Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹48.3 L+₹4.1 L (9.25%)Rejected-Finance 43 VIMAL ENCLAVE CHAMRAULI MODE SHAMSHABAD ROAD AGRA UP 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹48.9 L+₹4.7 L (10.7%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/s Yash Trading Company L1 | VINYAK TRADERS L3 | S S TRADERS L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply & installation as in replacement of 3 way mixing valve modulating type spring return mixing valves of size 100mm size with electro hydraulic motorised actuator, 200 to 240 V 3 wire along with temperature controller other standard accessories and matching flanges shut off pressure Dps= 7 bar, pressure class Pu=10 bar complete all as specified and directed. Make :- Honeywell Sl No-CN7220A2007 or any equivalent make. | 3 | Each | 17,215 ₹51,645 Lowest | 20,000 ₹60,000 | 20,000 ₹60,000 |
| 2.00 | Supply, Installation as in replacement of Glycerin filled pressure gauge with gauge cock having Case & Bazel Ring : SS - 304 Snap action Bayonet type, Bourdon & Movement : SS - 304, Pressure Element : SS - 316, Protection Degree: IP-67 as per IEC 529, Socket : SS - 304, Ambient Temp: 10°C ~ 45°C, Window : Toughened Glass, Mounting : Bottom Centre, Accuracy Class: 1.6 as per EN 837-1, Nominal dia size: 100 mm, Pointer: Not adjustable, Aluminum Black, Gauge cock should be in stainless steel with threaded connection suitable for nominal pressure of 16 Bar complete all as specified and directed Connection size : 1/4" BSP. Make : Dwyer / Forbes Marshall / Warrie / Wika | 30 | Each | 2,000 ₹60,000 Lowest | 2,000 ₹60,000 Lowest | 3,500 ₹1,05,000 |
| 3.00 | Supply, Installation as in replacement of Steam Type Thermometer, case and bezel moc shall be cast aluminum 304, weather proof as per IP - 65 mm. Immersion length around 200 mm, Connection 1/2" BSP with SS 304 thermowell dully filled with glycerin/ equivalent complete all as specified and directed. | 40 | Each | 5,500 ₹2,20,000 | 1,500 ₹60,000 Lowest | 5,500 ₹2,20,000 |
| 4.00 | M&L for opening burnt out monoblock centrifugal pump set vertical/horizontal type after disconnect all electric/water supply connections of any type/model of capacity 5 HP and cutting the U/S copper winding and rewinding the same with copper wire of existing gauge/size and insulation complete including replacement of all nut bolts of existing size and testing after installation the pumpset all as specified and directed by Engr-in-Charge. | 10 | Each Job | 6,000 ₹60,000 | 12,000 ₹1,20,000 | 5,000 ₹50,000 Lowest |
| 5.00 | All as per item No 4 above but of capacity 3 HP as per existing make and model of same size. | 3 | Each | 4,000 ₹12,000 Lowest | 10,000 ₹30,000 | 4,000 ₹12,000 Lowest |
| 6.00 | All as per item No 4 above but of capacity upto 2 HP as per existing make and model of same size. | 3 | Each | 3,000 ₹9,000 Lowest | 8,000 ₹24,000 | 3,000 ₹9,000 Lowest |
| 7.00 | All as per item No 4 above but of capacity 7.5 HP as per existing make and model of same size. | 3 | Each | 7,500 ₹22,500 Lowest | 20,000 ₹60,000 | 7,500 ₹22,500 Lowest |
| 8.00 | All as per item No 4 above but of capacity 10 HP as per existing make and model of same size. | 3 | Each | 9,000 ₹27,000 Lowest | 22,000 ₹66,000 | 9,000 ₹27,000 Lowest |
| 9.00 | Supply & installation of supply/return air square ceiling anti-smudge diffusers having neck size 450mm X450mm , flush mounting, suitable for 4 way throw, core removable type, powder coated with opposed blade damper. The frame and core shall be constructed from high quality aluminium quality profile with necessary hardware complete all as specified and directed. | 8 | Each | 2,200 ₹17,600 Lowest | 5,500 ₹44,000 | 2,200 ₹17,600 Lowest |
| 10.00 | All as per item No 9 above but of size 375mmx375mm. | 8 | Each | 2,200 ₹17,600 Lowest | 4,500 ₹36,000 | 2,200 ₹17,600 Lowest |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
7 Jan 2026, 6:00 pmClosed
CWE (AF) BAREILLY
HQ Commander Works Engineers (AF) Military Engineer Services Bareilly 243002
As described in BOQ
2025_MES_745316_1
81611/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (AF) BAREILLY
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) BAREILLY
₹92,000
27 Feb 2026
19 Dec 2025
15 Jan 2026
19 Dec 2025
7 Jan 2026
2 Jan 2026
Supply & installation as in replacement of 3 way mixing valve modulating type spring return mixing valves of size 100mm size with electro hydraulic motorised actuator, 200 to 240 V 3 wire along with temperature controller other standard accessories and matching flanges shut off pressure Dps= 7 bar, pressure class Pu=10 bar complete all as specified and directed. Make :- Honeywell Sl No-CN7220A2007 or any equivalent make.
Supply, Installation as in replacement of Glycerin filled pressure gauge with gauge cock having Case & Bazel Ring : SS - 304 Snap action Bayonet type, Bourdon & Movement : SS - 304, Pressure Element : SS - 316, Protection Degree: IP-67 as per IEC 529, Socket : SS - 304, Ambient Temp: 10°C ~ 45°C, Window : Toughened Glass, Mounting : Bottom Centre, Accuracy Class: 1.6 as per EN 837-1, Nominal dia size: 100 mm, Pointer: Not adjustable, Aluminum Black, Gauge cock should be in stainless steel with threaded connection suitable for nominal pressure of 16 Bar complete all as specified and directed Connection size : 1/4" BSP. Make : Dwyer / Forbes Marshall / Warrie / Wika
Supply, Installation as in replacement of Steam Type Thermometer, case and bezel moc shall be cast aluminum 304, weather proof as per IP - 65 mm. Immersion length around 200 mm, Connection 1/2" BSP with SS 304 thermowell dully filled with glycerin/ equivalent complete all as specified and directed.
M&L for opening burnt out monoblock centrifugal pump set vertical/horizontal type after disconnect all electric/water supply connections of any type/model of capacity 5 HP and cutting the U/S copper winding and rewinding the same with copper wire of existing gauge/size and insulation complete including replacement of all nut bolts of existing size and testing after installation the pumpset all as specified and directed by Engr-in-Charge.
All as per item No 4 above but of capacity 3 HP as per existing make and model of same size.
All as per item No 4 above but of capacity upto 2 HP as per existing make and model of same size.
All as per item No 4 above but of capacity 7.5 HP as per existing make and model of same size.
All as per item No 4 above but of capacity 10 HP as per existing make and model of same size.
Supply & installation of supply/return air square ceiling anti-smudge diffusers having neck size 450mm X450mm , flush mounting, suitable for 4 way throw, core removable type, powder coated with opposed blade damper. The frame and core shall be constructed from high quality aluminium quality profile with necessary hardware complete all as specified and directed.
All as per item No 9 above but of size 375mmx375mm.
M&L for taking out burnt out copper cable of size 4 Sqmm to 35 Sqmm from wall complete all as specified and directed by Engr-in-Charge.
M & L for PVC insulated electric copper cable of size 16 Sqmm 3.5 core including saddles & screws and laying in cable lay trunk perfectly complete all as specified and directed.
M & L for PVC insulated electric copper cable of size 25 Sqmm 3.5 core including saddles & screws and laying in cable lay trunk perfectly complete all as specified and directed.
M&L for PVC insulated electric copper cable of size 35 Sqmm 3.5 core including saddles, & screws and laying in cable lay trunk perfectly complete all as specified and directed.
M&L for PVC insulated electric copper cable of size 10.0 Sqmm 3.0 core including saddles & screws and laying in cable lay trunk perfectly complete all as specified and directed.
Supply and replacement of triple layer rotational molded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position of Capacity 5000 liters complete all as specified and as directed Make : Sintex / Plasto /aashirwad or equivalent.
Supply and laying MS pipe medium grade of size 100mm bore duly insulated by wire mesh and cement work under ground including excavation and returning filling complete all as specified and directed.
M&L for opening/dismantling existing Cooling Tower all parts with inlet/outlet water connections and replacement of all defected parts under relevant items and after repair reassemble all parts and cleaning/greasing complete all as specified and directed.
PVC Fills honey comp 6"x12"x24" complete all as specified and directed.
LPS Fills (Loose polypropylene Splash) complete all as specified and directed.
Tie Rod and turn Buckle(SS) complete all as specified and directed.
Galvanized wire mesh with wire of 1.40 mm dia, mesh size not less than 25 mm with nut bolts complete all as specified and directed.
Drift eliminator complete of cooling tower having quantity required as in above items complete all as specified and directed.
Motor with fan blade assembly complete as per recommended make suitable for above mentioned capacity complete all as specified and directed.
S & F in replacement of water sprinkler with branch pipes of cooling tower of capacity 15 TR to 40 TR to distribute the water properly inside the cooling tower complete all as specified and directed.
S&F in replacement of MCCB TPN adjustable thermal and adjustable magnetic setting of capacity 160 Amps 25 KA complete all as specified and directed.
All as per item No 20 above but of capacity 125 Amps 16 KA
All as per item No 20 above but of capacity 63 Amps 16 KA
All as per item No 20 above but of capacity 350 Amps 36 KA
All as per item No 20 above but of capacity 250 Amps 25 KA
S&F in replacement of MCCB, adjustable thermal and adjustable magnetic setting of capacity 25 to 100 Amps, 415V, three pole, 16 KA of existing frame at site complete all as specified and directed.
S&F in replacement 50 mm dia butterfly valve with rubber gasket and nut bolts with flange of AC chiller plant circulation pipe line, of existing model, welding the same as per existing fixing arrangements complete all as specified and directed.
All as per item No. 26 above but of size 80mm dia
All as per item No. 26 above but of size 100mm dia
S & F in replacement of GM gate valve ISI marked including cutting / threading and welding of existing GI pipe of size 50 mm dia complete all as specified and directed.
All as per item No. 29 above but of size 40 mm dia
All as per item No. 29 above but of size 25 mm dia
All as per item No 29 above but of size 20 mm dia
S & F in replacement strainer Y type 50 to 100 mm bore ISI marked including cutting / threading and welding of existing size and model with flanges etc GI Pipe complete all as specified and directed.
M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation for cooling tower etc, filling and mass concrete complete all as specified and directed.
M & L for providing plain cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate), as in pole coping and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
M&L for rendering 10mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces old or new all as specified and directed by engr-in charge.
Supply , assembly and erection in replacement of GI sheet with C & SS rectangular/square duct made out of 'L' shaped hollow profile, duly factory boxed, including all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete with two coat painting of size 24 Gauge all as specified and directed.
Supply , assembly and erection in replacement GI sheet with C & SS rectangular/square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc with two coat painting of size 22 Gauge complete all as specified and directed.
M & L for replacement of underdeck insulation for metal/Duct roof with bonded fibre glass wool of density 24 Kg/Cum, 50 mm thick, suitably factory laminated with aluminium foil backed up by scrim and kraft paper (FSK), facing with 50 mm projection complete all as specified and directed for overlap and butting comprising of the following:- (insulating material shall conform to BS - 476, Part 4,5, 6 & 7):- (a) Supply and fix 6 mm dia M S rods between purlins suitably for supporting the required thickness of insulation material beneath the metal roof. (b) Supply and fixing of 22 SWG GI wires supports for insulation. (c) Supply and fixing of chicken wire mesh 12.5 mm x 22 SWG of hexagonal construction below the insulation for supporting the same including taking down old same items.
M & L for replacement of Insulation of MS Pipe with PUF slab 30 mm thick with and including applying bituminous compound and GI cladding with 26 gauge GI sheet of bore of size 40mm MS Pipe complete all as specified and directed.
M & L for replacement of Insulation of MS Pipe with PUF slab 30 mm thick with and including applying bituminous compound and GI cladding with 26 gauge GI sheet complete of bore of size 50mm MS Pipe complete all as specified and directed.
M & L for replacement of Insulation of MS Pipe with PUF slab 40 mm thick with and including applying bituminous compound and GI cladding with 26 gauge GI sheet of bore of size 80mm MS Pipe complete all as specified and directed.
Supply and fixing of Hollow iron pipes/Angle Iron including cutting and welding/moulding in required shape all as specified and directed by Engr-In-Charge.
Supply and fixing of electronic Temperature and Humidity Meter -40 to 85 degree centigrade and humidity 5% to 95% of size 300x200x36mm with all connected items all as specified and directed. Make as per INSIZE Model 0314-H323B or equivalent.
Supply and fixing in replacement of copper tubing complete of size 1/2" X 3/4" in required length of best quality including cutting, brazing, flaring and testing complete all as specified and directed.
Supply and fixing in replacement of copper tubing of size 3/8" X 5/8" in required length of best quality including cutting, brazing, flaring and testing complete all as specified and directed.
Supply and fixing of copper tubing nitrile rubber insulation with tape of size 3/8" X 5/8" or 1/2" X 3/4" in required length of best quality on new and old copper pipes complete all as specified and directed.
Supply and fixing of copper tubing nitrile rubber insulation with tape of size 40/50mm MS Pipe in required length of best quality on new and old copper pipes complete all as specified and directed.
Supply and fixing of evaporator fan assembly in door unit of package type plant of capacity 11 TR as per existing make and model of voltas all as per specified and directed by Engr-in-Charge.
Opening of AHU(Air Handling unit) and taking down cover plate, disconnecting electric connections, and servicing/cleaning/descaling heat exchanger cooling coil of AHU and opening the blower motor, blower, belt, shaft and bearings (02Nos) for repair and refixing complete assembly with new ball bearings (02 Nos),Fan Belts(02 Nos) for 10 to 25 TR Capacity AHU after greasing complete all as specified and directed by Engr-in-Charge
Opening of AHU(Air Handling unit) and taking down cover plate, disconnecting electric connections, and servicing/cleaning of complete AHU and opening the blower motor, blower, belt, shaft and bearings (02Nos) for repair and refixing complete assembly with new ball bearings (02 Nos),Fan Belts(02 Nos) for 30 to 39 TR Capacity AHU after greasing complete all as specified and directed by Engr-in-Charge
Opening of AHU(Air Handling unit) and taking down cover plate, disconnecting electric connections, and servicing/cleaning of complete AHU and opening the blower motor, blower, belt, shaft and bearings (02Nos) for repair and refixing complete assembly with new ball bearings (02 Nos), Fan Belts(02 Nos) for 40 to 50 TR Capacity AHU after greasing complete all as specified and directed by Engr-in-Charge.
Supply only micro processor display controller with PCB board and all other internal parts complete box of capacity 24/25/26 TR central AC Plant unit as per existing make and model of Voltas/Blue Star/Accel all as specified and directed by Engr-in-Charge.
Supply only micro processor display controller with PCB board and all other internal parts complete box as per existing make and model of Voltas/Bluestar/Accel of capacity 32/37.5/39 TR central AC Plant unit of existing make Voltas all as specified and directed by Engr-in-Charge.
S&F in replacement of Filter Drier complete set of Existing Size and Model for 10 to 25 TR central AC Plants complete assembly all as specified and directed by Engr-in-Charge. Existing Make Danfoss
S&F in replacement Filter Drier complete set of existing size and model for 30 to 39 TR central AC Plants complete assembly all as specified and directed by Engr-in-Charge.
S&F in replacement of Filter Drier complete set of existing size and model for 40 to 50 TR central AC Plants complete assembly all as specified and directed by Engr-in-Charge.
S&F in replacement of old nut bolts with new stainless steel nut bolts with washer of required size all as specified and directed by Engr-in-Charge.
S&F cable connector with insulator material and Cu lugs of suitable size for copper cable of size 10 to 35 Sqmm single core size complete all as specified and directed.
M&L for rectifying the air conditioning plants any type of complaints of electric panel/Display/PCB Card/AC Panel/AHU/Evaporator/Condenser/Cooling Tower by AC plant Rep mechanic with one Helper will be rectify with in 08 Hrs, T&P will be provided by the contractor and items required will be measured and paid separately under relevant items. (Note- If complaint not rectified in 08 hrs a penalty of 100 Rs/Hr shall be imposed all as per direction of Engr-in-Charge.
S&F in Replacement of Danfoss commercial Compressor-scroll, Model No:SM 185-S4 RC 380 to 400 V 3 phase 50 HZ,Thermally protected, Lubricant mineral oil-160P, Refrigerant type R-22/R 407 of Cap-11 TR of Make- Danfoss/ Daikin/Carrier complete all as specified and directed. Note: (i)The compress
or should be installed by the authorised companies refrigerant mechanic. (ii)After successful installation, the compressor should be vaccumed by the nitrogen and desired pressure & leakage should be checked. (iv)The rate of first charge of refrigerant gas in the compressor to be quoted in the rate of compressor by the contractor.
Supply and laying or fixing on wall, on cable tray or passing through pipe of 95 Sqmm 3.5 Core size of 1100 Volts grade heavy duty XLPE armourade cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed nominal cross section stranded conductor including clamps and pipe of required size and length and other required material for fixing on wall complete all as specified and directed for the following Sizes
All as per item No. 63 above but 50 sqmm 3.5 core
All as per item No. 63 above but 35 sqmm 3.5 core
All as per item No. 63 above but 25 sqmm 3.5 core
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
81611Tender.pdf
Tender Documents • 1.35 MB
BOQ_834563.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .