Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.6 Cr
EMD Value
₹3.1 L
Closing Date
26 Oct 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender
UPLOADING OF THE CERTIFICATE:-The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure- V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP)etc., as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
DEFINATION OF SIMILIAR NATURE OF WORK:-Any work of EI / PI / RRI / 1.1.1 ABS/ IBH/ LC Gate interlocking work which include indoor and outdoor signalling work.
8 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All payment and other conditions are attached with tender document.
Although year of specification is given in the schedule, last amendment, if any, shall apply.
All tenderer must have valid GSTN number and rates must be inclusive of GST Act and itsamendment.
Compliance of GST act/rules & correction/modification issue by railway board with regard toGST act shall be binding on contractor & railway.
Genral instruction :- 1 The offer will be evaluated based on certificates enclosed with theoriginal offer only. The Railways will not enter into any correspondence to get thesecertificates subsequently and the offer shall be evaluated based on the documents submittedalong with the offer.2 Tenderer may please note that meeting of eligibility criteria is strictlybased on completion certificates issued by the executive in charge of work and not linkedwith mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways. 3 Tenderer may please note that fulfilling of eligibility clause shall beascertained only from the completion certificates issued by the executive-in-charge of workand mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways shall not be enough. It may also be noted that cognizance of thoseworks, which are nearing completion or have been almost completed, shall not be taken onlythose completion certificates, wherein successful commissioning satisfactory performanceof work have been clearly unambiguously acknowledged by Executive-incharge of anyRailway Unit or any Govt. Dept./Undertaking for any similar work shall be considered for thispurpose.4 Any variation to quantities in any item and its associated wiring material account ofsupply and installation will have to be born by the tenderer. Railway Engineer s decision inthis regard shall be final.5 All drawings related with the work can be obtained from the officeof DRM Kota on any working day during office hours.
S & T work in connectio with Sawai Madhopur Remodelling of goods yard line no. 1,2,3,4&5 to increase CSL of 730m.
KOTA-SNT-SIG-2026-16~WCR
KOTA-SNT-SIG-2026-16
Open
Works - General
12 Months
Kota, Rajasthan
₹0
₹3.1 L
30 Sept 2026
30 Sept 2026
12 Oct 2026
92 items across 3 schedules · ₹1,55,12,647.18 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Relay, AC Immune, plug-in-type, Style QNNA1, DC Neutral line, 24V 6F- 2B/4F-4B BRS:960, or QNA1 8F-8B / 12F-4B contacts BRS:931A, front and back contacts metal to carbon with plug board, retaining clips & connectors conforming to IRS: S60, IRS:S34 , IRS:S23, The relays of various contact configuration with quantity shall be specifeid at the time of execution. | Numbers | 44.00 | 5,757.5 | 2,53,330 |
| 2 | Supply of M to C QSPA1, 24VDC, Slow to pick up, 8F/4B along with plug board(Base 43 plate), retaining clip and connectors conforming to BRS:933A,IRS:S60 & IRS:S34.Code ABDEJ | Numbers | 22.00 | 6,091.41 | 1,34,011.02 |
| 3 | Supply of Relay Plug-in type, Style AC- LED All aspects, AC lamp proving relay unit with in- built current transformer type, slow release neutral line relay, 4F/4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110V AC, LED signal lamp rated at 15W confirming to RDSO pec STS/E/Reelys/AC lit LED signal/09-2002, BRS:941A, IRS: S- 34 & IRS: S- 23 (as applicable). The interlocking code for this unit shall be ABDHK Note: Base plate shall be inspected by consignee with OEM /Manufacturer testing & guarantee certificate. | Numbers | 10.00 | 8,601.78 | 86,017.8 |
| 4 | Supply of Key Lock Relay AC immunised with different ward combinations (Five extra sets of ward plates to be supplied with each relay). Siemens make working on 60V DC 4F/4B or equivalent (Extra No. of wards to be supplied with the consultation of Engineer in charge of work, as per requirement of site and no additional cost w i l l be paid for extra wards). The ward combination shall be A, B, C, D, E, F , G------- -Z. | Numbers | 5.00 | 10,148.88 | 50,744.4 |
| 5 | Relay, AC Immune, plug-in type, Style "QNA1K", Neutral line, 24V DC 1000 ohms 6F/6B or 4F-4B contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:931A, Code CDEKY/CDEKY | Numbers | 6.00 | 5,849.17 | 35,095.02 |
| 6 | Supply of powder coated Main Cable Termination rack complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal blocks/wagos, ladder, string rods, frame, base assembly, insulators, J-bolt, nut/bolts & fasteners, phenolic laminated sheet board etc. Siemens type & as per extant practice on W.C. Rly. Typical part list as per Annexure 'K' for 3-way and Annexure 'L' for 2-way attached and Rack arrangement as per WCR DRG. No. S&T EQPT. BLDG/2013/Pt. 1/4 and Rack plan as approved by Engineer incharge. | Set | 2.00 | 46,959.64 | 93,919.28 |
| 7 | (i) Supply of 4 conductor disconnect terminal block with test & measurement facility, with screw less, spring cage clamp connections suitabie for 0.08 to 2.5 Sq.mm conductor with current capacity of 16 Amps as per RDSO Spec. No. RDSO/SPN/189/2004 Ver. 3.0 or latest. | Numbers | 2500.00 | 66.79 | 1,66,975 |
| 8 | (ii) Supply of End plate compatible to above screwless terminals. The end plates shall be of different colour than that of disconnect terminal blocks. | Numbers | 80.00 | 12.87 | 1,029.6 |
| 9 | (iii) Supply of Din rail of dimension 35mm x 7.5mm, 1 mm thickness, 1Mtr length, slotted compatible to above terminals of WAGO or PHOENIX make. | Numbers | 25.00 | 115.99 | 2,899.75 |
| 10 | iv) Supply of End Stop 10mm for above Din 35 Rail. | Numbers | 180.00 | 11.37 | 2,046.6 |
| 11 | Supply of LED for shunt signal integrated type as per RDSO Specn. No RDSO/SPN/153/2023 Rev 5.0 | Numbers | 24.00 | 5,070.97 | 1,21,703.28 |
| 12 | Supply of Main Signal Post 140 mm outer dia 4.6 Mtr Length as per specification No. IRS: S-6 with latest amendment. | Numbers | 3.00 | 8,951.24 | 26,853.72 |
| 13 | Supply of Cast iron main signal surface base 140mm as per specification No. IRS: S- 10 and Drg No. S-2011/M with latest amendment, with CLS Ladder assembly complete and ladder base for CLS signal 3.6 mtrs/ 4.6 Mtrs./ 5.6 Mtrs. long as per RDSO Drg. No. SA-23150/23153/23156 (Adv.) with latest amendment. This also include, signal front & Back staging complete assembly for CLS unit as per Drg. No. RST/11413. | Numbers | 3.00 | 13,922.47 | 41,767.41 |
| 14 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23003A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. | Numbers | 2.00 | 23,636.24 | 47,272.48 |
| 15 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area THREE Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23002A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. | Numbers | 1.00 | 24,761.77 | 24,761.77 |
| 16 | Supply of Shunt Signal Post complete with Base. GI Pipe, 'B' class of 80mm Dia. of min. 1 meter length to be supplied by the contractor. | Numbers | 8.00 | 3,564.2 | 28,513.6 |
| 17 | Supply of position light LED based shunt signal unit (as per RDSO Drg. No. SA- 23840). | Numbers | 8.00 | 12,613.89 | 1,00,911.12 |
| 18 | Supply of Off-Set bracket 5-1/2 '' for Signals & Routes as per Specification No. IRS: S- 10/78 and Drg no. SA-23080(Adv) Alt-1 or with latest amendment. | Numbers | 3.00 | 1,317.07 | 3,951.21 |
| 19 | Supply of Off-Set bracket 3-1/2 '' for Shunt signal unit. | Numbers | 8.00 | 588.32 | 4,706.56 |
| 20 | Supply of Retro Reflective Signal no. plates with signal no. as per IRSEM 2021 Drg. No. 19-D10 with clamps,nut bolts and other accessories required for fixing. | Numbers | 11.00 | 646.65 | 7,113.15 |
| 21 | Supply of Pad Locks with common key make Godrej / Navtal only. | Numbers | 22.00 | 353.02 | 7,766.44 |
| 22 | Supply of round head type non detoriating type low voltage cartridge fuse / PPTC fuses specn No. IRS/S/78/92 with latest amendments 2A/4A/6A/10A capacity. The no of fuse and req capacity of fuse shall be given by engineerer at the time of execustion. | Numbers | 26.00 | 108.26 | 2,814.76 |
| 23 | Supply of Resettable fuse, type Polymeric Positive Temperature Coefficient (PPTC) Fuse of make Littlefuse/Fuzetec,/Tyco/ Bourn/Raychem. Suitable fuses with trip current shall be supplied as per requirement. | Numbers | 30.00 | 12.55 | 376.5 |
| 24 | Supply of Electric point machine, Non trailable, internal locking, No. 220 mm throw, with IP67 motor ,Minimum AC immunity 440 VAC, with tools & complete accessories including complete ground connection and all insulation, crank handle and along with ciamp point lock 60 kg, TWS as per Drg No. RDSO/S- 11000 as-per RDSO SPN. IRS:S 24/2002 with Amd, 01 or latest. ACCEPTED MAKE/BRAND: Vossloh | Numbers | 3.00 | 1,32,688.64 | 3,98,065.92 |
| 25 | Supply of Electric Point Machine IRS make 110V DC operation (AC immunity 160V) NONTRAILABLE, complete with lock, detector, cable termination box and slides for lock and detector (Rotary locking) as per specification no. IRS: S-24/2002 amendment-1 or latest, requirement of point machine is 143 mm throw only as per RDSO Drg. No RDSO/S-10800. | Numbers | 6.00 | 72,527.41 | 4,35,164.46 |
| 26 | Supply of Ground Connection complete set suitable for IRS type Point machine for ordinary turnout of 60 Kg rails as per RDSO Drg. RDSO-S-3361. | Numbers | 6.00 | 11,205.57 | 67,233.42 |
| 27 | "Supply of William stretcher nylon insulation Set suitable for ground connection for motor point operation. Each set comprising of - (RDSO Drg. No.) T- 10367-1 no.,T-10368- 2 nos., T-10371- 4 nos. and conforming to the Specification IRS: S-23 & 40/84 with latest Amendment." | Set | 18.00 | 650.91 | 11,716.38 |
| 28 | Supply of Gauge Tie plate nylon insulation as per RDSO Drg. No. (T-10372- 1 no., T- 10368- 3 nos., T-10371- 6 nos. in each set) and to the Specification IRS: S-23 & 40 with latest Amendment as applicable. | Set | 18.00 | 297.82 | 5,360.76 |
| 29 | Supply of PVC indoor cable 1x24x1 mm dia colour coding of insulation of inner core shall be in six colour viz. Blue, Red, Green, Grey, Brown & Black conforming toIRS 76/89 or latest. | Kilometre | 1.00 | 1,91,909.15 | 1,91,909.15 |
| 30 | Supply of Thermo shrink Jointing Kit for jointing underground 0.9 mm dia. cond. 4/6 quad cables as per specn No. IRS: TC- 77/2012 (Rev.3.0) with Amend. 1, 2 & 3 or latest. | Numbers | 4.00 | 3,402.91 | 13,611.64 |
| 31 | Supply of Pre-wired Crank Handle cum Key Lock Relay box (of metal) along with accessories viz. LEDs, with approved type push buttons, terminal strips, string rod, etc. as per Drg. No. Dy.CSTE/C/Kota/6 (A) & (B). | Numbers | 4.00 | 12,049.6 | 48,198.4 |
| 32 | Supply of Double Walled Corrugated (DWC) pipe made up of High Density Poly Ethylene (HDPE) of size 103/103.5 mm inner dia and 120 mm outer dia in 6 Mtr straight length as per Britsh Standard No. BSEN 50086-1 and BSEN 50086-2-4 and BIS draft Specification Doc No. ETD 14(5071) and ETD 14(5072) along with one coupler per every 6 meters. | Metre | 150.00 | 492.23 | 73,834.5 |
| 33 | Supply of Earth Electrode assembly as per Drg. No. S&T/CON/KOTA/EARTHING/01 ALT - 01. All nut, Bolts & Lugs to be of stainless steel. The earth electrode pipe shall be 'B' Class/ Medium Grade as per Specification No. IS: 1239 Pt. 1/ 2004 of Nominal Inner Dia 50mm, Outside dia (Max 60.8 mm, Min 59.7 mm), Thickness (3.6mm), Tolerance in Thickness ('+' not limited, '-' 12.5 percent). | Numbers | 15.00 | 1,313.36 | 19,700.4 |
| 34 | Supply of 24-fiber optic fiber straight joint enclosure (SJC) complete with all accessories of make TVSE R&M model No. 1500-L183-XX or Raychem make model No. FOSC100-BH -A-SJN-2-L-24 or 3 M make model No. BPEO-Type 1-24F or 2179CS-24F. | Numbers | 3.00 | 4,148.11 | 12,444.33 |
| 35 | Supply of HDPE duct 40/33 MM as per TEC GR/CDS/08-02 NOV- 04 along with following accessories | Kilometre | 0.40 | 59,152.11 | 23,660.84 |
| 36 | Supply of Track feed Battery chargers, 110V AC as per specification No. IRS: S- 89/2013 ver. 1.0 or latest. Chargers shall be of 10 Amp output capacity suitable for charging 80 AH battery and 2/ 3/ 4 no. of cells with potential free contact. | Numbers | 10.00 | 2,249.71 | 22,497.1 |
| 37 | Supply of adjustable Track Feed Resistance disc type 30 Ohm as per RDSO Drg. No. SA- 20161-66/M (Adv) with latest Amendment with phenolic moulded base. | Numbers | 10.00 | 1,259.78 | 12,597.8 |
| 38 | Supply of 'B' type 120 ohms impedence choke to specn. No. IRS.S.65/83 (Amndt-3) or latest. | Numbers | 10.00 | 3,584.31 | 35,843.1 |
| 39 | "Supply of Low Maintenance Lead Acid Secondary Cell 2V, 80 AH as per Specification IRS: S-88/2004 with latest amendments. Cells should be supplied with microporous vent plug cum sealed floats, lead coated inter cell connectors, lead coated brass nut bolts & washers in dry and uncharged condition." | Numbers | 40.00 | 1,948.18 | 77,927.2 |
| 40 | Supply of Relay, AC immune, Plug-in type, style QTA2 relay, DC Neutral track, Relay 9 Ohms, 2F/1B contacts, metal to carbon, complete with plug board, retaining clip and connectors conforming to BRS: 939A, BRS: 966 (Appendix F2) IRS: S-34 & IRS: S- 23 as applicable. Code FGHKX | Numbers | 10.00 | 4,803.74 | 48,037.4 |
| 41 | Supply of Track Lead Junction Box as per Drg. No. JBP/S&T/C/106/I & II made from fiber glass, along with terminal blocks & links. The TLJB should be BLACK in colour. | Numbers | 20.00 | 1,025.02 | 20,500.4 |
| Schedule total | ₹27,62,883.67 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TD SIG 2026 16
ATTACHMENT
TDKOTA-SNT-SIG-2026-16-UPLOAD_.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .