REPAIR REPLACEMENT OF PLUMBING SANITARY FITTING AND CERTAIN JOINERY REPAIR WORK OF AGE B/R -I UNDER GE WEST BAREILLY

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

Brick work with fly ash bricks, straight or curved on plan 6m mean radious built in CM (1:6) etc as directed .

Demolition of cement concrete (un-reinforced) including terrazo of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition/Dismantling of breaking up drain pipes( AC or reinforced concrete )set in cement mortar for 100mm internal dia (and less) of pipes.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 600 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

S & F Non skid ceramic coloured tiles7 mm to 8mm thick (square /rectangular )area of each tiles exceeding 0.11sqm but n . Exc 0.18 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:4 .including dismantling floor, hearth or wall tiling including cement mortar bedding

All as above but as in vertical surfaces but CM 1:4 of 10 mm thick detto.

S & F for verified ceramic coloured tiles 10 mm (square /rectangular )area of each tiles not exceeding 0.36 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:4 .including dismantling floor, hearth or wall tiling including cement mortar bedding

All as above but as in vertical surfaces but CM 1:4 of 10 mm thick detto.

M&L for 50 mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection ,path,finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole etc all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any colour, shape and size conforming to IS_15658-2006 of 60mm thick, M-35 Grade with grey cement and pigment over a layer 100 mm thick PCC 1:4:8, type D-2 with using 40mm graded stone aggregate as in sub base of floors is laid over and including 25 mm thick sand cushioning of existing PCC surface all as specified and as directed by Engr-in-charge

S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed

S&F in repairs 25 mm dia MS fancy type CP curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

Taking down cement plaster from wall / ceiling of any description including terrazzo skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc.all as specified and directed.

M & L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6) finished the surface even and smooth without using extra cement complete all as spd and directed

M & L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished the surface even and smooth without using extra cement complete all as spd and directed

M & L applying two coat of distemper oil emulsion white or tinted on new decorated or undecorated wall surfaces complete all as specified.

M&L for applying layer of birla wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width or aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as specified or as directed.

S & F in repairs GI wire mesh 0.48 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.50 sqm in each pane all as specified or as directed.

S & F in repairs sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.50 sqm in each pane all as specified or as directed.

S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F in repair vitreous china water closet (squatt pan) orissa pattern 580x 440 mm size pan white with front or back inlet with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including seat cover ,connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S & F urinal valve auto closing system with built in control cock & wall flange valve 15 mm bore including urinal sperader of CP complete all as specified and directed Make jaquar or equivalent Cat no PRS-077.

S & F vitreous china urinal half stall type colours excluding flushing cistern flush pipe and waste pipe.

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe.

S&F 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

S&F CI floor traps with grating complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete type B1 1:2:4.

S & F in repairs 100 mm cast iron sanitary connection socket to fit WC out let.

S&F in repair fancy type stop valve 15mm dia, chromium plate alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed all as specified or as directed. .

S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts.

S&F fancy Bib tap 15mm dia cast copper alloy chromium plated with crutch or buter fly handle screwed down (Pressed for iron pipe) fixed in repairs

S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & floor ,jointed with solvent cement.

All as above but 75mm dia pipe

S & F spun pipes iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified

M & L 75 mm dia cost Iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) as in repairs

S&F 100mm bore CI soil waste / vent pipe (spun type) in any length with or without ears with cement joint to wall with stack clamps out of 110mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof etc.all as specified including black japan paints Make neco

S&F 75 mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door

S&F CI 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door

S&F 100mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door

S&F CI 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door

S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if required, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed

S & F stainless steel plate rack of size 31 " x 36 " x 10" in rrepair complete all as specified and as dirrected (Model : KPR -315 of M/S Blue Star or equivalent make- of M/S Jain Brothers sanitation Pvt Ltd Brand -Jayna)

S&F rotational moulded polythene water storage tanksin triple layers white colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed Make : Sintex pure,Vectus safe and supreme

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed Make : Sintex pure,Vectus safe and supreme

S&F in repairs, 15 mm dia Ball valves high pressure of PTMT witth epoxy coated Aluminium rod& high-density plastic ball srewed for iron pipe and fixed (minimum weight 15mm-142gms/20mm-210gms/ Make Supreme/Tuff

Cutting holes into bricks walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required, depth of hold fast exceeding half brick and not exceeding one brick all as spd and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as spd and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed

Taking down shutter of any description n/exc 1 sqm each incl removing from the premises complete all as spd and directed

Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as spd and directed

M&L for 2nd class hard wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints and any numbers of rebate all as spd and directed

M&L providing "RAJSHRI" BRAND FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge

M&L in providing 30 mm thick RAJSRI brand factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per spacification and drawing all as spd and directed

S & F factory made solid pannel PVC door shutter 30mm thick style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm wide struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gap insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification and drawingshown in SSR Pt -ll (rate ) - 2010.

S&F 30mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for window/ventilators divided into squares with plain chamfered mitred & rebated sash bars edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.24 (b) all as spd and directed

S&F 35mm thick 2nd class hard wood shutter for door glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for window/ventilators divided into squares with plain chamfered mitred & rebated sash bars edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.24 (b) all as spd and directed

S&F factory made 30mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F factory made 25mm thick flush shutter solid core construction with block board core and plywood face panels ,cupboards ,shelves , drawers , pelmet boxes etc all as spd and directed.

S&F Factory made steel window /ventilator side hung shutters including box type hinges with Z section steel handle, 2 Nos 100mm MS tower bolt on each shutter and MS CP hook and eye stay, complete with glazing bars dovetailed or welded all as spd and directed.

All as per item no 82 above but without glazing bars ditto.

S&F framed work such as grills, gratings, etc..with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290. Gde-E-165

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as spd and directed

S&f in repair floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring, 140mm long complete all as spd and directed.

S&F in repairs cast iron body door closer hydrocally regulated designation No. 1 universal type for door shutters up to 700 mm in width and of weight not more than 35Kg and fixed all as spd and directed

S&F 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F 100mm long stainless steel but hinges for PVC door

S&F 75mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description and applying two coat of synthetic enamel paintover one coat of pink primer complete all as spd and directed by Engr-in-Charge

M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed

Taking down hood covers of rolling shutters of area not exceeding 6 sqm loose brackets plates or guide properly greasing helical spring,shafts, and guide, channel for proper functioning of rolling shutter of any size and refixing covers in position after repairs complete all as specified and directed.

Taking down aaluminiun door shutters ans refixing after necessary repairs, greesing etc to made the shutters functional, including all minor items like screw, rivet, washers, aluminium beads complete all as specified and directed.

JAI SRI RAM ASSOCIATE

multiple alliance enterprises

M/S Alam Construction Co

hardeep singh enterprises

REHAN CONSTRUCTION

A K builders

novell engineers

SHRI BALA JI STORE

M/S YASHCON CONSTRUCTIONS