State Plan Scheme 2021-22 (Balance Work)- Additional work of construction of Control Room building, Idukki

Amount

CIVIL WORKS

OD29716/2023-2024: Site levelling by using JCB

4.1.8: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

50.6.2.2: Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1: 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

16.91.1: Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

OD30003/2023-2024: Supplying and fixing of Table tops made of 25mm thick edge banded & prelaminated particle board with 18mm thick edge banded verticals. Top & bottom tile: Laminated board., Knock down fitting, Modestry panel, level adjustor, Visible edges are lipped with 2mm PVC edge band and other egde with .5mm edge band ,One Drawer unit , One cupboard unit and side almarah unit (60x45x135mm size) ,Keyboard tray ABS ket board tray mounted on sliders, CPU Stand _ Powder coated CPU stand on castors incluing Hardware like handle, lock & Key,minifix, podwer coated chipboard screws, pvc right angle block, SS support, level adjusters etc. are provided wherever required. etc modular partitions dividers between adjacent linear work stations 75mm width 80 microns powder coated CRCA partitions with pre punched cutouts to run electric & networking cables. Duel Race ways with punch out to fix electrical and data modules for power & data at skirting level & just below table top, writing board(White Board), pin up board(Soft Board). Partitons are covered with 9mm tiles(prelaminated particle board/MDF/Fabric Cladded Board) as required by using sliding panel method,Level adjusters and all the visible edges are covered with curved Aluminum trims. all cost and conveyance of all materials & labour charges etc complete MR

OD30026/2023-2024: Supplying and fixing of executive table, Table tops made of 25mm thick edge banded & prelaminated particle board with 18mm thick edge banded verticals. Top & bottom tile: Laminated board., Knock down fitting, Modestry panel, level adjustor, Visible edges are lipped with 2mm PVC edge band and other egde with 0.5mm edge band , Drawer unit , cupboard unit and side almarah unit ( 60x45x135mm size) ,Keyboard tray ABS ket board tray mounted on sliders, CPU Stand _ Powder coated CPU stand on castors incluing Hardware like handle, lock & Key, minifix, podwer coated chipboard screws, pvc right angle block, SS support, level adjusters etc. are provided wherever required. all cost and conveyance of all materials & labour charges etc complete

50.18.7.5.2: Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall

50.18.8.4.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2

18.48: Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

18.62.4: Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P / H.P.H.D plastic ball.40 mm nominal bore, 206 mm long, weighing not less than 690 gm:

ELECTRICAL WORKS

1.14.6: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 16 sq. mm + 1 X 6 sq. mm earth wire

1.17.3: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.29: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 6 sq. mm

1.18.2: Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair

1.21.1: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.24.4: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.1: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.28.1: Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.4: Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

1.53.1: Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

90.10.3.15: Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

90.10.1.2: Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant) 2 module moulded plastic box on surface

90.10.1.5: Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )6 module moulded plastic box on surface

90.6.5.11: Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.10.3.22: Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )6A 3 pin plug top

OD28937/2023-2024: supply and fixing of 400mm sweep wall fan with all accessories and giving proper connections as required. make crompton or equivalent

OD28938/2023-2024: Supply and fixing of CAT6 patch cord 2 mtr. make- dlink or equivalent

OD28947/2023-2024: Supply and fixing of CAT6 I/O socket in the existing suitable modular plate and suitable gi box ,giving proper connection as required

OD28939/2023-2024: Supply and fixing of 12W led die cast aluminium housing bulk head IP65 with 1000 Lumens all accessories ,electrical connections.including fixing materials required. make-philips/wipro/havells/luker(LBKOVSL04) or equivalent

5.6: Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD30040/2023-2024: supply and fixing of 1 inch pvc case and cape with all accessories and giving proper clamping etc as required .make precision or equivalent

OD28649/2023-2024: Supply and fixing of Universal clamp made of SS to connect rod with flat conductor ( OBO Type No. 14 25 RTC) or equivalent

OD28650/2023-2024: Supply and fixing of Interception tip 120 A .make obo or equivalent

OD28651/2023-2024: Supply and fixing of Holding base for polyamide conductor holder OBO Type: 194 or equivalent

OD28652/2023-2024: Supply and fixing of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance OBO Type No. 177 30 M8 (5207460 ) or equivalent

OD28653/2023-2024: Supply and laying of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) , OBO Type No. RD 8/ALU (5450086) or equivalent

OD28660/2023-2024: Providing and fixing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. OBO Type No.35650 or equivalent

OD28661/2023-2024: supply and fixing of Spacer clip for flat conductor, with polyamide base OBO Type 833 35 With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel

OD28662/2023-2024: Providing and fixing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate.OBO Type No. 255 FL30 FT or equivalent

OD28663/2023-2024: Supply and laying of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor shall be of Hot Dipped & Cross sectional area of 90mm square According to DIN EN 50164-2 (VDE 0185 part 202) Meets the requirement of VDE0185/305(IS-IEC 62305) Zinc coating: 500 g/m square (Approx:70 micron coating) Should be tested and used exclusively for lightning protection earthing system and ring equipotential bonding. OBO Type No. 5052 DIN 30X3 or equivalent

OD28664/2023-2024: supply and fixing of T160 Junction Box IP66 enclousre ,IK05,UV resistants 190x150x77

OD28665/2023-2024: Supply and fixing of Test Joint suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer OBO Type No. 252 8-10XFL30 or equivalent

OD28666/2023-2024: Providing and fixing of cross universal connector for T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts. OBO Type No.251 8-10 or equivalent

OD28667/2023-2024: Supply and fixing of Fang Fix with base and clamp, on the top air terminal is erected. Fang fix clamp made of SS, lightning tested for 100 KA 10/350 micro sec waveform. F-FIX-16

OD28668/2023-2024: Supplying and fixing of Vertical air terminal with accessories like Air terminals as per IS-IEC -62305 part-3 16mm rod tapered to 10 mm aluminium rod :Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IS/IEC 62305) 3Mtr Airterminal: semi-hard (EAlMgSiO5 corresponds to DIN48801) Suitable for high wind load. OBO Type No. 101VL3000 or equivalent

OD28723/2023-2024: Supplying testing and commissioning of OBO Bettermann or equivalent Make Class C SPD, V20-3+NPE for three phase protection.Sub DB level.

OD28724/2023-2024: Supplying testing and commissioning of OBO Bettermann or equivalent Make V 50 - 3 + NPE - 320 V, Class B+C SPD for three phase power line protection. At Main DB / MSB

OD28929/2023-2024: Supply and fixing of OBO Bettermann or equivalent Make Class C SPD, V20- 1+NPE., for Single phase protection.Sub DB level. (UPS DB)

OD28726/2023-2024: Supply and fixing of 12V /75 AH 6EL Tubular Batteries for 2 Hours backup in 7KVA load make exide or equivalent

OD30059/2023-2024: supply and fixing of 2ton inverter type 3star split air conditioner with stabilizer ,stand and all accessories,giving proper connections as required. make bluestar, voltas or equivalent

OD28727/2023-2024: supply testing and commissioning of Vertiv Liebert (Emerson) or equivalent Make ITA2 model 10KVA/10KW-240VDC 3/1 True Online Double Conversion Pure Sine Wave UPS System With Battery Rack & Accessories.

OD28654/2023-2024: Supply and fixing of 0,5hp submersible motor (VOSKH16) with starter and all accessories for giving proper connections etc complete as required.

ANISH SEBASTIAN

Bidder Name

SHINE T JOSEPH (ABEL CONSTRUCTIONS)

ANISH SEBASTIAN