GENERAL GURUVAYUR MUNICIPALITY 2024-25 PRO NO 613/25 MAZHUVANCHERY MANAPPADI ROAD TARRING-WARD 43 General Civil Work

Amount

Road Re-Tarring

3.15.1:Compacting Original Ground (i) Compacting original ground supporting embankment Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1.

4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using Gravel mix soil.

4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead

75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

75.5.2.3pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

OD426399/2024-2025:Mix Seal Surfacing-Manual Means-Type A-Bitumen S-65 using shredded plastic providing,laying and rolling of close graded premix surfacing material of 20mm thickness composed of 11.2mm to 0.9mm(Type-A) or 13.2mm to 0.9mm(Type-B) aggregates coated with shredded plastic(3% by weight of bitumen)as per standard using penetration grade bitumen to required line,grade and level to serve as wearing course on a previously prepared base,including mixing in a suitable plant,laying and rolling with a three wheel 8-10kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means:-Type A(II) Bitumen (S-65)

P Nandakumar (BID ID -2105339)

Sudheerkumar (BID ID -2106198)

E.K.Sathyajith (BID ID -2105874)

Bidder Name

E.K.Sathyajith

P Nandakumar

P.SUNILKUMAR

Sudheerkumar