Kg. 77

red oxide with erection on site as per direction of engineer

in charge with necessary grouting, cementing, plastering &

finishing complete.

16 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

17 Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

18 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as 800 Mtrs. 136

directed of following size.(E) 3 core 2.5 Sq. mm

19 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

20 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection

as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of. supplied

switch gears, BUSBARS, suitable size of inter connecting Sq.

PVC copper wire / copper-aluminium strips, rubber Mtrs.

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessaryventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (B) The

standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

21 Providing and erecting AC-3 duty 4 pole A.C. Coil with

NO & 2 NC aux contacts complete with 415V/220V

operating coil suitable for (L&T, BCH,T.C., Siemens, C&S

make). (B) for 40 A rating

22 Supplying & erecting approved make Astronomical Digital

time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with 14 1 Nos 3,137

memory programme, suitable to operate on 240V + 5%,

16A with, floating contacts Minimum switching setup time

1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

K. DELHI DARWAJA

L Miscellaneous Work (Including All Gates) : Supply and 1 Job

installation of MS/SS Structure made of square section / 8-

12 mm rods suitable to mount façade light fixture complete

to provied the mounting including paining of the structure

with appropriate shade of suitable colour as per client

requirement.(Charges includes all type of tools,

machinaries, hydraulic vehicle / hydra, fuel charges, labour

charges, liasoning charges etc)

M GOBO Projector for All Gates

1 The projector shall be an outdoor-rated, high-power LED- 11 Nos. 2,15,000

based gobo projection fixture suitable for architectural

illumination, heritage gate lighting, façade projection,

monuments, landmarks and other outdoor decorative

lighting applications. It shall be equipped with a minimum

150 W high-power LED light source, with maximum

power consumption of approximately 170 W, and shall

have a minimum IP66 ingress protection rating for reliable

outdoor operation. The fixture shall feature electronic zoom

with an adjustable beam angle of 20°–40°, a gobo system

comprising a minimum of four rotating gobo patterns plus

an open/white position with bidirectional rotation, a

dynamic animation wheel with adjustable bidirectional

rotation, and a four-facet prism with adjustable-speed

bidirectional rotation. It shall incorporate motorized linear

focus, 0–100% electronic dimming with 16-bit control, and

an adjustable strobe effect of up to 25 Hz.

M. GOBO Projector for All Gates

TOTAL A+B+C+D+E+F+G+H+I+J+K+L+M SITC AMOUNT

5 YEARS OPERATION & MAINTENANCE

TOTAL SITC AND O&M AMOUNT

( % Above OR Below : ............... in words .................................................) To be fill online only

Signature of Tenderer : Addl. Chief Engineer (St Light/Tr.Signal)

Company's seal: Ahmedabd Municipal Corporation