Providing Garden Lights and allied Works for the Administrative Office Building Premises at NMPA

Supply of 150W high quality long throw mono color wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 150W, CCT: 1800K/3000K/4000K/6000K, (as per the design approval), Optics: PMMA with holder, Beam Angle: 15º/25º/45º/60º, Control: ON/OFF, Body: Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in different applications. Power Input: AC 110-230V / Constant DC 24V with external driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK08, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP66, NABL Accredited laboratory or 3rd party testing laboratory approval. Power Loop In/Out along with IP67 connector having the length >300mm.

Supply of 50W High quality Decorative Round Post Top Light, Power Input: 3000K, including GI Pole with Pu painting Height: 3000mm, Diameter: 400mm, Protection Rating: IP65, Input power: AC 110 - 230V, 50Hz.

Supply of 9W Mono color Spike light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", Mounting Structure: Adjustable wall mount yoke arrangements for fixing the lights. Power consumption : 09W, CCT : 1800/3000/ 4000/6000K, (as per the design approval) Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input: AC 110-230V, Surge Protection: Inbuilt surge protection 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK05, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, LED life should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK05, IP66, NABL Accredited laboratory or 3rd party testing laboratory approval.

Supply of 100W high quality long throw mono color wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embosed in the die cast. Power consumption: 100W, CCT: 1800K/3000K /4000K/6000K, (as per the design approval), Optics: PMMA with holder, Beam Angle: 15º/25º/45º/60º, Control: ON/OFF, Body: Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in different applications. Power Input: AC 110-230V / Constant DC 24V with external driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK08, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP66, NABL Accredited laboratory or 3rd party testing laboratory approval. Power Loop In/Out along with IP67 connector having the length >300mm.

Supply of 10W Bollard, Power Input: AC 85-265V, Size: Dia145xH900mm, CCT: 3000K/4000K/6000K Ingress Protection: IP65, Housing material: Aluminum, IK Rating: IK07, Surge protection: 4KV

Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI/ floor or any other pipe using required size of reducer, wiring using suitable wires.

Fixing and wiring of 150W LED street light fittings with suitable clamps brackets, lamps, bolts and nuts to 3 mtrs long poles.

Fabricating, supplying and erection of 3 Mtrs long hot dip Galvanized Octagonal Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47m/s for 3 m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom 130 mm, top 70 mm with 3 mm thick, suitable base plate and 4Nos of 300mm long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 3 m - Top 70 mm and Bottom 130 mm dia.

Supplying and fixing of 1 mtr length Hot dip Galvanized M.S. Bracket suitable for outdoor Luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. C channel Size: 50 x 100 x 50 x 6 mm

Supplying and drawing flexible Multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and PVC insulation sheathed suitable for working voltage up to 1100V as per IS:694:2010 a) 3C X 2.5 Sq.mm

Supplying of 1.1KV, XLPE or Heat resistant PVC insulated, PVC extruded inner sheathed Armoured LT UG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. a) 4C x 10 Sq.mm

Labour charges for laying LT UG Aluminium cable in existing trench/GI pipe /Stoneware pipe/ on wall/on pole as required. a) 4C x 10 Sq.mm

Supplying and laying double walled corrugated HDPE Pipe including all necessary connecting sockets/couplings/tees/ bends/ end caps of same materials in existing trench as per IS 14930 part-II suitable for drawing underground cables. a) 63mm OD/50mm ID

Digging of trench of 0.3 meter deep x 0.3 meter wide, refilling the trench to the required ground level and consolidating etc., wherever favor block & concrete area the same have to be refinished as it was by tighten the loose soil and supplying required materials, complete. a) Hard Soil

Providing foundation in position plain cement concrete of mix 1:2:4 with cement @ 240Kgs with 20mm and down size graded granite metal coarse aggregates @ 0.878 CMT and the fine aggregates @ 0.459 CMT machine mixed concrete laid in layers not exceeding 15cms thick, well compacted including cost of labour, HOM of machinery, curing complete. (For pole/bollard foundation, filling of concrete/road surface) 50X300x300 mm

Providing foundation for 3 mtrs Octagonal pole including Earth Excavation and making of RCC foundation using M 20 concrete, steel reinforcement, shuttering complete as

Supplying, fixing and wiring earth electrode for panel using 40 mm dia, 2.90 mm thick GI pipe 2.5 Mtr long with funnel with mesh and suitable size reducer fixed on the top of the Electrode. The funnel should be enclosed in a CC chamber of 400x400x400 mm with cast iron cover. The electrode shall have staggered holes of 12mm dia and the electrode covered 15omm all-round with alternate layers of salt and char coal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.

Supplying and running GI strip for grounding connections, using necessary fixing materials as required. a) 25 x 6 mm GI strip

Supplying and fixing of street light timer box of size 30ox600x170mrn made of thermoplastic modular panel with lid, shock proof, IP 65 having internally embedded gasket on both lid and flap with hylum sheet, din rail with 1Osqmm copper wire as complete and consisting of following components, a) 63A, TPN MCB- 1 No b) MNX 40A ,4 - Po1e Contactor-l No c) 20A TPN MCB - 2 Nos. d) 24 Hrs Time switch - l No. e) 40A Connectors -10 Nos.

Supply and installation of 200mm x 200mm x 98mm Thermoplastic type pole box with provision for suitable 6A SP MCB, 25A 4 way connector/ terminals, crimping the lugs with loop in / loop out cables.

Please Enable Macros to View BoQ information