REPAIR MAINT OF THYAMAYA BN SQUASH COURT TRAINING SHED AUDITORIUM AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolition of brick work/stone masonary built in cement mortar complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed Note- WPC will be measured paid as supply only under respective items separetely.

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.

Supply only liquid water proofing compound complete all as specified & directed.

PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work and demolition of existing old cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel not ex 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

PCC 1;4;8 type D-2, using 40 mm graded stone agg as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.

Glass dividing strips 3mm thick and 38mm wide inserted in position and confirm to design complete all as directed.

Rubberised chequered cement concrete coloured tiles 25 cm X 25cm X 20 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed

Taking down shutter of any description n.exc 1 sqm each complete all as specified & directed.

Pressed steel frame of 105x60 mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed.

30 mm thick flush shutter, ISI marked, solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified & directed.

2nd class hard wood, plain straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

35mm thick 2nd class H.W. plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed

35mm thick 2nd class H.W. glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

30mm thick 2nd class H.W. glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc (with sash bars) devided into squars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets complete all as specified and directed.

Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded as per Drg No TD 032 Sh 1/10 to 10/10 complete all as specified and directed.

Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded as per Drg No TD 032 Sh 1/10 to 10/10 complete all as specified and directed.

Steel ventilators with top hung shutter including hinges, steel peg stay as per Drg No TD 032 Sh 1/10 to 10/10 complete all as specified and directed.

Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed.

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L or J type hooks and washer as in roof, wall etc with grade of zinc coating 120 complete including dismantling existing sheets all as directed.ary work.

0.80mm thick plain galvanized mild steel sheeting with grade of Zinc coating 120 fixed with "L"or "J" type hooks and washer as in ridges, hips, valley gutter etc including dismantling old sheets in ridges, hips valley gutter any pattern etc complete all as specified and directed

25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in roof padding and finishing the councret surface even and smooth without using extra cement with and including demolition of existing concrete complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base of floors with and including demolition of existing concrete complete all as specified and directed.

Polycarbonate skylight transparent roof sheet 10mm thick multi wall, including aluminium strips and rubber packing etc, fixing with screws with washer in metal frames including dismantling of existing sheets etc complete all as specified and directed.

Polycarbonate skylight coloured roof sheet 10mm thick multi wall, including aluminium strips and rubber packing etc, fixing with screws with washer in metal frames including dismantling of existing sheets etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

Powder coated aluminium anodised door with frame and shutter and glazing 5mm thick glass and 12mm thick prelaminted particle board exterior grade in bottom panel (kit ply, novapan) glass fixed with rubber gasket with aluminium galzing clips, section of aluminium door shall be of following size :- Frame ; 100 x 44 x 1.98 mm glass thickness with rawal plug. Middle lock rail ; 150 x 44 x 1.98mm thick, Bottom rail ; 150 x 44 x 1.98mm thick, Top rail/Style : 85 x 44 x 1.98mm thick, Glazing beading : 0.70 mm thick , Aluminium handle `D' type 150mm, Aluminium tower bolt 9.9mm dia shoot 200mm long, Mortice lock - 100 mm 4 lever, aluminium stooper cleat - 02 Nos including taking down existing doors etc and making good of wall complete all as specified and directed.

Powder coated aluminium anodised windows/ventilators with side hung shutter and frame made with aluminium section with and including glass (as specified below) Aluminium section shall be of size:- Frame 65 x 40mm x 1.98mm thick, Top/bottom and side style/rails of Shutter - 44 x 47mm x 1.98mm thick, Glass : 5mm thick tinted glass fixed with rubber gasket with aluminium beading. Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and including taking down existing and making good of wall surface with matching to existing surfaces complete all as specified and directed.

Powder coated aluminium Anodized frame for doors , windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc fixed in repair complete all as specified. (Minimum thickness of powder coating not less than 50 micron) complete all as directe

5.5mm thick frosted glass fixed in aluminium door/window/partition fixed with rubber gasket and aluminium beading complete all as directed.

12 mm thick pre laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in partitions, cup board shutter / shelves, pelmet box and similar items fixed in repair complete all as directed.

Butt hinges, 100mm long, medium weight, cold rolled, stainless steel complete all as directed

Butt hinges, 75mm long, medium weight, cold rolled, stainless steel complete all as directed

150mm long aluminium anodized handle cast complete all as directed.

100mm long aluminium anodized handle cast complete all as directe

200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

100mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

18/19mm thick colour PVC prelaminated board fixed to timber frame work as in cup board shutter / shelves, pelmet box and similar items fixed in repair complete all as directed.

Magnetic PVC catcher for kitchen cup board complete all as directed

100mm hasp and staple safety type aluminium anodised with MS hinge pin including bolt to hinge plate and fixed with screws complete all as directed.

Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed

Floor door stoppers of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in repair in door, overall length of cover plate 150mm complete all as specified and directed

Mild steel 200mm ordinary rat tail pattern spring including roller and roller plate complete with necessary welding to frame as required at site fixed in repair complete all as directed.

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.

3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed.

PVC coated MS curtain rods 20 mm dia with brackets, finials golden colour fancy type all as directed and approved fixed in repair complete all as directed.

Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Glazed ceramic coloured tiles of size 350 mm x 250 mm x 7mm thick, or 450mm X 350mm X 7mm thick as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete and dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in vertical surface such as dado skirting and rised to step floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 10 mm thick screed bed or backing layer in CM 1:4 complete and dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick laid over 20mm thick cement sand screed CM 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding and removing rubbish off the premises complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick laid over 10mm thick rendering in CM 1:4 as base on vertical surface laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding and removing rubbish off the premises complete all as directed.

Granite stone of any colour (of any type) 20mm thick machine cut (table rubbed & polished), as in floors, cooking platforms and like bedded with and including 20 mm thick screed bed in CM (1:4) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone including dismantling of existing stone slabs including cement mortar bedding and removing rubbish off the premises complete all as directed.

Cutting and grinding of existing terrazzo/Kota stone floor surfaces (2 cut) on horizontal & vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as directed.

Precast RCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in cover slab, set and jointed in CM 1:4 incl demolition of existing old RCC slabs of any description complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)

Mild steel TMT bars 6mm to 8mm dia cut to length bent to length bent to shape required including cranking bending spirally for hooping for columns hocking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Repairing to existing door/ window chajjas upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

Taking down existing broken portion of upward / inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area exc 0.50 Sqm but n exc 5.0 Sqm and repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

Chromium plated basin inlet connection (angles valve) 15mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed. Make: ESSCO (Jaquar) cat No.MQT-526KN or equivalent of Make cera/Hindware

Chromium pillar cock rocket type with areator 15mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed. Make- ESSCO (Jaquar) MQT-507KN or equivalent make of cera/Hindware

15mm dia chromium plated concealed stop cock, heavy body with cap fixed in repair complete all as specified and directed. Make: ESSCO (Jaquar) cat No.MQT-514AKN or equivalent of Make cera/Hindware

15mm dia two way chromium plated angle valve with wall flange fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No.MQT-526AKN/526AFKN or equivalent of Make cera/Hindware

15mm Chromium plated basin mixer with U shaped round casted spot with 450mm long braided hoses fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No MQT-516AKN or equivalent of Make cera/Hindware

15mm Chromium plated wall mixture with 115mm long bend pipe for connection to overhead shower (with bush and piston divertor fitting) with areator fixed in repair complete all as directed. Make ESSCO (Jaquar) cat No,MQT-517BKN or equivalent of Make cera/Hindware.

15mm bore long body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No MQT-512KN or equivalent of Cera/Hindware

15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No MQT-511KN or equivalent of Cera/Hindware

15mm bore 2-way long body bib cock with wall flange chromium plated fixed in repair complete all as directed. Make:ESSCO (Jaquar) cat No. MQT-512AKN or equivalent of Make cera/Hindware

Overhead shower round shape 100mm dia round shape singlei flow (ABS body chrome plated with grey face plate) with with rubit cleaning system with including 115 mm long shower arm fixed in repair complete all as directed. Make:-ESSCO (Jaquar) Cat No. EOS-542N or equivalent of make Cera/Hindware

15mm bore stainless steel jet spray with 1.00meter PVC tube fixed in repair complete all as directed. Make: ESSCO (Jaquar) Cat No. ALE-547 or equivalent of make Cera/Hindware

Brass chromium plated towel rail 600mm long fixed in repair complete all as directed. Make : ESSCO (Jaquar) Cat No. AEC-1111 or equivalent of make Cera/Hindware

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repair complete all as specified and directed

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

Plastic water closet seat cover, white, closed pattern with flat bottom cover and mild steel chromium plated or aluminised hinging device fixed in repair complete all as specified and directed.

Chromium Plated brass soap dish fixed in repair complete all as directed.

100mm dia chromium plated grating with/without hole fixed in repair complete all as directed.

Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed.

Ball valve 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 455 gms fixed in repair complete all as specified and directed.

15mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

25mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

40mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore outlet fixed in repair complete all as directed.

Salt glazed stone ware gully trap size 150x150mm, square & rounded mouth, type ‘P’ set & jointed to drain pipe with cement mortar including concrete 1:3:6 type C2 (40mm graded stone agg) in bed & surrounding complete fixed in repair all as directed.

Pivot for glazed aluminium door as per existing including taking down existing glazed aluminium door shutter and refixing in the same position after fixing of pivot complete all as specified and directed.

Aluminium body door closer hydraulically regulated designation no 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kg fixed in repair complete all as directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and directed.

Disconnecting existing tank of any description, setting aside (or lowering if required) for cleaning and removing all Scale dirt etc and from mouths of circulating pipes including washing with bleaching powder etc and hosting, reconnecting and re fixing in position of capacity exc 250 ltr but n exc 500 ltr complete all as specified and directed.

Disconnecting existing tank of any description, setting aside (or lowering if required) for cleaning and removing all Scale dirt etc and from mouths of circulating pipes including washing with bleaching powder etc and hosting, reconnecting and re fixing in position of capacity exc 500 ltr but n exc 1000 ltr complete all as specified and directed.

Disconnecting existing tank of any description, setting aside (or lowering if required) for cleaning and removing all Scale dirt etc and from mouths of circulating pipes including washing with bleaching powder etc and hosting, reconnecting and re fixing in position of capacity exc 1000 ltr but n exc 2000 ltr complete all as specified and directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

PVC lid for PVC water tank with hinging device and locking arrangement of capacity 1000 ltr to 2000 ltr with necessary nuts, bolts and washer etc fixed in repair complete all as directed.

Solid PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and Drawing in SSR fixed in repairs complete all as specified and directed.

5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing in repairs on to wall complete all as specified and directed. Make:- PVC frame as per specification and drawing in SSR complete all as specified and directed.

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

Preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as directedq

Preparation of old wooden surfaces of any description, not other wise described over 10cm width or girth and apply one coats of varnishing complete all as directed

Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint wash complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of weather proof exterior emulsion paint (Apex paint on walls complete all as directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) complete all as directed.

Preparation of new plastered surfaces of wall and applying three coats of white wash etc complete all as directed.

Preparation of new plastered surfaces of wall and applying two coats of oil bound emulsion over a coat of chalk whitening complete all as directed.

Preparation of new plastered surfaces of wall and applying two coat of weather proof exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls over a coat of primer complete all as directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash etc complete all as directed.

Taking down existing brick pattern tiles of size 200 x 58mm x 15mm as in wall cladding and filling with rendering of necessary thickness in cement mortar 1:4 to match the existing brick pattern tiles with necessary groove cutting including preparation of new tiling surface and applying two coat of cement base paint over a coat of primer and making good the surfaces to receive new work upto a height of 3.50 metre with & including necessary scaffolding etc complete all as directed.

Taking down existing brick pattern tiles of size 200 x 58mm x15mm as in wall cladding and filling with rendering of necessary thickness in cement mortar 1:4 to match the existing brick pattern tiles with necessary groove cutting including preparation of new tiling surface and applying two coat of cement base paint over a coat of primer and making good the surfaces to receive new work upto a height of exceeding 3.5 metre not including 7.0 metre including necessary scaffolding etc as required complete all as directed.

Taking down existing brick pattern tiles of size 200 x 58mm x15mm as in wall cladding and filling with rendering of necessary thickness in cement mortar 1:4 to match the existing brick pattern tiles with necessary groove cutting including preparation of new tiling surface and applying two coat of cement base paint over a coat of primer and making good the surfaces to receive new work upto a height of exceeding 7.00 metre not including 11.00 metre including necessary scaffolding etc as required complete all as directed.

Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples fixed in repair complete all as specified & directed.

Rendering 15mm thick plaster in patches not exceeding 3.00 Sqm each patch on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water and removing proofing compound as per manufactures instructions, taking down old plaster raking out joints hacking for key scrubing down with water and removeing rubbish off the debris from the site to a distance exc 250mtr to 500mtr including necessary scaffolding complete all as specified and directed, (work to be carried out upto 7.5mtr height.) Note- WPC will be measured paid as supply only under respective items separetely.

Rendering 15mm thick plaster in patches not exceeding 3.00 Sqm each patch on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, taking down old plaster raking out joints hacking for key scrubing down with water and removing rubbish off the debris from the site to a distance exc 250mtr to 500mtr including necessary scaffolding complete all as specified and directed, (work to be carried out above 7.5mtr height and upto 15mtr hight) Note- WPC will be measured paid as supply only under respective items separetely.

Taking down existing water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation and treating construction joints, filling of honey combs, preparation of coving (if required) with Asian SmartCare Repair Mortar and Asian SmartCare General Purpose Grout of Asian Paints or equivalent product of Thermax/ FOSROC (b) Cleaning the surface and applying Asian PU Magnum Primer Resin & Hardner of Make Asian paints or equivalent product of Thermax/ FOSROC on the cleaned surface (c) Applying Asian SmartCare PU Magnum of Make Asian paints in 2 layers (PU Magnum per coat should be minimum 600 gms per Square meter in each layer) or equivalent product of Thermax/ FOSROC (d) Ponding test for 72 Hrs and no leakage/seepage observed. Any rectification to be done at the cost of contractor by repeating above steps of application. (e) The work shall be carried out complete as per manufacture's specifications and application methodology.

2nd class hard wood plain fillets, sectional area 6 sq cm & not exceeding 13 Sq cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads, fixed in repair complete all as specified & directed.

Sharda Enterprises

M/s RK ENTERPRISES

Aron Water Proofing and Pest Control

M/s caspur construction company

M/S Manmohan Singh Anand

M/S Anil kumar