Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹20.3 LAccepted-AOC AL MAKHAM COTTAGE KRISHNAPURAM KAYAMKULAM | KOTTAYAM | KERALA | 686102 | ₹20.3 L | l1 | Accepted-AOC l1 |
| 2 | l2₹20.4 L+₹9,752.65 (0.48%)Rejected-AOC | ₹20.4 L+₹9,752.65 (0.48%) | l2 | Rejected-AOC l2 |
| Sl No | Description | Qty | Unit | Unnikrishnan P S L2 | ABDUL MAJEED KHAN M I L1 |
|---|---|---|---|---|---|
| 1.00Building Maintenance | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.49 | cum | 326 ₹161.37 Lowest | 359.72 ₹178.06 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.07 | cum | 8,496 ₹9,124.7 Lowest | 9,235.97 ₹9,919.43 |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 1.32 | sqm | 351 ₹463.32 Lowest | 386.16 ₹509.73 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 516.59 | kg | 211 ₹1,09,000.49 | 187.05 ₹96,628.16 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 346.86 | kg | 172 ₹59,659.92 Lowest | 187.05 ₹64,880.16 |
| 1.01 | OD328965/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required.Details of cost for 216.14 sqm (External dimension of plinth). Area of roof = 20.2x10.70 m =
216.14 sqm. | 230.79 | sqm | 571 ₹1,31,781.09 Lowest | 621.1 ₹1,43,343.67 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 6 | metre | 519 ₹3,114 Lowest | 565.05 ₹3,390.3 |
| 1.01 | 50.12.2.3:Providing & fixing poly carbonate multi wall plain sheet 5 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required. | 55.48 | sqm | 759 ₹42,109.32 Lowest | 826.33 ₹45,844.79 |
| 1.01 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 0.53 | cum | 6,284 ₹3,311.67 Lowest | 6,831.14 ₹3,600.01 |
Tender Value
₹22.2 L
EMD Value
₹50,000
Closing Date
13 Nov 2025, 5:00 pmClosed
George Thomas Chirayil
Office of the Assistant Engineer, LIDEW Section, Chettikulangara Grama Panchayat
Renovation of Panchayat Office 2025-26 in Chettikulangara GP-proj numbr 287
2025_LSGD_819159_2
07/2025-26/AE/LIDEW/CHTGP/1 PHASE
Open Tender
Civil Works - Buildings
Item Rate
180 days
Chettikulangara GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹50,000
Yes
28 Feb 2026
6 Nov 2025
15 Nov 2025
6 Nov 2025
13 Nov 2025
6 Nov 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.16 MB
Tendernotice_2.pdf
PDF • 0.03 MB
Tendernotice_3.pdf
PDF • 0.03 MB
BOQ_1373773.xls
BOQ • 0.34 MB
affidavit.pdf
Tender Documents • 0.06 MB
viewsbd.pdf
Tender Documents • 3.30 MB
pa.pdf
Tender Documents • 0.03 MB
fot.pdf
Tender Documents • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .