REPAIR TO ROOF SHEET, FALSE CEILING AND PVC PANELING AT ZONE-I LANSDOWNE

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed .

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed .

S&F for 0.63 mm thick galvanised zinc coated @ 120 gm / Sqm, corrugated mild steel sheeting in roof with two corrugations side lap fixed coach screws and washers , in roofs walls etc with grade of zinc coating 275 complete all as specifed and as directed.

All as per item No 04 here in above but except sheets and providing & fixing with new ‘L’ or ‘J’ type hook and washers complete all as specifed and as directed.

S&F for 0.63 mm thick plain galvanised mild steel sheeting using grade ‘O’ sheets with 120 gm Zinc (Spelter) coating Per Sqm both sides inclusive, as in ridges, hips, valley gutters, drip and straight flashing fixed with ‘L’ or ‘J’ type hook and washers complete all as specified and directed.

S&F in repairs E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper incl making good all the disturbed portion complete all as spd & directed by GE/Eng-in-Charge.

S&F in repairs PVC Panneling with PVC panels of 9mm thick and 250mm wide interlocked type incl angle or channels and necessary fitting as rawl plugs,screws,adhesive etc allas spd.& directd.by GE/ Engr-in -charge.

M&L for PCC 1:2:4 type B0 (using 12.5 mm aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed.

S&F for sheet glass 5.50 mm thick tinted quality and glazing complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S & F for 20 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails as in roofs, ceiling, partition, fascia, barge, soffit etc. (except flooring and skirting) complete all as specified and directed.

Taking down cement plaster, any desription on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Material & labour for Rendering 15 mm thick CM 1:4 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed..

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specifed and as directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:4.all as specified and directed by the Engr-in-Charge

All as per item No 16 here-in-before, but except bricks complete all as specifed and as directed.

M&L for preparing of new plastered surface of walls and applying two coat of weather resistant paint (Apex/Weather coat) painting (approved shade) over a priming coat, complete all as specified and directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L for Preparation of new zinc or galvanised surface to receive painting,by coating with modrant solution including washing ,cleaning etc and applying two coats of synthetic enamel paint complete all as specified and directed.

DHSGroup

M/s Candid Mask Networks Pvt Ltd

NAND KISHORE ANIL KUMAR

RAMAPATI ENGINEERING SERVICES

R P G ELECTRONIC REGD