DEPOSIT-Naranathuchira Mechanical shutters motorizing-Supply, fabrication, painting and erection of new geared motor unit and accessories for motorizing 8nos mechanical shutters of Naranathuchira at Mankada Block Panchayat, Malappuram - General

Amount

Supply, fabrication, painting and erection of geared motor unit and accessories for motorizing 8nos regulator shutters

OD27045/2024-2025:Providing with TEMPORARY PLATFORM for the repair works of operating platform including the cost of material charge, handling charges, assembling and dismantling etc. complete [40 times usage as life period (assumed) for these materials, hence cost for 1 time used]

OD27037/2024-2025:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD27032/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD27036/2024-2025:Supply of MS round bar including cost of conveyance charges

OD34981/2025-2026:Supply and erection of flanged coupling with proper fasteners.

OD27039/2024-2025:Supply of MS BOLT and NUT up to 300mm Length including cost of conveyance.

OD27038/2024-2025:Fabrication and supply of Structural steel for Motor-gear box unit frame ( Up to 2 tonne weight ) and accessories etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD27033/2024-2025:Erection of the steel structures for motor-gear box unit frame in correct alignment and anchoring it ; setting and aligning the covers of the unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD27035/2024-2025:Supply and fixing of 3 HP MOTOR and REDUCTION GEAR UNIT driven through self locking worm reducer, coupling mechanism for engaging/disengaging including cost of all materials, labour, hire charges and conveyance.

OD27031/2024-2025:Supplying and fixing of MAIN PANEL BOARD including electrical accessories etc. complete including cost of materials, labour, incidental charges etc.

OD27040/2024-2025:Supplying and fixing of individual STARTER BOARD including cost of all labour, materials, incidental charges etc.

OD27034/2024-2025:ASSEMBLING the Motor and gear box mechanism to the bridge and conducting TRIAL RUN.

Overcoat painting of 9nos regulator shutters and hoisting bridge and greasing of the screw rods

OD27757/2024-2025:Over coat painting the regulator gates and embedded parts with two coats of epoxy tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns, after cleaning the surface using high pressure water jet including cost of materials, labour charges, cost of testing all painting materials, incidental charges, hire of T&P etc. complete as per the direction of department officers at site.

OD27758/2024-2025:Painting all the exposed surfaces of the Hoisting bridge and its hand rails etc. with two coats of EPOXY PAINT over two coats of epoxy primer (at corroded areas) after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of Tools and Plants etc. complete as per the direction of department officers at site.

OD28146/2024-2025:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE (Data for 1m)

Kinanath V P (BID ID -2455269)

Bidder Name

Kinanath V P

MANAF V