Karnataka

To Be Opened

Works

Irrigation and Other Works

Improvements of VC Canal off take gate control electrical system of kanaganamaradi

Cauvery Neeravari Nigam Limited

CNNL D and I Div Bannur | Mysuru, Karnataka

Amount: ₹2.5 LCloses: 6 Aug 20264 Aug 2026Closed

Timeline

Published4 Aug 2026
Closed6 Aug 20264 Aug 2026

Corrigenda

Corrigendum

1 updatesLatest on 4 Aug 2026Submission Ends:4 Aug 20266 Aug 2026

Date changes

Published4 Aug 2026Submission Ends4 Aug 20266 Aug 2026Financial / Cover Two Opening5 Aug 20267 Aug 2026

Tender Value

₹2.5 L

EMD Value

₹6,500

Closing Date

6 Aug 2026, 5:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

Shivkumarnayak AEE

Mobile Number

Work Description

Improvements of VC Canal off take gate control electrical system of kanaganamaradi

Tender Information

Tender ID

CNNL/2026-27/IW/WORK_INDENT4719/CALL-2

Reference Number

CNNL/2026-27/IW/WORK_INDENT4719/CALL-2

Tender Type

Open

Product Category

Irrigation and Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

CNNL D and I Div Bannur

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAnnual Turnover certificate duly signed by CA with UDIN number

RequiredKPWD Class IV Electrical License issued by Electrical Inspectorate Govt. of Karnataka & above

RequiredProfit and loss statement duly signed by competent authority

RequiredOngoing works details in the format

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The contractor should be registered in respective class Category of KPWD

The TENDER PROCEESING FEE will not be refunded

Conditional tenders will be rejected

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs.

The tender processing fee will neither be refunded nor will be transferred to other works.

The CNNL reserves the right of rejecting any or all of the tenders without assigning any reason and will not be bound to accept the lowest tender.

Applicable GST will be paid separately & GST will be deducted as per the prevailing Govt Orders from time to time & Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.

The rates quoted by the contractor must be inclusive of all Taxes, etc., (excluding GST). The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years (2021-22 to 2025-26).

One percent (1%) of the bill amount of the successful tenderer will be deducted towards the construction labour welfare fund as per Government Order LD / 300 / LET / 2006 Bangalore dated 01-01-2007 and Government letter No. PW / 134 / BMS / 2007 dated 27-07-2007

All scanned documents to be uploaded shall be in original and the executive Engineer reserves the right to verify the documents before approval.

The work includes all lead and lift and work shall be carried out as per the instructions of the Engineer-in-Charge of the work. The rates in the schedule-B include all lead and lift irrespective of distance and height. No extra charges will be paid for additional lead and lift.

If Nigama wishes to engage third party inspecting agency for the said work, apart from the Quality Control authorities and field tests of the Nigama and Contractor, then the contractor should co-operate with the third party test and Quality Control authorities.

Any necessary documents can be uploaded in spaces provided for general documents in upload document section.

In addition to the above, all the conditions, as stipulated in the bid document uploaded should be followed.

The defect liability period for this work is as indicated in tender document

Sub leasing/ GPA of work prohibited

Department is not responsible for Typological error.

The successful bidder whose tender is approved, should fulfill all the conditions stipulated in tender document and enter into agreement with Nigama in stipulated time.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents pertaining to this work

The contractors assessed available tender capacity will be calculated as per the clause 3.1 of STD tender document Attached

Equipments like Hydraulic Excavators, required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

Further details and information, if any, required can be had from the Office of the Executive Engineer, D & I Division, CNNL, Bannur, Karnataka, on all working days during office hours

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹6,500

Important Dates

Last Activity

6 Aug 2026

Published

4 Aug 2026

Download Ends

4 Aug 2026

Clarification Period

4 Aug 2026

BOQ Preview

•

improvements of VC Canal off take gate control electrical system of kanaganamaradi

•

Pole Mounted Fibre Glass Reinforced Aerial Fuse Board 60 Amps - 3 Way complete the work as directed by engineer incharge

•

Fixing Pole Fuse Board Complete the work as directed by engineer in charge

•

Fixing PVC pipe for taking the leads form the conductor to the Pole fuse board (including taking the lead wire inside the PVC pipe & giving connection to the overhead line & Pole fuse box/Aerial fuse ...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975, 50 Sqm...

•

Compression type Aluminium Tubular in Line Connector for Aluminum Conductor 16 Sqmm Complete the work as directed by engineer in charge

•

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm Complete the work as directed by engineer in charge

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Making and Fixing pot head for LT Cable only Heat shrinkable Type Terminations 35 to 95 Sqmm Complete the work as directed by engineer in charge

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm Complete the work as directed by enginee...

•

Supplying &fixing of Porcelain fuse channel withcut out on existing wooden/panel using necessary nuts, bolts and washers.32 A Complete the work as directed by engineer in charge

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

Supplying of on load change over switches 4 poles,AC 23ADuty, 415V, 50Hz,ACSupply. Withall accessories. (SM Enclosure Sheet Metal Execution Complete the work as directed by engineer in charge

•

Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...

•

Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities Complete the work as directed by engineer in charge

•

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor Complete the w...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board Complete the work as directed by engineer in charge

•

Supplying, fixing and wiring 0 to 30A Direct Reading AC analog type Ammeter Complete the work as directed by engineer in charge

•

Supplying, fixing and wiring rotary selector switch suitable for Ammeter Complete the work as directed by engineer in charge

•

Supplying, fixing and wiring rotary selector switch suitable for Voltmete Complete the work as directed by engineer in charge

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C Complete the work as directed by engineer in charge

•

Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs,Machine/NF...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A SP Switch Complete the work as directed by engineer in charge

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Three Way 5 Pin Socket Complete the work as directed by engineer in charge

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder Complete the work as directed by engineer in charge

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...

•

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires Complete the work as directed by eng...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

4719 kw-1 Call-2.doc

Tender Document • 3.02 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Irrigation and Other Works

Improvements of VC Canal off take gate control electrical system of kanaganamaradi

Cauvery Neeravari Nigam Limited

CNNL D and I Div Bannur | Mysuru, Karnataka

Amount: ₹2.5 LCloses: 6 Aug 20264 Aug 2026Closed

Timeline

Published4 Aug 2026
Closed6 Aug 20264 Aug 2026