Building work

No. Figure Amount

Civil works items

1 Excavation for foundation upto 1.50 mt depth including sorting out and 1330.00 Cum 117.08

stacking of useful materials and disposing the excavated stuff for all lead and

lift for all sorts of soil.

2 Excavation for foundation from 1.50 mt to 3.00 mt. depth including sorting out 567.00 Cum 162.38

and stacking of useful materials and disposing the excavated stuff with all lead

and lift for all sorts of soil.

3 Excavation for foundation from 3.00 mt to 5.00 mt. depth including sorting out 154.00 Cum 285.73

and stacking of useful materials and disposing the excavated stuff with all lead

and lift for Hard murrum.

4 Excavation for foundation from 5.00 mt to 6.00 mt. depth including sorting out 11.00 Cum 314.77

and stacking of useful materials and disposing the excavated stuff with all lead

and lift for Hard murrum.

5 Filling in foundation and plinth with sand in layers of 20 cm thickness including 149.00 Cum 460.19

watering, ramming and consolidating etc. complete.

6 Filling available excavated earth (excluding rock) in trenches plinth side of 713.00 Cum 130.39

foundation etc. in layer not exceeding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete.

7 Carrying out plinth treatment to post construction / existing structure by 610.00 Sq.m. 34.36

spraying chemical solution for termite control treatment including labour and

material consistent with ISI specifications. Using chlordene and Chiorpurfiles

20 EC. As per 6131_paret-II concentration weight one percent is

recommended i.e. one litre 20 EC chemical emulsion with 19 litre give 1%

concentration inclusive of one litre chemical emulsion application at the rate of

5 litre chemical / Sq.m. of surface is recommended as per I.S.

8 Providing and laying controlled cement concrete M-150 and curing complete 68.00 Cum 3671.79

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Foundations, footings base of columns & mass

9 Providing and laying controlled cement concrete M-250 and curing complete 172.00 Cum 4337.95

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Foundations, footings base of columns & mass

10 Providing and laying controlled cement concrete M-250 and curing complete 30.00 Cum 7261.90

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns upto plinth level.

11 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 307.60 Cum 2965.76

crushed stone aggregates 40 mm. nominal size) and curing complete

excluding cost of form work in foundation and plinth.

12 Providing and laying controlled cement concrete M-200 and curing complete 39.90 Cum 7198.27

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Columns for Ground floor.

13 Providing and laying controlled cement concrete M-200 and curing complete 38.00 Cum 7236.35

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Columns for First floor.

14 Providing and laying controlled cement concrete M-200 and curing complete 16.00 Cum 7274.42

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Columns for Second floor.

15 Providing and laying controlled cement concrete M-250 and curing complete 93.10 Cum 5459.05

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Plinth beams.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

16 Providing and laying controlled cement concrete M-150 and curing complete 84.00 Cum 3765.28

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Plinth slab.

17 Providing and laying controlled cement concrete M-200 and curing complete 80.00 Cum 5827.70

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Beams for Ground floor.

18 Providing and laying controlled cement concrete M-200 and curing complete 76.00 Cum 5865.78

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Beams for First floor.

19 Providing and laying controlled cement concrete M-200 and curing complete 7.00 Cum 5903.85

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Beams for Second floor.

20 Providing and laying controlled cement concrete M-200 and curing complete 3.60 Cum 7297.25

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Lintels for Ground floor.

21 Providing and laying controlled cement concrete M-200 and curing complete 3.00 Cum 7335.33

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Lintels for First floor.

22 Providing and laying controlled cement concrete M-200 and curing complete 8.40 Cum 8056.77

including the cost of form work and finishing smooth surface with cement

mortar 1:3 (1 cement : 3 coarse sand) but excluding cost of reinforcement for

reinforced concrete work in Chhajja for Ground floor.

23 Providing and laying controlled cement concrete M-200 and curing complete 8.00 Cum 8094.85

including the cost of form work and finishing smooth surface with cement

mortar 1:3 (1 cement : 3 coarse sand) but excluding cost of reinforcement for

reinforced concrete work in Chhajja for First floor.

24 Providing and laying controlled cement concrete M-200 and curing complete 1.00 Cum 8132.92

including the cost of form work and finishing smooth surface with cement

mortar 1:3 (1 cement : 3 coarse sand) but excluding cost of reinforcement for

reinforced concrete work in Chhajja for Second floor.

25 Providing and laying controlled cement concrete M-200 and curing complete 95.50 Cum 5965.06

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Slab for Ground floor.

26 Providing and laying controlled cement concrete M-200 and curing complete 80.00 Cum 6003.14

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Slab for First floor.

27 Providing and laying controlled cement concrete M-200 and curing complete 6.00 Cum 6041.21

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Slab for Second floor.

28 Providing and laying controlled cement concrete M-200 and curing complete 5.00 Cum 6687.21

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Staircases for Ground floor.

29 Providing and laying controlled cement concrete M-200 and curing complete 5.00 Cum 6725.29

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Staircases for First floor.

30 Providing I.S.I. Mark Fe-500D T.M.T. bar reinforcement for R.C.C. work 118080.00 Kg. 77.63

including bending, binding and placing in position complete upto all floor level

for all floors.

31 Providing and laying brick work using common burnt clay building conventional 263.00 Cum 4021.02

type bricks having crushing strength not less than 35 Kg./Sq.cm. in foundation

and plinth in cement mortar 1:6 (1 cement : 6 fine sand) including the cost of

all materials and labour charges etc. complete.

32 Providing and laying brick work using common burnt clay building conventional 211.20 Cum 4289.33

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above plinth level upto floor two level in cement mortar 1:6 (1 cement

: 6 fine sand) for Ground Floor including the cost of all materials and labour

charges etc. complete.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

33 Providing and laying brick work using common burnt clay building conventional 90.00 Cum 4328.27

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above plinth level upto floor two level in cement mortar 1:6 (1 cement

: 6 fine sand) for First Floor including the cost of all materials and labour

charges etc. complete.

34 Providing and laying brick work using common burnt clay building conventional 48.00 Cum 4367.22

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above plinth level upto floor two level in cement mortar 1:6 (1 cement

: 6 fine sand) for Second Floor including the cost of all materials and labour

charges etc. complete.

35 Providing and laying half brick work using common burnt clay building 154.00 Sq.m. 599.84

conventional type bricks having crushing strength not less than 35 Kg/Sq.cm in

cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth

including the cost of all materials and labour charges etc. complete.

36 Providing and laying half brick work using common burnt clay building 259.00 Sq.m. 651.67

conventional type bricks having crushing strength not less than 35 Kg/Sq.cm in

cement mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth

level for Ground floor including the cost of all materials and labour charges etc.

37 Providing and laying half brick work using common burnt clay building 319.00 Sq.m. 657.67

conventional type bricks having crushing strength not less than 35 Kg/Sq.cm in

cement mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth

level for First floor including the cost of all materials and labour charges etc.

38 Providing and laying half brick work using common burnt clay building 27.00 Sq.m. 663.67

conventional type bricks having crushing strength not less than 35 Kg/Sq.cm in

cement mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth

level for Second floor including the cost of all materials and labour charges

etc. complete.

39 Providing and fixing 50mm thick Double shutter doors made from 5 x 10mm 20.00 Sq.m. 4212.71

hollow box type frame made out from 12 mm thick water proof plywood and

mm thick lamination over it on both sides, colour, pattern and design is to be

approved by the Architect with stainless steel handle size 60 cm long, tower

bolt size 25mm, heavy duty floor spring & heavy stainless steel Aldrop as per

detail for all floors.

40 Providing and fixing door having side hung single shutter having factory 100.10 Sq.m. 3664.28

fabricated standard extruded alluminium colour anodized hollow section

(Section 63.50mm x 38mm x 2.50mm thick) for door frame, hollow portion of

door frame shall be filled with non teakwood wood, with factory made 35mm

thick flush door both side pre laminated with 6 lever Mortice lock (Godrej or

equivalent), Door closers (Heavy type of 765 number) Hardwar of Everite

Prabhat or equivalent, SS Aldrop, SS handle size 15cm long, tower bolt size

20 cm etc. as per detail colour & pattern approved by this office including

necessary anodized alluminium fixtures and fastenings for all floors.

41 Providing and fixing FRP frame size 100 x 50 mm and 28 mm thick FRP 33.00 Sq.m. 2377.76

shutter with depressed panel shutter having extra reinforcement on sides and

edges and in gel coat finish. The core of the shutter & frame is to be filled up

with injected fiber extinguishing grade polyurethane foam done in situ along

with embedded wooden pieces for stiffening and also for taking hinges and

fixtures. The whole FRP frame and shutter is to be water proof, weather proof,

termite proof and resistance to mild acid / alkali resistance including S.S.

hinges with necessary screws and aluminum fixtures and fastening for all

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

42 Providing and fixing window having extruded aluminum colour anodized 144.90 Sq.m. 1713.70

section frame main outer size 63.50 x 38.10 x 1.95 mm (@ Wt 1.094 Kg /

Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm (@

wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm

(@ wt.of 0.659 Kg/mt) with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (@ wt. of 0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29mm (@ wt. of 0.456 Kg/mt. & @ Wt. 0.457 Kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc. complete for window.

43 Providing and fixing window having extruded aluminum colour anodized 87.00 Sq.m. 1583.95

section frame main outer size 95mm x 24mm x 1.17mm (@ wt. of

Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (@

Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (@ Wt.

1.06 Kg/mt) with sliding shutters of horizontal member size 40 mm x 18mm x

1.29mm (@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x

mm (@ wt. of 0.456 Kg/mt.) with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc. complete for all floors.

44 Providing & fixing colour anodized Alluminium sectional ventilators using 12.00 Sq.m. 1898.80

section 50.80 x 25.40 {Section Wt 0.791 Kg /Rmt.} 3mm thick Bajari figured

glass adjustable glass louvers fixed in alluminum channel and including

anodized aluminum fixtures and fastenings and hold fasting with coach bolts

etc. complete. (Colour as directed by Engineer in charge except black and

Alluminium section shall be of approved brand as directed by Engineer in

45 Providing & fixing colour anodized Alluminium sectional fixed glass windows 27.00 Sq.m. 1265.53

using section 50.80 x 25.40 {Section Wt 0.772 Kg /Rmt. for one size groove

and 0.760 Kg/Rmt. both side groove} fully glazed 5mm thick transparent glass

and 0.8mm thick alluminium glazing clips and rubber bedding and including

anodized aluminum fixtures and fastenings and hold fasting with coach bolts

etc. complete. (Colour as directed by Engineer in charge except black and

Alluminium section and glass shall be of approved brand as directed by

Engineer in charge)

46 Providing and fixing Safety Grills of required pattern for windows / door using 6110.00 Kg. 108.78

16mm dia. M.S. polished bars and rectangular CRC pipes of size 50mm x

30mm x 2mm at required spacing as per design and hold fast with coach bolts

including one coat of primer and two coats of matt finished oil painting etc.

47 Providing and laying river finished Granite stone slab 18mm (average) thick, 108.00 Sq.m. 3202.71

machine cut, free edges polished (single piece not more than 150 cm) as per

design including half round front edge & 1 cm nosing & necessary groove on

tread of steps laid on 20 mm thick cement mortar 1:6 (1 cement : 6 coarse

sand) jointed with grey cement slurry including rubbing and polishing etc.

48 Providing and laying 60 cm x 60 cm Vitrified tiles 8mm thick flooring of 532.00 Sq.m. 1415.77

approved brand, over 20mm (average) base of cement mortar 1:6 (1 cement :

6 coarse sand) on new surface or fixing on existing flooring by adhesive

materials including dismantling of existing flooring and jointed with colour

cement slurry including finished with flush pointing and cleaning the surface

etc. complete. (Light shade & 10% Dark shade pattern as directed)

49 Providing and laying 60 cm x 60 cm matt (GVT) Vitrified tiles 8mm thick 332.00 Sq.m. 1397.83

flooring of approved brand, over 20mm (average) base of cement mortar 1:6

(1 cement : 6 coarse sand) on new or fixing on existing flooring by adhesive

materials including dismantling of existing flooring and jointed with colour

cement slurry including finished with flush pointing and cleaning the surface

etc. complete. (in two colour, Shade and pattern as directed)

50 Providing and laying 60 cm x 60 cm Vitrified tiles 8mm thick flooring of 39.00 Sq.m. 1415.77

approved brand, over 20mm (average) base of cement mortar 1:6 (1 cement :

6 coarse sand) on new surface or fixing on existing flooring by adhesive

materials including dismantling of existing flooring and jointed with colour

cement slurry including finished with flush pointing and cleaning the surface

etc. complete. (Shade and pattern as directed)

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

51 Providing and laying 30 cm x 30 cm Vitrified tiles 8mm thick flooring of 46.00 Sq.m. 1415.77

approved brand, over 20mm (average) base of cement mortar 1:6 (1 cement :

6 coarse sand) on new surface or fixing on existing flooring by adhesive

materials including dismantling of existing flooring and jointed with colour

cement slurry including finished with flush pointing and cleaning the surface

etc. complete. (Shade and pattern as directed)

52 Providing and laying Vitrified granite tiles (Matched with flooring) 8mm thick of 48.00 Sq.m. 1141.45

approved brand, in skirting, risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) pointing in white cement and jointed

with white cement slurry.

53 Providing and laying 30cm x 60cm size Vitrified granite tiles (Matched with 124.00 Sq.m. 1141.45

flooring) 8mm thick of approved brand, in skirting, risers of steps and dedo on

10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) pointing in white

cement and jointed with white cement slurry.

54 Providing and laying ceramic tiles 30cm x 60cm size & 6mm thick of approved 187.00 Sq.m. 995.81

brand, in skirting, risers of steps and dedo on 10mm thick cement plaster 1:3

(1 cement : 3 coarse sand) pointing in white cement and jointed with white

cement slurry.

55 Providing and fixing precast concrete kerb stone of grey cement based 328.00 Rmt. 361.64

concrete block 30 cm length, 30 cm height and 15 cm thick of M-250 grade

concrete as per approved design and including excavation for fixing in proper

line and level, filling the joints with C.M. 1:3 (1 cement : 3 fine sand) etc.

56 Providing and fixing precast Rubber dye / steel dye inter locking concrete block 754.00 Sq.m. 685.42

60mm thick with grade of concrete M-300 pneumatic compressed / vibrated

mechanically and as per approved design confirming to IS 15658 :

including 35 mm sand layer for levelling and filling the joint with sand in proper

line and level as per guidelines of IRC : SP 63-2018 etc. complete.

57 Providing and laying water proofing treatment with china mosaic tiles flooring 572.00 Sq.m. 1035.25

over avg 40 mm C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit 6 to 12 mm

size} bedding for maintaining slope for plain and curve surface & 12 mm to

mm of broken piece of ceramic / glazed tiles (one for more color as directed)

to be laid over cement mortar bedding of C.M. 1:3 (1 cement : 3 sand)

containing one Kg of water proofing materials per bag of O.P.C. at plain or /

and slops and to be tempered to bring mortar ceramic up to surface with using

white cement and colour pigment including rounding of junctions and

extending them up to 15 cm along the wall and curing with bends any patterns

or design as per drawing and cleaning by using oxalic acid etc. complete.

58 Providing and laying mirror polished black Granite stone slab 18 mm (average) 259.00 Sq.m. 3425.92

thick for stair steps and riser as per design including half round both edges

mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey

cement slurry including rubbing and polishing and providing necessary G.I.

fasteners etc. complete for Doors / Windows sill & jambs cladding.

59 Providing 15mm thick mala plaster in single coat on brick / concrete walls for 1504.00 Sq.m. 218.01

interior plastering finished even and smooth in cement mortar 1:3 (1 cement :

3 coarse sand) for Ground floor etc. complete.

60 Providing 15mm thick mala plaster in single coat on brick / concrete walls for 1280.00 Sq.m. 240.76

interior plastering finished even and smooth in cement mortar 1:3 (1 cement :

3 coarse sand) for First floor etc. complete.

61 Providing 15mm thick mala plaster in single coat on brick / concrete walls for 230.00 Sq.m. 263.52

interior plastering finished even and smooth in cement mortar 1:3 (1 cement :

3 coarse sand) for Second floor etc. complete.

62 Providing 10 mm thick cement plaster in single coat for plastering on Ceiling & 600.00 Sq.m. 164.97

soffits of stairs upto floor two level and finished even and smooth in cement

mortar 1:3 (1 cement : 3 sand) etc. complete for Ground floor.

63 Providing 10 mm thick cement plaster in single coat for plastering on Ceiling & 577.00 Sq.m. 187.73

soffits of stairs upto floor two level and finished even and smooth in cement

mortar 1:3 (1 cement : 3 sand) etc. complete for First floor.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

64 Providing 10 mm thick cement plaster in single coat for plastering on Ceiling & 27.00 Sq.m. 210.48

soffits of stairs upto floor two level and finished even and smooth in cement

mortar 1:3 (1 cement : 3 sand) etc. complete for Second floor.

65 Providing and fixing 12 mm wide groove in plaster including finishing the same 1020.00 Rmt. 15.15

etc. complete for all height.

66 Providing & fixing Chicken mesh jali with square of 12.50 x 12.50 mm of 25 310.00 Sq.m. 92.92

gauge at junction the brick masonary and reinforcement cement concrete

member including fixing materials, scaffolding, labour etc. complete.

67 Providing 20 mm thick cement plaster in single coat on bricks / concrete wall 153.00 Sq.m. 340.77

for interior plastering upto floor two level finished even and smooth cement

mortar 1:3 (1 cement : 3 sand) and mixing water proofing materials of

approved brand and manufacture in cement mortar in proportion

recommended by the manufacturer for all floors.

68 Applying two coats of acrylic lappy - putty & two coats of primer of approved 4151.00 Sq.m. 40.59

brand and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

69 Wall painting (two coats) with plastic emulsion paint of approved brand and 2960.00 Sq.m. 78.90

manufacture on wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth.

70 Wall painting (two coats) with plastic emulsion paint of approved brand and 1191.00 Sq.m. 84.16

manufacture on ceiling and sloping roofs to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

71 Providing 20 mm thick sand faced cement plaster on walls for upto heights 10 2021.00 Sq.m. 329.29

meters above ground level consisting of 12mm thick backing coat of cement

mortar 1:3 (1 cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1

cement : 1 sand) etc. complete & making groove as directed by Engineer in

72 Finishing wall with weather proof exterior emulsion paint on wall surface (two 2208.00 Sq.m. 114.53

coats) to give an required shape even shade after thoroughly brushing surface

to remove all dirt, dust and remains of loose powdered materials etc. complete.

73 Providing and fixing 110 cm high Stainless steel railing made from 28.00 Rmt. 2110.90

anticorrosive 304 grade S.S. pipe of 50 mm dia. (16 Gauge) as hand rail with

S.S. 304 grade Baluster of 38 mm dia. (16 Gauge) as a vertical support fixed

in RCC slab at 1.2m c/c including three horizontal S.S. pipes of 25 mm dia. (16

gauge) at equal distance fixed by 18.75 mm dia (16 gauge) S.S. pipe with

baluster including accessories as per detailed drawing as directed etc.

74 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. 60.00 Rmt. 72.65

U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer

in charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c or shall be concealed as directed including necessary fitting etc. including

testing of pipe and joints and fixing the same with adhesive solvent including

cost of all materials.

75 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. 60.00 Rmt. 91.84

U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer

in charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c or shall be concealed as directed including necessary fitting etc. including

testing of pipe and joints and fixing the same with adhesive solvent including

cost of all materials.

76 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. 30.00 Rmt. 148.12

U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer

in charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c or shall be concealed as directed including necessary fitting etc. including

testing of pipe and joints and fixing the same with adhesive solvent including

cost of all materials.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

77 Providing, laying and jointing in true line and level I.S.I. mark 50mm dia. 100.00 Rmt. 195.67

U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer

in charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c or shall be concealed as directed including necessary fitting etc. including

testing of pipe and joints and fixing the same with adhesive solvent including

cost of all materials.

78 Providing and fixing Heavy Handle valve of approved brand & following internal 10.00 No. 259.57

dia. of brass including fixing in pipe lines etc. complete (A) 15 mm dia.

79 Providing and fixing Heavy Handle valve of approved brand & following internal 8.00 No. 376.73

dia. of brass including fixing in pipe lines etc. complete (C) 25 mm dia.

80 Providing and fixing Heavy Handle valve of approved brand & following internal 2.00 No. 728.21

dia. of brass including fixing in pipe lines etc. complete (E) 40 mm dia.

81 Providing and fixing butterfly valves IS:13095 with I.S.I. mark PN 1.0 of 3.00 No. 2384.61

approved brand & following internal dia. of brass including fixing in pipe lines

etc. complete. (A) 50 mm dia.

82 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes 30.00 Rmt. 602.70

(Medium grade) of the following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor. (E) 40mm

83 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes 30.00 Rmt. 397.87

(Medium grade) of the following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor. (C) 25mm

84 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes 40.00 Rmt. 244.98

(Medium grade) of the following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor. (A) 15mm

85 Providing and fixing to wall, ceiling and floor 10.0 Kg.F/cm2 working pressure 40.00 Rmt. 277.43

polythene pipes of the following outside dia. low density, complete with special

flange compression type fittings, wall clips etc. including making good the wall,

ceiling and floor. (F) 75mm dia.

86 Providing, laying and jointing in true line and level I.S.I. mark 110mm diameter 147.00 Rmt. 835.15

U.P.V.C. SWR Type B pipe confirming to IS 13592 -1992 with one end plain

and other end socketed with rubbering & fitting confirming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110mm diameter x 149mm length x 145mm high at every

2000mm center to center or shall be concealed in wall as directed including

necessary fitting such as bends, shoes etc. including testing of pipe and joints

and jointed with adhesive solvent cement including cost of all materials.

87 Providing, laying and jointing in true line and level I.S.I. mark 160mm diameter 116.00 Rmt. 831.22

U.P.V.C. (Type B) confirming to IS 13592 -1992 with one end plain and other

end socketed with rubbering & fitting confirming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

160mm diameter x 210mm length x 196mm high at every 2000mm center to

center or shall be concealed in wall as directed including necessary fitting such

as bends, shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement including cost of all materials.

88 Providing and fixing PVC SWR Nahni trap IS-14735 for drain - 100 mm 24.00 No. 558.36

diameter with jali of the following nominal diameter of self cleaning design with

C.I. screwed down or hinged grating including the cost of cutting and making

good the walls.

89 Providing and fixing screw down quarter turn bib taps of following size (A) 19.00 No. 186.83

Brass chromium plated screw down bib tap (i) 15mm dia. as approved by

Engineer in charge for all floors.

90 Providing and fixing push type bib taps of following size (A) Brass chromium 8.00 No. 186.83

plated screw down bib tap (i) 15mm dia. as approved by Engineer in charge

for all floors.

91 Providing and fixing C.P. brass quarter turn pillar tap, capstan head screw 14.00 No. 308.73

down high pressure with screw, shanks and back nuts (A) 15mm dia. as

directed by Engineer in charge.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

92 Providing and fixing wash basin with pedestal of standard height with single 14.00 No. 2195.74

hole for C.P. pillar cock 15mm heavy duty swan neck, with C.I. or M.S.

brackets painted white including cutting holes and making good the same

including C.P. brass waste and waste pipes and bottle trap (A) Vitreous china

(ii) Flat Back washbasin 550 mm x 400mm size. (i) In colour.

93 Providing and fixing water closet squatting Orissa type W.C. pan size 580mm 7.00 No. 1419.05

integral footrest and 100 mm P or S trap and including 25 mm dia. C.P. brass

flush valve and G.I. inlet connection etc. comp. (A) Vitreous china long pattern

white or color as approved by Engineer in charge.

94 Providing and fixing wash down water closet (European type W.C. pan) with 9.00 No. 2821.94

integral P and S trap and PVC flushing cistern with fitting etc. complete

including plastic sheet cover including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 sand) and connecting cistern with closet & jet spray

heavy duty with S.S. braided hose 60cm long (A) vitreous china pattern in

white colour.

95 Providing and fixing Urinal or approved quality including connecting the Urinal 4.00 No. 1036.27

with waste pipe, tap etc. complete. (A) White earthenware flat back or corner

type size 430mm x 260mm x 350mm.

96 Providing and laying both side mirror polished Green marble stone slab 20 mm 3.00 Sq.m. 2836.08

(average) thick of approved quality including full moulded round front edge

fixed in wall for partition and jointed with grey cement slurry including rubbing

and polishing etc. complete.

97 Providing, erecting and fixing double coated PVC (ISI) mark water tank of 10000.00 Litre 3.95

required capacity each with all necessary fittings and connection etc. complete

on terrace as directed.

98 Providing and fixing 600 mm x 450 mm beveled edge mirror of superior glass 13.00 No. 833.73

mounted on 6 mm thick A.C sheet or plywood sheet or PVC framing and fixed

to wooden plugs with C.P. brass screw and washers.

99 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets 13.00 No. 603.19

fixed to wooden plugs with C.P. brass screws. (B) 600 mm x 20 mm size.

100 Providing and fixing S.W. Gully trap with C.I. grating brick masonry chamber 10.00 No. 1246.92

and water tight C.I. cover with frame of 300 x 300 mm size (inside) with

standard weight (i) square mouth traps (B) 150 mm x 100 mm size P or R type.

101 Providing and fixing C.P. brass stop cock of approved quality of 15mm dia. as 27.00 No. 205.83

approved by Engineer in charge with adjustable wall flange.

102 Constructing brick masonry chamber for underground C.I. inspection chamber 5.00 No. 2932.93

and bends with bricks having crushing strength not less than 35 Kg./cm2 in

C.M. 1:5 C.I. cover with frame (light duty) 455mm x 610mm internal

dimensions, total weight of cover with frame to be not less than 38 Kgs. weight

of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size) foundation

concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls & bed concrete etc.

complete. (i) inside dimensions 455mm x 610mm and 450 mm deep for single

pipe line.

103 Constructing brick masonry chamber for underground C.I. inspection chamber 2.00 No. 3660.76

and bends with bricks having crushing strength not less than 35 Kg./cm2 in

C.M. 1:5 C.I. cover with frame (light duty) 455mm x 610mm internal

dimensions, total weight of cover with frame to be not less than 38 Kgs. weight

of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size) foundation

concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls & bed concrete etc.

complete. (ii) inside dimensions 500 mm x 700mm and 450 mm deep for pipe

line with one or two inlets.

104 Providing and filling screened of burnt coat cinder including and consolidation 23.00 No. 600.56

etc. complete.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

105 Providing and fixing in position 300 mm high, 150 mm wide English / Gujarati 60.00 No. 707.00

letters made from 1.0 mm thick stainless steel sheet as directed by Engineer-

in-charge with all necessary tools and plants etc. complete.

106 Providing and fixing in position 150 mm high, English / Gujarati letters made 100.00 No. 404.00

from 1.0 mm thick stainless steel sheet as directed by Engineer-in-charge with

all necessary tools and plants etc. complete.

107 Constructing Sand witch Platform of 18mm thick Polished Black Granite at top 7.00 Sq.m. 3085.55

and 25 mm thick Kota stone slab using cement mortar 1:3 for sandwich and

fitting at bottom & edges with waterproof rigid adhesives including making

necessary grooves in walls with Vertical Kota stone 30 mm x 2 No. sand witch

thick every 60 cm centre to centre including all labour material of approved

quality including full moulded round front edge fixed in wall for partition and

jointed with grey cement slurry including rubbing and polishing etc. complete.

108 Extra for additional height of propping and centering where the height of 27.00 Sq.m. 390.34

propping and centering exceeds 4.0 mt. between supporting floor to ceiling

including temporary brick or stone pillars for supporting as required.

109 SIGNAGES ON WALL 10.00 No. 1010.00

Providing, fabricating & fixing wall signage's using 304 grade Stainless steel

brushed steel finish plate of 1.5 mm thick fixed on a wall using S.S. studs

including punched (laser cut) lettering carried out on S.S. plate of required size

and text as directed by Engineer over the S.S. plate etc. complete. Size: 18" x

110 SIGNAGES ON DOOR 53.00 No. 656.50

Providing, fabricating & fixing wall signage's using 304 grade stainless steel

1.5 mm thick brushed steel finish plate fixed on a door using S.S. studs and

with punched (laser cut) lettering carried out on S.S. plate of required size and

text as directed by Engineer etc. complete. Size: 12" x 6"

111 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight 7.00 No. 958.17

not less than 35 Kg.

112 Providing and fixing PVC cowl vent of following dia. etc. complete as directed 5.00 No. 126.25

(A) 110mm dia.

113 Providing and fixing PVC cowl vent of following dia. etc. complete as directed 5.00 No. 151.50

(B) 150mm dia.

114 Providing & filling Rubbles including hand packing & filling interstices with 191.00 Cum 1064.80

quarry spalls in behind abutments and between returns as directed.

115 Providing and laying controlled cement concrete M-200 and curing complete 7.20 Cum 4956.07

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Coping.

116 Providing and fixing M.S. grills / gates of required pattern to brick walls / 4590.00 Kg. 158.57

columns prepared with M.S. flats, angles, square / round bars, square pipes at

required spacing with necessary hold fasts as per detailed drawing and fixing

brick walls / coping / columns etc. complete including painting two coats &

applying primer coat (A) Ornamental grill.

117 Providing and casting in situ ordinary cement concrete M-100 for R.C.C. work 7.60 Cum 3308.05

in piers, abutment and R.C.C. return as per drawing including centering,

shuttering, scaffolding where necessary laying, vibrating, curing and finishing

118 Constructing cattle trap made from ISMC 100 border and G.I. pipe 50 mm dia. 12.00 Sq.m. 5183.32

HEAVY DUTY at 12 cm spacing by welding and necessary support of I.S.M.B.

100 x 75 x 6 section fixing in prepared chamber as per drawing by necessary

arrangement etc. complete.

119 Providing and laying controlled cement concrete M-200 and curing complete 243.80 Cum 3881.62

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Foundations, footings, base or columns and mass

120 Providing and laying controlled cement concrete M-200 and curing complete 21.60 Cum 5838.81

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in R.C.C. paradi.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

121 Providing and laying white glazed tiles 6 mm. thick in flooring treads of steps 12.00 Sq.m. 916.27

and landings laid on a bed of 12 mm. thick cement mortar 1:3 (1 cement :

coarse sand) finished with flush pointing in white cement.

122 Providing and laying white glazed tiles 6 mm. thick in skirting, risers of steps 42.00 Sq.m. 946.50

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand)

pointing in white cement and jointed with white cement slurry.

123 Providing and laying hand dressed polished blue Kota stone slab flooring over 17.00 Sq.m. 976.72

20mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand)

or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey

cement slurry including rubbing and semi mirror polishing with emery stone no.

600 complete. (A) 25mm thick.

124 Distempering (three coats) with oil bound distemper of approved brand & 67.00 Sq.m. 101.65

manufacturer & of required shade on wall surfaces to give an even shade,

over & including a primary coat with alkali resistance primer of approved brand

after thoroughly brushing the surface free from mortar dropping & other foreign

matter & also including preparing the surface even & smooth.

125 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1 26.00 Rmt. 23.68

including neat cement finishing watering etc. complete.

126 Box cutting the road surface to proper slope and camber for making a base of 236.00 Cum 104.20

road work including removing the excavated stuff and depositing on the road

side slope as directed for all lead and lift.

127 Supplying and stacking of graded stone aggregate of following size (for 218.00 Cum 1012.61

W.B.M.) including spreading (1) Machine crushed stone aggregate of 45mm to

63mm size.

128 Supplying and stacking of soft murrum / binding materials including spreading 56.00 Cum 271.74

etc. complete.

129 Rolling and consolidation using vibratory road roller 8 - 10 tonne capacity (C) 186.60 Cum 59.08

Water bound macadam (layer not exceeding 100mm thickness)

130 Compaction and finishing of cement concrete road by Trimix process providing 944.00 Sq.m. 63.12

extra labour charges for the trimix vaccume dewatering service process on

cement concrete road surface by using vaccum dewatering pump floater

surface vibrator including making grooves and rough finish to surface as per

instruction including levelling etc. complete.

131 Supplying premoulded bituminous joint filler (ii) 25 mm thick. 74.20 Sq.m. 611.13

132 Steel work, welded in built up sections framed work including cutting, hoisting, 45.00 Qtl. 9336.44

fixing in position and applying a priming coat of red lead paint and two coats of

matt finished oil painting etc. complete. (B) In trusses and trussed purlins upto

25m span and 15m overall height.

133 Providing corrugated PPGL sheet roofing fixed with galvanized iron J or L 300.00 Sq.m. 841.33

hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washer filled

with white lead complete including ridges, gutters etc. excluding the cost of

purlins, rafters and trusses. (1) 0.60 mm thick sheet.

134 Providing and fixing to wall, ceiling and floor 6.0 Kg.F/cm2 working pressure 140.00 Rmt. 275.73

polythene pipes of the following outside dia. low density, complete with special

flange compression type fittings, wall clips etc. including making good the wall,

ceiling and floor including lowering, laying and jointing PVC pipes and specials

of following class and diameter including cost of conveyance (i) 110mm dia.

135 Providing and fixing to wall, ceiling and floor 6.0 Kg.F/cm2 working pressure 100.00 Rmt. 580.75

polythene pipes of the following outside dia. low density, complete with special

flange compression type fittings, wall clips etc. including making good the wall,

ceiling and floor including lowering, laying and jointing PVC pipes and specials

of following class and diameter including cost of conveyance (ii) 160mm dia.

136 Providing and construction of Junction chambers of size 0.35 x 0.35 x 0.60 mt. 16.00 No. 929.20

with foundation concrete in C.M. 1:2:4 10 cm thick, half brick masonary wall in

C.M. 1:4, 50 mm thick flooring in C.C. 1:2:4 inside plaster 15 mm thick in C.M.

1:4 including connecting of rainwater pipe as per detailed drawing and as

directed by Engineer in charge.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

137 Providing and constructing filter chamber of size 2.06 x 1.21 x 1.20 mt. with 1.00 No. 8436.53

Foundation Concrete in C.M. 1:2:4 12.5 cm thick, 23 cm thick brick masonary

in C.M. 1:6, Half brick masonary partition wall in C.M. 1:4, inside plaster

mm thick in C.M. 1:4 and cover slab 10 cm thick in C.M. 1:2:4 with necessary

reinforcement and filling 30 cm with 25 to 40 mm size Kapachi and coarse

sand for 90 cm as directed including connection rainwater pipes as per

detailed as directed by Engineer in charge including cost of labour and

138 Providing water harvesting pit of 2.00 mt x 2.00mt x 4.00 mt. size for water 1.00 No. 32646.23

logging with excavation in any strata upto four meter depth, filling the pit with

B.T. Metal 40 mm in 0.60 mt. depth with 25-40mm kapachi, 0.30 mt. depth

and 2.0 mt. depth with coarse sand in layers including making P.V.C. line for

water inlet etc. as directed with 250mm dia bore 35 mt. depth and 150mm dia

P.V.C. pipe of 10 Kg.f/cm2 casing with gravel packing or as directed.

139 Supplying & installing of Dry Chemical Powder type 5 Kg. capacity Fire 10.00 No. 1565.50

extinguisher as per IS-2171 I.S.I. mark with necessary fittings etc. complete.

140 Providing Carbon dioxide type fire extinguisher 4.5 Kg. capacity with I.S.I. 5.00 No. 4848.00

mark and test certificate of explosive department of Nagpur.

` Electrical Items

141 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 181.00 Pts 582.77

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following

type, erected on PVC / Metallic / Wooden box, single mounting base frame

covered with textured / metallic / white front plate modules erected on / in wall

/ ceiling as per pipe erected, with necessary Lamp holder / ceiling rose as

directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall / ceiling complete Cat-III

142 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 72.00 Pts 809.01

are of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on PVC / Metallic /

Wooden box, single mounting base frame covered with textured / metallic /

white front plate modules erected on / in wall / ceiling as per pipe erected with

necessary ceiling rose as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall / ceiling complete Cat-III

143 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 7.00 Pts 612.06

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories. [I] For 6A Plug and 6 a switch with

2-1.5 sq.mm Cu. Wire from nearby switch board / mcb db board (f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

144 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db 7.00 Pts 894.86

board. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

145 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 37.00 Pts 309.06

socket erected on PVC / Metallic / Wooden box, single mounting base frame

covered with textured / metallic / white front plate modules erected on / in wall

/ ceiling with following type accessories Cat-III

146 Providing following type of Modular Type Accessories mounted with PVC / 39.00 Nos 25.25

metallic / Wooden box, single mounting base frame covered with textured /

metallic / white front plate, modules erected with necessary connections as per

site situation directed by Engineer In charge. (7) Blank Plate Single. Cat-III

147 ..do..(9) 16 Amp. SP one way switch Cat-III 26.00 Nos 180.79

148 ..do..(10) 6/16 Amp. Universal socket 26.00 Nos 199.98

149 ..do..(8) Computer RJ-45 socket 62.00 Nos 160.59

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

150 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following 1317.00 Mtrs 33.33

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & clamps with following

dia. of pipes, in approved manner as directed (b) 25 mm

151 Supplying & erecting approved make LAN cable of following size in existing 1636.00 Mtrs 76.76

pipe as per direction [D] CAT - 6e

152 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 1500.00 Mtrs 104.03

marked stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq.mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following

size (A) With medium class Rigid PVC pipe and accessories (b) 2 wire

153 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 1070.00 Mtrs 140.39

marked stranded Copper conductor wire in following type of pipe to be erected

in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

154 ..do..(i) 4 wire 10 sq. mm 245.00 Mtrs 532.27

(use earth wire of 4 sq.mm)

155 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 70.00 Mtrs 115.14

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. (f)

One wire 10.00 sq. mm

156 (g) One wire 16.00 sq. mm 70.00 Mtrs 177.76

157 ..do..(h) One wire 25.00 sq. mm 25.00 Mtrs 295.93

158 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv 117.00 Mtrs 58.58

grade ISI marked copper wires of following size to be erected as directed. (e)

1.50 Sq.mm 3 core round PVC sheathed

159 Providing & erecting Switch board for Computer or electric apparatus 62.00 Nos 1133.22

consisting of following modular type accessories mounted with PVC / Metallic

concealed / open box with single mounting base frame covered with textured /

metallic /white front plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat-III

160 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 30.00 Nos 373.70

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD <

15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED

LED driver efficiency > 85% (fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

ranges shown) (A) Tube Light with integral driver (iv) 22-24 Watts, Surge -

2KV, IP-20, conventional 4 feet Cat-III

161 Supplying and erecting led lamps with following wattage capacity of 220 to 240 19.00 Nos 188.87

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,

Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf

>= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder (iii)

10 to 15 watts.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

162 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 101.00 Nos 589.84

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure

die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt, LED driver efficiency > 85% (fitting required LM-79 &

LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage

capacity between the ranges shown) (A) Square/ Circular shaped Surface /

Recessed Mount Downlight with provision for spring loaded mounting clips

complete. IP20 (iii) 16-20 watts, Surge-2 kV Cat-III

163 (B) LED Panel Light with provision for Plane front frame with translucent cover 12.00 Nos 1794.77

fixed to housing complete. IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat-III

164 Supplying and erecting LED street light / Flood light fittings with High power 10.00 Nos 6177.16

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt. LED driver efficiency > 85%.

(fittings required LM-79 & LM-80 certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

65), Surge protection -4KV integral and Light must have 440VAC line supply

with over-voltage protection. (iv) above 90 to 119 watts Cat-III

165 Providing and erecting Approved make Four pole moulded case circuit breaker 1.00 Nos 17843.67

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing ICS=100% of ICU only Cat III

166 Providing and erecting Approved make Four pole moulded case circuit breaker 2.00 Nos 8861.74

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

125A. with fixed thermal & magnetic release suitable to work on A.C. supply

50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

167 Providing and erecting Approved make Four pole moulded case circuit breaker 3.00 Nos 6790.23

having breaking capacity ICU of 25 KA. at 415 V having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

168 ..do. With Enclosure 1.00 Nos 7469.25

169 Providing Approved make Triple Pole Metal Clad Switch Fuse Unit 415/500 V. 1.00 Nos 8012.33

with HRC fuse of suitable load and neutral link confirming to IS (a) 200 A Cat-III

170 Providing and erecting Approved make Earth fault Relay suitable to mount with 1.00 Nos 5482.28

inter connection suitable to following size of moulded case circuit breaker

having CT ratio & MCCB rating as following along with shunt trip 220V AC.

with all internal connections & complete erected in existing M.S.housing. (2)

125 A -200 A, CT Ratio 1/200

171 Supplying & erecting approved make Four Pole 415V change over switch 1.00 Nos 12241.20

interior for panel mounting with operating mechanism A.C.23 duty confirming

to IS for (D) 200A Cat-lll

172 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 0.80 Rmtrs 3202.71

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

173 (C) Suitable for 300 Amp. capacity 1.00 Rmtrs 4909.61

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

174 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system 16.00 Nos 297.95

and having breaking capacity 10 KA to be erected in existing box confirming to

IS 8828/1996 with ISI Mark Cat-III

175 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable 144.00 Nos 123.22

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box confirming to IS 8828/1996 with ISI Mark Cat-III

176 Providing & erecting 240 V MCB double pole switch for motor & inductive load 1.00 Nos 362.59

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity (B) 40 Amp. Cat-III

177 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 2.00 Nos 736.29

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (b) 40 Amp. Cat-III

178 ..do..(c) 63 Amp. Cat-III 18.00 Nos 811.03

179 Providing and erecting Sheet Steel powder coated MCB distribution board - 8.00 Nos 3412.79

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs. (The DBs should be used of same company of

MCB to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing per phase isolation type (PPI) (b) sheet steel double

door (iii) 8 way

180 (A) single phase incoming and horizontal single phase outgoing (b) sheet steel 1.00 Nos 629.23

double door (IP-43) (i) 4 way

181 Providing and erecting Approved make RCCBs conforming to IS: 12640 and 25.00 Nos 2458.34

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component for following Max. rating erected as directed (ii)

Amps. DP Cat-III

182 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 19.00 Kgs 77.77

183 Supplying & erecting earth pit of minimum bore dia.150mm size approved 5.00 Nos 4591.46

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.

(A) (approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop :- < 1 volt at no load & dry form, Sulphar content:- <2% (C) Back

fill Compound :- Earthing compound should be capable to retain moisture for

long time necessary test report must be submitted by Agency. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

184 Providing & erecting weather proof, dust & vermin proof, floor mounted front 2.40 Sq mtr 14902.55

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories, supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite

control fuses / MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket, heavy duty end terminal

connection, danger notice board, necessary ventilation, earthing strip

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

The Panel shall be painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base

beams) The panel shall be supplied with following approved manufacturers

with following size. (B) The standard companies switch gear shall be used and

only manufacturers at CPRI approved factory (i) with 350 mm depth

185 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 22.00 Mtrs 454.50

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables (D) 3 1/2 core 70 Sq.mm (35

Sq.mm 1/2 core)

186 (E) 3 1/2 core 95 Sq.mm (50 Sq.mm 1/2 core) 102.00 Mtrs 589.84

187 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable 180.00 Mtrs 151.50

multistrand / Solid Aluminium conductor for 1.1 kV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (B)

core 6 Sq.mm

188 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 110.00 Mtrs 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground.

189 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or 55.00 Mtrs 74.74

required depth for laying any size of cable or locating the fault all over the run

and back filling the same and making the surface as normal ground.

190 Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as 90.00 Mtrs 249.47

per IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed

for laying of cable. The pipes as following size of dia & weight per 6 mtr. (C)

mm inner dia.

191 Providing and fixing heavy duty flange type brass cable gland with rubber ring 48.00 Nos 38.38

for PVC insulated armoured cable complete with out going tails, insulating tape

etc. for following size of cables. (B) 2 to 4 core 6 Sq. mm

192 Providing and fixing heavy duty flange type brass double compression type 2.00 Nos 103.02

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc. for following size of cables. (C) 3 & 1/2 core

193 (D) 3 & 1/2 core 95 Sq. mm 4.00 Nos 131.30

194 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of Nos

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

195 ..do..(D) 35/50 Sq.mm. 6.00 Nos 20.20

196 (E) 70 Sq.mm. 6.00 Nos 25.25

197 (F) 95 Sq.mm. 12.00 Nos 40.40

198 ..do..(A) 1.5/ 2.5/4/6 Sq.mm 80.00 Nos 6.06

199 Providing and erecting Approved make Ceiling fan with double ball bearing ISI 72.00 Nos 1596.81

mark with condenser A.C. 230V.50 Hz.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

200 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 72.00 Mtrs 108.07

down rod erected duly painted for fan complete with proper insulation without

leakage and earthing.

201 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 72.00 Nos 108.07

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

202 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan 72.00 Nos 18.18

203 Supplying & erecting approved make low noise decorative exhaust fan having 19.00 Nos 1703.87

square frame ABS body with inbuilt lowers & square frame. 250mm with

RPM Cat.II

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

204 Supplying & erecting approved make SMC press moulded composite FRP 10.00 Nos 515.10

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way (3P+N+E), DIN rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps & earth bolt of following size of

box. (B) 250mm x 200mm x 100mm [deep]

205 Supplying & erecting approved make time switch with single pole air break 1.00 Nos 2354.31

contacts suitable for 230 V.15/16A.complete with self starting motor driven

clock ‘ON’ &’ OFF’ automatic arrangement at any predetermined time during

each 24 hours, with nickel cadmium rechargeable battery backup erected as

206 Supplying & erecting power contactor, AC3 duty for time switch complete 1.00 Nos 2782.55

erected as per direction Cat III (D) 4 pole 440V 40 Amp.

207 Supplying and erecting approved make panel mounting type Digital Voltmeter 2.00 Nos 1275.63

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

board with all connection, wiring etc. with manufacturers calibration certificate.

208 Supplying and erecting approved make panel mounting type Digital Ammeter 2.00 Nos 1558.43

having 3 digits LED display, external CT operated, calibrated for 0 to

Amps suitable to operate on 500 Volt AC, erected on existing panel board

with all connection, wiring etc. with manufacturers calibration certificate.

Supply 500 V on existing panel board with necessary connections.

210 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 6.00 Nos 274.72

ratio 15 VA burden erected in existing CRCA box duly secured with insulating

materials connected to the meter

211 Supplying and erecting approved make suitable panel indicator LED type 6.00 Nos 43.43

lamp, lens cover, complete erected with necessary connections.

212 Providing, erecting, fabricating the M.S. structure as per requirement on site 68.00 Kgs 77.77

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per direction of engineer in

charge with necessary grouting, cementing, plastering & finishing complete.

213 Providing & erecting open well horizontal mono block pump set with cast iron 2.00 Nos 20621.17

body, complete for three phase submersible motor having [D] For 5 HP

phase open well horizontal mono block pump set suitable for 1350 LPM to

LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe

214 Supplying & erecting approved make motor control cubical panel (Direct - on - 2.00 Nos 7722.46

line) made from 16 G. CRCA sheet duly epoxy powder painted inside and

outside with hinged doors and locking, arrangement consisting of suitable size

of ON- OFF isolator (AC - 3/23duty) main fuses, single phasing preventer,

indicating lamps for R- Y - B phases, overload relay, Automatic water level

wires duly socket crimped, main contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted on wall as directed. The

isolator, overload relay & contactors will be of L & T, Siemens or BCH make

only. (A) DOL up to 5.0 H.P.

215 Lifting of submersible motor pump set complete with required No .& size of 2.00 Nos 1711.95

casing pipes by means of proper chain pulley block and pipe. wrenches. Job

includes stacking of pipes chronologically after due checking of threads. (A)

Up to 60 mtrs.

216 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 120.00 Rmtrs 146.45

Submersible copper cable approved make of following size. (C) 3 Core x

217 Providing and erecting water cooler having storage capacity 80Ltr. & cooling 2.00 Nos 54515.76

capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚ C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating coil, thermostats, relay etc. complete

with necessary inlet & outlet connection. The body of water cooler will be made

from Stainless Steel. and ISI Certified.

It. Rates in Total

Description of Item Qty. Unit

No. Figure Amount

218 Supplying & erecting 5 stage single reverse osmosis water purification system 2.00 Nos 29187.99

with M.S. powder coated frame, prefilter housing with 'O' ring presediment

filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention

with 40 psi inline type post carbon filter auto low & high pressure switches with

following size of storage tank & LPH capacity & erected as directed [C] 50 Ltr

/ Hr with 150 psi 2 nos booster pump

219 Providing and erecting Inverter based approved make split air-conditioning unit 6.00 Nos 56833.71

consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper tubing, drain PVC pipes

suitable for (cost includes Eco Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core cutting. (1) For ISEER

Range (KWH/KWH) (3.1 to 3.99) (C) for 1.7 to 2 ton capacity.

220 Supplying and erecting insulated pair of soft copper tubing open or concealed 24.00 Rmtrs 1158.47

including power and control cable,necessary PVC drain pipes for Split /

Cassette AC machine up to 4 TR capacity.

221 Supply and erecting of Static Stabilizer suitable for following capacity of A.C 6.00 Rmtrs 4029.90

Machine the Stabilizer Must have Minimum Technical Specification are Input

working Single Phase Voltage Range Up to 150V-280V.50Hz, Output Voltage

Range Up to 200V-240V, 50Hz, Autoreset Facility, LED Display for Indicating

Voltage, Spike / Surge Protection, Time Delay Facility, Proper Wall Mount

Facility with required accessries & on site 3 year Replacement / Repairing

Warranty. (2) For 2 Ton Thermal Overload Protection 15 Amp.

TOTAL Rs.

i.e. Rs. Three Crore Thirty Three lacs Eighty Eight thousand Seven hundred Twenty One and Fifty Three paisa

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Bharuch Bharuch Bharuch