Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹21.7 L+₹38,943 (1.83%)Rejected-AOC | L2 | Rejected-AOC Reject | |
| 3 | L3₹22.2 L+₹87,273 (4.09%)Rejected-AOC INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L3 | Rejected-AOC Reject | |
| 4 | L4₹22.4 L+₹1.1 L (4.93%)Rejected-AOC | L4 | Rejected-AOC Reject |
Tender Value
₹22.9 L
EMD Value
₹45,800
Closing Date
20 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
ADDN/ALTN/MODIFICATIONS TO GF OF BLDG P116 AT ZONE A AHMEDABAD
2022_MES_565975_1
8299/E8
Open Tender
Civil Works
Works
210 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹45,800
Yes
24 Mar 2023
29 Nov 2022
22 Dec 2022
29 Nov 2022
20 Dec 2022
6 Dec 2022
29 Nov 2022 - 6 Dec 2022
Amount
Demolition of brick work built in CM including all quions, arches, pillars etc complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete.
Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Soft/loose soil complete.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete.
M&L Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete.
M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete
M&L for providing cement concrete 1:2:4 (Nominal Mix) type B-1, using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bed plates etc complete
M&L for RCC type B1 1:2:4(20mm graded aggregate) for Beams, cantilevers,bressummers, lintels bends complete.
Supply only Integral waterproofing compound complete.
M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.
M&L brick work with sub class "B"brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1.4 exc 6m mean radius complete .
M&L for Cutting chases, pinning in Brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps/jambs/pillars/ window cills/ cooking platforms etc and set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
M&L for Use & waste for Formwork to sides of pillars, posts, struts, piers, columns and stanchions to rough finished surfaces complete.
M&L for Use & waste for formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc to rough finisged surfaces complete.
M&L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete.
S&F for factory made 30mm thick flush shutter, Solid core, construction with solid board core and plywood face panels commercial type on both sides complete.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete.
M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.
M&L for Factory made Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete .
S&F 200mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S&F Stainless Steel butt hinges 100mm size medium weight cold rolled mild steel complete
S&F 300mm long aluminium alloy anodised sliding door bolts complete.
S&F 150mm extruded aluminium alloy handles fabricated type anodised complete.
S&F in repair 25mm dia CP Harrison curtain rod with brackets and knobs at ends complete.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete
S&F framed work such as grills, gratings, etc.with ends of bars, door frame, shouldered and/or riveted, framed for ceiling; ladders; railings; framework of water tanks and similar work conforming to Fe-290 (Gde E- 165) complete.
M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete
M&L Rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connectiong plates complete including cutting, grinding, welding etc Fe-290 (Gde E-165) as required complete..
M&L Rolled steel sections as in Plate girder or single stanchions,built up of one beam or channel section with flange plates, caps,bases. splices, angle brackets, cleats and other connectionsetc Fe-290 (Gde E-165) as required complete..
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings of Fe-290 (Gde E-165) (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete.
S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete.
S&F powder coated anodised Aluminium alloy sections 3 track sliding shutters windows with frames Series-B (18 mm) and duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.
S&F aluminium anodised section size 38 x 38 x 2mm for partition wall including gasket aluminium cleat 6 mm dia rounded bars, 5mm thick tinted glass panes top and 6mm thick ACP panel board at bottoms duly fitted with neoprene beading, glazing clips, etc. complete.
S&F powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing, anodized aluminium beading, screws, anodized aluminium fittings such as floor spring with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm, mortice lock, 5mm thick tinted glass & preleminated particle board panel and making good of wall surface to match existing surface complete
S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , including Ridge fixed with self tapping screws complete.
S&F in repairs 18mm thick high density PVC foam board shutter, prelaminated both side with decorative choice lamination including required beading & fixed with nails / screws to frame works as in cabinets cupboards shutter etc complete.
M&L for machine cut kota stone as in flooring, stair case landing. treads of steps etc, 20-25mm thick over & including 5mm thick in cement mortar 1:6 screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for machine cut Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over & including 15mm thk in 1:4 cement screed bed or bedding layer and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L PCC 1:3:6 type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and smooth without using extra cement, as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr complete.
M&L for cement concrete type D-2, 1:4:8 (40 mm graded agg.) 75 mm thick as sub base in foundation complete.
M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM 1:4 complete
M&L for Non skid ceramic (colored) 7 to 8 mm thick as in floor area of each tile exceeding 0.06 Sqm but n exceeding 0 .11 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors complete.
M&L for Non skid ceramic (colored) 7 to 8 mm thick as in floor area of each tile exceeding 0.18 Sqm but n exceeding 0 .38 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors complete.
M&L for Non skid ceramic (colored) 7 to 8 mm thick as in floor area of each tile exceeding 0.18 Sqm but n exceeding 0 .38 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 complete.
Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc and disposing off the area complete.
M&L for Rendering in two layers on other than fair faces of brick work or concrete surfaces 5 mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement over 10 mm thick rendering in CM 1:6 finished even and smooth without using extra cement complete. (WPC measured and paid separately)
M&L, for Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 is to be finished even & smooth (without using extra cement) complete.
M&L for 10 mm thick rendering on cement concrete as in ceiling with cement mortar 1:3 to be finished even & smooth (without using extra cement) complete.
M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls.
M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over a coat of 1 to 2mm (1.5mm average) thick wall care putty and one coat of alkali resistant primer complete.
M&L for preparation of new surfaces of ceiling plastered and applying three coat of white wash complete
M&L for complete removal of existing treatment and applying two coats of oil bound distemper with 1.5mm average thk wall care putty and priming plastered and other surfaces with alkali resistant priming paint walls complete
M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete.
M&L for prepration of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.
Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site complete.
Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site complete.
S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete.
S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete.
Dismantling water tanks and removing to store exceeding 500 ltrs and n exc 1000 ltrs complete.
S&F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc complete.
S&F in repair CP bib taps cast copper alloy fancy type with cruth or butterly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete.
S&F in repair Pillar taps, fancy type cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed15 mm dia bore pipe complete
S&F in repair Angle valve / Stop valves fancy type cast copper alloy with capstan head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe (conceled type) complete.
S&F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete.
S&F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete.
S&F in repair PVC connections 600 mm long, 15 mm size with PTMT nuts complete.
S&F in repair PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F in repair PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F PVC (SWR) bends any radius, 75 mm bore complete.
S&F PVC (SWR) bends any radius, 110 mm bore complete.
S&F PVC (SWR) vent cowl, 110 mm dia complete.
S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete.
S&F vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete.
S&F in repair 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handle including brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete.
S&F in repairs 15mm bore, fancy type Chromium plated shower roses with or without swivel joints, any size including fixing to steel pipe or union complete.
S&F vitreous china water closet Squatting Orissa pattern white size 580 x 440mm with integral foot rest with P or S trap incl connection to trap and to flushing pipe, anti-syphonage pipe, trap set in etc. and provn of PCC 1:5:10 concrete with making good to floor etc complete.
S&F PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete.
S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400m excluding taps, chain & plug & porcelain stopper but including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete.
S&F for soap dish stainless steel glossy finish & similar to cat BA 15S of prayag make type fixed with screws complete. .
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete.
Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm with 3 mm thick phenolic laminated white sheet cover for mounting of Piano Type switches, sockets, fan regulators for One light / Exhaust fan point controlled by one switch complete
All as per Item No 98 above but for One fan point controlled by one switch.
All as per Item No 98 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 98 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 98 above but for one 16 amp socket outlet modular type for controlled by one switch on independent board with conductor cable 2.5 sqmm complete.
S&F switch piano flush button single pole one way 6 amp complete.
S&F switch piano flush button single pole one way 16 amp complete.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.
S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.
M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete.
S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete.
S&F LED fixtures 8 watt including connection aving a nominal system lumen output of 1100 lumens at a minimum system efficacy of 100+ lumens per watt and it should have a color temperature of 6500K, CRI>80, THD < 10% ,PF > 0.95 and surge protection upto 4 kV complete.
S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.
S&F MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete
S&F MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete
Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and deposit to MES store complete.
S&F 20W LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " complete.
S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louvers shutter complete.
S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete.
S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230 volts, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete
Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.
Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.
Shreeganesh Construction
DMA PROJECTS
GIRNAR CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .