PROVN OF CERTAIN SANCTIONED B/R AND E/M WORKS UNDER GE (S) TEZPUR (PHASE-II)

Amount

Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in soft/lose soil. for fdn etc.,complete all as specified and as directed.

Add to items 02 for each additional 1.5 m or part thereof in depth beyond the first 1.5m, complete all as specified and as directed.

Returning, filling incl spreading leveling watering and well ramming in layers not exc 25 cm for soft/lose soil, completeall as specified and as directed.

Removing excavated material n exc.50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and as directed.

M & L for Cement concrete in foundations , filling and mass concrete type D-2, 1:4:8, complete all as specified and as directed.

M & L for Hard core of gauge not exc 63mm with broken bricks deposited spread & leveled in layers n.exc 15cm thick, watered & rammed to a true surface, complete all as specified and as directed.

M&L 100 mm thick, cement concterte type D-2 (1:4:8) 40mm graded aggregate as in sub base complete all as specified and as directed.

M/L PCC 1:3:6 type C1 20mm grade aggregate as in , coping/hold fast or similar work, complete all as specified and as directed.

Dismantling wrought iron or mild steel work or any description as in door, gates, etc and similar works, complete all as specified and as directed.

S&F steel work in tubular truss & vertical post of different size bend to shape, cut to length etc, including necessary welding, special shape washer, conforming to IS:1161-1998 grade St-240 Complete all as specified and as directed.

S&F for MS plates as in cleats, base plates, purlins etc of Gde Fe-410-W(gde-E-250), complete all as specified and as directed.

M&L for precast cement concrete type B1 1:2:4 ( 20 mm graded aggregate) as in manhole cover for drain, coping, set in CM (1:4) etc incl necessary formwork complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position in frame work or in unframed work.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts. All as specified and as directed by Engineer-in-charge.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of bed blocks for hold fasts all as specified and as directed.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each , complete all as specified and as directed.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc, complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supply and fixing in opening as per specification.

Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, paneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvent cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspender including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress complete all as directed.

S&F 100mm Butt hinges medium weight cold rolled mild steel Complete all as specified and as directed.

S&F 150mm long aluminium handle, cast type, anodised completer all as specified and directed.

S&F 100mm long extruded aluminium alloy handles fabricated type, anodised, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws, complete all as specified and as directed.

S&F in repair 250mm ordinary type mild steel rat tail rod pattern springs including roller and roller plate Complete all as specified and as directed.

Roughening surfaces of old concconcrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0kg of cement per sq meter complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or colored cement to match over 10mm screed bed in Cement mortar 1:3 , complete all as specified and as directed.

Non - skid Ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over 15mm tick screed bed in cement mortar (1:4) complete all as specified and as directed

Non - skid Ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over 10mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) any shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over 15mm thick screed bed in CM 1:4, complete all as specified and as directed.

All as per item No 34 above but in skirting over 10mm thick screed bed in cement mortar 1:3

M&L Machine pressed precast concrete interlocking paver block (Glazed finish) with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-30 Grade complete all as specified and directed

M&L 16 to 20mm thick Granite of any colour and type (table rubbed and polished) for wall lining including over cement mortar (1:3) and pointing with white cement and admixture to match the colour of granite including cutting and edge moulding and rendering 15mm thick cement plater in CM (1:4) over brick/concrete surface, completeall as specified and as directed.

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern )but including seat cover white closed type and flush pipe complete all as specified and directed

Supply and fix, as in repair, vitreous china wash basin, white, oval type size 550 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, with anchor bolts 2 Nos cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

Supply and fix, bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified

S&F in repairs kitchen plate rack made out of stainless steel 0.60 mm thick sheet with partitions and size of rack 750 x 600 x 250 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed.

Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed.

Supply and fix,as in repair, CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed.

Supply and fix, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

Supply and fix,as in repair, 40 mm dia PVC 610 mm long waste pipe suitable for Sink complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.

Supply and fix10 ltr capacity PVC valve less symphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle with 32 mm dia flush pipe including brackets complete all as specified and directed.

S&F of 15 mm bore tubes medium grade galvanized with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor including taking up or down complete all as specified and directed,

S&F of 20 mm bore tubes medium grade galvanized with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor including taking up or down complete all as specified and directed,

S&F wall mixer 3-in-1 CP 15mm bore including 100 to125 mm dia overhead shower, complete with 15mm ling bend pipe and wall flange including making good wall surface with matching tiles complete all as specified and directed.

Supply and fix, as in repair, Overhead Shower 125 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubin Cleaning System, including fixing to steel pipe or union of 15mm bore all as specified and directed. Essco Cat No Eos-542A or equivalent make of Prayag,Parryware

Supply and fix15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed.

Supply and fix, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.20 to 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S& F in repair of Towel Ring of stainless steel fixed and including Chromium plated brass screws complete all as specified and directed.

S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws, complete all as specified and as directed.

Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed.

Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed.

S&F for PVC (SWR) with access door bend 110mm dia, complete all as specified and as directed.

S&F for PVC (SWR) with access door bend 75 mm dia, complete all as specified and as directed.

S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore, complete all as specified and as directed.

Supply and laying of RCC class NP2 pipes of dia 300 mm jointed & laid complete with collar with proper slope ,tested as specified and instructions of Engineer-In-Charge, complete all as specified and as directed.

Supply and fix, steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

S&F 4 mm thick figured glass, pin head type in square or rectangle not exc 0.50 sqm in each pane complete all as specified and directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr and every corner and filled with bituminous filler complete all as specified and as directed.

M&L for 100 mm thick PCC 1:3:6 type C2 using (40 mm graded aggregate) as in path/paving's including finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specified and as directed.

M/L PCC 1:2:4 as Damp proof course 25 mm thick to horizontal or vertical surfaces including necessary formwork and Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m Complete all as specified and as directed.

Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent Complete all as specified and as directed.

M&L for vitrified parking tiles of size 300 x 300 x 10 to 12 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L for chequrred cement concrete tiles of size 300 x 300 x 22 to 25mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

Material and labour for 75/110 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

M & L for Sand filling under floors or in foundations or in trenches including watering and consolidation complete all as specified and directed.

S&F MS framed works such as grills grating etc with ends of bars shouldered and for riveted in forged into spikes, framed guard bars, railing and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed

S& F of Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Complete all as specified and as directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, completeall as specified

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangement etc, complete all as specified

S&F 30 mm thick 2nd class hard wood factory made flush shutter solid core construction with block board core and plywood face panels commercial type of both side, complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter open rebated and prepared to receive glass, gauze etc edges of the framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc sizes of members as specified in SSR Pt I clauses 8.24 (a) Complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S& F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares, complete all as specified and as directed.

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

Supplied and fixed Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

Supplied and fixed Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

Demolition of cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and as directed.

M&L Reinforced cement concrete M 25 Design Mix (20 mm aggregate) including rafts footings, foundation beams, plinth beam base for column etc basement slab, under reamed piles and mass concrete all as specified.

M&L Reinforced cement concrete M 25 Design Mix (20 mm graded aggregate) as in coloumn, pillar, pier, posts etc Complete all as specified and as directed.

M&L Reinforced cement concrete M 25 Design Mix (20mm graded aggregate) in slab supported on walls, beams, and columns, in floors, roof, landings, balconies, canopies, deck slab and in shelves and the like Complete all as specified and as directed.

M & L for RCC M 25 Beams, roof beam cantilevers, lintels, slabs, balconies, canopies, deck slabs, bend etc. or in similar articles up to 5th floor level all as specified and directed

M&L for RCC M-25 (Design Mix) as in chajjas complete all as specified and directed.

Use & waste form work for flat fair finished surfaces of concrete foundation, footings, bases of columns and plinth beam and similar work, complete all as specified and as directed.

Use & waste form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, complete all as specified and as directed.

Use & waste Formwork to soffits of suspended slabs such as slab and similar work; not exceeding 200mm thick (Horizontal or sloping) all as directed.

Use & waste Formwork to sides and soffits of floor or roof beams, beam launchings, girders, bressummers, lintels, all as directed

Use & waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide all as directed

Use & waste Formwork to , chajjas, troughs and similar items including edges, complete all as specified and as directed.

M&L TMT bars 10 mm dia and over cut to length, bent to shape required including cranking bending for columns, hooking ends and binding with mild steel wire Complete all as specified and as directed.

M&L TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed.

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strength not less than 75 kg/Sq cm all as specified and directed.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strength not less than 75 kg/Sq cm all as specified and directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

M&L for 15 mm thick rendering CM (1:4) finished even and smooth (without using extra cement) with using WPC as per manufacturing instruction on second layer.(Note :- WPC will be measured and paid separately)

M & L Rendering 15mm thick on surface of brick work/concrete surface in CM 1:6 and is to be finished even and fair without using extra cement complete all as specified and as directed.

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and fair without using extra cement , complete all as specified and as directed.

M&L Rendering 5 mm thick in patches with CM (1:3) on ceiling Complete all as specified and directed.

Supply only integral Water proofing compound of make ISI all as specified and directed.

M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall, completeall as specified and as directed.

M&L three coats of white wash including preparation of new plaster surfaces as in ceiling complete all as specified and directed.

M&L for Newly plastered surfaces of external wall and applying two coats of apex /weather coat paints over one coats of approved Paints damp shield or equivalent over a coat of primer etc complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying one coats of weather coat (Apex of Asian or equivalent in dulux, Berger) over a 1mm thick layer of putty and one primer coats of damp shealth to new plastered walls as per manufacturer and applied by approved applicator complete all as specified and directed.

M&L preparation of old surfaces of ceiling and applying one coats of white wash all as specified and directed..

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L Applying two coats of Oil bound distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly plastered wall all as specified and directed.

M&L Applying two coats of Oil bound distemper to old surface wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specified and directed..

M&L preparation of old surfaces of wall and applying one coats of Oil bound distemper to old surface wall including making good to existing wall, like undulation or cracks all as specified and directed..

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Neonatal or similar pattern roof coverings, all as specified and as directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws All as specified and as directed by Engineer-in-charge.

S & F 0.63 mm Plain, galvanized, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 27 for crumple joints as directed

M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm Complete all as specified and as directed.

Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyester fabric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capacity on same place with all required necessary fittings complete all as specified and as directed.

Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 140 mm complete all as specified and directed

M&L in repairs Prelaminated particle board 18/19 thk, interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed.

S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed.

S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed.

Material and labour for concealed point wiring for one light point with 1.5 sqmm cable PVC insulated and unsheathed copper conductor multi stranded 1100 volts,ISI marking drawn though concealed non metallic PVC rigid conduit of suitable size with all accessories medium grade ISI marking, concealed with and including modular metal flush box and modular white cover plate frame for fixing switches, socket including 1.5 Sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity conn ected to common earth dolly complete with chasing cutting to surface of wall, re-plastering and colour washing, putty as per existing to match colour of wall.

All as per Item No 136 here-in-before but for one fan/exhaust fan point

All as per Item No 136 here-in-before but for one 3 pin 5 amps socket outlet on the same board

All as per Item No 136 here-in-before but for one 3 pin 5 amps socket outlet on the independent board

All as per Item No 136 here-in-before but for one bell point controlled by one 5 amps switch

All as per Item No 136 here-in-before but with 2x2.5 sqmm plus 1x2.5 sqmm copper conductor for One 3 pin socket outlet, 15 amps, independent board.

All as per Item No 136 here-in-before but wiring with 4.0 sqmm including 2.5 sqmm PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected common earth dolly for one 3/5 pin 15 Amps socket out let on independent board

Supply and fix switch piano, 5 amps switch flush type one way single pole.

Supply and fix ceiling rose surface bakelite 65x50 mm having 3 terminal, complete all as specified and directed.

S&F PVC angular holder polycarbonate as specified and directed.

S&F switch socket combination 2 in ,5 amps flush type.

S&F Modular switch flush type,6 amps 1 way, 1 module

S&F Modular switch flush type,16 amps 1 way, 1 module

S&F Modular socket outlet,3 pin,6 amps one way, 2 module

S&F Modular socket outlet,3 pin,16 amps one way, 2 module

S&F Modular bell push flush type,5 amps, 1 module

S&F Modular fan regulator stepped type, 2 module,120W

Supply and Fixing of wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEBS20WLED865SPCWH or equivalent in Philips/Havells/C&S/Orient all as directed by EIC.

Supply and Fixing of wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10W/9W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per requirement, complete all as specified and as directed. Make : Philips/Havells/C&S/Surya

Supply and fix new generation energy saving and environmental friendly long life LED street light 48W made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 Cat No ENDURAPEARLNEOSL48WLED757PASYTOPC 9405 Make : Havells or equivalent in Philips/C&S/Surya/HP

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver Make Havells/Bajaj/Crompton/Orient

S&F Ceiling fan of sweep not less than 1200 mm 5 star with hanger including taking town old unserviceable fan and taking to MES store. Make Havells/Bajaj/Crompton/Orient

S&F single phase electric geyser 25 Litres capacity,5 star including MS clamp for fixing on wall including cold and hot water pipes with suitable angle iron for mounting. Make Havells/Bajaj/Crompton/Orient

S&F Sheet metal enclosure (DB ) single door, Single Pole and neutral 8 way,IP 43 protection 240 Volt with 200 Amps rated bus bar complete all as directed by Engineer-in-Charge.

S&F Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one single pole MCB of 20 amps, completeall as directed by Engineer-in-Charge.

S&F MCB SPN 63 Amp, 'C' Series, 10KA braking capacity 230/240 volt AC as specified and directed. Make: Havells/Legrand/L&T/Standard

S&F MCB SP 6 to 32 Amps 240 volts having 'B' series complete Make: Havells/Legrand/L&T/Standard

S&F MCB DP 6 to 32 Amps 240 volts having 'B' series complete Make: Havells/Legrand/L&T/Standard

Supply and fix in replacement of of gun metal gate valve of dia 25mm with iron wheel all as specified and directed for the following sizes Make: TATA / JINDAL

Supply and fix in replacement of brass ball valve ISI Mark high pressure with polythene float and fly nut of dia 20mm with necessary connection, complete all as specified and directed.

M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15mm complete all as specified.

S&F in replacement of 500 ltr capacity three layer rotational moulded polythene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I including dismantling of old tanks, complete all as specified and directed.

S&F in replacement of 1000 ltrs capacity three layer rotational moulded polythene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I including dismantling of old tanks, complete all as specified and directed.

Supply, laying, testing and commissioning XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 2 core 4 sq. mm, complete all as specified and directed.

Supply, laying in ground / fixing on surface of wall / drown through GI pipe etc connecting trembling and testing of LT under ground cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 sq mm 2 core cable completed all as specified and directed.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

Supply and fixing Test point terminal block made of gun metal or phosphorus bronze size 75 x75 x25 mm drilled and screwed including 3 Nos ,8 mm dia 25 mm long hexagonal head screw complete all as specified and directed.

M&L for maintenance free chemical earthling with environment friendly earthling system consisting of 40 mm dia M S earth electrode with electrolytic grade copper coating of 3 mtr length, to be lowered in 150mm dia bore including filling back by earth enhancing compound (10 kg x 3 bag) minimum and the top of the bore shall be finished with FRP pit cover of suitable size. Earth resistance should be less than 1 ohm.Note :- 1. Earth work , earthling chamber with cover of FRP and testing of earthling will be deemed to be included in quoted rate.

Supply and fixing copper strip 25 x 4 mm with saddles and fixing screws etc for wall/roof conductors above ground level all as specified and directed.

Supply and lying in trenches/fix to wall GI pipe of dia 20mm medium grade with required clamping arrangements to fix with the pole complete and connecting to the existing pipe line all as specified Make : JINDAL/TATA

Supply and fix in replacement of of GI pipe of dia 25mm to wall/Pole of medium grade with required clamping arrangements to fix with the pole complete and connecting to the existing pipe line all as specified Make : JINDAL/TATA

M&L for GI pipe for drawn through to strip light grade dia of bore 40 mm laid in trench/ fixing with surface of wall with all fittings complete all as specified and directed.

Artificial Treatment by good Agriculture Soil Supply and laying of good agriculture soil to reduce the resistivity, complete all as specified and directed.

Excavation around the copper/ GI electrode and removing existing dry soil of 1mtr x 1mtr x 12 feet and replacing with good agriculture fiield soil or cotton soil for the improvement of earth resistance, complete all as specified and directed.

S&F 3 core 1.5 sqmm multistranded PVC insulated flexible copper cable FRLS grade including required PVC Conduit to protect the cable, complete all as specified and directed.

S&F 25W LED outdoor new generation post-top energy saving, environmental friendly long life aesthetical designed with symmetrical light distribution, spun aluminium landscape luminaries with high power LEDs as light source with IP 65 protection complete including all its accessories, complete all as specified and directed.

S&F PVC loop in loop out box 139x119x70 mm made of impact assistance plastic and heat resistance material and all cable fixed with appropriate connector including necessary PCC foundation for landscape light, complete all as specified and directed.

Material & Labour for sub main wiring (concealed) with two run of 6 sqmm PVC unsheathed unsheathed, stranded copper conductor cable (1100 volts grade) and one run of copper earth wire 6 sqmm drawn through PVC conduit and all accessories including making good the disturbed surface by putty and matching the colour of wall with existing colour. Note : 2 runs of line conductor, one run of earth continuity conductor and one run of PVC conduit/PVC casing capping shall be measured as unit length, complete all as specified and directed.

All as per Item No 184 above but 2x4 sqmm plus 1x4 sqmm earth wire

shyam constructions

D G Corporation

Chinmay Traders