Providing, Supplying & Fixing Of Precast Bench 415-Nos. For Dhrol Nagarpalika Including One Years Warrantee At, Dhrol, Dist: Jamnagar Under MLA Grant (Year-2025-26)(Second Call)

NAME OF WORK:- PROVIDING, SUPPLYING & FIXING OF PRECAST BENCH, AS PER VARIOUS LOCATION, AT.

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

5 Schedule - "B"- 5

6 Schedule - "B"- 6

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ _______% Above / Below___________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my /our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 9,66,979=00 Put to Tender Rs. 9,66,979=00

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST :- JAMNAGAR

SCHEME : MLA GRANT (YEAR-2025-26)

NAME OF WORK:- PROVIDING, SUPPLYING & FIXING OF PRECAST BENCH

LOCATION:- (1) Chmunda Plot, Jodiya Road, (2) Near Police Chowki Ambedkarnagar, Near Vinubhai Shop (3)

Near Van Vibhag Bus Stop (4) Devipujak Samaj Vas (5) Near Rohitdas Jagya (6) Near Jesalpir Jagya, Van Vibhag

Jagya Bhuchar Mori Jaher Jagya

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing, Supplying & Fixing of Labels bearing - Type of material and Brand

name / Manufacturer's name Precast Concrete Reinforced Bench

Concrete mix design M-30 Grade concrete mix in accordance with IS :

10269/Latest in gray cement by using vibro - compaction technique and with

reinforcement as detailed in Govng. specn.

Reinforcement steel TMT reinforcement bars conforming to IS : 1786/latest of

dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used

as stirrups as per drawing

Stirrups details 10 nos. - 4 mm dia bar @ 150 mm C/C

Main reinforcement bar 4 nos. - 10 mm dia bar

Adequate clean concrete cover 15 mm minimum

Material for connecting seating plank with leg 12 mm dia X 65 mm long

galvanized steel countersunk bolts Confmg. to IS : 1367 / latest with EVA

Material for connecting back rest plank with leg Half threaded carriage bolts and

nuts of size 165 mm length X 8 mm dia with EVA and steel washers

RCC planks Using M-30 grade gray cement mixed with 3 % red pigment

Governing Specification Surface Mount Reinforcement Bench Conforming to

RDSO specn. (ITEM NO. 172020 OF USSOR)

Design Conforming to Drawing No. RDSO/WKS/2014/3 Date : 07.11.2014

Technique Compaction technique and with reinforcement conforming to Govng.

Chair / Bench Arms Without

Transportations / Freight charges offer prices are on free delivery at consignee

Scope of supply Scope of supply includes Erection and installation of precast

concrete reinforce benches with backrest

Approval of advance sample before bulk supply No Advance Sample

Unit of measurement Complete bench

Construction of Bench With Concrete Mix Design - Reinforcement steel -

Connections - and Paint

Members of bench RCC base support and Planks

Installation Each seating plank ( bottom ) of bench bolted with leg by help of

mm dia. X 65 mm length galvanized steel countersunk bolts with EVA washer –

Backrest planks fitted with half threaded carriage bolts and nuts of size 165 mm

X 8 mm dia with EVA & steel washer

Seat / plank length ± 3 mm 1500 mm

Seat height ± 3 mm 450 mm

Seat width ± 3 mm 440 mm

Total bench height ( including backrest ) ± 3 mm 1000 mm

Size of wider plank ± 3 mm 1500 mm X 200 mm X 50 mm

Size of smaller plank ± 3 mm 1500 mm X 100 mm X 50 mm

Plank hole dia ± 3 mm 14 mm

Connecting holes from each end ± 3 mm 200 mm

Leg width ± 3 mm 140 mm

Distance between both legs ± 3 mm 340 mm

Plank painting Acrylic based paint conforming to IS : 15489 / Latest of colour as

per buyer's choice

Bench finishing As per approved sample

Finish of exposed surface Uniformly smooth texture with no bugholes and

smooth mold seams

Hole finish ( To prevent pilferage ) Hole visible at the back side of bench sealed

with cement mortar Compressive strength of concrete mix Not less than

MPa at 28 days 50.00 2330.07 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST :- JAMNAGAR

SCHEME : MLA GRANT (YEAR-2025-26)

NAME OF WORK:- PROVIDING, SUPPLYING & FIXING OF PRECAST BENCH

LOCATION:- (1) Jodiya Gate ram chowk char chowk (2) kuambhar sheri (3) near revnath jagya (4) near

Bramahnath jagya (5) near sat dairy (6) vaniya chowk (7) mochi bazar (8) manek chowkdi near machho mataji (9)

near mansukhbhai raghubhai parmar house (10) near satvara samaj wadi (11) near lohana samaj wadi (12) near

brahma samaj wadi (13) near prajapati samaj wadi kuambhar vas (14) common plot jodiya road

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing, Supplying & Fixing of Labels bearing - Type of material and Brand

name / Manufacturer's name Precast Concrete Reinforced Bench

Concrete mix design M-30 Grade concrete mix in accordance with IS :

10269/Latest in gray cement by using vibro - compaction technique and with

reinforcement as detailed in Govng. specn.

Reinforcement steel TMT reinforcement bars conforming to IS : 1786/latest of

dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used

as stirrups as per drawing

Stirrups details 10 nos. - 4 mm dia bar @ 150 mm C/C

Main reinforcement bar 4 nos. - 10 mm dia bar

Adequate clean concrete cover 15 mm minimum

Material for connecting seating plank with leg 12 mm dia X 65 mm long

galvanized steel countersunk bolts Confmg. to IS : 1367 / latest with EVA

Material for connecting back rest plank with leg Half threaded carriage bolts and

nuts of size 165 mm length X 8 mm dia with EVA and steel washers

RCC planks Using M-30 grade gray cement mixed with 3 % red pigment

Governing Specification Surface Mount Reinforcement Bench Conforming to

RDSO specn. (ITEM NO. 172020 OF USSOR)

Design Conforming to Drawing No. RDSO/WKS/2014/3 Date : 07.11.2014

Technique Compaction technique and with reinforcement conforming to Govng.

Chair / Bench Arms Without

Transportations / Freight charges offer prices are on free delivery at consignee

Scope of supply Scope of supply includes Erection and installation of precast

concrete reinforce benches with backrest

Approval of advance sample before bulk supply No Advance Sample

Unit of measurement Complete bench

Construction of Bench With Concrete Mix Design - Reinforcement steel -

Connections - and Paint

Members of bench RCC base support and Planks

Installation Each seating plank ( bottom ) of bench bolted with leg by help of

mm dia. X 65 mm length galvanized steel countersunk bolts with EVA washer –

Backrest planks fitted with half threaded carriage bolts and nuts of size 165 mm

X 8 mm dia with EVA & steel washer

Seat / plank length ± 3 mm 1500 mm

Seat height ± 3 mm 450 mm

Seat width ± 3 mm 440 mm

Total bench height ( including backrest ) ± 3 mm 1000 mm

Size of wider plank ± 3 mm 1500 mm X 200 mm X 50 mm

Size of smaller plank ± 3 mm 1500 mm X 100 mm X 50 mm

Plank hole dia ± 3 mm 14 mm

Connecting holes from each end ± 3 mm 200 mm

Leg width ± 3 mm 140 mm

Distance between both legs ± 3 mm 340 mm

Plank painting Acrylic based paint conforming to IS : 15489 / Latest of colour as

per buyer's choice

Bench finishing As per approved sample

Finish of exposed surface Uniformly smooth texture with no bugholes and

smooth mold seams

Hole finish ( To prevent pilferage ) Hole visible at the back side of bench sealed

with cement mortar Compressive strength of concrete mix Not less than

MPa at 28 days 100.00 2330.07 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST :- JAMNAGAR

SCHEME : MLA GRANT (YEAR-2025-26)

NAME OF WORK:- PROVIDING, SUPPLYING & FIXING OF PRECAST BENCH

LOCATION:- (1) near main bazar jaher jagya (2) near vankar samaj wadi (3) near sbi bank (4) nera old mamlatdar

office near urban health center (5) near darbar gadh (6) near m.d. mehta sankul (7) nagar seri near jahar jagya (8)

daraji seri (9) near mamapir jagya

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing, Supplying & Fixing of Labels bearing - Type of material and Brand

name / Manufacturer's name Precast Concrete Reinforced Bench

Concrete mix design M-30 Grade concrete mix in accordance with IS :

10269/Latest in gray cement by using vibro - compaction technique and with

reinforcement as detailed in Govng. specn.

Reinforcement steel TMT reinforcement bars conforming to IS : 1786/latest of

dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used

as stirrups as per drawing

Stirrups details 10 nos. - 4 mm dia bar @ 150 mm C/C

Main reinforcement bar 4 nos. - 10 mm dia bar

Adequate clean concrete cover 15 mm minimum

Material for connecting seating plank with leg 12 mm dia X 65 mm long

galvanized steel countersunk bolts Confmg. to IS : 1367 / latest with EVA

Material for connecting back rest plank with leg Half threaded carriage bolts and

nuts of size 165 mm length X 8 mm dia with EVA and steel washers

RCC planks Using M-30 grade gray cement mixed with 3 % red pigment

Governing Specification Surface Mount Reinforcement Bench Conforming to

RDSO specn. (ITEM NO. 172020 OF USSOR)

Design Conforming to Drawing No. RDSO/WKS/2014/3 Date : 07.11.2014

Technique Compaction technique and with reinforcement conforming to Govng.

Chair / Bench Arms Without

Transportations / Freight charges offer prices are on free delivery at consignee

Scope of supply Scope of supply includes Erection and installation of precast

concrete reinforce benches with backrest

Approval of advance sample before bulk supply No Advance Sample

Unit of measurement Complete bench

Construction of Bench With Concrete Mix Design - Reinforcement steel -

Connections - and Paint

Members of bench RCC base support and Planks

Installation Each seating plank ( bottom ) of bench bolted with leg by help of

mm dia. X 65 mm length galvanized steel countersunk bolts with EVA washer –

Backrest planks fitted with half threaded carriage bolts and nuts of size 165 mm

X 8 mm dia with EVA & steel washer

Seat / plank length ± 3 mm 1500 mm

Seat height ± 3 mm 450 mm

Seat width ± 3 mm 440 mm

Total bench height ( including backrest ) ± 3 mm 1000 mm

Size of wider plank ± 3 mm 1500 mm X 200 mm X 50 mm

Size of smaller plank ± 3 mm 1500 mm X 100 mm X 50 mm

Plank hole dia ± 3 mm 14 mm

Connecting holes from each end ± 3 mm 200 mm

Leg width ± 3 mm 140 mm

Distance between both legs ± 3 mm 340 mm

Plank painting Acrylic based paint conforming to IS : 15489 / Latest of colour as

per buyer's choice

Bench finishing As per approved sample

Finish of exposed surface Uniformly smooth texture with no bugholes and

smooth mold seams

Hole finish ( To prevent pilferage ) Hole visible at the back side of bench sealed

with cement mortar Compressive strength of concrete mix Not less than

MPa at 28 days 100.00 2330.07 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST :- JAMNAGAR

SCHEME : MLA GRANT (YEAR-2025-26)

NAME OF WORK:- PROVIDING, SUPPLYING & FIXING OF PRECAST BENCH

LOCATION:- (1) goswami samaj smashan (2) meman chowk (3) fullwadi road (4) near rajput samaj wadi (5) near

post office (6) near mahalakshmi mill jehar jagya

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing, Supplying & Fixing of Labels bearing - Type of material and Brand

name / Manufacturer's name Precast Concrete Reinforced Bench

Concrete mix design M-30 Grade concrete mix in accordance with IS :

10269/Latest in gray cement by using vibro - compaction technique and with

reinforcement as detailed in Govng. specn.

Reinforcement steel TMT reinforcement bars conforming to IS : 1786/latest of

dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used

as stirrups as per drawing

Stirrups details 10 nos. - 4 mm dia bar @ 150 mm C/C

Main reinforcement bar 4 nos. - 10 mm dia bar

Adequate clean concrete cover 15 mm minimum

Material for connecting seating plank with leg 12 mm dia X 65 mm long

galvanized steel countersunk bolts Confmg. to IS : 1367 / latest with EVA

Material for connecting back rest plank with leg Half threaded carriage bolts and

nuts of size 165 mm length X 8 mm dia with EVA and steel washers

RCC planks Using M-30 grade gray cement mixed with 3 % red pigment

Governing Specification Surface Mount Reinforcement Bench Conforming to

RDSO specn. (ITEM NO. 172020 OF USSOR)

Design Conforming to Drawing No. RDSO/WKS/2014/3 Date : 07.11.2014

Technique Compaction technique and with reinforcement conforming to Govng.

Chair / Bench Arms Without

Transportations / Freight charges offer prices are on free delivery at consignee

Scope of supply Scope of supply includes Erection and installation of precast

concrete reinforce benches with backrest

Approval of advance sample before bulk supply No Advance Sample

Unit of measurement Complete bench

Construction of Bench With Concrete Mix Design - Reinforcement steel -

Connections - and Paint

Members of bench RCC base support and Planks

Installation Each seating plank ( bottom ) of bench bolted with leg by help of

mm dia. X 65 mm length galvanized steel countersunk bolts with EVA washer –

Backrest planks fitted with half threaded carriage bolts and nuts of size 165 mm

X 8 mm dia with EVA & steel washer

Seat / plank length ± 3 mm 1500 mm

Seat height ± 3 mm 450 mm

Seat width ± 3 mm 440 mm

Total bench height ( including backrest ) ± 3 mm 1000 mm

Size of wider plank ± 3 mm 1500 mm X 200 mm X 50 mm

Size of smaller plank ± 3 mm 1500 mm X 100 mm X 50 mm

Plank hole dia ± 3 mm 14 mm

Connecting holes from each end ± 3 mm 200 mm

Leg width ± 3 mm 140 mm

Distance between both legs ± 3 mm 340 mm

Plank painting Acrylic based paint conforming to IS : 15489 / Latest of colour as

per buyer's choice

Bench finishing As per approved sample

Finish of exposed surface Uniformly smooth texture with no bugholes and

smooth mold seams

Hole finish ( To prevent pilferage ) Hole visible at the back side of bench sealed

with cement mortar Compressive strength of concrete mix Not less than

MPa at 28 days 50.00 2330.07 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST :- JAMNAGAR

SCHEME : MLA GRANT (YEAR-2025-26)

NAME OF WORK:- PROVIDING, SUPPLYING & FIXING OF PRECAST BENCH

LOCATION:- (1) near police station (2) nagarpalika garden (3) river bank a.j. smashan (4) near benk of baroda (5)

gandhi chowk near pgvcl office (6) near chandrasihnji highschool (7) near hardhol highschool (8) near patel

samaj (9) near s.t. depo

SCHEDULE - "B-5"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing, Supplying & Fixing of Labels bearing - Type of material and Brand

name / Manufacturer's name Precast Concrete Reinforced Bench

Concrete mix design M-30 Grade concrete mix in accordance with IS :

10269/Latest in gray cement by using vibro - compaction technique and with

reinforcement as detailed in Govng. specn.

Reinforcement steel TMT reinforcement bars conforming to IS : 1786/latest of

dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used

as stirrups as per drawing

Stirrups details 10 nos. - 4 mm dia bar @ 150 mm C/C

Main reinforcement bar 4 nos. - 10 mm dia bar

Adequate clean concrete cover 15 mm minimum

Material for connecting seating plank with leg 12 mm dia X 65 mm long

galvanized steel countersunk bolts Confmg. to IS : 1367 / latest with EVA

Material for connecting back rest plank with leg Half threaded carriage bolts and

nuts of size 165 mm length X 8 mm dia with EVA and steel washers

RCC planks Using M-30 grade gray cement mixed with 3 % red pigment

Governing Specification Surface Mount Reinforcement Bench Conforming to

RDSO specn. (ITEM NO. 172020 OF USSOR)

Design Conforming to Drawing No. RDSO/WKS/2014/3 Date : 07.11.2014

Technique Compaction technique and with reinforcement conforming to Govng.

Chair / Bench Arms Without

Transportations / Freight charges offer prices are on free delivery at consignee

Scope of supply Scope of supply includes Erection and installation of precast

concrete reinforce benches with backrest

Approval of advance sample before bulk supply No Advance Sample

Unit of measurement Complete bench

Construction of Bench With Concrete Mix Design - Reinforcement steel -

Connections - and Paint

Members of bench RCC base support and Planks

Installation Each seating plank ( bottom ) of bench bolted with leg by help of

mm dia. X 65 mm length galvanized steel countersunk bolts with EVA washer –

Backrest planks fitted with half threaded carriage bolts and nuts of size 165 mm

X 8 mm dia with EVA & steel washer

Seat / plank length ± 3 mm 1500 mm

Seat height ± 3 mm 450 mm

Seat width ± 3 mm 440 mm

Total bench height ( including backrest ) ± 3 mm 1000 mm

Size of wider plank ± 3 mm 1500 mm X 200 mm X 50 mm

Size of smaller plank ± 3 mm 1500 mm X 100 mm X 50 mm

Plank hole dia ± 3 mm 14 mm

Connecting holes from each end ± 3 mm 200 mm

Leg width ± 3 mm 140 mm

Distance between both legs ± 3 mm 340 mm

Plank painting Acrylic based paint conforming to IS : 15489 / Latest of colour as

per buyer's choice

Bench finishing As per approved sample

Finish of exposed surface Uniformly smooth texture with no bugholes and

smooth mold seams

Hole finish ( To prevent pilferage ) Hole visible at the back side of bench sealed

with cement mortar Compressive strength of concrete mix Not less than

MPa at 28 days 50.00 2330.07 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST :- JAMNAGAR

SCHEME : MLA GRANT (YEAR-2025-26)

NAME OF WORK:- PROVIDING, SUPPLYING & FIXING OF PRECAST BENCH

LOCATION:- (1) near suncity complex (2) umiya society (3) jyoti park (4) gayatrinagar (5) gokul park jaher &

common jagya gokul park 1,2,3,4, area (6) tulsi park (7) ambedkarnagar ram park (8) pramukh darshan society

(9) near ramroti bapu aashram (10) shivam society (11) nilkanth society river bank (12) nandanvan society

common plot (13) dwarkadhish society (14) near manokamana jaher jagya (15) bhavyagreen society & jaher

jagya & jaher common mandir

SCHEDULE - "B-6"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing, Supplying & Fixing of Labels bearing - Type of material and Brand

name / Manufacturer's name Precast Concrete Reinforced Bench

Concrete mix design M-30 Grade concrete mix in accordance with IS :

10269/Latest in gray cement by using vibro - compaction technique and with

reinforcement as detailed in Govng. specn.

Reinforcement steel TMT reinforcement bars conforming to IS : 1786/latest of

dia 10 mm used as main reinforcement bar and 4 mm dia mild steel bars used

as stirrups as per drawing

Stirrups details 10 nos. - 4 mm dia bar @ 150 mm C/C

Main reinforcement bar 4 nos. - 10 mm dia bar

Adequate clean concrete cover 15 mm minimum

Material for connecting seating plank with leg 12 mm dia X 65 mm long

galvanized steel countersunk bolts Confmg. to IS : 1367 / latest with EVA

Material for connecting back rest plank with leg Half threaded carriage bolts and

nuts of size 165 mm length X 8 mm dia with EVA and steel washers

RCC planks Using M-30 grade gray cement mixed with 3 % red pigment

Governing Specification Surface Mount Reinforcement Bench Conforming to

RDSO specn. (ITEM NO. 172020 OF USSOR)

Design Conforming to Drawing No. RDSO/WKS/2014/3 Date : 07.11.2014

Technique Compaction technique and with reinforcement conforming to Govng.

Chair / Bench Arms Without

Transportations / Freight charges offer prices are on free delivery at consignee

Scope of supply Scope of supply includes Erection and installation of precast

concrete reinforce benches with backrest

Approval of advance sample before bulk supply No Advance Sample

Unit of measurement Complete bench

Construction of Bench With Concrete Mix Design - Reinforcement steel -

Connections - and Paint

Members of bench RCC base support and Planks

Installation Each seating plank ( bottom ) of bench bolted with leg by help of

mm dia. X 65 mm length galvanized steel countersunk bolts with EVA washer –

Backrest planks fitted with half threaded carriage bolts and nuts of size 165 mm

X 8 mm dia with EVA & steel washer

Seat / plank length ± 3 mm 1500 mm

Seat height ± 3 mm 450 mm

Seat width ± 3 mm 440 mm

Total bench height ( including backrest ) ± 3 mm 1000 mm

Size of wider plank ± 3 mm 1500 mm X 200 mm X 50 mm

Size of smaller plank ± 3 mm 1500 mm X 100 mm X 50 mm

Plank hole dia ± 3 mm 14 mm

Connecting holes from each end ± 3 mm 200 mm

Leg width ± 3 mm 140 mm

Distance between both legs ± 3 mm 340 mm

Plank painting Acrylic based paint conforming to IS : 15489 / Latest of colour as

per buyer's choice

Bench finishing As per approved sample

Finish of exposed surface Uniformly smooth texture with no bugholes and

smooth mold seams

Hole finish ( To prevent pilferage ) Hole visible at the back side of bench sealed

with cement mortar Compressive strength of concrete mix Not less than

MPa at 28 days 65.00 2330.07 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika