CAMOUFLAGE PAINTING TO CERTAIN BLDGS AT HARNI CAMP, HARNI AIRFIELD AND MAKARPURA AT AFS BARODA

M&L for preparation of old decorated surfaces of walls including cornices , plasters by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls upto 4th floor including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed

Descripton all as per item Ser No 1.00 above but applying two coats of white wash on wall surfaces after complete removal of existing treatment all as specified and directed.

Descripton all as per item Ser No 1.00 above but applying one coat of white wash on ceiling surfaces complete all as specified and directed

Description all as per item Ser No 1.00 here-in-before but applying two coats of white wash on ceiling surfaces complete all as specified and directed

M&L for Preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying with one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old decorated surfaces of walls including cornices , plasters by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil bound emulsion distemper on wall surfaces (any tint and shade as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed

Description all as per item Ser No 7.00 above but applying one coat of oil bound emulsion distemper on ceiling surfaces complete all as specified and directed

M&L for complete removal of existing treatment on wall surfaces by scraping down, rubbiing down and washing with water to the satisfaction of Engineer-in-Charge and applying two coats of oil bound emulsion distemper on walls (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed

Description all as per item Ser No 9.00 above but applying two coats of oil bound emulsion distemper on ceiling surfaces complete all specified and directed.

M&L for complete removal of existing treatment on wall surfaces by scraping down, rubbiing down and washing with water to the satisfaction of Engineer-in-Charge and applying two coats of Oil Bound Emulsion distemper over and including applying 3mm thick wall care putty on walls (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls, chajjas including cornices, plasters by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots, tree roots etc filling up all cracks and defects with CM 1:3 to the entire satisfaction of Engineer-in-Charge and applying one coat of exterior ACRYLIC Emulshion paint Camouflage pattern as per approved CCD Scheme design (Colour or shade as approved by GE) Camouflage pattern as per manufacturers instruction complete upto 4th floor including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed

M&L for complete removal of existing treatment of plastered or unplastered surfaces of walls, chajjas etc any by scrapping down completely, rubbing down washing with water and treating the surface from all loose dirt chalk grease fungi alkali flakes, tree roots etc burshing if any etc filling up all cracks and defects with CM 1:3 to the entire satisfaction of Engineer-in-Charge and applying two coats of Exterior Acrylic Emulshion paint in Camouflage pattern as per approved CCD Scheme design (Colour or shade as approved by GE) Camouflage pattern over and including a coat of primer as per manufacturers instruction complete upto 4th floor with requried safety measures etc including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed

Description all as per item Ser No 13.00 above but on ceiling surfaces complete all as specified and as directed

M&L for preparation of old plastered or unplastered surfaces of walls including cornices, plasters by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy \spots to the entire satisfaction of Engineer-in-Charge and applying one coat of exterior ACRYLIC Emulshion paint as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed

M&L for preparation of old plastered or unplastered surfaces of walls including cornices , plasters by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of Cement Base Paint on walls including necessary steel scafolding upto 4th storey complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed

M&L for complete removal of existing treatment by scraping down completely on brick walls/stone walls/concrete surfaces plastered or unplastered thoroughly, rubbing down, washing with water to the entire satisfaction of Engineer-in-Charge and applying one coats of Cement Base Paint in Camouflage pattern as per approved CCD Scheme design (Colour or shade as approved by GE) as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed

Description all as per item Ser No 17.00 above but on applying one coat of cement base paint camouflage pattern on ceiling surfaces complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 10mm thick rendering on fair faces brick work or concrete surfaces in cement mortar 1:6 finishing surfaces even and smooth without using extra cement Complete all as specified and directed.

M&L for rendering in two layers (i.e) CM 1:6, 10mm thick as first layer and CM 1:4, 5mm thick as 2nd layer including mixing water proofing compound @3% by weight of cement finished even and smooth without using extra cement on stone masonry surfaces or surfaces other than fair face of brick or on concrete surface Complete all as specified and directed (NOTE: WPC shall be measured and paid separately).

Supply only integral water proofing compound @ 3% by wt of cement finished even and smooth (without using extra cement) complete all as specified and directed

M&L for 5 mm thick rendering on ceiling surfaces of concrete in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound emulsion distemper on walls (as approved by GE) including necessary priming coat Complete all as specified and directed.

Description all as per item Ser No 24.00 above but on ceiling surfaces complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of exterior ACRYLIC Emulshion paint Camouflage pattern over a priming coat on walls upto 4th floor including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed (Colour/shade as directed by GE).

M&L for complete removal of loose/cracked, spalled concrete upto depth of reinforcement rods or depth of carbonation incl reinforcement if required from existing surface of RCC members like roof projection, chajjas, beams, columns etc. and cleaning of the reinforcement bars and exposed concrete surface of RCC member by chipping, wire brushing, emery sheets etc. and provide required reinforcement by welding/binding to connect or overlap with existing reinforcement and application of zinc primer on all sides of the reinforcement and application of epoxy bonding agent to exposed old concrete surfaces. the job shall be carried out with contractors own pneumatic chipper/manually with all required materials (reinforcement etc) resoures, tools, and tackels upto the satisfaction of EIC complete upto 4th floor all as specified and directed.

M&L for providing and placing in position Micro-concrete as per relevant ASTM/BS/IS having Compressive strength of 45 mpa at 2 days of make pidilite/BASF/Sika/Fosroc or equivalent in RCC members like roof projection, chajjas, beams, columns etc. which shall be pre-packed single component, chloride free, Non shrink, free flow, self compacting and mixed as per manufactures specifications, including reuired leak proof shuttering, presoaking of substrate, manual application or pumping, manpower and tools & tackels the satisfaction of EIC complete upto 4th floor height complete all as specified and directed

M&L for filling surface cracks not exc 7mm to 9mm wide with "Dr fixit" cracks X power or equivalent polymer modified cracks filler all as per manufacturer instructions complete all as specified and directed.

M&L for complete removal of existing treatment on plastered or unplastered surfaces of walls, chajjas etc any by scraping down completely, rubbing down washing with water and treating the surface from all loose dirt chalk grease fungi alkali flakes, tree roots etc brushing if any etc. filling up all cracks and defects with CM1:3 to the entire satisfaction of Engineer-in-Charge or newly plastered surface and applying two coats of damp proof paint make : Asian smartcare white Damp proof of required shed over primer as per manufacturers instructions completely and satisfaction of Engineer-in-Charge, including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete upto 4th floor all as specified and directed

Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding.