Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹31.8 LAccepted-AOC | L-1 | Accepted-AOC - | |
| 2 | L-2₹36.3 L+₹4.4 L (13.7%)Rejected-Finance VILL SAKRAH PO CHAMBI TEHSIL SUNDERNAGAR DISTT MANDI HP | SUNDERNAGAR | MANDI | HIMACHAL PRADESH | L-2 | Rejected-Finance Lowest-2 | |
| 3 | L-3₹36.5 L+₹4.6 L (14.4%)Rejected-Finance HIMACHAL PRADESH HP | KANGRA | HIMACHAL PRADESH | 176204 | L-3 | Rejected-Finance Lowest-3 | |
| 4 | L-4₹37.9 L+₹6.0 L (18.9%)Rejected-Finance | L-4 | Rejected-Finance Lowest-4 | |
| 5 | L-5₹38.4 L+₹6.5 L (20.4%)Rejected-Finance | L-5 | Rejected-Finance Lowest-5 |
Tender Value
₹45.1 L
EMD Value
₹75,100
Closing Date
4 Jan 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Jal Shakti Division Baggi
Executive Engineer Jal Shakti Division Baggui
as per BOQ
2023_HPIPH_83086_1
EE-JSD-BAGGI/2023-27720-70 DATED 21/12/2023
Open Tender
Civil Works
Item Rate
180 days
Baggi
as per NIT
6 documents required · 6 mandatory
₹800
EE Baggi
₹75,100
Yes
17 May 2024
23 Dec 2023
5 Jan 2024
23 Dec 2023
4 Jan 2024
23 Dec 2023
Amount
Cutting in earth work and disposal of excavated earth upto a lead of 20 metres in pick work 50% and jumper work 50% in all leads and lifts.
Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick 90% jumper work 10%.
Providing and laying cement concrete 1:6:12 ( 1cement:6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth.
Providing and laying cement concrete 1:3:6( 1cement:3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth.
Providing and laying cement concrete work 1:1½ : 3 (1Cement : 1½ Sand : 3 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:
Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings,cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth in all leads and lifts
Suspended floor roofs landing shelves and therir supports with in all leads and lifts as per the direction of Engineer-in-Charge.
Wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level with in all leads and lifts.
Providing and laying cement concrete work in M-30 grade but not leaner than nominal mix 1:1:2 (1Cement : 1 Sand : 2 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:
Foundations and plinth with in all leads and lifts as per the direction of Engineer-in-Charge.
Wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level with in all leads and lifts.
Providing and laying cement concrete 1:5:10 (1Cement : 5 Sand : 10 graded stone aggregate 40 mm nominla size) with 15% plum and curing complete excluding cost of form work in retaining wall, the size of plum shall usually be 150 mm to 300 mm as per HPPWD specification with all leads and lifts.
Random rubble masonry/polygenal rubbe masonry ( un-coursed/broght to courses) with hard stone of approved quality in foundation and plinth including levelling up with C.C 1:6:12(1cement:6 sand :12 graded stone aggregate 20mm nominal size) in CM 1:6(1cement:6sand) complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level 2nd class bricks cement mortar 1:6(1cement:6sand).
Providing and fixing pressed steel frames doors, window, clearstory window and other frames wrought ramed and fixed in position manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50x25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-cCharge. (Profile C)
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, of second class Deodar wood including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge.
Providing form work with steel plates 3.15mm thick welded with angle iron in frames 30x30x5mm so as to give a fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:-
Foundations ,footings,bases of columns and the like & mass concrete in all leads and lifts as per the direction of Engineer-in-Charge.
Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to 200 mm in thickness.
Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth.
Vertical surfaces such as walls (any thickness), partitions and the like including attached pillasters, buttresses,plinth and string courses and the like with in all leads and lifts.
Providing form work of ordinary timber plankings so as to give a rough finish including centering shuttering, propping etc. hight of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for-in-situ reinforced concrete and plain concrete work in:- arches, domes, baults upto all span beyond 6.00 mtr.span in all leads and lifts.4mtr
Arches Dome vaults up to all span complete in all leads and lifts
Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth.
Foundation & footing complete in all respect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.
Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level.
Half brick masonary in common burnt clay buildings bricks in cement mortar 1:3(1cement:3sand) 2nd class bricks.
Cement pointing on brick work with cement mortar 1:4 (1cement:4sand) Ruled pointing within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Cement concrete flooring 1:2:4 (1Cement : 2 Sand :4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 50mm thick complete in all respect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.
Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 (1 cement : 3 sand) over a 12mm layer of C.M. 1:3 (1 cement : 3 sand) finished neat with in all leads and lifts complete in all respect.
6mm cement plaster to ceiling in cement mortar 1:3 (1 Cement :3 Sand) with in all leads and lifts.
15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 (1 cement: 4 sand)
20 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 (1 cement:4 sand)
Providing & fixing M.S. grills of required pattern in wooden frames of window etc. with M.S. flats square or round bars with round headed bolts and nuts or by screws plain grills with in all leads and lifts.
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 8S G. with eire of dai 0.56mm for doors windows and clerestory windows and bright finished black enamelled iron hings with necessary screws with in all leads and lifts 40mm thick 2nd class deodar wood within all leads and lifts.
Stone / Boulder filling under floor dry hand packed tightly with in all leads and lifts.
Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement: 3sand: 6 graded stone aggregate 20mm nominal size).
Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design. complete in all leads and lifts complete in all respect.
White washing with lime on un-decorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar dirt and other foreign matter with in all leads and lifts.
Distempering with dry / oil bound washable distemper of approved brand and manufacture to give an even shade (Two coats) and of required shade on undecurated wall surface to give an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth.
Finishing wall with water proofing cement paint on approved brand and manufactur and of required shade on un decorated wall surfaces(two coats) to give an even shade after thoroughly brushing including cleaning of oil dirt, dust and other foreign matters , sand papering and knotting etc in all leads and lifts complete in all respect.
Providing and fixing anodised aluminium sliding door bolts with bolts and nuts screws etc complete 300x16mm
Providing and fixing andised aluminium tower bolts( barrel type) with screws etc complete. 250x10mm
Providing and fixing MS handles with necessary screws etc complete 125mm.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt,and other foreign matter , sand papering and knotting ready mixed paint brushing wood primer pink with in all leads and lifts.
Painting two coats ( excluding priming coat ) on new wood and wood based surfaces, with enamel paint to give even shade including cleaning the surface of dirt, dust and other foreign matter, sand preparing and stopping with enamel paint other than white with in all leads and lifts.
Industrial tiles10 mm thick with marble chips of specified size in flooring cement mortar 1:6 ( 1:cement 6 : sand) jointed with neat cement slurry ( Dark shade) in all leads and lifts.
Laying, jointing and testing of GI pipes (Light Class) of following diameter screwed and socketted pipes, including GI fittings in all leads and lifts as per the directions and satisfaction of Engineer-in-charge, (Earth work in trenches to be measured and paid for seperatly) .
Inlet , outlet & Scour pipe of 65mm dia ( MC)
Providing and Fixing Cast steel/ Iron Sluice Valve(with hand wheel)as per IS:780-1984 class-I upto 300 mm dia.(i/c brass spindle & as per 2906-1984 class-II for dia. 300 mm) complete with bolts,nuts,rubber insertion etc.(the tail piece if required shall be measured & paid for separately)complete in all leads and lifts and to the entire satisfaction of Engineer-in-Charge.
65 mm supply valve ( PN-1, Flange Table -5)
Steel work welded in built up sections,trusses and framed work including cutting,hoisting, fixing in position and applying a priming coat of red lead paint in all leads and lifts in gratting,framed guard bar,ladders,railingbrackets and similar works.
Providing and fixing wire gauge for vetilitator complete in all leads and lifts and to the entire satisfaction of Engineer-in-Charge.
Providing Manufacturing, Supplying, Fabrication and Fixing of MS Fabricated Protection Panel 750mmx750mm made with MS Angle 40x40x4mm for frame, MS Angle 30x30x3mm for cover, MS Flat 25x5mm for fixing of sliding door bolt and MS Sheet4.00mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle, MS Flat & MS Sheet, embedding in RCC Slab by drlling holes in MS angle & in RCC Slab, provision for providing and fixing sliding door bolt 300x16mm, MS Handle 100mm, Lock and applying a coat of red lead paint & Painting two coat with steel paint (Firoze Blue) complete job in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Providing and laying in retaing wall and breastv wall 10.0 kg/cm2 working pressure unplasticized PVC pipe confirming to IS :4985-1968) to make weep holes complete including mking good the walls 100mm dia nominal bore complete job in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
KUSHAL SINGH RAGHAV
LEKH RAJ
Pitamber Lal
Bhader Singh
BAL CHAND WALIA
DILA RAM
Naagender Pal
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .