ADDN/ALTN TO SMQ AT RP AREA AT STN HALWARA

Amount

Taking down cement plaster of any description thickness including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles etc complete all as specified and directed.

M&L for Brick work with sub class ‘B’ brick, straight or curved in plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on Brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

All as per Srl item No 4 above but rendering in 02 coats i.e 1st coat of 10 mm thick in CM (1:6) and than 5mm thick in CM (1:4) as a 2nd coat of rendering with WPC complete all as specified and directed. (Note : WPC will be paid separately)

M&L for preparation of new surface of wall and applying two coat of distemper oil emulsion over a coat primer over 1mm thick plaster of paris putty complete all as specified and directed.

M&L for complete removal of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy pots and applying two coat of distemper oil emulsion over a coat of primer above 2 to 3mm thick wall care putty complete all as specified and directed.

M&L for prepration of new plastered surfaces of wall and applying two coats of weather proof emulsion paint over a coat of primer complete all as specified and directed.

M&L for complete removal of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of weather proof emulsion paint over a coat of primer complete all as specified and directed.

M&L for plastering 5mm thick in cement mortar (1:3) finished even & smooth without using extra cement as on ceiling complete all as specified.

M&L for prepration of new surfaces of brick/concrete surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for prepration of old brick/concrete surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing incl removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 300x450mmx 6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid jointless ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, set in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed.

M&L for Non skid jointless glazed cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, set in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM (1:6) as in floor for laying floor tiles complete all as specified and directed. (In Ground Floor only)

M&L for 15mm thick screed bed or bedding layer in CM (1:6) mixed with WPC as in floor for laying floor tiles complete all as specified. (WPC shall be measured and paid separately) (In First Floor only)

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame of area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame of area not exc 1.5 Sqm each complete all as specified and directed.

Refixing of shutter in other opening exc 1sqm but not exc 2 Sqm each in area incl including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and directed.

S&F Factory made single extruded WPC (Wood polymer Composite) Solid door/window/ceosetory window/ & other frames/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 Kg /cum, screw withdrawal strenght of 2200N (face) & 1100N (Edge), minimum compressive strength of 58 N/mm Sqr, modules of elasticity 900 N/mm Sqr and resistance to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in positon with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as specified and directed. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately).

S&F factory made pressed steel frames of size 125x60mm for doors made out of PBC sheet 1.25mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc. complete all as specified and directed.

S&F factory made pressed steel frames of size 105x60mm for doors made out of PBC sheet 1.25mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc. complete all as specified and directed.

S&F mild steel flat iron of required dimentions as in holdfast or similar works including screwing or welding at site compelte all as specified and directed.

M&L for PCC 1:3:6 type C1 as in hold fast for pressed steel frames and back filling of pressed steel frames or similar works complete all as specified and directed.

S&F 35 mm thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial ply 12mm thick veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified and directed.

S&F 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I complete all as speciified and directed.

S&F Rolled Formed ECCO-4000 Steel window/ventilators (Double rebated) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS 513 "D" quality galvanised as per IS 277 with Zinc of 120gms/Sq.mtr) with total coated thickness of 0.6mm and section of frame should be of 72mm x 55mm, section for mullion should be cf 72mm x 50mm, section for shutter frame should be of 47mm x 20mm, section for fixed glass bead should be of 12mm x 12mm and section for fly mesh should be of 40mm x 20mm, coated section should be with primer coat of Epoxy primer of 5-7 microns thick, finish painted with polyester upto 50-60 microns thick including 5mm thick plain glass stainless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch and grill made of 10mm sq MS bars welded to at 150mm center to center, 6mm x 12mm MS flat (total grill unit should be power coated and fixed to window frame with screws) (a) FIXING DETAILS :- Section for frame Glazed shutter and Mesh shutters should be cut to lenght and miter joined with polyropylene cornar brackets, mullion section should be joined with Frame /Mullion using Mullion Cap ethyl proplene damein monomer (EPDM) gasket should be used all around glass in shutter and fixing glass rubber, Gasket should be around glass in shutter and fixed glass. rubber gasket should be used around fly mesh to fix mesh in mesh shutter. (b) ACCESSORIES :- Each glazed shutter and mesh shutter should be provided with SS pivot hinges- 1 set, seccolor stay. window frame should be fixed to brick/concrete masonry by using Nylon self expanding caps and driving MS electoplated 80mm long screw into the caps through frame complete all as specified and directed.

S&F Solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube but single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed.

S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with Single Side Prelam PVC sheet instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm and 90 degree bent edge complete all as specified and directed. (Note:- PVC door shall be provided in bath/WC & Cubboard)

S&F hasp and staple safety type aluminium anodised with mild steel hinges pin including bolt to hing plate and fixed with screw size 125mm complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tined tacks or galvanised wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tined tacks or galvanised wire staples complete all as specified and directed.

S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 50 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 2nd class HW small fittings such as brackets of any type, latch and hing block, saved door and window stops and the like including all necessary labours articles n exc 200 cu cm each complete all as specified and directed.

S&F Floor doors stoppers 150mm long of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repair floor doors stoppers 150mm long of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 200mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long Aluminium handles cast type anodised complete all as specified and directed.

S&F 300mm long aluminum anodised sliding door bolts, Aluminium alloy, door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium complete all as specified and directed.

S&F MS 300mm ordinary rat tail rod type door spring patteren including roller and roller plate complete all as specified and directed.

M&L for preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for prepraration of old or previously untreated surfaces of wood and applying one coats of synthitic enamel paint complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors or concealed complete all as specified and directed.

S&F 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repair 15mm PTMT bib tap standard of any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.

S&F in repair 15mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed.

S&F in repair 20 mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed.

All as per Srl Item No. 53 above but fancy type PTMT with long shank and cup, concealed type complete all as specified and directed.

S&F in repair Orrisa pattern WC vitreous china white of size 580mmx440mm incl provision of lime concrete bedding incl taking down of existing damaged WC seat and connecting flush pipe etc complete all as specified and directed.

S&F in repair PVC connection 450 mm long, 15mm bore size with PTMT nuts complete all as specified and directed.

S&F in repair 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and directed.

S&F in repair swivel shower with shower arm PTMT 15mm bore size of any colour complete all as specified and directed.

S&F vitreous china wash basin, white corner type of size 450x390mm excluding taps, waste chain, waste pipe and plug and proclain stopper but including bracket complete all as specified and directed.

S&F in repair fancy type Pillar taps, 15mm bore of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete all as specified and directed.

M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410-W Gde E-250 quality A complete all as specified and directed.

M&L for 0.63 mm thick MS plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required confirming to Fe-410-W Gde E-250 complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for prepraration of old or previously untreated surfaces of steel and applying one coats of synthetic enamel paint complete all as specified and directed.

Demolotion of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed..

M&L for granite slab (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 15mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture and pigment to match the shade of granite complete all as specified and directed.

Rounding edges of stone slabs as in steps, cooking platform, and other similar situation complete all as specified and directed.

M&L for machine cut kota stone slab 18 to 20 mm thick as in flooring / stair case landing, laid over & incl 15mm thick cement screed base in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. (Note:- Single pieces to be used in trads & 3 Nos of V-grov is to be made on the edges)

M&L for machine cut kota stone slab 18 to 20 mm thick as in skirting/ steps/floor laid over & incl 10mm thick cement screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. (Note:- Single piece in riser is to be provided)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC(SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC(SWR) junction double,(Single T), equal or unequal 110 mm dia, with acess door complete all as specified and directed.

S&F PVC(SWR) junction double, (double Y), equal or unequal 75 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

S&F in repair 75mm dia PVC floor trap with CP grating including jointing to waste pipe with cement solvent complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 as in plinth protection/floor sub base or similar works complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 Type D-2 using 40mm crushed stone aggregate as in sub base floor or similar works complete all as specified and directed.

M&L for Sand filling under floors or in foundations incl. watering and consolidation complete all as specified and directed.

M&L for 60mm thick rubber finished interlocking paver block fixed with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-35 Grade of approved by colour and pattern laid in flooring and joints filled/broomed with fine sand complete all as specified and directed.

Demolition for cement conc exc 15cm thickness but above ground floor as sunken floor or similar works/position complete all as specified and directed.

M&L for cement concrete type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken floors or similar works complete all as specified and directed..

M&L for 25 mm thick cement concrete type B1 (1:2:4) using (20mm graded stone aggregate) as in floors or similar surfaces finished even to receive floor tiles complete all as specified and directed.

M&L for applying two coats of water proofing compound of approved make and as per manufacturer's instruction on the entire surface of sunken portion or similar surfaces complete all as specified and directed.

M&L for 15mm thick cement screed in CM 1:3 admixed with integrated water proofing compound of approved make and as per manufacturer's instrution complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC (1;2:4) type B-1 using 20mm graded stone aggregete as in roof kerbs or mud stops, rounded or chamfered on edges or similar works complete all as specified and directed.

M&L for providing a layer of cement slurry by brushing @ 3kg of cement per sqm area at top and bottom of base coat and cleaning top surface prior to receiving the specialized topping complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, using 20mm graded aggregate as in padding with average 40 mm thick to be provided in slope complete all as specified and directed.

M&L for plastering 10mm thick in CM 1:4 mixed with WPC over cleaned concrete surfaces complete all as specified and directed. (Note: - WPC measured and paid separately)

Supply only integral waterproofing compound of approved made complete all as specifed and directed.

M&L for APP Polymeric water proofing treatment with mineral finish to roof, at any height using membrane minimum 3mm thick and weighting not less than 3.6 Kg per sqm, black finish reinforced with non-woven polyster matt weighting not less than 150 gms per sqm with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 ltr per sqm, torching ovarlaps with a propane or butane gas torch with a overlap of 100mm at the side on transverse direction and 150mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 kg per sqm below APP complete all as specified and directed. (Note: The APP Treatment shall be done by authroized applicator duly approved by GE/Engg-in-Charge.)

M&L for factory made cement concrete tiles of size 30cm x 30cm x 22mm thick , set, jointed & pointed in neat cement slurry in floors/roof with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 complete all as specified and directed.

M&L for preparation of roof top surfaces by providing and applying UV stable single component fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having Sun Reflectivity Index (SRI) of 106 on top of conrete roof surfaces in three coat including self primer at ratio 3:1 and coverage @ 1 Ltr / 1 Sqm with a thickness of 650 micron, the vital physical and chemical parameters shall be as under : Min Elongation at break of 350%, Resists positive hydrostatic pressure of upto 10 bars, crack bridging ability of 2.5 mm at 650 microns. The material shall be applied with brush or roller, complete in all respect as per the direction of Engineer in Charge/Authorized Applicator. (Note : 6 Hrs interval between two coat will be maintained & the work will be carried out through Company applicator duly approved by GE/Engg-in-Charge in writing before incorporation) and will be Paid only after receiving of the warrenty certificate from the Company. Make : Asian paint/Pidilite/Fosroc or equivalent as approved by GE.

Demolition on reinforced cement concrete of any description and in any position not otherwise specficially provided for complete all as specified and directed.

M&L for Precast cement concrete in RCC (1:2:4), type B1 (using 20 mm graded stone aggregate) as in cover slab for tank staging, manhole cover and similar article with plain face, set in cement mortar 1:4 complete all as specified and directed.

M&L for 10mm dia and over TMT bars cut to length bent to shape reqd including cranking ,bending spirally for hooping for columns, hooking bends including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling, derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement morter 1:3 using coarse sand in patches area n.exc 5 Sqm and thickness of RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with 6mm teak wood lipping fixed with nails complete all as specified and directed.

S&F Moulding section exc.13 & n.exc.25 sqcm in area as in cornices, picture rails and the like fixed with screws complete all as specified and directed.

S&F 40mm flap width continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F Aluminium handles cast type anodised 100mm long complete all as specified and directed.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

S&F rolled Mild steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks (coolar stand) and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm but not exc 20 cm girth complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sun shedes covering to wall, fixed with self tapping screws complete all as specified and directed.

Raking out existing filling from construction /chrumble joints of width exceeding 40mm and n. exc 65mm, upto required depth as specified by special tools like concrete cutter, wire/coir brushes/machines and joint cleaned thorowghly with application of compressed air, making free from all the loose material i.e dirt, dust, grease, existing sealing compound, filler board (as required ) including aluminum sheet of existing compound racked upto full depth of joints etc and M&L for filling with seltex board with polyurethane joint sealant single component to a depth 10 mm depth above the backup rod with minimum perforamnce guarantee of 05 yrs and minimum movement accomodation factor (maf)+/-30 % confirming to the requirement of BS :5212 and EN-141875-2003 for hydrolysis/water resistance test including two coats pf primer and filling the balanced racked depth of joints with backup material packing , so that no gaps or void exist at the top of backup material separated by bond breaker tape over suitable size HD 10 filler board in position where requied and as per maufacturer's instructions complete all as specified and directed.

S&F plain 0.56mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) as in roof or fixed to walls complete all as specified and directed.

S&F in repair 750 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of any description and removing the debris away from the site complete all as specified and directed.

S&F in repair 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high density polythene float ball and fly nut screwed for iron pipe complete all as specified and directed.

S&F in repairs stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm with fixing arrangements complete all as specified and as directed..

S&F in repairs harrison rails, anodised alluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F in repair SS sinks made of 1mm thick SS Sheet for kitchen or laboratory with plugs,waste pipe,washers and waste including cast iron cantilever brackets connecting union etc over all size 495mm x 420mm with bowl size 410mm x 330mm x160 mm complete all as specified and directed.

Taking down aluminium / copper point wiring with surface/ concealed stove enamelled steel/ PVC conduit or wooden batten (light points one/ two way, fan, socket, or power points) including sunk in cast iron / pressed steel terminal boxes such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for concealed Point wiring for light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in PVC conduit not less than 19/20 mm dia with all fittings shunk in MS Pressed steel terminal boxes at suitable depth of 1.6mm thick (duly painted with two coat of anticorrosive paint outsite and Aluminium paint inside) with top cover 2.8 mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc complete all as specified and directed. Note:- Cost of cutting of chases wherever required in walls/ floors is deemed to be included in the unit rate of point wiring.

All as per item No. 125 above but for ceiling Fan, one point controlled by one switch on the same board complete all as specified and directed.

All as per item No. 125 above but for Exhaust Fan point, one point controlled by one switch on the same board complete all as specified and directed.

All as per item No. 125 above but for one socket outlet 5 Amps controlled by one switch on the same board complete all as specified and directed.

All as per item No. 125 above but for One socket outlet 5 Amps controlled by one switch on independent board complete all as specified and directed.

All as per item No. 125 above but for one call/bell point controlled by one switch complete all as specified and directed.

All as per item No. 125 above but for One light point controlled by two 2 - way switches complete all as specified and directed.

All as per item No. 125 above but for one 15 Amps socket outlet on independent board with 2 runs of 4.0 sqmm cable and 4.0 sqmm PVC insulated multisranded copper FRLS conductor cable as continuous earth wire complete all as specified and directed.

S&F Switch piano type one way 5 amps 240 volts complete all as specified and directed.

S&F Bell push flush type 5 amps 240 volts complete all as specified and directed.

S&F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S&F Switch piano type 2 way 5 amps 230 volts complete all as specified and directed.

S&F Switch piano flush button single pole one way 15 amps 240 volts complete all as specified and directed.

S&F Socket out let 2 in 1, 6 pin, 5 and 15 amps multi purpose flush type, 240 volts complete all as specified and directed.

S&F electronic fan regulator step type complete all as specified and directed.

S&F ceiling rose surface bakelite 2 to 3 terminals 65 x 50mm, complete all as specified and as directed.

S&F in replacement LED light fitting, 20 W, 4 ft long 230V, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

All as per Srl item No 141 above but LED light fitting 2 Feet long, 10 Watt LED Batten light for mirror and as wall light application complete all as specified and as directed.

S&F in replacement bldg security light fitting 15W LED New generation Energy Saving & Environment friendly long life versatile pressure die-cast aluminium IP-66 roadway luminars with high power LEDs as light source and electronic drive including mounting bracket, GI pipe 40/32 mm dia medium grade for mounting bracket bent to shape upto 1.50 meter length and fixing arrangement with two Nos of MS clamps set, nut, bolts, washers, and applying two coats of aluminium paints over one coat of Zinc oxide primer complete all as specified and as directed.

S&F in replacement Ventilating/Exhaust fan 250 mm sweep, Plastic body, motor speed rate 900 RPM, copper winding, single phase 230 volt, PVC Gravity Shutter, and colour white with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

M&L in repair for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed copper conductor cable with size 04 Sqmm and drawing through & including Non metallic PVC rigid conduit concealed in wall including earth continuity conductor of size 04 Sqmm PVC insulated unsheathed multi stranded copper conductor cable with suitable size of PVC Conduit as per IS , Not less than 25 mm and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main distribution board complete all as specified and directed. Note:- Two run of 04 Sqmm PVC wire one run of 04 Sqmm earth continuty wire and one run of PVC conduit Will be measured and paid as single unit .

All as per Srl item No.145 above but sub main wiring of size 6sqmm complete all as specified and directed.

S&F in repair sheet metal enclosure with metal clad socket & plug top and including MCB single pole neutral 20 Amps complete all as specified and directed.

S&F in repair sheet metal enclosure MCB SPN distribution board, 8 way, Double door with IP-43 protection single phase 240 volts, including suitable size copper bus bar and neutral link fixed flush concealed in wall including taking out old DB's and chases wall for fixing DB and making good distributed wall/surfaces to match with existing specification complete all as specified and directed.

S&F 'B' series MCB SPN 40 amps, 240 volts, 50Hz complete all as specified and directed.

S&F 'B' series MCB SP 6 to 32 amps, 240 volts, 50Hz complete all as specified and directed.

S&F door bell, Ding Dong AC, 240 volts, single pole complete all as specified and directed.

Taking down carefully existing storage type water heater (Geyser) deposit to MES Yeard and re-hanging the same after necessary repairs including transport, labour and conneting with water connection pipe & electrical connection complete all as specified and directed.

S&F in replacement water connection pipe, heavy duty PVC connection pipe of size 15mm x 450mm for hot water connection for storage type water heater complete all as specified and directed.

Taking down carefully existing ceiling fan and Exhaust fan any size/ sweep and deposit to MES Yard and re-hanging the same after complete rewiring including transport and conneting the fan with 2 core flexible copper cable 23/0.0076 of required length connecting with ceiling rose complete all as specified and directed.

Taking down carefully existing electric energy meter from site and deposit to MES Yard complete all as specified and directed.

All as per Srl iten no. 156 above but to accommodate 2 Nos energy meter with 2 Nos 40 Amps SPN MCB complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvinised iron or steel and other end of the earth connected to panel and protected by GI pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

Supply, Installation, testing & commissioning of AC static single phase 2 wire prepaid smart energy meters (AC static watt hour meter) with time of use register, internal connect and disconnect switches with bi-directional communication facility and remote connect/disconnect switch confirming to IS 16444:2015 (Re-affirmed 2020) Part-I with meter board having only three mode of communication PLC (Power Line communication), RF and cellular network (3G/4G technology) or strictly as per guidelines issued for mode of communication by CEA in 2018. The meter shall communicate with Head End System (HES) in a secure manner. Smart meters shall have pre-payment feature. Software has to be audited by CERT-in empanelled firm as well as clearance for Air HQ Cyper agency and cost of audit is deemed to be included in quoted rate. Smart energy meter shall have current range 05A to 60A, 240V and accuracy class-1.0 alongwith inbuilt load control switch containing provision for ToD, capable to define multiple tarrif slabs, happy hour and holiday defination as directed by Engg-in-Charge.

The smart meter would have the following minimum basic features:- a) Measurement of electrical energy parameters. (b) Bi-directional communication. (c) Integrated load limiting/connect/disconnect switch. d) Tamper event detection, recording and reporting with anti-tamper features.(e) Power event alarm as per IS 16444 (Part-I). (f) TOD features. (g) Net metering (KWH Features) (Optional as per requirement of utility). (h) On demand reading. (i) Smart meters shall be type tested for all the test as per IS:16444 Part-I (Latest version) and type test report shall be provided. (j) Prepaid meter data display should be in mode Auto Scroll/Scroll with Push Button.(k) General Standard applicable for meters:- S.no Standard No. Title (i) IS 13779 with latest amendments AC Static Watt-hour class 1&2 (ii) IS 15884 with latest amendments AC Direct connected static Pre payment meters for active (iii) IS 16444 Part-I with latest AC Static Direct Connected WH amendments Smart Meter Class 1&2 (iv) IS 15959 Part-I & 2 with Data exchange for electricity latest amendments Meter reading, Tariff and load Control Companion Standard (v) Displayed Parameters - Internal Diagnostics - Meter Serial No - Last Month cumulative KWH - Last Month MD in KW - Current Month Avg P Factor - Last Month Avg P Factor (vi) Connection Diagram As per IS 16444 Part-I

M&L for connecting of 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm nominal cross section 4 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers testing and commissioning complete all as specified including taking out existing unserviceable cable from trenches, floor, ducts, poles or roads complete all as specified and directed. (Earth work shall be measured and paid separately).

Excavation in trenches in any type of soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable etc. and getting out complete all as specified and directed.

M&L for dry Sand cushioning to underground electric cable 8cm below and 15 cm above the cable complete all as specified in clause 19.75 of SSR Part-I and directed. Note:- (i) Sand shall be fine sand as specfied in clause 14.5 of SSR Part-I. (ii) Punned thickness shall be measured.

Supply and laying of brick protection with sub class 'B' bricks laid dry flat 23cm in width over sand cushioning in trenches as perpendicular to the direction of underground cable complete all as specified.

Returning, filling in approved excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

S&F GI pipe 40mm dia bore light grade with all fittings for cable protection, and fixed complete to wall, panel, pole or laid in trenches and road crossing complete all as specified and directed.

Taking up or down 25mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 25mm bore GI water tubing medium grade galvanized with all fittings complete fixed to wall, floor or ceiling complete all as specifed and directed.

S&F 20mm bore GI water tubing medium grade galvanized with all fittings complete fixed to wall, floor or ceiling complete all as specifed and directed.

BEHL AND COMPANY

M/s R.N Construction Co.

SATISH AND CO

M/s R. Krishan and Co.

M/S SANGA SINGH AND CO

CHOUDHARY ENTERPRISES