Loading
Loading…
Loading…
Tender Value
₹2.5 Cr
EMD Value
₹5.0 L
Closing Date
5 Jun 2026, 12:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
MGS
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar work:Any work involving outdoor or Indoor signalling work. Signalling Work - All works which are directly related to the interlocking of the Core Signaling System. OR Any MACLS work involving outdoor & indoor work or alteration in existing Indoor/outdoor signaling system OR Any work involving outdoor/indoor signalling works including MACLS/ EI/ PI/RRI/IBS/IBH/LC Gate/ DAC / ELD and ELD for Signalling Cable, Quad Cable, Fuse Auto Change Over System etc.
99 conditions · 13 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Verification of Tender's credentials:- The tenderers shall submit a copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested / digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
Following documents shall be submitted by the tenderer in case of Sole Proprietorship Firm: Sole Proprietorship Firm: (i) An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii) All other documents in terms of explanatory notes in clause 10 of GCC 2022.
Following documents shall be submitted by the tenderer in case of HUF: A copy of notarized affidavit on Stamp Paper declaring that his Concern is a proprietary Concern and he is sole proprietor of the Concern OR he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii) All other documents in terms of explanatory notes in clause 10 of GCC 2022.
Following documents shall be submitted by the tenderer in case of Partnership Firm: The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. (i) A notarized copy of partnership deed. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. Note :- One or more of the partners of the firm or any other person (s) shall be designated as the authorized person (s) on behalf of the firm, who will be authorized by all the partners to act on behalf of the firm through a "Power of Attorney", specially authorizing him / them to submit & sign the tender, sign the agreement, receive payment, witness measurements, sign measurement books, make correspondences, compromise / settle / relinquish any claim (s) preferred by the firm, sign "No Claim Certificate", refer all or any dispute to arbitration and to take similar such action in respect of the "said tender" / contract. Such "Power of Attorney" shall be notarized / registered and submitted along with the tender.
Following documents shall be submitted by the tenderer in case of Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v) All other documents in terms of explanatory notes in clause 10 of GCC 2022
Following documents shall be submitted by the tenderer in case of LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: A copy of LLP Agreement. (i)A copy of Certificate of Incorporation (ii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iii)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (iv)All other documents in terms of Para 10 of the Tender Form (Second Sheet). (v) All other documents in terms of explanatory notes in clause 10 of GCC 2022.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of upto five years.
In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD), Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto five years.
Non-compliance with any of the conditions set forth therein above is liable to result in the tender being rejected.
Certificates and testimonials regarding contracting experience for the type of job for which tender is invited with list of works carried out in the past.
Certificates which may be an attested Certificate from the client, Audited Balance Sheet duly certified by the Chartered Accountant etc regarding contractual payments received in the past.
The list of personnel / organization on hand and proposed to be engaged for the tendered work. Similarly list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
In case of more than one L-1 bidders, tender may be awarded to tenderer having higher Bid Capacity. In case Bid Capacity is also the same tenderer having done more value of similar work in last three previous financial years and the current financial year upto the date of opening of the tender, may be selected for the award instructions with respect to Bid Capacity will follow.
GCC -2022 with latest amendments and instructions is an integral part of the contract document. All terms and conditions mentioned therein to be followed.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
In addition to GCC 2022 and Indian Railway Unfiled standard specification works materials volume I II 2010, revised up to date, special condition attached shall also apply.
Taxes as per GST (1st july2017), Income tax, TDS, Sales tax/Business tax, Royalty etc Royalty etc. will be recovered as per extant instruction on the subject.
Certificates from private individuals for whom such works are executed being executed is not acceptable.
Eligibility criteria for works tender in respect of partnership firms to be dealt as per GCC -2022.
In case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
Any Conditional offer will be summarily rejected.
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered. Certificates from private individuals for whom such works are executed being executed is not acceptable.
BOOKS OF REFERENCE: These tender documents are to be read with the followings books with versions updated/corrected/modified up to the date of tender opening: 1) Standard General Conditions of Contract 2022 as amended by updated correction slips termed GCC 2022. 2) Eastern Railway L&M Sch 87 as amended by updated correction slips. 3) E. C. Railway Engineering department unified standard schedule or rates 2012 as amended by updated correction slips (termed USSOR, 2012) up to the date of tender dropping. 4) Standard specifications contained in Indian Railways Hand Book Specifications (works and materials)2010. These four books are where-in-after called the "Books of reference" and shall govern this tender as well as the contract resulting from the acceptance from this tender, to the extent that these contents do not conflict with the contains of the various chapters of these documents.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Railway administration will not be responsible for any delay/difficulties/inaccessibility of the downloading facility for any reason whatsoever. In case of any discrepancy between the tender document downloaded from the internet and the master copy available in the office mentioned above, later shall prevail and will be binding on the tenderer. No claim on this account will be entertained.
If working through contract Labour, the contractor must register with Labour Commissioner necessary license to be submitted with tender or to be produced before signing of contract agreement.
The contractor will be permitted to make use of the service roads already existing within the Railway possession. If additional service roads are required within Railway premises the contractor may be allowed to make them at his own costwith the prior approval of the Railway's Engineer. All service roads required outside Railway boundary shall be constructed by the contractor at his own risk and cost. These roads shall be maintained by the contractor at his own cost. The Railway reserves the right to make use of these service roads as and when necessary without any payment to the contractor.
The Tenderer/Contractor may be required to engage surplus/retrenched casual labors of the Railway, if found suitable up to the extent as deemed fit by the Railway during the currency of the contract. The terms of employment between such labor and the Tenderer/Contractor may be on mutually agreed terms subject to the statutory provisions contained in the Labor Regulations and enactments. The Contractor shall indentify the Railway against any claim arising out of employment of such labour and the Railway shall not be party to any disputes etc. arising out of the employment of such labour by the Tenderer/Contractor.
The intending tenderer should study with General Conditions of Contract, Special Conditions of Contract, and Instructions to Tenderer, Technical Specification, Drawings, Documents, Schedules etc. enclosed and also the General Conditions of Contract, 2022 of the Engg. Department with up to date modifications and IRS Conditions of Contract for the Stores department with up to date modifications all herein after collectively referred to as Tender Specification.
Provision in the instructions, General Conditions of Contract and Special Conditions of the Contract in the tender documents will override any overlapping provisions of General Conditions of contract 2022 of the Engg with up to date modifications and IRS Conditions of Contract for the Stores department with up to date modifications. When there is conflict between General Conditions of contract 2022 and special conditions of the contract, the special conditions shall prevail.
Other Local Taxes levied either by Governmental agency or by Municipal agency shall not be paid by the Railway. These are deemed to be included in the F.O.R. price, unless specifically brought out in the offer.
SCHEDULE COVERING DELIVERY OF MATERIALS AND THE EXECUTION OF THE WORK AT SITE: The tenderer shall attach to his offer a time schedule showing the guaranteed time (i) schedule for the supply of materials, the progress and completion of the works at site. (ii) The time Schedule shall be as referred to in Para - 4 of Instruction to tenderer. (iii) The tenderer should offer the time schedule for supply of materials, the duration of erection and completion period for the work and it should be kept the barest minimum. This aspect will be particularly taken into account while examining the offer. In any case this period shall not be more than the time specified in the tender documents, reckoning from the of date of issue of Letter of Acceptance.
GENERAL REQUIREMENT :(a)All documents to be submitted in connection with this tender will be written in English. (b) Dimensions, weights etc. shall be in Metric System/British Standard Equivalents. The technical terms and symbols to be used will be as per General and Subsidiary Rules/Signal Engineering Manual/Extant Practice of East Central Railway.
ADVICE OF CANCELLATION OF DOCUMENTS BY TENDERER :The Cancellation of any document such as Power of Attorney/Partnership deed etc. should be forthwith communicated by the contractor to the Rly. Administration in writing failing which the Rly. Administration shall have no responsibility or liability for an action taken on the strength of the said document.
Any individuals signing the tender or other documents Connected there with should specify whether he is signing :(a)As sole proprietor of the concern or his attorney. (b)As partner or Partners of the Firm. (c) For the Firm per procure, or as a Director, Manager or Secretary in the case of a Limited Company.
THE RAILWAY NOT BOUND TO ACCEPT ANY TENDER: The Railway shall not be bound to accept the Lowest or any Tender or to assign any reason for non-acceptance or rejection of a Tender. No Tender shall be deemed to have been accepted unless such acceptance shall have been notified in writing to the successful tenderer by the Railway. The Railway reserves the right to accept any tender in respect of the whole or any portion of the work specified in the tender or to divide or reduce the work or to accept any tender for less than the tendered quantity without assigning any reason whatsoever.
The General Instructions and Special Instructions mentioned in various para to be read in conjunction with uploaded tender document which contains important formats/Annexures and Technical bindings and schedule of work etc.
Letter of credit as mode of payment in works tenders or service tenders is available. If is an option for the contractor to take payment from Railways through a letter of credit (LC) arrangement. The details letter of credit is as under:-
Option for Letter of Credit (V) In case tender opts for payment through LC, following shall be the procedure to deal release of payment through LC: (a) The LC shall be a sight LC. (b) The contractor shall select his Advising/Negotiating bank for LC. The incidental cost forward issue of LC and its operation thereof shall be borne by the contractor.(c) SBI, New Delhi ,Main Branch will be the nodal branch for issue of LCs based on online requests received from Railway Accounts Units fortenders opened in financial year 2018-19. SBI branches where the respective Railway Accounts Office has its Account (local SBI branch) will be the issuance/reimbursing branch for LC issued under this arrangement. The Bank shall remain same for this tender till completion of contract. The incidental cost @ 0.15% per annum of LC value, towards issue of LC and operation thereof shall be borne by the contractor and shall be recovered from his bills. (d) The LC shall be opened initially for duration of 180 to 365 days in consultation with contractor. The LC shall be extended time to time as per progress of the contract, on the request of the contractor. The value of LC to be opened initially as well as extended thereafter shall be finalized by the engineer in consultation with the contractor on the basis of expected progress of work. (e) The LC terms and conditions shall inter-alia indemnify and save harmless the Railway from and against all losses, claims and demands of every nature and description brought or recovered against the Railways by reason of any act or omission of the contractor, his agents or employees, in relation to the Letter of Credit(LC). As sums payable/borne by Railways on this account shall be considered as reasonable compensation and paid by contractor. (f) The LC terms and conditions shall inter-aliaprovided that Railways will issue a Document of Authorization (format enclosed as Annexure 2) after passing the bill for completed work, to enable contractor to claim the authorized amount from their bank. (g) The acceptable, agreed upon document for payments to be released under the LC shall bethe Document of Authorization.
Option for Letter of Credit (VI) In case tender opts for payment through LC, following shall be the procedure to deal release of payment through LC: (h) The Document of Authorization shall be issued by Railway Accounts Office against each bill passerby Railways. (i) On issuance of Document of Authorization, acopy of Document of Authorization shall be posted on IREPSfor download by the contractor. A digitally signed copy of Document of Authorization shall also be sent by Railway Account Officer to Railway's bank (Local SBI Branch). (j) The contractor shall take print out of the Document of Authorization available on IREPS and present his claim to his bank (advisingBank) for necessary payments as per LC terms and conditions. The claim shall comprise of copy of Document of Authorization, Bill of Exchange and Bill. (k) The payment against LC shall be subject to verification from Railway's Bank(Local SBI Branch). (l) The contractor's bank (advising bank) shall submit the documents to the Railway's Bank (Local SBIBranch). (m) The railway's bank (issuing bank) shall, after verifying the claim so received w.r.t the digitally signedDocument of Authorization received from Railway Accounts Office, release the payment to contractor's bank (advisingbank) for crediting the same to contractor's account. (n) Anynumber of bills can be dealt within on LC, provided the sumtotal of payments to contractor is within the amount for which LC has been opened. (o) The LC shall be closed after the release of final payment including PVC amount, if any, to the contractor. (p) The release of performance guarantee orsecurity deposit shall be dealt directly by railway with the contractor i.e., not through LC.
For the service rendered by the RITES for inspection of materials supplied by the contractor in works contract, inspection charges @ 1% of the cost of materials including all taxes, excise duty etc. are to be borne by the contractor& no inspection charges are payable to RDSO by contractor for RDSO Inspected materials.
Provision of latest labour laws must be followed as per applicable.
Provision of Interlocking of LC Gate No. 71/E, 60/E, 54/E, 30/E, 67/E, 64/E in ARA- SSM Section in DDU division.
SG-DSE-OT-11-26
SG-DSE-OT-11-26
Open
Works - General
12 Months
Chandauli, Uttar Pradesh
₹0
₹5.0 L
5 Jun 2026
14 May 2026
22 May 2026
199 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,49,35,930.54 | ||
| — | 6.00 | — | — | ||
| Supply of Electrically operated Lifting Barrier assembly 110V AC including all the accessories as per RDSO Specification No. RDSO/ SPN/208/2012 (Ver2.0) with latest amendment. Inspection: RDSO. | — | — | — | 24,73,787.82 | |
| — | 6.00 | — | — | ||
| Installation of Electrically operated lifting barrier assembly | — | — | — | 2,37,301.56 | |
| — | 12.00 | — | — | ||
| Supply of spare powder coated G.I. Booms 32 feet long in 4 sections of 8 feet as per RDSO Specification with latest amendment. Shape of boom (Octagonal or rectogonal etc) to be clarified by Railway before supply. Inspection: Consignee. | — | — | — | 2,43,038.16 | |
| — | 12.00 | — | — | ||
| Casting concretting and curing of foundation for power operated Level X-ing pedastal as diected by site Engineer. | — | — | — | 1,02,716.4 | |
| — | 12.00 | — | — | ||
| Casting, concreting and curing of foundation of boom resting stand foundation. | — | — | — | 10,718.64 | |
| — | 6.00 | — | — | ||
| Supply & Installation of hooter 12V with accessoried make Ahuja or letest for L.C. Gate. Inspection-Consignee. | — | — | — | 27,353.58 | |
| — | 6.00 | — | — | ||
| Supply & Installation of LC gate control cum indication panel up to 5 line as per railway's approved diagrams, Sepc. No.IRS-S- 36/87 with latest mmendement. Note: PBT terminals to be inspected by RDSO. Inspection : Consignee | — | — | — | 7,33,200 | |
| — | 6.00 | — | — | ||
| Supply of Sliding Barrier Boom with "E' Type Lock complete set with all required accessories. Insp. Consignee. | — | — | — | 13,20,432 | |
| — | 6.00 | — | — | ||
| Casting of CC foundation 18X18X24 inch ratio 1:3:6 of cement, coarse & sand 10 Nos. of foundation per gate also fixing of foundation bolt with provision of sliding booms as per instructions of Railway representative at site. All materials including Nut & bolts for foundation to be supplied by contractor as per site requirement. | — | — | — | 2,47,873.74 | |
| — | 6.00 | — | — | ||
| Installation and commisssioning of Sliding boom gate. This includes levelling, fixing of sliding boom with fixing of E type lock etc. . Note: All by material except sliding boom gate to be supplied the contractor. NOTE:- Unit Job stand for Per Gate. | — | — | — | 21,220.14 | |
| — | 78.00 | — | — | ||
| Unwinding of cable using jack & tindle, pullys for laying of signal Cable in normal cable trench & pipe without any physical damage & twist upto & inside the location box/cabin. | — | — | — | 6,51,513.72 | |
| — | 10000.00 | — | — | ||
| Digging of trench 1.0 mtr. deep and 0.3 mtr. Wide in all kind of soil duly clearing of roots and plants, bushes etc. in the path of laying of cable as per RE specification. The trench should be straight and parallel to track. If the depth of trench is not uniform in a span of 100 mtr of shorter lengths and site condition demands along the cable run, minmum depth will be taken for that particular stretch for payment. Meggering of cable before and after its laying of all types of out door cables to be done. | — | — | — | 4,64,800 | |
| — | 10000.00 | — | — | ||
| Back filling of trench by shifted earth and ramming of the earth up to original ground level after the work | — | — | — | 41,400 | |
| — | 300.00 | — | — | ||
| Supply of split DWC pipe with the socket/coupler and T-Joint whereever required, Size of outer dia 200 mm/inner dia 175mm. Inspection-Consignee. | — | — | — | 2,05,443 | |
| — | 300.00 | — | — | ||
| Installation of split DWC pipe | — | — | — | 20,364 | |
| — | 3000.00 | — | — | ||
| Transportation of HDT machine with accessories including handling of stores materials, preparation of site and boring of 110mm dia and placing HDPE pipe of size 63/40mm in single / double / triple etc required for crossing/ laying of Railway cables in a combination of quad & signalling cables etc. as per required comprising maximum 72 cores in any HDD section on land /bridges / culverts / track / pucca road crossing and blowing / pulling of Quad / Signalling cables etc. within HDPE pipe. Boring of trench shall be (one) Mtr below the track to 1.5 (one point five) minimum 3 (three) meter below the river bed, 01 meter below other lands including road / pucca road 63/40 mm dia & its accessories suitable for HDT as permanently lubricated HDPE pipe of size 63/40 crossing area. This includes supply as per Specification No. RDSO/SPN/TC/45/2013 or latest amendment & cost of the fuel and all other items which will be required for laying of cable through it. Inspection : RITES for HDPE pipe (for inspection charges cost of all sort of HDPE pipe is Rs. 195/- per Mtr.) NOTE: The number of HDPE pipes (of any dia as mentioned above) to be pulled in any HDD section will depend upon the numbers of quad / signalling cables to be pulled through that HDD section as per site requirement. At a particular site, the second /additional HDD is to be done only after completing the pulling of 72 cores of cable through 1st HDD other wise the second /additional HDD will not be counted as a new / additional HDD for the purpose of billing. | — | — | — | 36,48,660 | |
| — | 300.00 | — | — | ||
| Horizontal boring/ manual moling without damage to surface road/ track for laying/insertion of DWC/GI/HDPE pipe. The bore shall be done at the depth of minimum 1400 mm from the ground level. The ground level shall be onsidered ignoring bank height of the bank of road. Contractor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damaged due to rough handling or pressure on cable. Payment of boring shall be made only after DWC/GI/HDPE pipe is laid in the bore. Inspection of pipe Consignee. | — | — | — | 3,60,000 | |
| — | 300.00 | — | — | ||
| Supply of DWC pipe for track crossing (Size of outer dia 200mm. Inner dia 175mm) Inspection- Consignee. | — | — | — | 2,65,002 | |
| — | 300.00 | — | — | ||
| Execution of DWC Pipe for track crossing (size of outer dia 200mm. Inner dia 175mm.) | — | — | — | 23,736 | |
| — | 6.00 | — | — | ||
| Supply of CT rack (DRG. N0. S&T/C-19/2001/ER) complete with all fittings including connect/disconnect terminal block as per Spec. No. RDSO/SPN/189/2004 or latest. Note: Connect/Disconnect terminals to be inspected by Consignee. | — | — | — | 3,46,678.86 | |
| — | 6.00 | — | — | ||
| Installation of cable termination Rack with scaffolding materials, ladder for supporting outdoor cable; wire guide; complete with other necessary hardwares as per requirements of Rly. & erection materials .(Rate & Staion Wise Qty. to be specified by the tendererer.) Upto 4 to 5 Line Station | — | — | — | 34,667.88 | |
| — | 6.00 | — | — | ||
| Supply of relay racks to accommodate 100 relays complete with all fitting as per ER.DRG.No. S&T/C-20/2001. Insp. : Consignee | — | — | — | 2,73,188.04 | |
| — | 6.00 | — | — | ||
| """Installation and wiring of relay rack as per CSTE/ER'S DRG. NO. S&T/7/90 and as per IRS: S-36/87 fixing transformers and supply and installtion of fuses, Diodes resistances; condensors; terminal strips/ tagblocks' bisbar & other equipments required for the approved system design complete with scaffolding materials & required hardwire & errection materials (Station wise quantity to be specified by tenderer up to 5 Line Station. Note: 16/0.2 MM PVC wire to be supplied by contractor. ire to be procured from the RDSO approved firms and inspected by RDSO.. Note: All materials escept sliding boom gate to be supplied by the contractor. """ | — | — | — | 1,33,735.68 | |
| — | 100.00 | — | — | ||
| "Supply of Indicating type low voltage nondetoriating fuse link as per Spec. No. IRS- 5:80/92 with latest amendment. Inspection-RDSO. i) Fuse Capacity 0.6 Amp" | — | — | — | 4,883 | |
| — | 100.00 | — | — | ||
| Supply of Indicating type low voltage nondetoriating fuse link as per Spec. No. IRSS:80/92 with latest amendment. iv) Fuse Base Capacity 0.6 Amp. Inspection:RDSO. | — | — | — | 6,127 | |
| — | 120.00 | — | — | ||
| Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92 or latest. Round head type. 2 Amp. Capacity. Inspection-RDSO. | — | — | — | 9,444 | |
| — | 150.00 | — | — | ||
| Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92 or latest. Round head type. 6 Amp. Capacity. Inspection-RDSO. | — | — | — | 12,549 | |
| — | 60.00 | — | — | ||
| Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92 or latest. Round head type. 16 Amp. Capacity. Inspection-RDSO. | — | — | — | 6,517.8 | |
| — | 330.00 | — | — | ||
| Supply of PBT fuse block with inserts cartridge type, to be mounted inside the location Box/Relay Rack. i) Fuse Base (DRG No. SA - 23748, IRS: S-75/91) or latest. Inspection RDSO. | — | — | — | 85,922.1 | |
| — | 54.00 | — | — | ||
| Supply of PVC wire coil 16/ 0.2mm of size of colors as per instruction of site enginer in 100 mtr. Coil Specn. No. IRS-S-76/89 with latest amendement material to be procured from RDSO approved firm only with performance guarantee. . Insp RDSO. | — | — | — | 60,526.98 | |
| — | 12.00 | — | — | ||
| Supply of PVC Coil 3/ 0.75mm of size of colors as per instruction of site enginer in 100 mtr. Coil Specn. No. IRS-S-76/89 material to be procured from RDSO approved firm only with performance guarantee. Insp RDSO. | — | — | — | 28,651.68 | |
| — | 12.00 | — | — | ||
| Supply of PVC Coil 7/ 0.75mm of size of colors as per instruction of site enginer in 100 mtr. Coil Specn. No. IRS-S-76/89 material to be procured from RDSO approved firm only with performance guarantee. Insp RDSO. | — | — | — | 54,000.84 | |
| — | 36.00 | — | — | ||
| Supply of CLS Post 4.5 mtr. and Ladder 4.5 Mtr. With bases as per RDSO DRG. No.SA.23153 ADV (Alt.1) as per S-2011/M and RDSO Spec. No. S6-81 or latest. Inspection Consignee | — | — | — | 7,77,216.24 | |
| — | 28.00 | — | — | ||
| "Supply of CLS unit (LED unit). This includes supply of Non Metalic (FRP) Color light signal housing multi unit type for Railway signalling suitable for RE area, 2aspect complete without lenses,lamps and signal transformer as per RDSO Drg. No. SA-23002/A/ M/ ADV, ALT-8 and as per Spec No. RDSO/SPN/194/2006 (version 1.0) or latest and FRP material as per RDSO Spec No. RDSO/SPN/151/1997 or latest. Inspection: Consignee." | — | — | — | 7,73,282.16 | |
| — | 28.00 | — | — | ||
| Installation, erection and wiring of CLS including laying out of tail cable from location box and earthing of CLS as per technical specn. In the tender. i) 2 Aspect CLS | — | — | — | 50,576.4 | |
| — | 7.00 | — | — | ||
| "Supply of non-metallic (FRP) colour light signal housing multi-unit type for Rly. signalling, suitable for RE area, 3 aspect complete without lenses, lamps and signal transformer as per drg. no. SA23002/A/M /ADV. ALT-8 and per spec. no. RDSO/SPN/194/2006 (VER- 1.0) or latest and FRP material as RDSO spec.no. RDSO/SPN/151/1997 or latest. Inspction: Consignee." | — | — | — | 2,70,909.8 | |
| — | 7.00 | — | — | ||
| Installation, erection and wiring of CLS including laying out of tail cable from location box and earthing of CLS as per technical specn. In the tender. i) 3 Aspect CLS | — | — | — | 18,055.03 | |
| — | 4.00 | — | — | ||
| Supply of Non Metalic (FRP) Color light signal housing multi unit type for Railway signalling suitable for RE area, 4 aspect complete (without lenses, lamps and signal transformer) as per RDSO Drg. No. SA-3002/A/M/ADV,ALT-8 and as per Spec No. RDSO/SPN/194 /2006 (version 1.0) with latest amdt and FRP material as per RDSO Spec No. RDSO/SPN/151/1997 or latest. Inspection: Consignee. | — | — | — | 1,87,685.2 | |
| — | 4.00 | — | — | ||
| Installation, erection and wiring of CLS including laying out of tail cable from location box and earthing of CLS as per technical specn. In the tender. i) 4 Aspect CLS | — | — | — | 13,312.64 | |
| — | 36.00 | — | — | ||
| Casting, concreting & curing of foundation for Main signal including cost of all material required for casting and concreting and provision of holding down bolts and nuts. This includes curing of foundation by water for min. 3 days. | — | — | — | 3,18,944.52 | |
| — | 60.00 | — | — | ||
| Suppply of Earth electrode. Material to be procured from reputed firm only. Drg. No. S&T/C-41 NKG or latest. Inspection : Consignee. | — | — | — | 1,08,638.4 | |
| — | 60.00 | — | — | ||
| Fixing of earth electrode including earth wire as per Drg. No. SK/1/ 95 (NKG) for apparatus cases, Signal post and other equipment asper instructrion of site engineer all materials except earth Electrode shall be supplied by contractor required for execution of the work. | — | — | — | 32,726.4 | |
| — | 60.00 | — | — | ||
| "Supply and laying of earth lead wire and soldering of lead wire to earth electrode and apparatus case / signal post as per instruction on earthing and providing cement enclosure for earth electrode as per DRG. No. S&T / C -41 (NKG). This includes supply of all materials by the contractor. Inspection :Consignee" | — | — | — | 72,748.2 | |
| — | 1500.00 | — | — | ||
| Modular disconnecting type terminal block (2 way) with intermediate plate to suite RDSO Spec. RDSO/SPN/189/2004 (Wago or Phonixe or better). Inspection consignee. | — | — | — | 78,900 | |
| — | 60.00 | — | — | ||
| Supply of screwless end stop;10mm / 0.394 in wide carrier rail din 35, grey similar to Wago part No. 249-117. Inspection-Consignee. | — | — | — | 949.8 | |
| — | 60.00 | — | — | ||
| Supply of steel carrier rail ;35 x 7.5mm, 1mm/0.039 in thick, unslotted similar to Wago part No. 210-229/PW11-0000. Inspection-Consignee. | — | — | — | 11,142.6 | |
| — | 1500.00 | — | — | ||
| Fixing Installation of disconnect terminal (Wago or similar) on relay rack / CTR / location with steel carrier rail. | — | — | — | 2,040 | |
| — | 30.00 | — | — | ||
| Supply of full size location box as per Design of GKP Signal Workshop alongwith E. type locks ward no. of locks to be informed by railway before supply. Inspection. Consignee. | — | — | — | 6,40,987.5 | |
| — | 60.00 | — | — | ||
| Supply of E-type lock without key, spec. no. IRS-S-30, Drg. No.S-3376/M key -S- 3377/M'or latest. Individual number of miniature E type locks and Normal size of locks required at site to be decided by the site engineer as per site requirement. Ward nos. of lock to be advised by Railway before supply. Inspection Consignee. | — | — | — | 78,897.6 | |
| — | 6.00 | — | — | ||
| Supply of Key for E-type lock. Key for E type lock supplied above. Inspection Consignee. | — | — | — | 1,207.86 | |
| — | 12.00 | — | — | ||
| Supply of Bakelite Strip/Sheet of Size (950 x 75 x 12) mm. For fixing 30Nos. ARA terminals/Fuse base terminals/Fuse base. Inspection : Consignee. | — | — | — | 6,227.76 | |
| — | 30.00 | — | — | ||
| "Casting, Concreting and Curing of foundation and erection for full apparatus case(GKP- type) as per DRG No. SGW/MGS/L1/91 including cost of all materials required for fixing holding downbolts, casting, concreting and fixing of ""E"" type lock. Note: i) The contractor will provide holding down bolts, ii) Bottom of appratus cases should be filled with sand and the top surface covered with masonry work and neat cementing." | — | — | — | 1,82,738.7 | |
| — | 30.00 | — | — | ||
| Fixing, wiring of terminal strips, bakelite strip, transformers,relays fuses with base and supply and fixing of shelves for full appratus case with termination earthing of cable and wiring with lettering as required including supply of wires and micsellenous materials, sand filling and plastering over sand filling per location.(All materials except transformers, relay, terminal strips, bakelite strip and fuses with base to be spplied by the contractor.) | — | — | — | 1,45,326 | |
| — | 6.00 | — | — | ||
| Filling earth around location box/signal post for a width of 0.5 m on all sides, upto a level of 150 mm below the foundation top. This work includes consolidation of earth by watering as per site enginner. | — | — | — | 978.54 | |
| — | 50.00 | — | — | ||
| Supply of slotted angle for fixing hylem sheets in steel apparatus cases. (Size 40x40x2mm). Inspection Consignee | — | — | — | 11,453.5 | |
| — | 6.00 | — | — | ||
| Supply of paper base hylum sheet 12 mm thick. Inspection - Consignee. | — | — | — | 44,335.62 | |
| — | 30.00 | — | — | ||
| Painting of two coats of enamel paint over one coat of red oxideprimer and there after numbering on the following items afterscrapping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied bythe contractor. Numbering is as per practice of the ECR anddirectives of the site Engineer. Location boxes inside and Outside surfaces with Aluminium paint. (a) Single case. | — | — | — | 42,115.8 | |
| — | 36.00 | — | — | ||
| Painting of two coats of enamel paint over one coat of red oxideprimer and there after numbering on the following items afterscrapping and cleaning of the surface where ever necessary.Primer and paints both Asian paint make are to be supplied bythe contractor. Numbering is as per practice of the ECR anddirectives of the site Engineer. Location boxes inside and outside surfaces with Aluminium paint. Main signal post, signal unit,surface base and complete fitting as per ECRly standard practice. | — | — | — | 40,920.12 | |
| — | 6.00 | — | — | ||
| Painting of two coats of enamel paint over one coat of red oxideprimer and there after numbering on the following items after scrapping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied bythe contractor. Numbering is as per practice of the ECR anddirectives of the site Engineer. Location boxes inside and outsidesurfaces with Aluminium paint. Lifting barrier assembly complete. | — | — | — | 19,878 | |
| — | 12.00 | — | — | ||
| Repair of PUCCA Roads to original state in level X-ing area after road cutting & cable laying works with required concreting etc. as per site engineer. All materials shall be supplied by the contractor. | — | — | — | 5,243.64 | |
| — | 12.00 | — | — | ||
| Relay AC immune, plug in type style QBCA1 DC biased point contractors, 24V, 2F(HD), 4B contact, front contacts (Heavy Duty) and nack contacts metal to carbon, complete with plug board , retaining clip and connectors confirming to BRS-943, IRS:S-34 & IRS:S-23 and configuration approved by RDSO. The interlocking code for this unit shall be BCEJK. Inspection-RDSO | — | — | — | 85,708.32 | |
| — | 6.00 | — | — | ||
| Supply of flasher relay (WSF/BRISK/Anuvidyut or similar) 60 flasher per minute as per RDSO Specification No. RDSO/SPN/176/2002 (as applicable). Inspection: RDSO. | — | — | — | 37,198.62 | |
| — | 12.00 | — | — | ||
| Supply of fail safe electronic time delay device mounted on Q series relay base & convered with fixed timing of 60 sec. As per RDSO Spec.no. IRS-S-61/2000, IRS-S-34 & IRS-S-23 (as applicable) or latest. Interlocking code for this relay shall be AFGKY. Make- Anu Vidyt or similar. Inspection: RDSO. | — | — | — | 91,858.8 | |
| — | 12.00 | — | — | ||
| Supply and Installation of basic material to construct unit maintenance free earth as per RDSO Spc.No.RDSO/SPN/ 197/ 2008 or latest, consisting the following (Inspection:Supply Portion- RITES) (i) Copper bonded steel electrodes of 3.0 meter long & 17.0 mm dia with Cu-bondign thickness of min. 250 microns and UL listed and marked =1 no.(ii) Earth enhancement material supplied in sealed bags of min. 10 Kgs =3 nos. (iii) Cu-strip 150x25x6 mm to terminate earth rod=1 no.(iv) Cu-strip 300x25x6 mm (MEEB)=1 no.(v) Cu-strip 150x25x6 mm (SEEB)=1 no.(vi) digging the earth to the required depth(vii) Insertion of electrode(viii) Filling of earth enhancing compound (30 Kg) provision of exothermic weld connection on copper tape/bus bar of 25 mm x 6mm x 150 mm to the earth electrodes all the materials, tools and features required for the weld to be arranged by the contractor-1 no.(ix) Trenching, laying & provision of exothermic weld connecting, one to connect copper tape/35 sq mm multi strand single core PVC insulated copper cable to the copper strip/tape/ busbar welded to the earth electrode and another to the copper tape to be fixed inside the equipment/relay rack/apparatus room as per RDSO's Spec (fixtures for mounting the copper tape inside the relay room, weld materials, tool features and all other materials required for the weld shall be arranged by the (x) Exothermic weld connection, fixing of Cu-strips and routing the cables to bus bar in equipment/relay room (all other materials requird for the work shall be borne by the contractor.(xi) Construction of concrete inspection chamber as per RDSO spec.(xii) Any other material said required as per RDSO spec.NOTE:(i) Above includes interconnection of the earthing installed with the already existing earthing electrode, if any, as per site requirement and as per instruction of site incharge. (2) Any other material required as per RDSO spec. (3) All materials required for compelete installation of maintenance free earth, to be supplied by the contractor. | — | — | — | 1,91,181.72 | |
| — | 24.00 | — | — | ||
| Supply of MS Number plate (275mmx450mmx2mm) with fixing clamps. Letter shall be of black colour in the white back groung. Details of description shall be given by site engineer. The plate & clamps shall be painted before lettering of signal numbers. Inspection: Consignee. | — | — | — | 27,802.08 | |
| — | 12.00 | — | — | ||
| Supply of P/G plate marker.Details of description shall be given by site engineer. Inspection: Consignee. | — | — | — | 4,015.2 | |
| — | 12.00 | — | — | ||
| Fixing of P/G name plate marker with coplete fitting as per instruction of site engineer. | — | — | — | 3,769.56 | |
| — | 12.00 | — | — | ||
| Supply of SLB/BSLB/SB for SLB/BSLB REF. RDSO DRG. No.SA- 2373(with latest amendment). Inspection : Consignee. | — | — | — | 20,075.76 | |
| — | 12.00 | — | — | ||
| Casting, Concreting and curing of foundation & erection for SLB/BSLB/SB as per DRG. No.S&T/C- 34 (NKG). Including supply & fixing of holding down bolts & nuts. | — | — | — | 1,03,646.64 | |
| — | 12.00 | — | — | ||
| Supply and installation of CO2 type fire extinguisher capacity 4.5 Kg capacity ISI Mark IS: 15683 operating temperature (-30) to (50) for class 13B type of fore with 1 mtr. Hose pope fitted with PVC bent horn complete in alll respect. Inspection: Consignee. | — | — | — | 2,25,878.82 | |
| — | 6.00 | — | — | ||
| Concreeting on Railway cables/S&T gears with 1:2:4 massonary work. All materials required for execution of the work will be supplied by firm. | — | — | — | 30,517.14 | |
| — | 6.00 | — | — | ||
| Supply, Installation, Testing and commissioning of Remote TeminalUnit(RTU) of datalogger system for Railway S&T installation as per RDSO spec. No.IRS:S 99/2006 with 64 input and 16 analog inputs. Inspection: RDSO | — | — | — | 20,91,910.08 | |
| — | 132.00 | — | — | ||
| Supply of PBT ARA terminal block as per IRS Spec. No. IRS: S-75/2006 (Rev.2) or latest. Inspection: RDSO i) 6 way (small) (Drawing No. SA-23741A) (Alt-4) or latest | — | — | — | 1,12,761 | |
| — | 132.00 | — | — | ||
| Termination of cable cores on ARA terminals or on 8 way terminals in the cable termination rack. This includes all associated works of pulling out the cable from under ground, Peeling off insulation, dressing of cable core supported on sting rod with contractors own materials as per instruction of the site incharge. The cable armour to be earthed. Cable tags to be provided. Note-Unit as Number to be treated as nos. of Core | — | — | — | 2,511.96 | |
| — | 270.00 | — | — | ||
| "Carrying out alterations to the existing relay wiring at relay rack / location as per the circuit diagram. The work includes releasing the existing unused wires and wiring the relays using wire PVC 16/0.02 mm copper. {Wire PVC 16/0.02 mm copper, paint, soldering materials and all other miscellaneous materials required for the work shall be supplied by the contractor.) Inspection - RDSO for PVC wire" | — | — | — | 1,61,090.1 | |
| — | 45.00 | — | — | ||
| Supply of LC/FC, FCPC/SCPC etc. OFC Patch cord (10 Mtrs Long) as per site requirement to suit the OFC terminations and the IPMPLS equipment supplied. Inspection:Consignee. | — | — | — | 5,000.85 | |
| — | 45.00 | — | — | ||
| Supply of CAT-6 Patch Cord-5mtrs length [Detailed Specification in Technical Document]. Inspection: Consignee. | — | — | — | 20,587.05 | |
| — | 6.00 | — | — | ||
| Supply of open optical fibre splicing (joint Enclosure (24/12/6 Fibre as per required at site) loose tube complete with all accessories as per TEC specification no. TEC/GR/OJC-02/02 sept 2003 or latest. Inspection Consignee." | — | — | — | 18,000 | |
| — | 295.00 | — | — | ||
| Fiber Splicing. As per Instruction of site engineer. | — | — | — | 81,458.35 | |
| — | 8.00 | — | — | ||
| Supply, fixing and termination of 24F FDMS 19" Rack Mount with Telescopic type loaded with SC '0' DB & Adaptor SC SM Pigtail 1.5 meters all accessories required for installation [Detailed Specification in Technical Document] Inspection : RITES | — | — | — | 1,26,956.08 | |
| — | 15500.00 | — | — | ||
| Blowing / Drawing of OFC 24F/12F/6F Power Cable and CAT Cable (including crimping) through PVC Conduit/Duct /DWC/GI Pipe already installed. | — | — | — | 74,090 | |
| — | 14.00 | — | — | ||
| Supply of permanent lubricated HDPE telecom Duct for use as under ground optical fibre cable conduit size 40/33 mm (outer diameter / inner diameter as per latest RDSO specification No. RDSO/SPN/TC/45/ 2013 revision with amendment No 1.0 & 2.0 and with following accessories. a)End plug 02 Nos for each KM of duct b) Cable sealing plug 1 No for each Km of duct c) Plastic couplers -Slp fit type 2 Nos for each Km of duct & d) End cap to provide align with drum -2 Nos for each Km of duct. Inspection Consignee. | — | — | — | 9,38,000 | |
| — | 14.00 | — | — | ||
| Laying of HDPE duct in the trench excavated under above items and in the protective works (i. e. inside G. l pipes / DWC pipes/boring etc.). at different places as per instruction of site engineer. | — | — | — | 42,000 | |
| — | 6.00 | — | — | ||
| Supply & Installation of Earth Leakage detector 8 channel as per RDSO/SPN/256/2002 or latest with 6 digit counter (in 19' Sub Rack with insulation tester). Insepection - RDSO | — | — | — | 6,97,578 | |
| — | 3.00 | — | — | ||
| Supply, installation and commissioning of Universal Fail Safe Block interface -MUX specification No.IRS-S104/2012 ver.0 with latest amdt. Suitable to work on OFC /1 Quad cable as 16 input-16 output multiplexure for IB Signaling including 68 Nos of QN1 (8F/8B) relays for system commissioning. Inspection: RDSO. | — | — | — | 19,89,077.16 | |
| — | 6.00 | — | — | ||
| Supply of external Leased line modem for networking of RTUs. Inspection by: RDSO | — | — | — | 2,05,320 | |
| — | 6.00 | — | — | ||
| Design, fabrication & supply of fuse Auoto Changeover system for 24 nos. of external non deterating type or 'G' type fuses fro 4Amp to 10 Amp capacity including extender fixing plates of stainless steel of 1.5 mm with suitable fixing holes as per RDSO spec no.- RDSO/SPN/209/2012 rev 1.0 or latest. Inspection: RDSO. | — | — | — | 1,14,000 | |
| — | 6.00 | — | — | ||
| Design, fabrication & supply of fuse Auoto Changeover system for 32 nos. of external non deterating type or 'G' type fuses from 0.6Amp to 4 Amp capacity including extender fixing plates of stainless steel of 1.5 mm with suitable fixing holes as per RDSO spec no.- RDSO/SPN/209/2012 rev 1.0 or latest. Inspection: RDSO. | — | — | — | 1,12,200 | |
| — | 6.00 | — | — | ||
| Instalation, wiring teststing and commisining of fuses indication cum monitioring and aotomatic changeover system (Item no.-87). | — | — | — | 2,400 | |
| — | 6.00 | — | — | ||
| Instalation, wiring teststing and commisining of fuses indication cum monitioring and aotomatic changeover system (Item no.-88). | — | — | — | 2,400 | |
| — | 6.00 | — | — | ||
| Supply of 4G modem for generation of failure alarm etc. Inspection: Consignee. | — | — | — | 90,000 | |
| — | 0.20 | — | — | ||
| PVC Insulated Jumper wire 1 X 1 mm wire as per IRS(S) 76/89 with letast Amdt. Inspection: RDSO. | — | — | — | 1,700 | |
| — | 0.40 | — | — | ||
| PVC Insulated 60 Core X 0.6 mm indoor cable as per IRS(S) 76/89 with letast Amdt. Inspection: RDSO. | — | — | — | 50,000 | |
| — | 6.00 | — | — | ||
| Supply of Mountable Rack complate with all fitting etc. Inspection: Consignee. | — | — | — | 36,000 | |
| — | 6.00 | — | — | ||
| Fabrication, supply & wiring, installation of remote buzzer for Fuse Alarm System as per Tech. Spec. (Common Audio Visual alarm unit for FACS as per RDSO/ SPN 2009/2012 rev. 1.0 or letast at panel RR/ESM room as per instruction of site Incharge. Inspection: RDSO. | — | — | — | 9,000 | |
| — | 5000.00 | — | — | ||
| Transportation of materials by 15 MT capacity truck or similar. | — | — | — | 6,71,050 | |
| — | 25.00 | — | — | ||
| Loading unloading of heavy S&T materials in 15MT truck. | — | — | — | 3,08,549 | |
| — | 20.00 | — | — | ||
| Supply & installation of Domino with pre wiring and all accessories with Face Cover plate and writing. Inspection: Consignee. | — | — | — | 53,506.6 | |
| — | 40.00 | — | — | ||
| Supply & Installation of iPanel Indication Lamp LED twin bulb 1.2 W, 24V (Red, Yellow). Inspection: Consignee. | — | — | — | 4,240 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
OpeningofLC.pdf
ATTACHMENT
TederformfortheTenderer2022.pdf
ATTACHMENT
AnnexVwithcorrection.pdf
ATTACHMENT
PerformaofPoliceVerification.pdf
ATTACHMENT
GUIDELINESTOTHETENDERER.pdf
ATTACHMENT
LatestGCC-2022-ACS6.pdf
ATTACHMENT
CorrectionSlipNo1ofGCC2022.pdf
ATTACHMENT
CorrectionSlipNo2ofGCC2022.pdf
ATTACHMENT
CorrectionSlipNo.3ofGCC2022.pdf
ATTACHMENT
CorrectionSlipNo4ofGCC2022.pdf
ATTACHMENT
CorrectionSlipNo5ofGCC2022.pdf
ATTACHMENT
CorrectionSlipNo.6ofGCC2022.pdf
ATTACHMENT
CorrectionSlipNo7ofGCC2022.pdf
ATTACHMENT
CorrectionSlipNo11ofGCC2022.pdf
ATTACHMENT
NewfinancialcritariaVIB.pdf
ATTACHMENT
Procedureforundertakingdiggingwork11.pdf
ATTACHMENT
AnnexVIGCC2022.pdf
ATTACHMENT
Receiptcertificatforsuppyonly-AnnexR.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .