CONSTRUCTION OF URBAN POLICE STATION (B+G+4) AT ANANDNAGAR, Dist.-AHMEDABAD(INCLUDING ELECTRIFICATION AND FIRE FIGHTING SYSTEM ) (First attempt) (SBD)

Name Of Work:- Construction Of Urban Police Station (B+G+4) at Anandnagar , Dist. Ahmedabad. ( Including Electrification & Fire Fighting System )

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for Rs.

Item No. Description of Item Qty. Unit In Figure In Word Amount

1 Excavation for foundation in loose or soft soil upto 1.5 m. depth including sorting out and stacking of 1781.00 CMT 115.92 RS: One Hundred Fifteen and Paise

useful materials and disposing of the excavated stuff upto any Lead and lift. Ninty Two only

2 Excavation for foundation in dense or hard soil 1.5 m. to 3.0 m depth including sorting out and stacking of 1394.00 CMT 160.77 RS: One Hundred Sixty and Paise

useful materials and disposing of the excavated stuff upto any Lead and lift. Seventy Seven only

3 Excavation for foundation indense or hard soil 3.0 m. to 5.0 m depth including sorting out and stacking of 1659.00 CMT 172.50 RS: One Hundred Seventy Two and

useful materials and disposing of the excavated stuff upto any Lead and lift. Paise Fifty only

4 Excavation for foundation in dense or hard soil MORE THAN 5.0 m depth including sorting out and 1354.00 CMT 193.41 RS: One Hundred Ninty Three and Paise

stacking of useful materials and disposing of the excavated stuff upto any Lead and lift. Forty One only

5 Provinding and Laying controlled cement concrete M-150 including finising smooth with curing complete 120.00 CMT 3991.94 RS: Three Thousand Nine Hundred Ninty

including the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give One and Paise Ninty Four only

a fair finish but excluding the cost of reinforced concrete work in in Foundation and Plinth

6 Providing and laying cement concrete 1:3:6 (1- cement : 3- coarse sand : 6- hand broken stone 29.00 CMT 2976.00 RS: Two Thousand Nine Hundred Seventy

aggregates 20 mm. nominal size) and curing complete excluding cost of from work in : (a) Foundation and Six only

7 Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone 133.00 CMT 2653.67 RS: Two Thousand Six Hundred Fifty

aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Three and Paise Sixty Seven only

8 Providing and laying cement concrete 1:5:10 (1-cement;5-coarse sand;10-graded stone aggregate of 4.00 CMT 2492.51 RS: Two Thousand Four Hundred Ninty

40mm nominal size) and curing etc.complete excluding cost of formwork in foundation and plinth. Two and Paise Fifty One only

9 Provinding and Laying controlled cement concrete M-200 including finising smooth with curing complete 12.00 CMT 4331.77 RS: Four Thousand Three Hundred Thirty

including the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give One and Paise Seventy Seven only

a fair finish but excluding the cost of reinforced concrete work in foundationFOOTING and Mass Concrete.

Item No. Description of Item Qty. Unit In Figure In Word Amount

10 Provinding and Laying controlled cement concrete M-200 & including finising smooth with curing complete 9.00 CMT 8974.83 RS: Eight Thousand Nine Hundred

including the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give Seventy Four and Paise Eighty Three only

a fair finish but excluding cost of reinforcement for R.C.C work in COLUMN UP TO PLINTH for any cross

sectional area of Column.

11 Provinding and Laying controlled cement concrete M-200 & including finising smooth with curing complete 12.00 CMT 6926.07 RS: Six Thousand Nine Hundred Twenty

including the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give Six and Paise Seven only

a fair finish but excluding cost of reinforcement concrete for PLINTH BEAM for any cross sectional area of

12 Provinding and Laying controlled cement concrete M-200 and with curing etc.complete. Including the cost 6.00 CMT 5911.20 RS: Five Thousand Nine Hundred Eleven

of formwork of Plywood only with fair finish & Proping must be of steel only so as to give a fair finish but and Paise Twenty only

excluding the cost of reinforcement for R.C.C work in Coping & Lintel Bend.

13 Providing & laying Controlled cement concrete M-250 and curing complete Including the cost of form work 5.00 CMT 4595.51 RS: Four Thousand Five Hundred Ninty

of Plywood only with fair finish & Proping must be of steel only so as to give a fair finish. but excluding the Five and Paise Fifty One only

cost of reinforcement in column FOOTING base of columns and Mass concrete. Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

14 Provinding and laying Controlled cement concrete M-250 and finishing smooth with curing etc. complete 4.00 CMT 9014.12 RS: Nine Thousand Fourteen and Paise

including the cost form work of Plywood only with fair finish & Proping must be of steel only so as to give a Twelve only

fair finish. but excluding the cost of reinforcement for RCC work in COLUMN upto PLINTH.Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

15 Providing and laying Controlled cement concrete M-250 and finishing smooth with curing etc.. complete 4.00 CMT 7052.93 RS: Seven Thousand Fifty Two and Paise

Including the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give Ninty Three only

a fair finish. but exculding the cost of reinforcement for PLINTH BEAMS.Rates are Inclusive of Providing

and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

16 Providing & laying Controlled cement concrete M-300 and curing complete Including the cost of form work 877.00 CMT 4757.89 RS: Four Thousand Seven Hundred Fifty

of Plywood only with fair finish & Proping must be of steel only so as to give a fair finish. but excluding the Seven and Paise Eighty Nine only

cost of reinforcement in FOOTING base of columns and Mass concrete. Rates are Inclusive of Providing

and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

17 Provinding and laying Controlled cement concrete M-300 and finishing smooth with curing etc. complete 86.00 CMT 9176.50 RS: Nine Thousand One Hundred Seventy

including the cost form work of Plywood only with fair finish & Proping must be of steel only so as to give a Six and Paise Fifty only

fair finish. but excluding the cost of reinforcement for RCC work in COLUMN upto PLINTH.Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

Item No. Description of Item Qty. Unit In Figure In Word Amount

18 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 40.00 CMT 8194.90 RS: Eight Thousand One Hundred Ninty

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Four and Paise Ninty only

as to give a fair finish. but excluding the cost of reinforcement in SHEAR WALL for BASEMENT

FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

19 Provinding and Laying controlled cement concrete M-300 and with curing etc.complete. including the cost 207.00 CMT 9717.79 RS: Nine Thousand Seven Hundred

form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair finish. but Seventeen and Paise Seventy Nine only

excluding the cost of reinforcement for R.C.C work in WALLS having any cross section area of Wall

20 Provinding and Laying controlled cement concrete M-300 and with curing etc.complete. including the cost 40.00 CMT 8145.57 RS: Eight Thousand One Hundred Forty

form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair finish. but Five and Paise Fifty Seven only

excluding the cost of reinforcement for R.C.C work IN vertical fins/Padadi inside of sump walls for all floor

one side shuttering

21 Filling avaliable excavate earth ( excluding rock). In trenches, plinth sides of foundations etc. in layers not 3033.40 CMT 129.10 RS: One Hundred Twenty Nine and Paise

exceeding 20 cms. In depth consolidation each deposited layer by ramming and watering. Ten only

22 Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. 558.00 SMT 88.40 RS: Eighty Eight and Paise Forty only

complete. Using Imidacloprid 30.5 SCas as Per 6313part -II (0.075 % concentration by mass) is

recommended 10.5 ml chemical diluted with 5 litres of water application 0.5 litre chemical/Sqm if surface is

recommended as per I.S..

23 FILLING in plinth with SAND under floors including watering, raming consolidating and dressing etc. 84.00 CMT 455.63 RS: Four Hundred Fifty Five and Paise

complete. Sixty Three only

24 Filling In Foundation & Plinth With Murrum Or Selected Soil In Layers Of 20Cms Th. Inclu.. Watering , 178.00 CMT 286.20 RS: Two Hundred Eighty Six and Paise

Ramming & Consolidating Etc.. Complete Twenty only

25 Providind & Laying Controlled Cement Concrete M-250 and curing complete excluding cost of form work 109.00 CMT 4238.04 RS: Four Thousand Two Hundred Thirty

and reinforcement for reinforced concrete work in (A) Foundations, Footings, Base of Columns and Mass Eight and Paise Four only

Concrete.(GRID SLAB @ Basement)

26 Providing and laying Controlled cement concrete M-300 including finishing smooth for R.C.C. STAIR CASE 8.00 CMT 8325.25 RS: Eight Thousand Three Hundred

including the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give Twenty Five and Paise Twenty Five only

a fair finish.and curing etc. Complete excluding cost of reinforcement in at BASEMENT FLOOR. Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

27 Providing and laying Controlled Cement Concrete M-300 for R.C.C. BEAMS having any cross sectional 47.00 CMT 8921.69 RS: Eight Thousand Nine Hundred Twenty

area complete Including the cost of form work of Plywood only with fair finish & Proping must be of steel One and Paise Sixty Nine only

only so as to give a fair finish. but excluding the cost of reinforcement for BASEMENT Floor. rates are

inclusive of providing and mixing plasticizer of approved make in proportion as per mix design.

Item No. Description of Item Qty. Unit In Figure In Word Amount

28 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 76.00 CMT 7864.99 RS: Seven Thousand Eight Hundred Sixty

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Four and Paise Ninty Nine only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 13cm and upto

15cm for BASEMENT FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make &

In Proportion As Per Mix Design.

29 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 11.00 CMT 7584.99 RS: Seven Thousand Five Hundred Eighty

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Four and Paise Ninty Nine only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 16cm and upto

18cm for BASEMENT FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make &

In Proportion As Per Mix Design.

30 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTEL including finishing smooth with 3.00 CMT 8611.26 RS: Eight Thousand Six Hundred Eleven

curing etc. Including the cost of form work of Plywood only with fair finish & Proping must be of steel only so and Paise Twenty Six only

as to give a fair finish. but excluding the cost of reinforcement for BASEMENT FLOOR. Rates are Inclusive

of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

31 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTELBEND including finishing 2.00 CMT 6112.87 RS: Six Thousand One Hundred Twelve

smooth with curing etc. Including the cost of form work of Plywood only with fair finish & Proping must be of and Paise Eighty Seven only

steel only so as to give a fair finish. but excluding the cost of reinforcement for BASEMENT FLOOR. Rates

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

32 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. 59.00 CMT 3981.21 RS: Three Thousand Nine Hundred Eighty

in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional One and Paise Twenty One only

33 Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and finished 600.00 SMT 199.88 RS: One Hundred Ninty Nine and Paise

even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat cement at Eighty Eight only

BASEMENT Floor.

34 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior 964.00 SMT 203.34 RS: Two Hundred Three and Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating Thirty Four only

coat of neat cement slurry at BASEMENT FLOOR.

35 Provinding 10 mm thick cement PLASTER in single coat of interior plastering and finished even and 869.00 SMT 183.13 RS: One Hundred Eighty Three and Paise

smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating coat of neat cement slurry Thirteen only

including providing and mixing WATER PROOFING material in C.M in proportion recomended by the

manufacturer including finishing with a flaoting coat of neat cement slurry at Basement upto Plinth floor

Item No. Description of Item Qty. Unit In Figure In Word Amount

36 Integral Crystalline Waterproofing admixture cementitious dry powder consisting of hydrophilic chemicals, 1029.00 CMT 940.74 RS: Nine Hundred Forty and Paise

when added directly to the plastic mix will permanently create impermeable hardened concrete by Seventy Four only

developing insoluble hydration needle like crystals when comes in contact with unhydrated cement and

moisture to seal the pores, intercises, micro cracks in the concrete by reacting with the un-hydrated cement

particles . It will self-seal the cracks upto 0.5 – 0.6mm .Chloride content shall be within the permissible limit

as stated in IS 9103/ IS 6925-73 (Guideline). It shall confirm to ASTM C 494-Type D standards and

certified by the International Code Council Evaluation Service (ICC-ES). It shall be compatible to any other

concrete admixture confirming to ASTM C 494 and IS 9103. The material shall be ISI Marked.

The crystalline treated concrete will with stand high hydrostatic pressure.When tested Krystol Internal

Membrane (KIM) treated concrete passed the Permeability test as per US Army Corps of Engineers CRD

C-48-92 (For 140 M water head) and DIN 1048-Part 5 (For 163.19 M water head).It does not contain oils,

stearates, sodium, any silicates or talc and should not be hydrophobic. It should be able to grow crystals

year after year to bridge micro cracks (not live/moving cracks) that may occur from time to time. In order to

produce crystals to fill up the pores the crystalline product will not be dependent on the presence of free

lime in hardened concrete. It will minimize shrinkage cracks and help in internal curing.

It will be ne nontoxic and confirming to NSF (USA) certification for use of structure holding potable water,

based on testing in accordance with NSF 61 & US Environmental Protection Agency. Dosage will be

recommended by the manufacturer and shoul be in between 0.8 % by weight of cement. Considering

cement content as 410 Kg per Cum of concret for M30 grade concrete.

37 Providing and applying dry shake waterproofing system by sprinkling cementitious crystalline powder dry 1372.00 SMT 408.54 RS: Four Hundred Eight and Paise Fifty

shake over the stitch slab @ 1kg/m2 on the wet stitch slab concrete and finishing the same with concrete Four only

float. Cementitious based dry crystalline powder capable of creating needle like crystals to seal the pores,

intecises, microcracks in the concrete. This system become integral part of concrete and is not affected by

surface wear and abrasion. This will be applied on wet saturated, new or old concrete surfaces.

Cementitious crytslline are non-toxic and suitable for application in drinking water tanks also. It should be

able to withstand high hydrostatic pressure, stop moisture coming up through concrete to de-bond any

overlay system. It will eliminate the need for surface applied membranes etc.

It does not contain oils, stearates, sodium, any silicates or talc and should not be hydrophobic. It should be

able to grow crystals year after year to bridge micro cracks (not live/moving cracks) that may occur from

time to time. In order to produce crystals to fill up the pores the crystalline product will not be dependent on

the presence of free lime in hardened concrete. It will minimize shrinkage cracks and help in internal

It will be ne nontoxic and confirming to NSF (USA) certification for use of structure holding potable water,

based on testing in accordance with NSF 61 & US Environmental Protection Agency. warranty will be

provided by the authorized applicator of the Manufacturer.

Item No. Description of Item Qty. Unit In Figure In Word Amount

38 Providing and placing in position suitable Synthetic Rubber Waterstop specially designed for Construction 629.00 RMT 552.68 RS: Five Hundred Fifty Two and Paise

joints in concrete with The help of suitable adhesive. It should be capable to swell 1000% of its original Sixty Eight only

volume in fresh water and 800% in concrete water and 300% in saline water to seal the construction joint

and stop water. It should be trapezoid, flexible rubber strip of size 5x20mm having density of 1.2-

1.25gm/cm3 having tensile strength more than 3 mpa .It should be capable to withstand water pressure

resistance more than 0.8mpa(8bar )

39 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 44.00 CMT 10566.60 RS: Ten Thousand Five Hundred Sixty Six

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so and Paise Sixty only

as to give a fair finish. but excluding the cost of reinforcement in COLUMN for GROUND FLOOR.Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

40 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 42.00 CMT 10606.45 RS: Ten Thousand Six Hundred Six and

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Paise Forty Five only

as to give a fair finish. but excluding the cost of reinforcement in COLUMN for FIRST FLOOR.Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

41 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 42.00 CMT 10646.30 RS: Ten Thousand Six Hundred Forty Six

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so and Paise Thirty only

as to give a fair finish. but excluding the cost of reinforcement in COLUMN for SECOND FLOOR.Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

42 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 42.00 CMT 10686.15 RS: Ten Thousand Six Hundred Eighty Six

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so and Paise Fifteen only

as to give a fair finish. but excluding the cost of reinforcement in COLUMN for THIRD FLOOR.Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

43 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 42.00 CMT 10726.00 RS: Ten Thousand Seven Hundred Twenty

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Six only

as to give a fair finish. but excluding the cost of reinforcement in COLUMN for FOURTH FLOOR.Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design

44 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 9.00 CMT 10765.85 RS: Ten Thousand Seven Hundred Sixty

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Five and Paise Eighty Five only

as to give a fair finish. but excluding the cost of reinforcement in COLUMN for FIFTH FLOOR.Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design

Item No. Description of Item Qty. Unit In Figure In Word Amount

45 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 9.00 CMT 10805.70 RS: Ten Thousand Eight Hundred Five

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so and Paise Seventy only

as to give a fair finish. but excluding the cost of reinforcement in COLUMN for SIXTH FLOOR.Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design

46 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 20.00 CMT 8194.90 RS: Eight Thousand One Hundred Ninty

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Four and Paise Ninty only

as to give a fair finish. but excluding the cost of reinforcement in SHEAR WALL for GROUND

FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

47 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 20.00 CMT 8234.75 RS: Eight Thousand Two Hundred Thirty

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Four and Paise Seventy Five only

as to give a fair finish. but excluding the cost of reinforcement in SHEAR WALL for FIRST FLOOR.Rates

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

48 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 20.00 CMT 8274.60 RS: Eight Thousand Two Hundred Seventy

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Four and Paise Sixty only

as to give a fair finish. but excluding the cost of reinforcement in SHEAR WALL for SECOND

FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

49 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 20.00 CMT 8314.45 RS: Eight Thousand Three Hundred

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Fourteen and Paise Forty Five only

as to give a fair finish. but excluding the cost of reinforcement in SHEAR WALL for THIRD FLOOR.Rates

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

50 Providing & laying controlled cement concrete M -300 including finishing smooth with curing 20.00 CMT 8354.30 RS: Eight Thousand Three Hundred Fifty

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Four and Paise Thirty only

as to give a fair finish. but excluding the cost of reinforcement in SHEAR WALL for .FOURTH

FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

51 Providing and laying controlled cement concrete M-300 including finishing smooth with curing complete 26.00 CMT 14731.42 RS: Fourteen Thousand Seven Hundred

Including the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give Thirty One and Paise Forty Two only

a fair finish.but excluding cost of reinforcement Rate also inclusive of providing & mixing of plasticiser as

per manufactured recommanded propotion concrete work in VERTICAL AND HORIZONTAL FINS FOR

terrace FLOORS.

Item No. Description of Item Qty. Unit In Figure In Word Amount

52 Providing and laying Controlled Cement Concrete M-300 for R.C.C. BEAMS having any cross sectional 45.00 CMT 8921.69 RS: Eight Thousand Nine Hundred Twenty

area .complete Including the cost of form work of Plywood only with fair finish & Proping must be of steel One and Paise Sixty Nine only

only so as to give a fair finish but excluding the cost of reinforcement for Ground Floor. rates are inclusive

of providing and mixing plasticizer of approved make in proportion as per mix design.

53 Providing and laying Controlled cement concrete M-300 and finishing smooth with curing etc.. 41.00 CMT 8961.54 RS: Eight Thousand Nine Hundred Sixty

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so One and Paise Fifty Four only

as to give a fair finish. but exculding the cost of reinforcement for BEAMS having any cross sectional

area for FIRST FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

54 Providing and laying Controlled cement concrete M-300 and finishing smooth with curing etc.. 41.00 CMT 9001.39 RS: Nine Thousand One and Paise

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Thirty Nine only

as to give a fair finish. but exculding the cost of reinforcement for BEAMS having any cross sectional

area for SECOND FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

55 Providing and laying Controlled cement concrete M-300 and finishing smooth with curing etc.. 41.00 CMT 9041.24 RS: Nine Thousand Forty One and Paise

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Twenty Four only

as to give a fair finish. but exculding the cost of reinforcement for BEAMS having any cross sectional

area for THIRD FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

56 Providing and laying Controlled cement concrete M-300 and finishing smooth with curing etc.. 41.00 CMT 9081.09 RS: Nine Thousand Eighty One and Paise

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so Nine only

as to give a fair finish. but exculding the cost of reinforcement for BEAMS having any cross sectional

area for FOURTH FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

57 Providing and laying Controlled cement concrete M-300 and finishing smooth with curing etc.. 6.00 CMT 9120.94 RS: Nine Thousand One Hundred Twenty

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so and Paise Ninty Four only

as to give a fair finish. but exculding the cost of reinforcement for BEAMS having any cross sectional

area for FIFTH FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

58 Providing and laying Controlled cement concrete M-300 and finishing smooth with curing etc.. 5.00 CMT 9160.79 RS: Nine Thousand One Hundred Sixty

completeIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so and Paise Seventy Nine only

as to give a fair finish. but exculding the cost of reinforcement for BEAMS having any cross sectional

area for SIXTH FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

Item No. Description of Item Qty. Unit In Figure In Word Amount

59 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 80.00 CMT 7864.99 RS: Seven Thousand Eight Hundred Sixty

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Four and Paise Ninty Nine only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 13cm and upto

15cm for GROUND FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

60 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 75.00 CMT 7904.84 RS: Seven Thousand Nine Hundred Four

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair and Paise Eighty Four only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 13cm and upto

15cm for FIRST FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

61 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 75.00 CMT 7944.69 RS: Seven Thousand Nine Hundred Forty

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Four and Paise Sixty Nine only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 13cm and upto

15cm for SECOND FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

62 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 75.00 CMT 7984.54 RS: Seven Thousand Nine Hundred Eighty

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Four and Paise Fifty Four only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 13cm and upto

15cm for THIRD FLOOR.. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

63 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 75.00 CMT 8024.39 RS: Eight Thousand Twenty Four and

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Paise Thirty Nine only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 13cm and upto

15cm for FOURTH FLOOR.. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

64 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 8.00 CMT 8064.24 RS: Eight Thousand Sixty Four and Paise

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Twenty Four only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 13cm and upto

15cm for FIFTH FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

65 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 8.00 CMT 8104.09 RS: Eight Thousand One Hundred Four

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair and Paise Nine only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 13cm and upto

15cm for SIXTH FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

Item No. Description of Item Qty. Unit In Figure In Word Amount

66 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 29.00 CMT 7584.99 RS: Seven Thousand Five Hundred Eighty

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Four and Paise Ninty Nine only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 16cm and upto

18cm for GROUND FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

67 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 11.00 CMT 7658.34 RS: Seven Thousand Six Hundred Fifty

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Eight and Paise Thirty Four only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 16cm and upto

18cm for FIRST FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

68 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 11.00 CMT 7731.69 RS: Seven Thousand Seven Hundred

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Thirty One and Paise Sixty Nine only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 16cm and upto

18cm for SECOND FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

69 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 11.00 CMT 7805.04 RS: Seven Thousand Eight Hundred Five

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair and Paise Four only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 16cm and upto

18cm for THIRD FLOOR.. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

70 Providing and laying Controlled cement concrete M-300 finishing smooth with curing etc.complete Including 11.00 CMT 7878.39 RS: Seven Thousand Eight Hundred

the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give a fair Seventy Eight and Paise Thirty Nine only

finish. but excluding the cost of reinforcement for R.C.C. work in SLAB having thickness of 16cm and upto

18cm for FOURTH FLOOR.. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

71 Provinding and Laying controlled cement concrete M-300 for reinforced conerete CHHAJJAS not 59.00 CMT 9678.18 RS: Nine Thousand Six Hundred Seventy

exceeding 10cm thickness up to floor two level .Including the cost of form work of Plywood only with fair Eight and Paise Eighteen only

finish & Proping must be of steel only so as to give a fair finish the exposed surface with cement mortar 1:3

( 1 cement : 3 fine sand) to give a smooth surface ,centering and formwork and curing complete. excluding

cost of reinforcement for ALL FLOOR LEVEL. Rates are Inclusive of Providing and Mixing Plasticiser of

Approved Make & In Proportion As Per Mix DesignN

Item No. Description of Item Qty. Unit In Figure In Word Amount

72 Providing and laying Controlled cement concrete M-300 including finishing smooth for R.C.C. STAIR CASE 36.00 CMT 8365.11 RS: Eight Thousand Three Hundred Sixty

iIncluding the cost of form work of Plywood only with fair finish & Proping must be of steel only so as to give Five and Paise Eleven only

a fair finish.and curing etc. Complete excluding cost of reinforcement for ALL FLOORS. Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

73 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTEL including finishing smooth with 6.00 CMT 8611.26 RS: Eight Thousand Six Hundred Eleven

curing etc. Including the cost of form work of Plywood only with fair finish & Proping must be of steel only so and Paise Twenty Six only

as to give a fair finish. but excluding the cost of reinforcement for GROUND FLOOR. Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

74 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTEL including finishing smooth with 9.00 CMT 8651.11 RS: Eight Thousand Six Hundred Fifty One

curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping must be of and Paise Eleven only

steel only so as to give a fair finish. but excluding the cost of reinforcement for FIRST FLOOR. Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

75 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTEL including finishing smooth with 10.00 CMT 8690.96 RS: Eight Thousand Six Hundred Ninty

curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping must be of and Paise Ninty Six only

steel only so as to give a fair finish. but excluding the cost of reinforcement for SECOND FLOOR. Rates

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

76 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTEL including finishing smooth with 10.00 CMT 8730.81 RS: Eight Thousand Seven Hundred Thirty

curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping must be of and Paise Eighty One only

steel only so as to give a fair finish. but excluding the cost of reinforcement for THIRD FLOOR. Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

77 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTEL including finishing smooth with 10.00 CMT 8770.66 RS: Eight Thousand Seven Hundred

curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping must be of Seventy and Paise Sixty Six only

steel only so as to give a fair finish. but excluding the cost of reinforcement for FOURTH FLOOR. Rates

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

Item No. Description of Item Qty. Unit In Figure In Word Amount

78 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTEL including finishing smooth with 1.00 CMT 8810.51 RS: Eight Thousand Eight Hundred Ten

curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping must be of and Paise Fifty One only

steel only so as to give a fair finish. but excluding the cost of reinforcement for FIFTH FLOOR. Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

79 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTEL including finishing smooth with 1.00 CMT 8850.36 RS: Eight Thousand Eight Hundred Fifty

curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping must be of and Paise Thirty Six only

steel only so as to give a fair finish. but excluding the cost of reinforcement for SIXTH FLOOR. Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

80 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTELBEND including finishing 7.00 CMT 6112.87 RS: Six Thousand One Hundred Twelve

smooth with curing etc. Including the cost of form work of Plywood only with fair finish & Proping must be of and Paise Eighty Seven only

steel only so as to give a fair finish. but excluding the cost of reinforcement for GROUND FLOOR. Rates

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

81 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTELBEND including finishing 11.00 CMT 6152.72 RS: Six Thousand One Hundred Fifty Two

smooth with curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping and Paise Seventy Two only

must be of steel only so as to give a fair finish. but excluding the cost of reinforcement for FIRST FLOOR.

Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix

82 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTELBEND including finishing 11.00 CMT 6192.57 RS: Six Thousand One Hundred Ninty Two

smooth with curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping and Paise Fifty Seven only

must be of steel only so as to give a fair finish. but excluding the cost of reinforcement for SECOND

FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

83 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTELBEND including finishing 11.00 CMT 6232.42 RS: Six Thousand Two Hundred Thirty

smooth with curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping Two and Paise Forty Two only

must be of steel only so as to give a fair finish. but excluding the cost of reinforcement for THIRD FLOOR.

Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix

84 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTELBEND including finishing 10.00 CMT 6272.27 RS: Six Thousand Two Hundred Seventy

smooth with curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping Two and Paise Twenty Seven only

must be of steel only so as to give a fair finish. but excluding the cost of reinforcement for FOURTH

FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

Item No. Description of Item Qty. Unit In Figure In Word Amount

85 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTELBEND including finishing 1.00 CMT 6312.12 RS: Six Thousand Three Hundred Twelve

smooth with curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping and Paise Twelve only

must be of steel only so as to give a fair finish. but excluding the cost of reinforcement for FIFTH FLOOR.

Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix

86 Providing and laying Controlled cement concrete M-300 for R.C.C. LINTELBEND including finishing 1.00 CMT 6351.97 RS: Six Thousand Three Hundred Fifty

smooth with curing etc. Complete Including the cost of form work of Plywood only with fair finish & Proping One and Paise Ninty Seven only

must be of steel only so as to give a fair finish. but excluding the cost of reinforcement for SIXTH FLOOR.

Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix

87 Providing T.M.T, FE - 500D Bar Reinfor Cement for R.C.C.work including cutting, bending, binding and 298303.43 KG. 76.48 RS: Seventy Six and Paise Forty Eight

placing in position etc.complete for All Floors. (Brand as approved by GSPHC) only

88 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.cm.in 218.00 CMT 4253.46 RS: Four Thousand Two Hundred Fifty

superstructure above plinth up to floor two level in conventional bricks in cement mortar 1:6(1-cement;6- Three and Paise Forty Six only

fine sand) for Ground Floor.

89 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.cm.in 234.00 CMT 4293.25 RS: Four Thousand Two Hundred Ninty

superstructure above plinth up to floor two level in conventional bricks in cement mortar 1:6(1-cement;6- Three and Paise Twenty Five only

fine sand) for First Floor.

90 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.cm.in 232.00 CMT 4333.04 RS: Four Thousand Three Hundred Thirty

superstructure above plinth up to floor two level in conventional bricks in cement mortar 1:6(1-cement;6- Three and Paise Four only

fine sand) for. FOR SECOND FLOOR

91 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.cm.in 217.00 CMT 4372.83 RS: Four Thousand Three Hundred

superstructure above plinth up to floor two level in conventional bricks in cement mortar 1:6(1-cement;6- Seventy Two and Paise Eighty Three only

fine sand) for. FOR THIRD FLOOR

92 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.cm.in 193.00 CMT 4412.62 RS: Four Thousand Four Hundred Twelve

superstructure above plinth up to floor two level in conventional bricks in cement mortar 1:6(1-cement;6- and Paise Sixty Two only

fine sand) for.. FOR FOURTH FLOOR

93 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.cm.in 19.00 CMT 4452.41 RS: Four Thousand Four Hundred Fifty

superstructure above plinth up to floor two level in conventional bricks in cement mortar 1:6(1-cement;6- Two and Paise Forty One only

fine sand) for.FOR FIFTH FLOOR

94 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.cm.in 19.00 CMT 4492.20 RS: Four Thousand Four Hundred Ninty

superstructure above plinth up to floor two level in conventional bricks in cement mortar 1:6(1-cement;6- Two and Paise Twenty only

fine sand) for. FOR SIXTH FLOOR

Item No. Description of Item Qty. Unit In Figure In Word Amount

95 Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 9.00 SMT 646.70 RS: Six Hundred Forty Six and Paise

Kg/Sq.cm.in cement mortar 1:4(1-cement;4- coarse sand) for Ground Floor. Seventy only

96 Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 59.00 SMT 652.64 RS: Six Hundred Fifty Two and Paise

Kg/Sq.cm.in cement mortar 1:4(1-cement;4- coarse sand) for FIRST Floor. Sixty Four only

97 Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 53.00 SMT 658.58 RS: Six Hundred Fifty Eight and Paise

Kg/Sq.cm.in cement mortar 1:4(1-cement;4- coarse sand) for SECOND Floor. Fifty Eight only

98 Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 42.00 SMT 664.52 RS: Six Hundred Sixty Four and Paise

Kg/Sq.cm.in cement mortar 1:4(1-cement;4- coarse sand) for THIRD Floor. Fifty Two only

99 Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 122.00 SMT 670.46 RS: Six Hundred Seventy and Paise

Kg/Sq.cm.in cement mortar 1:4(1-cement;4- coarse sand) for FOURTH Floor. Forty Six only

100 Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and finished 555.00 SMT 199.88 RS: One Hundred Ninty Nine and Paise

even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat cement at Eighty Eight only

101 Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and finished 507.00 SMT 225.69 RS: Two Hundred Twenty Five and Paise

even and smooth in C.M. 1:3 ( 1 cement :3 sand ) including finishing with floating coat of neat cement at Sixty Nine only

102 Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and finished 500.00 SMT 251.50 RS: Two Hundred Fifty One and Paise

even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat cement at Fifty only

103 Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and finished 494.00 SMT 277.31 RS: Two Hundred Seventy Seven and

even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat cement at Paise Thirty One only

104 Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and finished 500.00 SMT 303.12 RS: Three Hundred Three and Paise

even and smooth in C.M. 1:3 ( 1 cement 3 sand ) including finishing with floating coat of neat cement at Twelve only

105 Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and finished 43.00 SMT 328.93 RS: Three Hundred Twenty Eight and

even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat cement at Paise Ninty Three only

Item No. Description of Item Qty. Unit In Figure In Word Amount

106 Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and finished 43.00 SMT 354.74 RS: Three Hundred Fifty Four and Paise

even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat cement at Seventy Four only

107 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior 1152.00 SMT 203.34 RS: Two Hundred Three and Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating Thirty Four only

coat of neat cement slurry at GROUND FLOOR.

108 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior 1532.00 SMT 231.20 RS: Two Hundred Thirty One and Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating Twenty only

coat of neat cement slurry at FIRST FLOOR.

109 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior 1584.00 SMT 259.06 RS: Two Hundred Fifty Nine and Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing with Six only

floating coat of neat cement slurry at SECOND FLOOR.

110 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior 1436.00 SMT 286.92 RS: Two Hundred Eighty Six and Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing with Ninty Two only

floating coat of neat cement slurry at THIRD FLOOR .

111 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior 1187.00 SMT 314.78 RS: Three Hundred Fourteen and Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating Seventy Eight only

coat of neat cement slurry at FOURTH FLOOR.

112 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior 89.00 SMT 342.64 RS: Three Hundred Forty Two and Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating Sixty Four only

coat of neat cement slurry at FIFTH FLOOR.

113 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior 89.00 SMT 370.50 RS: Three Hundred Seventy and Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing with Fifty only

floating coat of neat cement slurry at SIXTH FLOOR.

114 Synthetic Texture Plaster with Double Coat Smooth plaster : Providing 20mm thick cement plaster in single 4380.00 SMT 509.58 RS: Five Hundred Nine and Paise Fifty

coat plastering upto floor two level Outside and finished even and smooth in (i) Cement mortar 1:3 (1- Eight only

cement : 3-sand) as Base Coat and providing 2-3 mm thick synthetic texture plaster of approved texture

(Material Shall be Used as Approved By GSPHCL Only ) including cost of all materials, labour,

conveyance, loading and unloading, taxes, royalties, scaffolding, watering etc.complete for any Height as

per Drawing and instructions of Engineer -in -Charge.

115 Provinding 10 mm thick cement PLASTER in single coat of interior plastering and finished even and 727.00 SMT 238.85 RS: Two Hundred Thirty Eight and Paise

smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating coat of neat cement slurry Eighty Five only

including providing and mixing WATER PROFFING material in C.M in proportion recomended by the

manufacturer including finishing with a flaoting coat of neat cement slurry. FOR ALL FLOOR

Item No. Description of Item Qty. Unit In Figure In Word Amount

116 Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing paint treatment treatment in two 727.00 SMT 110.70 RS: One Hundred Ten and Paise

coats of vertical and horizontal surface of depressed portion of Bath/W.C. as directed by engineer in Seventy only

charge.This treatment shall be carried out over & above water proofing plaster

117 Providing and filling light weight filling material (CINDER) an approved in sunk slabs or as may be directed 66.00 CMT 791.68 RS: Seven Hundred Ninty One and Paise

at all floors including watering, consolidation etc.. Complete. Sixty Eight only

118 Providing CEMENT VATA ( 10cm x 10cm )size quarter round in cement mortar 1 : 1 including neat cement 1032.00 RMT 23.45 RS: Twenty Three and Paise Forty Five

finishing, watering etc. Complete. only

119 Providing & laying Cement Concrete flooring 1:2:4 (1- cement 2; sand 4- M/c graded stone aggregate of 341.00 SMT 348.08 RS: Three Hundred Forty Eight and Paise

20 mm nominal size) laid in one layer finished with a floating coat of neat cement (B) 50mm thick. Eight only

120 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 1mm Thick 164.00 SMT 8976.41 RS: Eight Thousand Nine Hundred

Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine or southern Yellow Seventy Six and Paise Forty One only

Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with Lock rail on

Center. Flush Door Provide with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door

with Door Frame of Non Teak Solid Wood of size 120mm x 65mm with Chemically Treated and Seasoned

Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year warranty against attack

of biological agent like termite, borers, decay, fungi and harmful insects also warranty against seasoning

related issues like crack, bending, twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is free from nail mark & any damages etc.

Rates are also Inclusive of all Labors & Proviging 15cm. Long 6 No of Hold Fast (25mm X 5mm) & 3 No of

6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing

following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg

Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick. Door are Fixing as per

Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per approved Material

Make List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

Item No. Description of Item Qty. Unit In Figure In Word Amount

121 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door Shutter with 1mm Thick 69.00 SMT 12870.01 RS: Twelve Thousand Eight Hundred

Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine or southern Yellow Seventy and Paise One only

Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with Lock rail on

Center. Flush Door Provide with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door

with Door Frame of Non Teak Solid Wood of size 150mm x 70mm with Chemically Treated and Seasoned

Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year warranty against attack

of biological agent like termite, borers, decay, fungi and harmful insects also warranty against seasoning

related issues like crack, bending, twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is free from nail mark & any damages etc

Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 8 No of

6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing 6mm

thick Glass on Top of Door Frame with Battens Patti, following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double Leg Heavy Push Door

Stopper 2 No & (4) Handle 4 No, 150mm Long X 10mm thick. Door with Glass are Fixing as per Details

Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per approved Material Make

List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

122 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 1mm Thick 59.00 SMT 8399.74 RS: Eight Thousand Three Hundred Ninty

Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine or southern Yellow Nine and Paise Seventy Four only

Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with Lock rail on

Center. Flush Door Provide with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door

with Door Frame of Non Teak Solid Wood of size 100mm x 60mm with Chemically Treated and Seasoned

Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year warranty against attack

of biological agent like termite, borers, decay, fungi and harmful insects also warranty against seasoning

related issues like crack, bending, twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is free from nail mark & any damages etc.

Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 4 No of

6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing

following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg

Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick. Door are Fixing as per

Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per approved Material

Make List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

Item No. Description of Item Qty. Unit In Figure In Word Amount

123 Providing and fixing solid PVC Flush Door shutter 24mm thick,made from Co-extruded three layer rigid 76.00 SMT 4513.00 RS: Four Thousand Five Hundred Thirteen

PVC foam sheet(single Extruded) with density not less than 600kg/cbm outer layer (0.8-1mm)thick should only

be rigid PVC with density of not less than 1400kg/cbm. Door should be water proof,Termite proof ,fire

retardant&having good screw holding capacity.proviidng and fixing 100% Solid Wood Plastic

composite(WPC) Door Frame 90mmx45mm made from wood plastic composite(single Extruded

Process)material with density 780kg/cbm .all as per specifications drawing as directed by the engineer in

124 Providing and fixing Alluminium section window having extruded Aluminum Colour anodized section frame, 452.00 SMT 1902.50 RS: One Thousand Nine Hundred Two

main outer size 95mm x 24mmx1.17mm @ wt. of 0.738 kg/rmt , horizontal Three track member size 92mm and Paise Fifty only

x 31.75mm x 1.30mm,@ Wt. 1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt.

1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm ,@ wtof 0.456 Kg/mt),

vertical member of size 40mm x 18mm x 1.29 mm ,@ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details including One mosquito jali with shutter With Both Side Locking

125 Providing and fixing Alluminium section window having extruded Aluminum Colour anodized section frame 2.00 SMT 1568.27 RS: One Thousand Five Hundred Sixty

main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Eight and Paise Twenty Seven only

Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt),

vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8947@ wt.of

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per details including With Both

Side Locking Arrangment for ALL FLOORS.

126 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 246.00 SMT 1696.73 RS: One Thousand Six Hundred Ninty Six

63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /Rmt, horizontal two track member size 61.85 mm x 31.75 mm x and Paise Seventy Three only

1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt.0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete for window.

127 Providing and fixing standard extruded of alluminium section of size 63 * 38.10 * 1.2 mm,@ Wt 0.643 10.00 SMT 1163.92 RS: One Thousand One Hundred Sixty

Kg/RMT )with colour aNOdized alluminium frame for ventilation with 5 mm thick frosted glass as details Three and Paise Ninty Two only

etc complete FOR VENTILATION

Item No. Description of Item Qty. Unit In Figure In Word Amount

128 Providing & Laying integrated cement based proprietary water proofing treatment of required thickness 586.00 SMT 855.11 RS: Eight Hundred Fifty Five and Paise

over the roof including 10mm thick cement mortar 1:3 and CHINA MOSAIC fitting and finally finishing the Eleven only

surface with white cement slurry and sloping out terrace slabs withFollowing specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near rainwater outlet or the lowest

point of the finished slope shell not to be less than 45 mm. Including treating the vertical surface of the

parapet wall up to 20 cm. height above finished level of terracing including finishing top with joint less water

proofing plaster curing testing etc, completed. Rate is Including 10 years performance of guarantee bond

to be given on stamp paper ( no extra shall be paid for increase in thickness for proper slope ). (A) Applying

& grounting a slurry coat of neat cement using 2.75 kg/smt. of cement admixed with proprietary water

proofing compound confirming to IS 2645 and 10mm. Thick water proofing cement plaster in cement

mortar in 1:3.over the RCC slab including cleaning the surface before treatments.

(B) Laying cement concrete using broken brick bat using 25 mm to 40 mm size with 50% of cement mortar

1:4 ( 1 cement : 4 corse sand )over 10mm. thick water proofing cement plaster in cement mortar in 1:3

admixed with proprietary water proofing compound conforming to IS 2645 required slope and treating

similarly the adjoining walls up to 200 mm height including rounding of junction of walls.

(C) After two days of proper curing applying a second coat of cement slurry .

(D) Finishing the surface with china mosaic peices laid on 10 mm thick joint less cement mortar of mix 1:3 (

1 cement : 3 sand) admixed with proprietary water proofing compound confirming to IS 2645 and finally

finishing the surface with trowel with neat cement slurry .

(E) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing

for final test. All above operation to be done in order and as directed and specified by the engineer in

129 Providing and laying 24" x 24" Double Charge Vitrified Tiles 8 to 10 mm thick in Flooring over 20 mm 1825.00 SMT 1440.20 RS: One Thousand Four Hundred Forty

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface orfixing on existing and Paise Twenty only

flooring by adhesive including dismentaling of existing flooring and material jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc. complete for Light shade for all

floors.Material shall be used as approved by GSPHCL

130 Providing and laying 24" x 24" Double Charge Vitrified Tiles 8 to 10 mm thick in Skirting over 10 mm 117.00 SMT 1392.20 RS: One Thousand Three Hundred Ninty

(average) base of cement mortar 1:3 ( 1 cement: 3 coarse sand) on new surface orfixing on existing Two and Paise Twenty only

flooring by adhesive including dismentaling of existing flooring and material jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc. complete for Light Shade for all

floors.Material shall be used as approved by GSPHCL

131 Providing and laying 25mm thick Machine cut Rough KOTA STONE SLAB FLOORING over 20mm 417.00 SMT 705.39 RS: Seven Hundred Five and Paise

average thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) laid over & jointed with grey cement Thirty Nine only

slurry including rubbing & polishing etc. Complete. as Directed By Engineer In Charge for all Floors.

Item No. Description of Item Qty. Unit In Figure In Word Amount

132 Providing and Laying 25mm thick Mirror Polished (Dimond Cut) Kota Stone Flooring over 20mm thick base 556.00 SMT 1081.90 RS: One Thousand Eighty One and Paise

of cement mortar 1 : 6 (1-Cement : 6-Coarse Sand) laid over and jointed with grey cement slurry including Ninty only

Rubbing and Polishing etc. Complete as Directed By Engineer In Charge for all Floors.

133 Providing and Laying 25mm thick Mirror Polished (Dimond Cut) Kota Stone in risers of steps,skirting Dedo 37.00 SMT 1275.10 RS: One Thousand Two Hundred Seventy

and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement Five and Paise Ten only

slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete as

Directed By Engineer In Charge for all Floors.

134 Provinding and Laying 18 mm thick Granite Stone Slab Flooring over 20mm thick average base of C.M. 364.00 SMT 2131.98 RS: Two Thousand One Hundred Thirty

1:6 (1cement : 6 coarse sand) laid and jointed with grey cement slury including Rubbing and Polishing etc. One and Paise Ninty Eight only

Complete for All Floors.

135 Provinding and Laying 18 mm thick Granite stone slab in Skirting / Dado over 10mm thick average base of 70.00 SMT 2325.18 RS: Two Thousand Three Hundred Twenty

C.M. 1:3 (1:cement :3 coarse sand) laid and jointed with grey cement slury including Rubbing and Polishing Five and Paise Eighteen only

etc. Complete for All Floors.

136 MOULDING OF KOTA STONE/GRANITE STAIR TRADE COMPLETE AS PER DIRECTION OF 430.00 RMT 129.95 RS: One Hundred Twenty Nine and Paise

ENGINEER IN CHARGE Ninty Five only

137 PRO. 3 NOS GROOVE IN TOTAL LENGTH OF STAIRCASE TREAD OF SIZE 3 mm*3mm FINISHED 430.00 RMT 82.80 RS: Eighty Two and Paise Eighty only

SMOOTH IN PARALLEL LINE , EQUALLY SPACED AS PER DIRECTION OF ENGINEER -IN CHARGE.

138 Providing and laying Anti skid Ceramic tiles (Non Skiding) 8 mm to 10mm thick in Floorings, treads of steps 227.00 SMT 960.47 RS: Nine Hundred Sixty and Paise Forty

and landing laid on a bed of 20 mm thick cement mortar 1:3 (1 - cement: 3- coarse sand) finished with flush Seven only

pointing in the colour as specified etc. complete in white cement for All Floors. Size and shade shall be as

per the instruction of Engineer - In - Charge.

139 Providing and laying Ceramic tiles 8 mm to 10mm thick in skirting, risers of steps and DADO on 10mm 738.00 SMT 1028.11 RS: One Thousand Twenty Eight and

thick cement mortar 1:3 (1-cement: 3 coarse sand) finished with flush pointing in the colour as specified Paise Eleven only

etc. complete in white cement for All Floors. Size and shade shall be as per the instruction of Engineer - In -

140 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface (two coats) to give an 3242.00 SMT 186.73 RS: One Hundred Eighty Six and Paise

required shap even shade after throughly brushing the surface to remove all dirt and remains of loose Seventy Three only

poweder material etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and one coat of

primer on new Ceilling/Slop Surface to give and even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand papered smooth.putty,primer & paint shall be as

per approved list of GSPHCL

Item No. Description of Item Qty. Unit In Figure In Word Amount

141 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required shap even 8033.00 SMT 176.33 RS: One Hundred Seventy Six and Paise

shade after throughly brushing the surface to remove all dirt and remains of loose poweder material etc. Thirty Three only

complete. Rate are inclusive of applying two coat of lapy (Putty) and one coat of primer on new wall surface

to give and even shade including thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. putty,primer & paint shall be as per approved list of GSPHCL

142 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) over and above 5149.00 SMT 147.68 RS: One Hundred Forty Seven and Paise

applying One Coat Of Primer to give an required shape even shade after thoroughly brushing the surface Sixty Eight only

to remove all dirt, and remains of loose powdered materials.etc complete. primer and paint make as per

the approved list of GSPHCL

143 Providing & Fixing 15mm Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour & 17.00 NO 990.61 RS: Nine Hundred Ninty and Paise Sixty

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of One only

Engineer In charge. The Model & Make of Bib Tap Shall be as per the Approved Make List of GSPHCL.

144 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour & 41.00 NO 1309.39 RS: One Thousand Three Hundred Nine

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of and Paise Thirty Nine only

Engineer In charge. The Model & Make of Two way Bib Tap Shall be as per the Approved Make List of

145 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour & Necessary 41.00 NO 565.51 RS: Five Hundred Sixty Five and Paise

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In Fifty One only

charge. The Model & Make of Health Faucets Shall be as per the Approved Make List of GSPHCL.

146 Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling with Connection 17.00 NO 2098.98 RS: Two Thousand Ninty Eight and Paise

32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Ninty Eight only

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The

Model & Make of Urinal Shall be as per the Approved Make List of GSPHCL.

147 Providing and laying G.I.RAIN WATER SPOUT of 50 mm dia and 0.30 m length. 10.00 NO. 100.90 RS: One Hundred and Paise Ninty

148 Providing and fixing Wash Basin single hole for piller tap with C.I or M.S. bracket painted white including 34.00 NO 2853.60 RS: Two Thousand Eight Hundred Fifty

cutting holes and making good the same but including fitting (A) Vitreous chaina :(II ) Below counter wash Three and Paise Sixty only

basin 480mm dia size in white colour of Parryware with model no.: FLAIR co 465 (ii) piller tap of benelave

of cat no.: BLHCP07001 make, including provinding and fixing C.P. brassa waste coupling 32mm dia (iii)

32mm cp brass european type bottle trap of benelave of cat no.: BLHCP70102 make, P.V.C water pipe M. I

. fisher union 32mm dia Com[plete including PVC connection pipe from stop cock to pillar tap and 32mm

dia waste pipe up to N.T etc. Complete.

Item No. Description of Item Qty. Unit In Figure In Word Amount

149 Constructing of COUNTER BASIN PLATE FORM (SAND WITCH TYPE) 60cm width and 80cm high 29.00 RMT 4546.90 RS: Four Thousand Five Hundred Forty

resting on thick sandwiched polish kota stone in C.M 1:3 with providing and fixing 25 mm thick rough kota Six and Paise Ninty only

stone at bottom and 18mm thick GRANITE stone/ granite stone (single piece) 18mm thick on top with

15mm high machine cut granite round moulded facia patty including moulding & polishing etc. complete as

per drawing and specification without wash basin including necessary cutting for wash basin. If need the

vertical support/ partition either single or sandwich type of polished kota stone (Polished on exposed sides)

shall be provided as per detailed drawing.

150 Provinding and fixing 600mm x 450mm bevelled edge MIRROR or superior glass mounted on 6mm thick 34.00 NO. 825.48 RS: Eight Hundred Twenty Five and

A.C. sheet of plywood sheet fixed to wooden plugs with C.P. brass screws & washers. Paise Forty Eight only

151 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 34.00 NO. 909.08 RS: Nine Hundred Nine and Paise Eight

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The only

Model & Make of Towel Ring Shall be as per the Approved Make List of GSPHCL

152 Providing & Fixing Towel Rod. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 14.00 NO. 1078.70 RS: One Thousand Seventy Eight and

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Paise Seventy only

Model & Make of Towel Rod Shall be as per the Approved Make List of GSPHCL.

153 Providing & Fixing Towel Rack. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 12.00 NO 3343.63 RS: Three Thousand Three Hundred Forty

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Three and Paise Sixty Three only

Model & Make of Towel Rack Shall be as per the Approved Make List of GSPHCL.

154 providing and fixing SS cloth HANGER (5 hook ) as per detailed drawing and as directed by engineering 22.00 NO. 249.85 RS: Two Hundred Forty Nine and Paise

incharge. Rate are inclusive of all material,labour, taxes. As per approved list of GSHPHCL Eighty Five only

155 Painting Numbers or name on Acrylic plate as Directed by Engineer in Charge. 97.00 NO. 100.00 RS: One Hundred only

156 Providing a I.S.I. mark 7 lavers three keys brass pad lock of NAVTRAL (godrej) make 65mm dia on 97.00 NO. 211.86 RS: Two Hundred Eleven and Paise

completion of porject. Eighty Six only

157 Providing, Fabrication and fixing M.S. Grill / GATE of approved pattern fabricated from M.S. flat, Square 19937.25 KG. 74.92 RS: Seventy Four and Paise Ninty Two

Bars, round bars, C channel, square/round box pipe as per detail drawings. Rate is inclusive of welding only

with grinding and applying of mild steel putty with hardener into groove to have smooth surface, two coats

of oil paint and one coat of yellow zinc chromate primer coat as per the Approved Make List of GSPHCL

158 Providing and fixing chicken wire mesh jali of 20 guage with necessary screws and nails at joints or 1791.00 SMT 64.06 RS: Sixty Four and Paise Six only

crackes of brick work or RCC work, as per drawing, spicification and direction of Engineer in charge.wire-

mesh jali shall confirm to relevant IS specification

Item No. Description of Item Qty. Unit In Figure In Word Amount

159 Providing and Fixing Granite Telephonic Black Colour 15 to 18mm thick for jambs and sills of doors & 538.00 SMT 2428.00 RS: Two Thousand Four Hundred Twenty

windows using neat cement slurry laid over 20 mm average base of cement mortar 1:1(1 cement:1 Coarse Eight only

Sand) and jointed with grey cement slurry including racking(Tancha Work) rubbing and

polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with base of neat cement) as per direction

of Engineer in charge including rounding the exposed edges as directed.

160 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S" Trap including 37.00 No. 5470.90 RS: Five Thousand Four Hundred Seventy

Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S heavy duty rack bolt having 16mm and Paise Ninty only

dia, 165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. The Model & Make of Wall Hung & Flush Tank Shall be as per the

Approved Make List of GSPHCL.

161 Providing & Fixing Shower with Arm. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 25.00 No. 931.79 RS: Nine Hundred Thirty One and Paise

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Seventy Nine only

Model & Make of Shower with Arm Shall be as per the Approved Make List of GSPHCL.

162 Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with Exposed Part & Other Accessories 25.00 No. 942.54 RS: Nine Hundred Forty Two and Paise

(Sleeve, Lever, Wall Flange). Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete Fifty Four only

as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model &

Make of Concealed Heavy Stop Cock Shall be as per the Approved Make List of GSPHCL.

163 Providing and fixing both side polished machine cut Granite Shelves / Partitions 18mm thick embaded in to 31.00 SMT 2115.40 RS: Two Thousand One Hundred Fifteen

wall at support including racking and finishing smooth the surface including cutting the stone as and where and Paise Forty only

required etc. complete including rounding of exposed edges etc. complete.

164 Providing and fixing 927mm high S.S. railing for staircase made from S. S. pipe of 50mm dia & 1.5mm 15.00 RMT 10742.67 RS: Ten Thousand Seven Hundred Forty

thick, SS 316 grade horizontal at top for hand rail and with 50mm dia & 1.5mm thick, SS 316 grade SS top Two and Paise Sixty Seven only

mounted round baluster as a vertical member fixed in RCC slab with double glass holding accessories,

with 10mm thick toughened glass (upto 650mm height) fixed with 100mm dia x 8mm thick 316 grade base

plate with cover cap with 2no. Hilti frame Anchor HRD-C M10x100mm as per drawing using grouting

material as directed by engineer in Charge. Rate are inclusive of all material, labour, taxes, polishing etc.

and fixing complete. (Approved Make list As per GSPHCL only)

165 Providing and fixing 6 mm thick lexan polycarbonate multi wall roofing sheet fixed with hilti screw and 50.00 SMT 1427.62 RS: One Thousand Four Hundred Twenty

rubber silicon sealer and alluminium strip of 50x3 mm etc complete as directed by engineering in charge Seven and Paise Sixty Two only

166 Providing & Fixing 15 mm Heavy Duty STOP/ANGLE Cock with Exposed part and other accessories 47.00 NO 665.51 RS: Six Hundred Sixty Five and Paise

Rate are inclusive with all material, labour & neccery fittings. The Model & Make of STOP/ANGLE Cock Fifty One only

as per the Approved Make List of GSPHCL.

Item No. Description of Item Qty. Unit In Figure In Word Amount

167 Providing and laying exposed Cladding With Chemical approved by GSPHCL , using bricks having strenth 685.00 SMT 2875.00 RS: Two Thousand Eight Hundred Seventy

not less than 75 kg/m2 for above plinth & super structure for all level using bricks soaked in water 24 hrs. Five only

providing regular bond, breaking joints & layers, properly filling horizontal & vertical points, levelling at every

layer with cleaning.Including Fixing with necessary adhesive & Applying Silicone Paint SILIRS on Expose

brick Surface (Rate are including all material & labour)

168 Constructing of cooking platform ( sandwich type ) 68cm width and 80cm high resting on thick sandwiched 8.00 RMT 3757.57 RS: Three Thousand Seven Hundred Fifty

polish Granite Slab in C.M 1:3 with providing and fixing 25 mm thick rough kota stone at bottom and 20 to Seven and Paise Fifty Seven only

25 mm thick Polish Granite stone ( single piece/ telephonic Black ) top & Vertical and polished granite

stone (single piece/ telephonic Black ) 20 to 25mm thick on top & 18mm thick in Vertical with 15mm high

machine cut polished granite round moulded Top facia patty including polishing etc . complete as per

drawing and specification without stainless steel sink including necessary cutting for sink & making hole for

gas pipe and fixing P.V.C bend of 25mm dia

169 Providing and Fixing Stainless Steel ( 304 Grade ) 1mm thick Matt / Satin Finish Kitchen sink of over all 2.00 SMT 4274.00 RS: Four Thousand Two Hundred Seventy

Minimum size 533mmx 457mm X 203mm deep having bowl Minimum size 470mm x 395mm x 203mm Four only

with cement mortar 1:3 etc.complete.Rate including of 32mm dia.C.P.brass waste coupling and 32mm dia.

rigid PVC waste pipe upto N.T. (S.S. Kitchen As per approved list of G.S.P.H.C.L) for all floor.

170 Providing, supplying & fixing stainless steel letters 30cm height & 4.5cm wide etc. complete as directed. 20.00 NOS 885.50 RS: Eight Hundred Eighty Five and Paise

171 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 491.00 SMT 1632.63 RS: One Thousand Six Hundred Thirty

mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling Two and Paise Sixty Three only

tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance

and also having thermal conductivity 0.043° w/m KC.for the best thermal Insulation .The Light weight

calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of

& Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal

level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams

per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length

and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’

of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’

at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm

Item No. Description of Item Qty. Unit In Figure In Word Amount

172 Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of 182.00 SMT 600.94 RS: Six Hundred and Paise Ninty Four

size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with only

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size

40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x

mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining

compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as directed.

173 Supplying and installing of GRC jali thickness 25 mm,Grade M-40,Flexural M8, backside double coated 225.00 SMT 7379.10 RS: Seven Thousand Three Hundred

frame fabrication at site, including M.S frabrication at site trasnportation loading and unloading all, with Seventy Nine and Paise Ten only

both side weather proof emulsion paintetc complete as directed by EIC.

174 Providing and fixing in position PVC water tank of approved quality and size on terrace including making 20000.00 Ltr. 3.91 RS: Three and Paise Ninty One only

inlet and outlet, over flow and washout arrangement with G.I. Connection including using necessary

material and labour for connection etc. complete with closed cover as per drawing and specification. Rate

inclusive of Providing & applying two coats of oil paint on outside of water tank Joint shall be sealted by

175 Providing 20 mm thick SAND FACED cement plaster on walls above ground level consisting 12 mm thick 769.00 SMT 297.68 RS: Two Hundred Ninty Seven and Paise

backing coat of C.M. 1: 3 (1 cement : 3 sand ) and 8mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 sand Sixty Eight only

) etc. Complete for any height.

176 Box cutting the road surface to proper slope and camber for making a base for road work including 322.00 CMT 101.91 RS: One Hundred One and Paise Ninty

removing the excavated stuff and depositing on the road side slope as directed upto any lead & lift. One only

177 Construction of granular sub base by providing couarse graded spreading in uniform layer with motor 77.00 CMT 1441.28 RS: One Thousand Four Hundred Forty

grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with One and Paise Twenty Eight only

vibratory roller to achieve the desired density complete as per table 400-2

178 Supplying of graded stone aggregate of following sizes. (for W.B.M.) (3)Crushed stone aggregate for hard 58.00 CMT 997.21 RS: Nine Hundred Ninty Seven and Paise

quality up to 63mm size. Twenty One only

179 Spreading the stone aggregate for soling and W.B.M incl. filling the interstics forming the surface to 58.00 CMT 247.28 RS: Two Hundred Forty Seven and Paise

required camber and gradient (ii) 40mm to 63mm size. Twenty Eight only

180 Supplying of murrum on W.B.M surface etc comp 35.00 CMT 292.40 RS: Two Hundred Ninty Two and Paise

181 Spreading bindage or road crust filling the gaps in metal and leveling to cambert and gradient as directed 36.00 CMT 146.01 RS: One Hundred Forty Six and Paise

(i) murrum One only

182 Rolling and consolidation water bound macadam (except laterite and Kankar)including watering not 4290.00 SMT 20.79 RS: Twenty and Paise Seventy Nine

exceeding 15mm thickness (Main layer including binding materials) including filling in depression which only

occur during the process. (b) With power roller 8 tonne and not exceeding 12 tonne.

Item No. Description of Item Qty. Unit In Figure In Word Amount

183 Construction Of Concrete Road Using Trimix System Having of any Thickness M-300 Ready Mix Concrete 140.00 CMT 4526.64 RS: Four Thousand Five Hundred Twenty

With Providing And Fixing & Removing Of "C" Channel Having Size 75Mm. X75Mm As Per Required Level Six and Paise Sixty Four only

Slope And Thickness Of Concrete Road Floor Levelling Of Place Concrete With Adding Hardner & Surface

Vibrator Machine, Dewatering System Device Finishing With Power Floater Machine And Trowel Light

Brooming On The Surface As Directed With Providing Expansion Joint Size 20 X 190mm. (Including

Hardener)Using Of Concrete Cutter Machine Including Curing Etc. Complete.

184 Providing and Fixing pre- moulded compressible filler board in black colour confirming to MORTH 10.00 SMT 788.78 RS: Seven Hundred Eighty Eight and

Specifications (Clause 1015). having minimum density 95kg/cum.metre, non-staining with less than 1% Paise Seventy Eight only

water absorption & compression recovery of 93% minimum as per specification for 20 mm wide expansion

joint including cutting to required size and shape at all levels etc. complete as directed.

185 Providing Groove cutting in C.C. Road incluing cleaning etc.complete as per direction of Engineer incharge 275.00 SMT 36.80 RS: Thirty Six and Paise Eighty only

186 Providing & Laying pre-moulded ashphalt filler in joints as per drawing . (A) 12 mm 12.00 SMT 695.17 RS: Six Hundred Ninty Five and Paise

187 Providing and fixing 25 mm diameter backup rod having minimum density 22 kg per cum (ASTMD - 3575) 6.00 RMT 17.48 RS: Seventeen and Paise Forty Eight

& compression strength of 0.40 kg per sqm (ASTM 5249) and finishing with polysulphide sealant etc. only

complete. For 20 mm wide expansion joint

188 Providing & Laying lawn for Land Scaping including watering & all labours 105.00 SMT 150.00 RS: One Hundred Fifty only

189 Providing & Laying tree plantation rate are also inclusive of maintaing the tree plant in live condition at the 20.00 No 600.00 RS: Six Hundred only

time of completion of work at the time of Excavation of the building i.e. initial starting time (the tree shall be

minimum 1.50mt height).

190 Providing and fixing Precast Concrete Kerb Stone of Grey Cement Based Concrete Block size of 30 cm 38.00 RMT 358.06 RS: Three Hundred Fifty Eight and Paise

Length, 30 cm Height and 15 cm thick of M-250 Grade Concrete as per approved design in required colour Six only

(Red, White, and Yellow) and Including Excavation For Fixing In proper Line And Level, Filling The Joint

C:M 1:3 (1 Cement : 3 Fine Sand) etc. Complete.

191 Provding and fixing pre-cast Rubber Dye/ steel Dye inter locking concrete block 60 mm thick with grade of 175.00 SMT 680.10 RS: Six Hundred Eighty and Paise Ten

concrete M-300 pnumatic compressed / Vibrated mechanically pressed and as per approved design and IS only

15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level

as per guidlines of IRC : SP 63-2018 etc. complete.

192 Drilling of 250 mm dia pilot bore hole in all strata by using mud-flush direct rotary ring by using Bentonite 250.00 RMT 595.00 RS: Five Hundred Ninty Five only

Item No. Description of Item Qty. Unit In Figure In Word Amount

193 Reaming 250 mm dia pilot bore to 450 mm. dia hole including Assembling, Lowering Housing, Casing 250.00 RMT 275.00 RS: Two Hundred Seventy Five only

strainer pipe, gravel packing etc.completed. From 200 mm dia to 450 mm dia bore hole.

194 Conduction electrologing test of 300 mm dia. Bore hole incl. carting & idle-hour 1.00 JOB 18000.00 RS: Eighteen Thousand only

195 (A) Development of each water bearing zones comes/ across upto the full depth of tube well ( size 1.00 JOB 27446.00 RS: Twenty Seven Thousand Four Hundred

200/250/300 mm dia. depth more than 186 meter ) by lowuring 100 mm dia drop line & 32 mm dia G.I. Forty Six only

Ariline for each zone with suitable capacity air compressor upto the availability of sand free discharge (

Without air comp. charge)

196 (B) Development of above mentioned bore by air compressor 900 cfm./ 200 psi. capacity upto 6 hrs 6.00 Hrs. 8415.00 RS: Eight Thousand Four Hundred Fifteen

minimum until sand free discharge of the above which ever is latter. only

197 Providing and fixing M.S E.R.W plain end medium duty pipe confirming to I.s-4270/2001 with latest 180.00 RMT 2407.00 RS: Two Thousand Four Hundred Seven

amenments in random length of 4 to 7 mt.as per GWSSB R/C (A)200MM DIA(min 6mm thick)TATA OR only

198 Providing and fixing of Cage type trapezoidal shape ("V"') wire wound low carbon, galvanized screen pipe 72.00 RMT 1666.00 RS: One Thousand Six Hundred Sixty Six

and stainless steel screen pipes, confirming to IS: 8110. (B)200mm dia grade regular (1) 1.00 mm slot size only

199 Supply and laying of Gravel having size 4 mm to 6 mm size. 13.00 CMT 2029.00 RS: Two Thousand Twenty Nine only

200 Supply of clay ball made from sticky clay of size 15 mm to 25 mm & quality certified by Hydrologist. 19.00 CMT 751.00 RS: Seven Hundred Fifty One only

201 Fixing of Bore plug having 100mm height made from M.S . Plate with 3 holes at equal distance on 1.00 No 774.82 RS: Seven Hundred Seventy Four and

circumference for nut-bolts& lock nuts of std. make complete .from 5 thick m.s plate (for top also) suitable Paise Eighty Two only

for 200mm dia pipe.

202 Supply of portland cement 1.00 M.T 6302.00 RS: Six Thousand Three Hundred Two

203 Cement sealing as recommended by Hydrologist ( without cost of cement & by means mud pump ) 1.00 Job 13273.00 RS: Thirteen Thousand Two Hundred

Seventy Three only

204 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having 195.00 RMT 165.21 RS: One Hundred Sixty Five and Paise

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and Twenty One only

clamps including making good the wall, ceiling and floor etc. complete. Pipe shall be concealed or open as

mention in tender description. Pipe shall be as per approved make of GSPHCL make list. 15mm Dia

Item No. Description of Item Qty. Unit In Figure In Word Amount

205 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having 300.00 Rmt 202.97 RS: Two Hundred Two and Paise Ninty

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and Seven only

clamps including making good the wall, ceiling and floor etc. complete. Pipe shall be concealed or open as

mention in tender description. Pipe shall be as per approved make of GSPHCL make list. 20mm Dia

206 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having 94.00 Rmt 247.25 RS: Two Hundred Forty Seven and Paise

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and Twenty Five only

clamps including making good the wall, ceiling and floor etc. complete. Pipe shall be concealed or open as

mention in tender description. Pipe shall be as per approved make of GSPHCL make list. 25mm Dia

207 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having 176.00 Rmt 330.36 RS: Three Hundred Thirty and Paise

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittingswith Thirty Six only

Z patti with 6mm Dia U Clamp with washer for Vertical water supply pipe. Pipe shall be concealed or open

as mention in tender description. Pipe shall be as per approved make of GSPHCL make list 32mm Dia

208 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having 80.00 Rmt 437.66 RS: Four Hundred Thirty Seven and

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittingswith Paise Sixty Six only

Z patti with 6mm Dia U Clamp with washer for Vertical water supply pipe. Pipe shall be concealed or open

as mention in tender description. Pipe shall be as per approved make of GSPHCL make list 40mm Dia

209 Providing and fixing to wall, ceiling and floor trenches CPVC SDR 13.5 (for external work) I.S.I mark of 145.00 RMT 647.30 RS: Six Hundred Forty Seven and Paise

following dia. Tube fitting & clamps will all required fitting such as reducing coupler, Union, band plug, end Thirty only

cap, pipe clip, tee, hex nipple, elbow, coupler etc. complete with using bonding material. Rates are

including of making good the wall ceiling & floor etc. complete. (excavation of earth in trenches & filling will

be paid separately where ever required (A) 50 mm nominal dia.

210 Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE having National 127.00 RMT 1312.94 RS: One Thousand Three Hundred Twelve

Sanitation Foundation (NSF) seal For Portable Water of 65 mm. dia. nominal bor tube fitting and clamps and Paise Ninty Four only

including making good the wall, ceiling and floor etc. Complete

211 Providing laying and jointing in true line and level 65 mm dia. U.P.V.C. Pipe (SCH - 40) line including fittings 45.00 Rmt 468.59 RS: Four Hundred Sixty Eight and Paise

make or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of GI Z Fifty Nine only

Patti with 6mm dia U Clamp with Washer at every two meter C/C or shall be connected as directed

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Item No. Description of Item Qty. Unit In Figure In Word Amount

212 Providing laying and jointing in true line and level 75 mm dia. U.P.V.C. Pipe (SCH - 40) line including fittings 55.00 Rmt 632.44 RS: Six Hundred Thirty Two and Paise

make or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of Forty Four only

clamp at every two meter C/C or shall be connected as directed including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

213 Providing laying and jointing in true line and level 110 mm dia. U.P.V.C. Pipe (SCH - 40) line including 20.00 Rmt 892.30 RS: Eight Hundred Ninty Two and Paise

fittings make or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help Thirty only

of clamp at every two meter C/C or shall be connected as directed including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

214 Providing & fixing in position cowl vent to pipes of 75 mm 5.00 No 16.47 RS: Sixteen and Paise Forty Seven

215 Providing & fixing in position cowl vent to pipes of 110 mm 10.00 No 28.16 RS: Twenty Eight and Paise Sixteen

216 Providing and fixing to wall, ceiling and floor U.PVC SWR (Type-B) Soil Waste Pipe with 'O' Ring 75 mm 180.00 Rmt 264.97 RS: Two Hundred Sixty Four and Paise

dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door, reducer, coupler single Ninty Seven only

'T' with door bend, Vent cowl, G.I. Slotted Z patti of 16 Gauge (minimum1.60mm thick) and minimum 6mm

dia. U Clamp with Washer Nut at every 1.50mt. vertical distance including All Labour Charges etc.

complete and making good the Wall, Ceiling and Floor.

217 Providing & Fixing to Wall Ceilling and Floor SWR (Type B) Rain Water pipe as Per IS-13592 of 90mm Dia. 155.00 RMT 323.15 RS: Three Hundred Twenty Three and

Complete with Special Flings, vent cowl, Compressor type Fittings like G.I. Slotted Z patti of 16 Gauge Paise Fifteen only

(minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical

distance including All Labour Charges etc. complete including making good the Ceilings, Floors and on

terrace. Rain water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the

end near by Ground level. Rate are Inclusive of all Necessary Fittings required for ALL FLOORS.

218 Providing and fixing to wall, ceiling and floor U.PVC SWR (Type B) Soil Waste Pipe with 'O' Ring 110 165.00 Rmt 495.91 RS: Four Hundred Ninty Five and Paise

mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door, reducer, coupler Ninty One only

single 'T' with door bend, vent cowl,G.I. Slotted Z patti of 16 Gauge (minimum1.60mm thick) and minimum

6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical distance including All Labour Charges etc.

complete and making good the Wall, Ceiling and Floor.

219 Providing & Fixing PVC Multi floor Trap with jali of 150 mm diameter with 50 mm water seal with 50 mm 15.00 No 333.79 RS: Three Hundred Thirty Three and

inlets & 75mm outlet including cost of cutting & making the good floor Paise Seventy Nine only

220 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following 10.00 No 552.83 RS: Five Hundred Fifty Two and Paise

nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of Eighty Three only

cutting and making good the walls.

221 Providing & fixing SS Jali Floor Drain Jali For Nanhi Trap including cutting & making good the walls 5.00 No 613.97 RS: Six Hundred Thirteen and Paise

Ninty Seven only

Item No. Description of Item Qty. Unit In Figure In Word Amount

222 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE 5.00 No 201.80 RS: Two Hundred One and Paise Eighty

VALVE Rate are inclusive of all matreials, Labour & Necessary only

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. All material used as per approved make list by

223 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE 10.00 No 416.47 RS: Four Hundred Sixteen and Paise

VALVE Rate are inclusive of all matreials, Labour & Necessary Forty Seven only

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. All material used as per approved make list by

224 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE 8.00 No 311.61 RS: Three Hundred Eleven and Paise

VALVE Rate are inclusive of all matreials, Labour & Necessary Sixty One only

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. All material used as per approved make list by

225 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE 12.00 No 656.86 RS: Six Hundred Fifty Six and Paise

VALVE Rate are inclusive of all matreials, Labour & Necessary Eighty Six only

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. All material used as per approved make list by

226 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE 6.00 No 2302.33 RS: Two Thousand Three Hundred Two

VALVE Rate are inclusive of all matreials, Labour & Necessary and Paise Thirty Three only

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. All material used as per approved make list by

227 Providing , supplying & fixing ISI mark C.I. D/f sluice valves, of following class and diamere including all 4.00 No 2947.00 RS: Two Thousand Nine Hundred Forty

taxes, insurance, transportation, fright charges, octroi, inspection charges loading, unloading conveyance Seven only

to departmental stores, stacking etc, complete.with Laboures charges for 65mm Dia PN-1 with

hand/Wheel cap operated (Alt-1 type Long body)shall be I.S.I heavy duty. Rate are inclusive of Providing &

fixing of Flanges & nut bolts of approved quality in Ground line.

228 Providing , supplying & fixing ISI mark C.I. D/f sluice valves, of following class and diamere including all 2.00 No 3257.00 RS: Three Thousand Two Hundred Fifty

taxes, insurance, transportation, fright charges, octroi, inspection charges loading, unloading conveyance Seven only

to departmental stores, stacking etc, complete.with Laboures charges for 80mm Dia PN-1 with

hand/Wheel cap operated (Alt-1 type Long body)shall be I.S.I heavy duty. Rate are inclusive of Providing &

fixing of Flanges & nut bolts of approved quality in Ground line.

Item No. Description of Item Qty. Unit In Figure In Word Amount

229 Providing,supplying and fixing Corrugated DWC HDPE pipe of Class SN8 Structured Wall polyethelene 15.00 Rmt 396.00 RS: Three Hundred Ninty Six only

Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External

Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage

& Drainage application as per EN:13476-3 including transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance etc. complete. (150 mm ID Dia) Including Lowering, laying and

jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface)

Polyethylene Piping and fittings with the help of coupler ( on line / off line ) attached with one end of pipes,

sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench, laying on the lower bedding (constructed at bottom of

trenches) at prescribed gradient,depth & alignment ,testing the water tightness of the joints, ensuring the

continuity tests of specified pipe segments etc. complete as per drawing,specifications & detailed

engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction

of Engineer-in-charge.

230 Providing,supplying and fixing Corrugated DWC HDPE pipe of Class SN8 Structured Wall polyethelene 40.00 Rmt 771.00 RS: Seven Hundred Seventy One only

Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External

Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage

& Drainage application as per EN:13476-3 including transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance (200 mm ID Dia) Including Lowering, laying and jointing of class

SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and

fittings with the help of coupler ( on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the corrugation at the spigot end, lowering

the same into the trench, laying on the lower bedding (constructed at bottom of trenches) at prescribed

gradient,depth & alignment ,testing the water tightness of the joints, ensuring the continuity tests of

specified pipe segments etc. complete as per drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.

Item No. Description of Item Qty. Unit In Figure In Word Amount

231 Providing,supplying and fixing Corrugated DWC HDPE pipe of Class SN8 Structured Wall polyethelene 35.00 Rmt 1046.00 RS: One Thousand Forty Six only

Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External

Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage

& Drainage application as per EN:13476-3 including transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance (250 mm ID Dia) Including Lowering, laying and jointing of class

SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and

fittings with the help of coupler ( on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the corrugation at the spigot end, lowering

the same into the trench, laying on the lower bedding (constructed at bottom of trenches) at prescribed

gradient,depth & alignment ,testing the water tightness of the joints, ensuring the continuity tests of

specified pipe segments etc. complete as per drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.

232 Consrurting Manhole with RCC TOP SLAB IN 1:2:4 mix (1 cemente :2 corarse sand :4 graded stone 4.00 No 10167.76 RS: Ten Thousand One Hundred Sixty Seven

aggregate 20mm nominal size ) found . Concrete 1:3:6 ( 1 cement :3 corarse sand : 6 brick bats 40 to and Paise Seventy Six only

50mm size ) inside plastering 15mm thick with c.m 1:5 ( 1 cement : 5 corase sand ) finish with a floating

coat of neat cement making channaels in cement concrete 1:2:4 ( 1cement : 2 Coarse sand : 4 stone

aggregate 20mm nominal size) finished smooth complete including curing & testing (i) inside size 900mm x

1200mm including with 230mm thick wall of brick masonary using brick having crushing strenghth not less

then 35 kg/Sqcm in c.m 1:5 for multipurpose pipe line (A- type depth 0.90mt. for multipurpose line ) Rate

are also Inclusive of Providing & fixing precast RCC cover.

233 Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over above item 3.00 No 517.78 RS: Five Hundred Seventeen and Paise

depth from 0.9M to 1.5M. Seventy Eight only

234 Consrurting Manhole with RCC TOP SLAB IN 1:2:4 mix (1 cemente :2 corarse sand :4 graded stone 2.00 No 13715.57 RS: Thirteen Thousand Seven Hundred

aggregate 20mm nominal size ) found . Concrete 1:3:6 ( 1 cement :3 corarse sand : 6 brick bats 40 to Fifteen and Paise Fifty Seven only

50mm size ) inside plastering 15mm thick with c.m 1:5 ( 1 cement : 5 corase sand ) finish with a floating

coat of neat cement making channaels in cement concrete 1:2:4 ( 1cement : 2 Coarse sand : 4 stone

aggregate 20mm nominal size) finished smooth complete including curing & testing (i) inside size 900mm x

1200mm including with 230mm thick wall of brick masonary using brick having crushing strenghth not less

then 35 kg/Sqcm in c.m 1:5 for multipurpose pipe line ( B- type depth 1.50mt. for multipurpose line) Rate

are also iclusive of Provinding and fixing precast RCC cover

235 Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR Part thereof overabove 2.00 No 393.26 RS: Three Hundred Ninty Three and Paise

item for depth from 1.50M. to 2.25M. Twenty Six only

236 Making connection to exsting WATER SUPPLY line including nessesary jointing material and finishing etc. 1.00 No 1472.20 RS: One Thousand Four Hundred Seventy

complete (50 mm to 100 mm) Two and Paise Twenty only

Item No. Description of Item Qty. Unit In Figure In Word Amount

237 Providing and fixing Single headed internal hydrant having outlet of 63 mm dia (2.1/2”) N.B. hydrant 4.00 No 6886.72 RS: Six Thousand Eight Hundred Eighty Six

(IS:5290) (Type-A) landing valve in SS Morris Pattern instanteous coupling type with required hardwares. and Paise Seventy Two only

238 Providing & fixing 63mm dia 15 m long RRL hose pipe with 63mm dia male and femal couplings duly bound 5.00 No 3916.23 RS: Three Thousand Nine Hundred Sixteen

with GI wires, revates etc. confirming to IS 636 (typa-A) as required Stainless steel (grade 304) and Paise Twenty Three only

239 Providing, fixing, testing and commissioning of Weather proof standard fire Hose Cabinet fabricated from 8.00 No 5100.00 RS: Five Thousand One Hundred only

18 guage sheet, floor mounting type having Double Opening with M.S. Fabricated Stand, necessary locking

arrangement by allan key. (750x600x250mm)

240 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, confirming to 8.00 No 7920.84 RS: Seven Thousand Nine Hundred Twenty

IS 884 complete with the following as required. 25 mm nominal int. dia. Water hose thermoplastic (Textile and Paise Eighty Four only

reinforced) type-2 as per IS12585 25 mm nominal internal dia gun metal globe valve and nozzle. Drum and

brackets for fixing the equipment of the wall. Connections from risers with 32 mm dia stop gun metal valve

& MS pipe and socket. 30 m

241 Providing, fixing and testing of Air Vessel made of 250 mm dia, 8 mm thk sheet, 1200 mm in height with air 2.00 No 16279.35 RS: Sixteen Thousand Two Hundred Seventy

release valve in top & connection to riser, drain arrangement with 25 mm GM wheel valve with required Nine and Paise Thirty Five only

accessories, pressure gauge, painting, etc. compelte

242 Providing and fixing of 63 mm SS branch pipe nozzle conforming to IS 903, suitable for instantaneous 8.00 No 2854.62 RS: Two Thousand Eight Hundred Fifty Four

connections to hose coupling etc. as required and Paise Sixty Two only

243 Supplying and fixing specially designed SS 304 orifice plates (minimum 6 mm plate thickness) to be fitted 8.00 No 1204.79 RS: One Thousand Two Hundred Four and

between flange and landing valve of external & internal hydrant outlets of hydrant valves for reducing Paise Seventy Nine only

delivery pressureto 3.5 kg/ sq.cm at hydrant valve

Providing, laying, testing and commissioning of the 'C’ class MS Pipe as per IS1239/3589 i/c fittings like

elbows, tees, flanges, tappers, nuts, bolts, gaskets etc. in ground including welding, excavation & providing

cement concrete blocks as supports, anti corrosive treatment with 4 mm thick anti corrosive pipe protection

244 Bituminous tape with black anti corrosive paint as per IS 10221, refilling the trench etc. of following sizes

complete as required. (Underground piping)

244(A) Providing, laying, testing and commissioning of the 'C’ class MS Pipe as per IS1239/3589 i/c fittings like 15.00 Rmt 4282.61 RS: Four Thousand Two Hundred Eighty Two

elbows, tees, flanges, tappers, nuts, bolts, gaskets etc. in ground including welding, excavation & providing and Paise Sixty One only

cement concrete blocks as supports, anti corrosive treatment with 4 mm thick anti corrosive pipe protection

Bituminous tape with black anti corrosive paint as per IS 10221, refilling the trench etc. of following sizes

complete as required. (Underground piping) (A) 150 mm dia

Item No. Description of Item Qty. Unit In Figure In Word Amount

244(B) Providing, laying, testing and commissioning of the 'C’ class MS Pipe as per IS1239/3589 i/c fittings like 30.00 Rmt 3445.02 RS: Three Thousand Four Hundred Forty

elbows, tees, flanges, tappers, nuts, bolts, gaskets etc. in ground including welding, excavation & providing Five and Paise Two only

cement concrete blocks as supports, anti corrosive treatment with 4 mm thick anti corrosive pipe protection

Bituminous tape with black anti corrosive paint as per IS 10221, refilling the trench etc. of following sizes

complete as required. (Underground piping) (B)100 mm dia.

244(C) Providing, laying, testing and commissioning of the 'C’ class MS Pipe as per IS1239/3589 i/c fittings like 20.00 Rmt 2854.76 RS: Two Thousand Eight Hundred Fifty Four

elbows, tees, flanges, tappers, nuts, bolts, gaskets etc. in ground including welding, excavation & providing and Paise Seventy Six only

cement concrete blocks as supports, anti corrosive treatment with 4 mm thick anti corrosive pipe protection

Bituminous tape with black anti corrosive paint as per IS 10221, refilling the trench etc. of following sizes

complete as required. (Underground piping) (C)80 mm dia.

245 Supplying & fixing single headed external yard hydrant valve with 1 no 63 mm dia instantaneous SS 2.00 No 5564.93 RS: Five Thousand Five Hundred Sixty Four

coupling and CI wheel, ISI marked, confirming to IS 5290 (Type A) with blank gunmetal /SS cap and chain and Paise Ninty Three only

Single headed stainless steel

246 Providing & fixing 63mm dia 15 m long RRL hose pipe with 63mm dia male and femal couplings duly bound 5.00 No 3916.23 RS: Three Thousand Nine Hundred Sixteen

with GI wires, revates etc. confirming to IS 636 (typa-A) as required Stainless steel (grade 304) and Paise Twenty Three only

247 Providing, fixing, testing and commissioning of Weather proof standard fire Hose Cabinet fabricated from 4.00 No 5100.00 RS: Five Thousand One Hundred only

18 guage sheet, floor mounting type having Double Opening with M.S. Fabricated Stand, necessary locking

arrangement by allan key. (750x600x250mm)

248 Supplying and fixing 4 way Fire Brigade service inlet connection of CI body with gun metal instantanoeus 1.00 No 12435.20 RS: Twelve Thousand Four Hundred Thirty

male inlet coupling complete with chain & cap as required for suitable MS pipe (150 mm) connection Five and Paise Twenty only

conforming to IS 904 as required

249 Supplying and fixing 2 way Fire Brigade service inlet connection of CI body with gun metal instantanoeus 1.00 No 6093.41 RS: Six Thousand Ninty Three and Paise

male inlet coupling complete with chain & cap as required for suitable MS pipe (100 mm )connection Forty One only

conforming to IS 904 as required

250 Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

Item No. Description of Item Qty. Unit In Figure In Word Amount

250(A) Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 20.00 RMT 5555.02 RS: Five Thousand Five Hundred Fifty Five

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes and Paise Two only

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

primer. (A)200 mm dia.

250(B) Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 190.00 RMT 3606.90 RS: Three Thousand Six Hundred Six and

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes Paise Ninty only

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

primer. (B)150 mm dia.

250(C) Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 30.00 RMT 2581.50 RS: Two Thousand Five Hundred Eighty One

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes and Paise Fifty only

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

primer. (C)100 mm dia.

250(D) Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 50.00 RMT 1910.39 RS: One Thousand Nine Hundred Ten and

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes Paise Thirty Nine only

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

primer. (D)80 mm dia.

Item No. Description of Item Qty. Unit In Figure In Word Amount

250(E) Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 40.00 RMT 1640.26 RS: One Thousand Six Hundred Forty and

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes Paise Twenty Six only

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

primer. (E) 65 mm dia.

251 Providing, installing testing & commissioning of SS Y-strainers fabricated out of 1.6 mm thick SS grade 2.00 No 19777.59 RS: Ninteen Thousand Seven Hundred

304, sheet with 3 mm dia holes with stainless steel flange Size : 200 mm Seventy Seven and Paise Fifty Nine only

252 Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with bronze/gunmetal

seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes

252(A) Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with bronze/gunmetal 1.00 No 13633.11 RS: Thirteen Thousand Six Hundred Thirty

seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes Three and Paise Eleven only

as required: 200 mm dia

252(B) Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with bronze/gunmetal 4.00 No 8170.27 RS: Eight Thousand One Hundred Seventy

seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes and Paise Twenty Seven only

as required: 150mm dia

252(C) Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with bronze/gunmetal 3.00 No 6101.25 RS: Six Thousand One Hundred One and

seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes Paise Twenty Five only

as required: 100mm dia

252(D) Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with bronze/gunmetal 2.00 No 4536.15 RS: Four Thousand Five Hundred Thirty Six

seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes and Paise Fifteen only

as required:80mm dia

252(E) Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with bronze/gunmetal 2.00 No 3953.93 RS: Three Thousand Nine Hundred Fifty

seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes Three and Paise Ninty Three only

as required:65mm dia

253 Providing, installing testing & commissioning of NRV of following sizes confirming to IS 5312 complete with

rubber gasket, GI bolts, nuts, washers etc. as required.

253(A) Providing, installing testing & commissioning of NRV of following sizes confirming to IS 5312 complete with 3.00 No 15845.08 RS: Fifteen Thousand Eight Hundred Forty

rubber gasket, GI bolts, nuts, washers etc. as required. 150 mm dia Five and Paise Eight only

Item No. Description of Item Qty. Unit In Figure In Word Amount

253(B) Providing, installing testing & commissioning of NRV of following sizes confirming to IS 5312 complete with 2.00 No 9945.68 RS: Nine Thousand Nine Hundred Forty Five

rubber gasket, GI bolts, nuts, washers etc. as required. 100mm dia and Paise Sixty Eight only

253(C) Providing, installing testing & commissioning of NRV of following sizes confirming to IS 5312 complete with 2.00 No 6926.77 RS: Six Thousand Nine Hundred Twenty Six

rubber gasket, GI bolts, nuts, washers etc. as required.80mm dia and Paise Seventy Seven only

253D) Providing, installing testing & commissioning of NRV of following sizes confirming to IS 5312 complete with 1.00 No 5800.62 RS: Five Thousand Eight Hundred and

rubber gasket, GI bolts, nuts, washers etc. as required. 65 mm dia Paise Sixty Two only

254 Providing & fixing of pressure switch in MS pipe line including connection etc. as required. 3.00 No 1400.85 RS: One Thousand Four Hundred and Paise

Eighty Five only

255 150 mm dial Bourdon type Pressure gauge with Syphon tubing, isoltaion valve & mounting accessories 3.00 No 1412.00 RS: One Thousand Four Hundred Twelve

complete Range : 0 - 15 kg/sq.cm. only

256 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air 1.00 No 16279.35 RS: Sixteen Thousand Two Hundred Seventy

release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel Nine and Paise Thirty Five only

valve with required accessories, pressure gauge and painting with synthetic enamle paint of approved

shade as required.

257 Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

257( A ) Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 30.00 No 1306.57 RS: One Thousand Three Hundred Six and

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes Paise Fifty Seven only

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

Item No. Description of Item Qty. Unit In Figure In Word Amount

257(B ) Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 40.00 No 1056.68 RS: One Thousand Fifty Six and Paise

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes Sixty Eight only

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

257(C ) Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 50.00 No 871.90 RS: Eight Hundred Seventy One and Paise

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes Ninty only

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

257(D) Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 250.00 No 772.19 RS: Seven Hundred Seventy Two and Paise

including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes Ninteen only

on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic enamle

paint of required shade complete as required. The work includes makingholes in brick or RCC walls, slabs/

roofs and making good the damages by bringing to the original condition to the satisfaction of the Engineer

in charge, painting two coats of approved shade(Post office red) of enamelpaint over a coat of approved

258 Providing, fixing, testing and commissioning of 15 mm dia quartzoid bulb type sprinklers of ratings 68 60.00 No 503.01 RS: Five Hundred Three and Paise One

degree centigrade with required accessories: only

Pendent sprinkler

259 SITC of test & drain assembly with all piping, sight glass, 25mm dia. test & drain valve etc complete 10.00 No 6869.73 RS: Six Thousand Eight Hundred Sixty Nine

and Paise Seventy Three only

260 Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with bronze/gunmetal

seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes

260(A) Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with bronze/gunmetal 2.00 No 4536.15 RS: Four Thousand Five Hundred Thirty Six

seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes and Paise Fifteen only

as required: 80 mm

260(B) Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with bronze/gunmetal 3.00 No 3452.30 RS: Three Thousand Four Hundred Fifty Two

seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes and Paise Thirty only

as required: 50 mm

Item No. Description of Item Qty. Unit In Figure In Word Amount

261 Providing and fixing flow switches on MS pipe including connections etc. as required.50 mm dia. 10.00 No 2521.38 RS: Two Thousand Five Hundred Twenty

One and Paise Thirty Eight only

262 Supplying and installation of minimum 46 mm thick Fire rated door as per IS 110.00 SMT 11740.27 RS: Eleven Thousand Seven Hundred Forty

3614-2021 standards made by galvanized steel conforming to 15 277 Fire door tested at CBR/NABL and Paise Twenty Seven only

approved labs for maximum rating of 2 hrs tested. Test certificate submitted shall be with in the validity

period of 15 years.The frame and shutter are finished with powder coating of 60 micron of approved colour

with all necessary fittings (Fire door make approved by GSPHCL)

263 Providing Supplying and Fixing S4 Channel System (S4 Channel + Profile Bracket + U Bolt Rubber 80.00 No 421.58 RS: Four Hundred Twenty One and Paise

mounted System) for multiple Pipes for External Vertical Fixed line with wall distance 3" ncluding nuts, Fifty Eight only

bolts, fastners etc complete as per detailed Specifications and as directed by Engineer in Charge.

264 Providing Supplying and Fixing Single Pipe Bracket System with U Bolt Rubber mounted for Pipe 255.00 No 182.83 RS: One Hundred Eighty Two and Paise

Supporting Clamping System for External Vertical Fixed line with wall distance 3" including nuts, bolts, Eighty Three only

fastners etc complete as per detailed Specifications and as directed by Engineer in Charge.

265 Providing & Fixing fire resistant barrier in duct openings at slab level with fire stop sealant, having minimum 38.00 SMT 14088.98 RS: Fourteen Thousand Eighty Eight and

2-hour fire rating, in compliance with NBC 2016 code Paise Ninty Eight only

Item No. Description of Item Qty. Unit In Figure In Word Amount

266 Getting provisional NOC and Final NOC and Renewal of NOC (During Defect Liability Period) for Fire 1.00 JOB 16950.00 RS: Sixteen Thousand Nine Hundred Fifty

Hydrant, Sprinkler system, Fire Extinguisher, Fire alarm system etc. from local fire authority or any other only

relevant statutory authority at initial stage and required various other stages of construction work, including

preparation of reports/drawings as per fire authority requirement. Rate also includes renewal of Fire NOC

during defectliability period as per requirement. Main agency has to give demonstration of all fire system to

fire officer police / concern beneficiaries & GSPHCL Agency has to submit FDR of approved bank as per

clause 2.0, section 3, of Rs 20000.00 Or Quoted rate which ever is higher to GSPHCL for minimum

maturitperiod of Four yearsin favour of GSPHC, which will be released after Successful Submitting of All

Fire NOC at the completion of defect liability period. Renewal Fire N.O.C. shall be submitted final

S.D.proposal. Agency hasto bornecharges like preparing and submission of allthe documents,

Photographs, CD/DVD required to get the N.O.C. from concern fire department and also liaisoning work

with concern departments. Main civil agency has to get the pre-NOC from fire & emergency department

well before starting civil & the fire hydrant work including sump & pumproom work. For that professional &

experience fire agency has to prepare drawing of fire hydrant system, sprinkler system, fire alarm system,

DG set etc as per tender item and making floor layout of all fire pump panel, cable earthing etc in pump

room. If any changes required in drawings of sump & pump room. Main agency has to inform in written

before excavation of pump & sump room. Agency has to calculate the total head & discharge required as

per NBC/local fire office requirement and as per site situation and submit fire pump OEM specification

curve foundation detail etc & get approval of cable, panel drawings & specification. After completion of fire

hydraunt related work as per pre-NOC, tender specification & drawing approved by fire department, agency

has to do site visit with fire department & give the testing & demonstration to fire officer & get the final NOC

before handing over of the building. Agency has to give live testing & demonstration of all system to

GSPHCL & police department jointly. For fire NOC fee separate item is taken in tender Agency has to

quote the rate as per latest Gazettein respective tender item.

Item No. Description of Item Qty. Unit In Figure In Word Amount

267 providing and corrogulated JSW pre coated sheet roofing fixed withh galvanised iron J or L hooks, bolts 138.00 SMT 977.38 RS: Nine Hundred Seventy Seven and

and Nuts 8 mm dia with bitumin and G.I. Limpet washer or G.I. limpet washer with white lead complete Paise Thirty Eight only

excluding the cost of Purlines , rafters and trusses(0.60mm thick)

Total Civil Amount Rs......A

268a Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC 560.00 Point 481.00 RS: Four Hundred Eighty One

insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for earth continuity only

in FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution erected on/in Brick Wall / slab along with continuous G.I.

fish wire to draw wires and laid in approved manner zari for PVC pipe and boxes shall be filled

with cement mortar and finishing the surface to match the wall / ceiling complete with approved

make 5/6 Amp. ISI make modular type switch and accessories mounted in 20 G. G.I. company

fabricated metallic box covered with appropriate front plate modules erected flushed with wall /

ceiling with necessary modular lamp holder / modular ceiling rose / HD Connector (make & model

approved by EIC and matching colur with switches accessories) (Deep Junction box 75mm depth

if required) as directed for concealed wiring. Light point. Cat.-III.

Necessary sheet / tape / polythene / sand must be erected or filled in all box to prevent mortar

going into the box. Length of point wiring must not increase than 10 mtr. For that necessary switch

boards and their locations must be finalised before execution by agency otherwise payment will

not be done for extra long point. (For future extention, if required, agency has to erect one higher

size metal box and modular plate as per instruction of EIC. Cost of blank plate shall be paid as per

tender item) [This item include cleaning (inside/outside) of all G.I. switch boards, electric point

box, fan box, MCBDB & box cutting plaster finishing for modular plate without any gap] [conductor

resistance should be as per IS:8130/1984]

268b For Secondary Light Point, Cat.-III 110.00 point 166.00 RS: One Hundred Sixty Six only

268c For Bell Point, Cat.-III 20.00 Point 481.00 RS: Four Hundred Eighty One

268d For Fan Point.(with 6A Modular type switch and Two Module hum free 5/6 step EME step type 200.00 Point 668.00 RS: Six Hundred Sixty Eight only

Electronic fan regulator both having ISI Make ) Cat-III

268e For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat. III 80.00 Point 505.00 RS: Five Hundred Five only

Item No. Description of Item Qty. Unit In Figure In Word Amount

268f For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat. III 200.00 Point 255.00 RS: Two Hundred Fifty Five only

269 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 sq.mm 20.00 Point 738.00 RS: Seven Hundred Thirty Eight

copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS wire for only

earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe with PVC fitting fixed with adhesive solution erected in wall/slab along with

continuous G. I. fish wire to draw wires and laid in approved manner zari for PVC pipe & boxes

shall be filled with cement mortar & finishing the surface to match the wall / ceiling complete with

16 Amp Modular type Swich and accessories mounted in 20 G. GI company fabricated metallic

box covered with appropriate front plate modules erected flushed with wall. (a) 16 Amp. Indicator

switch & 1 No. 6/16 A universal socket white colour suitable for 3/5 pin top duly both having ISI

mark. (Necessary sheet / tape / polythene / sand must be erected or filled in all box To Prevent

Mortor Going In To The Box) Cat.-III. (Conductor resistance should be as per IS:8130/1984)

270 Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv 2 x 4.0 sq.mm copper 15.00 Point 991.00 RS: Nine Hundred Ninty One only

PVC insulated FRLS wire with 2.5 sq.mm (green) copper PVC insulated FRLS wire for earth

continuity in FIA approved ISI mark white colour medium class 20/ 25 mm dia. embossed rigid

PVC pipe with PVC fitting fixed with adhesive solution erected in wall/slab along with continuous

G. I. fish wire to draw wires and laid in approved manner.zari for PVC pipe & boxes shall be filled

with cement mortar & finishing the surface to match the wall / ceiling complete with 1 No 25 Amp

Modular type Single pole MCB Swich and 1 no 25A universal 3 pin socket suitable for 3 pin top

duty both having ISI mark .mounted in 20 G. GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall.Above accessories will be erected

combined or separately as per site requirement and instruction of EIC. (conductor resistence

should be as per IS:8130/1984 Cat III (Gyser Point) (Necessary sheet / tape / polythene / sand

must be erected or filled in all box to Prevent Mortor Going In to The Box)

Item No. Description of Item Qty. Unit In Figure In Word Amount

271 Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 sq.mm 15.00 Point 863.00 RS: Eight Hundred Sixty Three

copper PVC insulated FRLS wire with 2.5 sq.mm (green) copper PVC insulated FRLS wire for only

earth continuity in FIA approved ISI mark white colour medium class 25 mm dia. embossed

rigid PVC pipe with PVC fitting fixed with adhesive solution erected in wall / slab along with

continuous G.I. fish wire to draw wires and laid in approved manner. zari for PVC pipe & boxes

shall be filled with cement mortar & finishing the surface to match the wall / ceiling complete with

approved make 20 Amp. Modular type indicator switch and accessories mounted in 20 SWG GI

company fabricated metallic box covered with appropriate front plate modules erected flushed

with wall / ceiling. (a) 20 Amp Indicator switch & 1 No. 20 A universal socket white colour suitable

for 3 pin top duly both having ISI mark (A.C POINT ONLY) CAT III (Necessary sheet / tape /

polythene / sand must be erected or filled in all box to Prevent Mortor Going In to The Box)

272a Providing following type of Modular Type Accessories mounted with 20 G company fabricated 10.00 Each 159.00 RS: One Hundred Fifty Nine only

metalic box, single mounting base frame covered with textured / metallic front plate, modules

erected with necessary connection. As desired by Engineer in charge. For TV Co-axial Socket

outlet. Cat.-III

272b Two pin / RJ-11Telephone Socket (For One Gang) Cat III 60.00 Each 159.00 RS: One Hundred Fifty Nine only

272c Blank Plate Single. Cat.-III 500.00 Each 25.00 RS: Twenty Five only

272d Modem Jack for Computer Open RJ-45 Cat III 60.00 Each 159.00 RS: One Hundred Fifty Nine only

272e 16Amp. Universal socket. Cat.-III (For AC Points) 5.00 Each 198.00 RS: One Hundred Ninty Eight

272f 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete Cat.-III 5.00 Each 493.00 RS: Four Hundred Ninty Three

272g Modular indicating call bell Cat.-III 20.00 Each 326.00 RS: Three Hundred Twenty Six

272h Modular Buzzer Cat.-III 10.00 Each 148.00 RS: One Hundred Forty Eight

273 Providing & erecting Switch board for Computer or electric apparatus consisting of following 60.00 Each 1122.00 RS: One Thousand One Hundred

items in single board erected on Metal board with 3 mm thick PC (Polycarbonet) / Acrylic sheet Twenty Two only

erected as directed. 2 no. 6/16 Amp. universal Socket, 2 nos. 16 Amp. indicator switch, 2 nos.

Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For Computer power Supply board. Cat.-III.

274 Providing & erecting Modular type accessories mounted on 20 G. G.I. company Fabricated 10.00 Each 788.00 RS: Seven Hundred Eighty Eight

Galvanised Metal box covered with appropriate front plate modules erected flushed with wall / only

ceiling with 1 nos TV socket, 1 nos of 16 Amp. SP switch & 3 nos. of 6 Amp. 3/5 - pin plug: Cat-III

(For TV Switch Board)

Item No. Description of Item Qty. Unit In Figure In Word Amount

275a Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID 2500.00 Mtr. 24.00 RS: Twenty Four only

PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia. For 20 mm. dia.

275b For 25 mm. dia. 2850.00 Mtr. 33.00 RS: Thirty Three only

276a Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with FIA 3000.00 Mtr. 62.00 RS: Sixty Two only

approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution to be erected on/in brick wall / slab along with continuous G. I. fish

wire to draw mains laid in approved manner with plastering by cement mortar & finishing the

surface to match the wall / ceiling complete with FRLS PVC insulated wire for earth continuity.

(Approved ISI make only) (Conductor resistance should be as per IS:8130/1984 ) [a] 2 x

sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi

stranded conductor for earthing as per standard colour code. (with 20 mm dia. PVC pipe) [Wire

must be having box packing]

276b For 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper 1200.00 Mtr. 82.00 RS: Eighty Two only

multi stranded conductor for earthing as per standard colour code. (with 20/25 mm dia. PVC pipe)

[Wire must be having box packing] (Conductor resistance should be as per IS:8130/1984 )

276c For 2 x 4.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper 350.00 Mtr. 111.00 RS: One Hundred Eleven only

multi stranded conductor for earthing as per standard colour code. (with 20/25 mm dia. PVC pipe)

[Wire must be having box packing] (Conductor resistance should be as per IS:8130/1984 )

276d For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper 800.00 Mtr. 146.00 RS: One Hundred Forty Six only

multi stranded conductor for earthing as per standard colour code. (with 25 mm dia. PVC pipe)

[Wire must be having box packing] (Conductor resistance should be as per IS:8130/1984 )

276e For 4 x 10.0 sq.mm. FRLS copper multi stranded conductor mains with 4.00 sq.mm. FRLS 150.00 Mtr. 421.00 RS: Four Hundred Twenty One

copper multi stranded conductor for earthing..As per standard colour code. (with 25/32 mm dia. only

PVC pipe) (Conductor resistance should be as per IS:8130/1984 )

277 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, 60.00 Mtr. 37.00 RS: Thirty Seven only

PVC bushes saddle, Check-nuts etc. complete of following sizes.

278 Providing & erecting following size of TV Co-axial flexible cable comprising inner conductor of 350.00 Mtr. 39.00 RS: Thirty Nine only

solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film

bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. for RG-6

[Polycab/ Finolex / RR Kabel Make]

Item No. Description of Item Qty. Unit In Figure In Word Amount

279a Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft 8.00 Each 7025.00 RS: Seven Thousand Twenty Five

soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made from only

Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed

Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size:

70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must be pressed

and gave rectangular shape so its work as a terminal.The hot deep galvanising must be done

after above process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:-

2 no.with washer suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time

Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth

and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit

all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with

earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between

neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing

must be done in the presence of A.E. (GSPHCL)]

279b For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in 8.00 Each 276.00 RS: Two Hundred Seventy Six

earth pit (certificate for soil have to given by DEE / AE along with photographs) only

280 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air 3.00 Each 9323.00 RS: Nine Thousand Three Hundred

Termination Base tested for conditioning, Ageing Test & Lightning impulse current withstand test: Twenty Three only

100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC

62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized as per EIC (OBBO,

JEF, CAPE, DHEN)

Item No. Description of Item Qty. Unit In Figure In Word Amount

281 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 300.00 Mtr 297.00 RS: Two Hundred Ninty Seven

2 conducted in the Govt. accredited thirty party laboratory to meet the requirement of IS/IEC only

62305 with Required Accessories - Aluminium Holding clamp at every 0.50 mtr distance,Press Fit

Aluminium/SS/Polymide cross splicer at every crossing of Alu. conductor, Expansion piece with

connectors at every 20 mtr distance, Aluminium straight Splicer to connect conductors. All

Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test &

6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical

test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to

meet the requirements of IS/IEC

282 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as 300.00 Mtr 153.00 RS: One Hundred Fifty Three only

required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used exclusively

for lightning protection earthing system and ring equipotential bonding. [make and model approved

by EIC strictly as per tender specification]

283 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron 6.00 Per Set 5933.00 RS: Five Thousand Nine Hundred

copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as per IEC 62561- Thirty Three only

7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly

rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions:

254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). [make and model approved by EIC

strictly as per tender specification]

284 Supplying and erecting 8W led lamps with following wattage capacity of 220 to 240 voltage, 60.00 Each 111.00 RS: One Hundred Eleven only

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 LED Lamps integral type, with PC

diffuser suitable LAMP holder

Item No. Description of Item Qty. Unit In Figure In Word Amount

285 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of wattage 0.2W to 310.00 Each 370.00 RS: Three Hundred Seventy only

0.5W assemble on single MCPCB with housing use as a heat sink shall be made from Aluminum

extrusion having enough strength (sample must be approved by EIC) with polycarbonate diffuser

with following specification: (A) Company mark/name on the fitting.(B) Rated input voltage and

frequency: 220V to 240 VAC ; 50Hz.(C) Rated input wattage: max. 24w(D) Rated input current :

(E) Power Factor : Min. 0.90(F) ATHD : Max. 15%(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min.

Hrs @ L70(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge protection :

(N) IP rating: IP 20(O) IK rating : IK 02(P) Short circuit , Open circuit & Reverse Polarity Protection

must be provided(Q) Fixing clamp design & strength should be sufficient to hold the fitting erected

on wall or ceiling.(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture) [Approval will be given strictly subject to item

286 SITC of Indoor Commercial recess/surface mounted (IP20) Max. 24 w Cool/warm white Color 270.00 Each 751.00 RS: Seven Hundred Fifty One

LED Down lighter office Lighting Luminaire with external separate driver having BIS certification only

with fully die cast aluminium alloy housing without any PVC/Plastic part with corrosion resistant

powder coated finish as a heat sink with Poly Carbonet diffuser LED complete (only from Philips

Lumileds, CREE, BridgLux, Seoul, Nichia & Osram CRI > 80, CCT 5600K (5400 to 5800K bin).

The led's should be mounted onbacklit Metal core based PCB for better heat conduction and long

life of LED. (LM 79 for complete fixture, LM80 for individual LED Report mustbe submitted) The

fixture should have extra protection of driver like over/under voltage, THD<15%, P.F.>0.90, for

w fixture wide voltage range from 100 to 270 V, 50/60 HZ, 4 KV surge protection.

Fixure must have Min. 2160 Lumens light output. Fixture Efficacy should be>=90 Lumens/watt.

(L70 @ 30,000 Hrs) The Fixture should be able to easily mount on POP/Grid False cieling. The

Luminiare should be tested as per IP20 standards and following test reports should be

submittedat the time of approval. Model Approved By EIC as per Specification only (Note:- The

manufacturer/authorized Channel partner/dealer of the manufacturer has to give a 5 yrs. free

replcement Guarantee for complete Fixture)

Item No. Description of Item Qty. Unit In Figure In Word Amount

287 SITC of Indoor Commercial recess/surface mounted (IP20) Max. 18 w Cool/warm white Color 90.00 Each 584.00 RS: Five Hundred Eighty Four

LED Down lighter office Lighting Luminaire with external separate driver having BIS certification only

with fully die cast aluminium alloy housing without any PVC/Plastic part with corrosion resistant

powder coated finish as a heat sink with Poly Carbonet diffuser LED complete (only from Philips

Lumileds, CREE, BridgLux, Seoul, Nichia & Osram CRI > 80, CCT 5600K (5400 to 5800K bin).

The led's should be mounted on Metal core based PCB for better heat conduction and long life of

LED. (LM 79 for complete fixture, LM80 for individual LED Report mustbe submitted) The fixture

should have extra protection of driver like over/under voltage, THD<15%, P.F.>0.90, for 18 w

fixture wide voltage range from 100 to 270 V, 50/60 HZ, 4 KV surge protection.

Fixure must have Min. 1620 Lumens light output. Fixture Efficacy should be>=90 Lumens/watt.

(L70 @ 30,000 Hrs) The Fixture should be able to easily mount on POP/Grid False cieling. The

Luminiare should be tested as per IP20 standards and following test reports should be

submittedat the time of approval. Model Approved By EIC as per Specification only (Note:- The

manufacturer/authorized Channel partner/dealer of the manufacturer has to give a 5 yrs. free

replcement Guarantee for complete Fixture)

288 Providing and erecting max. 10 W LED battern having main housing aluminium extruded and front 10.00 Each 309.00 RS: Three Hundred Nine only

cover of polycarbonate. Electrically and photomatry parameters are as under:240 V, 50 Hz.

System wattage.:10W+10%, PF>=0.95, system lumens min. 1000, CCT- 3000K to 6500K,

CRI>=80, THD<=15%, Delivery efficiency>=85%, LM 80 certified LED, 30000 Hrs@ L70,

Electronic CC driver, insulated copper wire, for internal wiring, IP20 Operating voltage:160 to

V, Surge-2 KV, length of this fitting should be 2ft.

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.) Tube Light with integral driver 8 Watts, Surge-2 KV, IP-20, conventional 1 to

289 Providing and erecting PVC body surface mounting LED Bulk head type 9 watt Lighting Fitting 5.00 Each 780.00 RS: Seven Hundred Eighty only

with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen output from luminaire

lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having

efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame with Beam Angle

Item No. Description of Item Qty. Unit In Figure In Word Amount

290 supplying & erecting 30 W LED POST TOP LATTERN fitting with high power white LEDs wattage 5.00 Each 4052.00 RS: Four Thousand Fifty Two

of 1 ww and above assebled on single MCPCB's effiency more than 130 lumens per watt and only

corrosion free high pressure diecast alluminium housing with smooth finish powder caoted and

heat sink extruded alluminium with difuser and poly carbonate optics/ lences with compny mark /

name /engraved or embossed 120 to 300 volt, power factor more than 0.95, THD < 10%, CCT

5000K to 5700K , Uniformity ratio > 0.45, Luminure efficency Min 110 lumens per watt. LED Driver

efficency > 85%. Cree/osram/philips Lumileds/Nichia /Seoul/Bridge Lux (USA) make LED used

for luminare ( Each Fitting required LM 79 and LM-80 certificates) (B) Flood Light(IP-65)Surge-

10KV.(E)Post Top Latern LED Fitting Comprises of 650 MM TOP diameter 120 degree beam

angle with 3 Nos supporting ribs proposed for garden & Promenade. maximum 40 WATT, (Note:-

The manufacturer/authorized Channel partner of the manufacturer has to submit 5yrs free

replcement Guarantee for complete Fixture)

291 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan 200.00 Each 2603.00 RS: Two Thousand Six Hundred Three

with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, only

Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum

CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, compitible with electronic

regulator unit for Speed Control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier

circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing

etc. Complete as required.[ Make shall be approved by Engineer in Charge] (A) 1200 mm Sweep

292 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC bars up to 50 mm 210.00 Each 125.00 RS: One Hundred Twenty Five

Length each side & piereced through 18 Gauge G.I Box having 125 mm dia depth of 75 mm only

complete erected concealed in ceiling with necessary modular plate / sheet

293 Supplying and erecting approved make oscillating type medium duty bracket fan with Aluminium 5.00 Each 3484.00 RS: Three Thousand Four Hundred

Blades A.C. 23OV. 50cy/s, with thermal overload protection wall mounted with height adjustment Eighty Four only

and rotary tilting device complete with guard, pull cord for speed and oscillation flexible Core plug

top complete erected with lead wires as directed. For 450 mm sweep ( Make:- Bajaj ,Usha,

Crompton, Orient, Havells)

Item No. Description of Item Qty. Unit In Figure In Word Amount

294 Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe /M.S. Pipe down rod erected 100.00 Rn. Mtr. 107.00 RS: One Hundred Seven only

duly painted for fan complete with necessary 24/0.2 flat 3 core flexible cable with earthing.The

Down rod thickness,hole,locking arrangement,construction,power coating,colour shed should be

same as original down rod brought with ceiling fan.For that agency has to give original down road

sample to fabricator and one sample down rod should be approved with EIC .After approval given

by EIC agency can use the down rod as per approved sample.If without approval down rod will be

erect on site,agency has to replace them with own cost

295 Supplying and erecting approved make 200mm sweep low noise decorative exhaust fan having 25.00 Each 1687.00 RS: One Thousand Six Hundred Eighty

Aerodynamically designed and Blanced Blade, Blade finish Opaque,body colour White , finish Seven only

Glossy , Rated Speed 1800/1350 revolution per minute ,air delivery 500m³ / hr , noise level

dB , Power Consumption 35 W, ,Rated Voltage 230 V , no. of blades 7 , guard 18 Louvers

square frame ABS body with inbuilt lowers and square frame.( Havell s Make Ventilair LX or

Bajaj, Usha, Crompton and Equivalent Model Approved by EIC subject to Above Specification )

296 Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty 5.00 Each 3052.00 RS: Three Thousand Fifty Two

ring mounted low noise operation suitable for medium duty having following dia size and maximum only

speed:380 mm dia 1400 RPM

297 Providing & Erecting Decorative Dig Dong bell Stereo type 250 Volt complete erected on existing 20.00 Each 170.00 RS: One Hundred Seventy only

polished wooden block or in M.S. box with 3mm thick white ISI mark laminated sheet. (Anchor-

Chime model,Rider,Vision)

298 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red oxide be concealed 1000.00 Sq. Inch 5.94 RS: Five and Paise Ninty Four

in wall with necessary plastering & finishing with 3 mm thick laminated sheet with grooving as only

directed of following depth 3" depth.

Item No. Description of Item Qty. Unit In Figure In Word Amount

299 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type 10.00 Sq. Mtr. 16230.00 RS: Sixteen Thousand Two Hundred

cubical panel board having IP-42 & above protection as per approval from engineer incharge and Thirty only

made from 2 mm. thick CRC M.S. sheet for outer body & doors, 1.6 mm. thick CRC M.S. sheet for

internal partitions with necessary supporting angles, flats including skirting, bending, drilling,

welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-

In-Charge with erection of supplied switchgears, busbars with suitable size of interconnecting

PVC copper wire / Copper-Aluminium strips, rubber gromets, rib, control wires, backelite control

fuses, measuring instruments, earth bus & earth bolts, foundation flange-bolts-base plates,

sufficient nos. of hinged doors, handle with locking arrangement, rubber gasket complete with

Required Nos. heavy Duty Connector with Cadmium plated nut and bolt for Anti rusting. The panel

shall be supplied with Seven Tank chemical process which shall be carried out before applying

painting, painted with powder coating. (The rates excludes the cost of switchgears, busbars,

interconnecting mains & Copper / Aluminium strip, fuse, meters etc. The dimension shall be

measured excluding base beams) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory as per IEC 61439 and shall be certified by that company

whose switch gears are used after fabrication for beneficial use. With 350 mm depth

Panel manufacturer have to give 5 years maintenance and service support if in case of breakdown

or fault. Panel manufacturer have to submit electrical meter calibration report. Agency should

design the panel in such a way that there should not be any excess in panel area (sq.mtr) & length

of bus-bar (mtr), if any excess occurs draw attention to GSPHCL at the time of approval of G.A.

Loading and unloading of above item shall be done by hydra and skill work force under

supervision of electrical engineer and guidelines given by manufacturer to avoid damage to the

item. Picture of it to be submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by agency's engineer before giving

order. If found any problem in size discuss with GSPHCL engineer for rectification before giving

order. [Including Necessary numbering / marking on PANEL done with red colour radium sticker

as per site requirement and instructions given by EIC on site. Font / number size given by EIC on

site as per requirement] (All Panel as per IEC 61439 as per NBC Guideline) [Manufacturer must

be of Gujarat state so three stage inspection can be done]

Item No. Description of Item Qty. Unit In Figure In Word Amount

300 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated outdoor 5.00 Sq. Mtr. 17777.00 RS: Seventeen Thousand Seven

type double door cubical panel board necessary IP-54 and above protection as per require made Hundred Seventy Seven only

from 2 mm. thick CRC M.S. sheet for outer body & doors, 1.5 mm. thick CRC M.S. sheet for

internal partitions with necessary supporting angles, flats including skirting, bending, drilling,

welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-

In-Charge with erection of supplied switchgears, busbars with suitable size of interconnecting

PVC copper wire / Copper-Aluminium strips, rubber gromets, rib, control wires, backelite control

fuses, measuring instruments, earth bus & earth bolts, foundation flange-bolts-base plates,

sufficient nos. of hinged doors, handle with locking arrangement, rubber gasket complete with

Required Nos. heavy Duty Connector. heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete.The panel shall be supplied with Seven Tank

chemical process which shall be carried out before applying painting, painted with powder coating.

(The rates excludes the cost of switchgears, busbars, interconnecting mains & Copper /

Aluminium strip, fuse, meters etc. The dimension shall be measured excluding base beams)

Factory inspection for verification of quality,workmanship and as per drawing & testing before

dispatch the material as per tender condition. The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory as per IEC 61439 and shall be certified by that

company whose switch gears are used after fabrication for beneficial use. With 350 mm depth

Panel manufacturer have to give 5 years maintenance and service support if in case of breakdown

or fault. Panel manufacturer have to submit electrical meter calibration report. Agency should

design the panel in such a way that there should not be any excess in panel area (sq.mtr) & length

of bus bar (mtr), if any excess occurs draw attention to GSPHCL at the time of approval of G.A.

drawing. Loading and unloading of above item shall be done by hydra and skill work force under

supervision of electrical engineer and guidelines given by manufacturer to avoid damage to the

item. Picture of it to be submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by agency's engineer before giving

order. If found any problem in size discuss with GSPHCL engineer for rectification before giving

order. [Including Necessary numbering / marking on PANEL done with red colour radium sticker

as per site requirement and instructions given by EIC on site. Font / number size given by EIC on

site as per requirement]

Item No. Description of Item Qty. Unit In Figure In Word Amount

301a Supplying and erecting tripple pole & neutral 440V / 500 V Panel mounting Copper Busbars with 2.00 Rn. mtr. 3171.00 RS: Three Thousand One Hundred

four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated Seventy One only

current / cross section area) duly wraped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary bus bar supports / insulators, main

cable socket to each bar, erected in existing cubical panel with necessary connections.For

electrolyte copper busbars Suitable for 200 Amp. capacity

301b Suitable for 300 Amp. capacity 4.00 Rn. mtr. 4861.00 RS: Four Thousand Eight Hundred

301c Suitable for 100 Amp. capacity 2.00 Rn. mtr. 1942.00 RS: One Thousand Nine Hundred

302a Supplying & erecting approved make Four Pole 415 V change over switch interior for panel 3.00 Each 13221.00 RS: Thirteen Thousand Two Hundred

mounting with operating mechanism A.C.23 duty confirming to IS For 250Amp FP. Cat III Twenty One only

302b For 63A FP C/O Switch 1.00 Each 4738.00 RS: Four Thousand Seven Hundred

Thirty Eight only

303 Providing and erecting Approved make Four Pole moulded case circuit breaker having breaking 5.00 Each 20739.00 RS: Twenty Thousand Seven Hundred

capacity/strength ICU of 50 K.A. and above at 415 V. having Normal current rating 250A.with Thirty Nine only

variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only.

304 Providing & Erecting Approved make Four pole moulded case circuit breaker having breaking 9.00 Each 6112.00 RS: Six Thousand One Hundred

capacity ICU of 25 K.A. at 415 V,having normal current rating up to 25 A to 100 A. with Twelve only

Variable/Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal

connections spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100%

305 Providing & Erecting Approved make Four pole moulded case circuit breaker having breaking 2.00 Each 7976.00 RS: Seven Thousand Nine Hundred

capacity ICU of 35 K.A. at 415 V. having normal current rating 125A. with Fixed/Variable thermal Seventy Six only

& magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections spreader

tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

306 Providing and erecting following additional parts for panel mounting MCCBs (A)Extended 16.00 Each 865.00 RS: Eight Hundred Sixty Five only

operating rotary handle with pad lock with three position trip,off,on suitable for 25A to 250 A panel

mounting cat-III(Company must be same company of switchgear)

307 Providing & Erecting Approved make Earth fault Relay suitable to mount with inter connection to 3.00 Each 5362.00 RS: Five Thousand Three Hundred

moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220 Sixty Two only

V AC with all internal connections & complete erected in existing M.S.housing. For 250 A - 400 A,

Item No. Description of Item Qty. Unit In Figure In Word Amount

308 Supplying, erecting, testing and commissioning of approved make panel mounting type Digital 3.00 Each 1263.00 RS: One Thousand Two Hundred Sixty

Voltmeter having 3 digits LED display 0 to 750 AC Volts range having 0.5 Class accuracy erected Three only

on existing panel board with all connection, wiring ete., with manufacturers calibration certificate.

309 Supplying, erecting, testing and commissioning of approved make panel mounting type Digital 3.00 Each 1543.00 RS: One Thousand Five Hundred Forty

Ammeter having 3 digits LED display, external CT operated, calibrated for 0 to 400 Amps. suitable Three only

to operate on 500 volt AC having 0.5 Class accuracy erected on existing panel board with all

connection wiring ete., with manufacturers calibration certificate.

310 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on 6.00 Each 314.00 RS: Three Hundred Fourteen

existing panel board with necessary connections. only

311 Supplying and erecting approved make set of indicator lamps of LED type lamp, lense cover, 9.00 Each 43.00 RS: Forty Three only

Bakelite holder complete erected with necessary connections.

312 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden 10.00 Each 272.00 RS: Two Hundred Seventy Two

havong 0.5 class accuracy erected in existing CRCA box duly secured with insulating materials only

connected to the meter

313 Providing & erecting Miniature circuit breaker single pole 6 Amp. to 32 Amp. suitable to operate on 18.00 Each 111.00 RS: One Hundred Eleven only

240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming

to IS 8828/1996 with ISI Mark.

314 Providing & erecting 240 V MCB Double pole switch for Motor and inductive load (C curve) having 25.00 Each 327.00 RS: Three Hundred Twenty Seven

10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having following capacity. For only

315 Providing and erecting 240 volt MCB double pole switch for M&I(C Curve) having 10 KA Breaking 5.00 Each 297.00 RS: Two Hundred Ninty Seven

capacity and confirms to IS : 8828 in existing with earthing terminal having following capacity. only

For 6-32 Amp Capacity.

316a Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 5.00 Each 730.00 RS: Seven Hundred Thirty only

breaking capacity & confirms to IS :8828 in existing box having following capacity. For 63 Amp FP.

316b For 40A FP MCB 4.00 Each 662.00 RS: Six Hundred Sixty Two only

317 Providing & erecting 240 V MCB Double pole switch for Motor and inductive load (C curve) having 2.00 Each 502.00 RS: Five Hundred Two only

10 KA breaking capacity & confirms to IS:8828 with same company metal box with earthing

terminal having following capacity with necessary Numbering with oil Paint by painter. For 40 Amp

318 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 2.00 Each 905.00 RS: Nine Hundred Five only

breaking capacity & confirms to IS :8828 with same company metal box with earthing terminal

having following capacity with necessary Numbering with oil Paint by painter. For 63 Amp

319a Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly 5.00 Each 272.00 RS: Two Hundred Seventy Two

powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following only

type of RCCB, RCCB + MCB with necessary numbering / marking with oil Paint by painter. For

pole [Box must be of same company as MCB, ELCB used]

Item No. Description of Item Qty. Unit In Figure In Word Amount

319b For 4 pole [Box must be of same company as MCB, ELCB used] 5.00 Each 442.00 RS: Four Hundred Forty Two only

320a Providing and Erecting approved make ELCBs / RCCBs conforming to IS: 12640 and having 6.00 Each 2213.00 RS: Two Thousand Two Hundred

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on Thirteen only

single phase 240 V. having characteristic of quick action & tripping with all advance feature & do

not incorporate any electronic component. for following Max. rating erected as directed for

320b For 25 Amps.DP 1.00 Each 1950.00 RS: One Thousand Nine Hundred Fifty

321 Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having 2.00 Each 2611.00 RS: Two Thousand Six Hundred

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 Eleven only

phase and neutral 415 V having characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component (mounted in Box) for following Max. rating erected

as directed .Suitable for operation on Three phase 440 Volt max. rating. For 40A FP

322 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant 16.00 Each 5868.00 RS: Five Thousand Eight Hundred

indian standards ammended upto date. Sixty Eight only

Supplying and fixing following way single phase MCB distrubution board of company fabricated

with sheet box with powder coated inside and outside after apply seven tank chemical process of

MS sheet cover complete with suitable integral single piece construction tinned copper busbar

and link with all necessary interconnection and with necessary size MS frame for mounting

MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 &

having D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned Copper/Brass

make neutral & Earthing link with isolation & Protecting Cover for 240 Volts on surface / recess

complete with loose wire box, terminal connectors for all incoming and outgoing circuits, with

suitable size FRLS PVC insulated copper conductor up to terminal blocks and internal connection,

tinned coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 16 Way MCBDB: Including

Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA

and breaking capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828

having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to

operate on 240 Volt A.C. power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos. & 25 Amp: 4 Nos.) Cat.-III

Item No. Description of Item Qty. Unit In Figure In Word Amount

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected

in line & level with spirit level and finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking on

box done with red colour radium sticker as per site requirement and instructions given by EIC on

site. Font / number size given by EIC on site as per requirement]

323 Providing ad erecting approved make Three phase Double Door Horizontal / Vertical type (as per 2.00 Each 3462.00 RS: Three Thousand Four Hundred

site requirement and EIC instruction) outgoing per phase outgoing type (PPI) metal clad D.B. as Sixty Two only

per relevant indian standards ammended upto date.

Supplying and fixing following way Three phase MCB distrubution board with company wire links

for internal connections having colour code and with suitable lugs and company fabricated with

sheet box with powder coated inside and outside after apply seven tank chemical process of MS

sheet cover complete with suitable integral single piece construction, tinned copper busbar and

link with all necessary interconnection and with necessary size MS frame (if required) for

mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-

1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned

Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for 440 Volts on

surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing

circuits, with suitable size FRLS PVC insulated copper conductor up to terminal blocks and

internal connection, tinned coppper bus bar, 4 nos. tinned copper neutral link, 4 nos. tinned

copper earth bar, din bar-4 nos., detachable gland plate, interconnections, powder painted

including earthing etc.

Three phase incoming and single phase outgoing. For Three phase 6 Way Double Door PPI

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting plaster) (Same

colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering /

marking on box done with red colour radium sticker as per site requirement and instructions given

by EIC on site. Font / number size given by EIC on site as per requirement]

Item No. Description of Item Qty. Unit In Figure In Word Amount

324 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface 1.00 Each 1664.00 RS: One Thousand Six Hundred Sixty

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC Four only

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase incoming and horizontal single phase

outgoing sheet steel double door (IP-43)

For Single phase incoming and horizontal single phase outgoing -(a) Double door-16 Way

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting plaster) (Same

colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering /

marking on box done with red colour radium sticker as per site requirement and instructions given

by EIC on site. Font / number size given by EIC on site as per requirement]

325 Supply, Installation, Testing & Commissioning of Three Phase, 440 V Surge Suppressor 2.00 Each 6319.00 RS: Six Thousand Three Hundred

protection Device (SPD) & 40 Amp TPN MCB (or As per SPD OEM guide line for the protection of Ninteen only

SPD which is erected such a way that it can be operated easily) SPD must be capable to protect

all electrical and electronics equipments if SPD blast or fuse then the panel builder must have

replace it soon during defect liability period.The Detail Specification of SPD are As per Attached

sheet with Annexture -A(E). (Hakel,ikra,OBBO make) (With Three year Gaurantee/warranty)

Item No. Description of Item Qty. Unit In Figure In Word Amount

326 Supplying and erecting Servo Controlled Voltage Stabilizer (SCVS) as per following requirement: 1.00 Each 319700.00 RS: Three lac Ninteen Thousand Seven

(1) Input Voltage Range - Three Phase 340 To 480 Volt AC. (2) Out put Volatge - Three Phase Hundred only

415 Volt AC (Line - Line) with Voltage Regulation of +/- 1%. (3) Frequency range - 47 Hz To

Hz. (4) Efficiency - More or equal to 98%. (5) Type of Stabilizer - Suitable for Balance &

Unbalance Load and Voltage including SPD (6) Controlled Type - Digital Micro Controller Based

Disply. (7) Rate Of Correction - Upto 100 Volt / Sec (Line - Line) (8) Servo Motor Drive - AC

Syncronous Stepper Motor - As per KVA Capacityy, Out put volatge and Voltage regulation

requirement. (9) Nil Wave form Distortion and Effect of Load POwer. (10) Responce Time -

milli second. (11) Protection requirements - Input low Cut off protection / Input High Cut Off

Protection / Output Low Cut Off protection / IOutput High (12) Fault Annuciation Panel LED

shows Input present, Input high Input low, Output Normal, Output High, Outpur low, Overload.

(13) Output On time delay - 10 seconds (14) Ambient Tempeature capacity - 0 - 45 RH upto 90 %.

(15) Enclosure Type - IP 20 (16) Type of Cooling - Air ,Output:Bypass switch with changeover

switch and Provied SPD & 4 year free replacement guarantee on Stamp paper.Loading and

unloading of above item shall be done by hydra and skill work force under supervision of electrical

engineer and guidelines given by manufacturer to avoid damage to the item. Picture of it to be

submitted in running bill / final bill.Size of door and Ele. room / Pump room shall be checked by

agency's engineer before giving order. If found any problem in size discuss with GSPHCL

engineer for rectification before giving order. (125 KVA) (Fuji Electric, Servomax Limited,

Krykard,protekG Make)

327 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 x 3 mm 4.00 Sq. Mtr. 2289.00 RS: Two Thousand Two Hundred

red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy meter (contractor Eighty Nine only

shall make approved drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP

switch -busbar etc. as per Actual space available in electrical room at site)

328 Providing and erecting metallic vitrified danger notice board as per language suggested by 5.00 Each 69.00 RS: Sixty Nine only

engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.

Item No. Description of Item Qty. Unit In Figure In Word Amount

329 SITC of ATS with controller for 250 Amp of ampere capacity in existing housing with internal 1.00 Each 98794.00 RS: Ninty Eight Thousand Seven

wiring and required accessories etc. The switch has automatic transfer switch consists of an Hundred Ninty Four only

intelligent controller and a modular load break switch which automatically transfers the load to the

emergency power source when it detects the normal power source under/over voltage, under/over

frequency, or phase loss. The switch has three operational positions (Source I, Center-off, Source

II). The switch has technical specification as mentioned:

1. Rated insulation voltage:800 V

2.Rated impulse withstand volate: 8KV

3.Rated frequency:50/60HZ

4. Operational Volatge: 415 V

5.auxilary contact: 4 max

(socomec, schneider make or EIC)

330 Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel 1.00 Each 141527.00 RS: One lac Forty One Thousand Five

Cubical Panel fabrication should be type tested as per IEC 61921, 61439:1&2 Capacitor Duty Hundred Twenty Seven only

Contactor for switching as per following Steps Incomer Switch of MCCB type Icu=Ics=50KA at

400/440 Volts, with Microprocessor based OC, SC, internal earth fault protection Incomer Switch

of MCCB type Icu=Ics=50KA at 400/440 Volts, with Microprocessor based OC, SC, internal earth

fault protection,Copper tinned insulated Busbar,Cubical panel should be indoor type with IP

and IK 10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De tuning Reactor for each

capacitor,Panel having Short Circuit and Overload protection,Each step Capacitor having suitable

MCCB with Sc, OL, internal earth fault relay,Each stage having Stage Contactor (Capacitor load

rating),PF regulator master controller having suitable steps with LCD display, Rs

Communication port, Indication LED Lamps for main incomer and ON-OFF for each capacitor

bank,MS Chanel for Floor mounting, Cable entry as per site situation,Cooling fans for panel. For

331 Supplying & erecting bank of all polypropylene condenser (APP type) with standard capacity of 20.00 KVAR 690.00 RS: Six Hundred Ninty only

2,3,5,7, 10,12.5 & 15 KVAR units of P.F. correction for operation on 3 phase 50 c/s, 400 /440V (+

/ - 10%) with externally discharging resistance, earthing terminal & built on angle iron of channel

iron frame work and provided with terminal cover box. Complete erected on provided iron bracket

or on floor duly tested by license.

332 Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure 50.00 kg 74.92 RS: Seventy Four and Paise Ninty

design Including proper size approved by EIC of M.S. angles, flats, bars, square pipe, channels, Two only

sections (Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and finishing duly

painted with Asian/Nerolac make premium quality oil paint and true care red oxide metal

primer,asian paint make with erection on site as per direction of engineer in charge with

necessary grouting cementing, plastering and finishing complete. All hole opening of square pipe

end must be closed with M.S plate welding. Payment will be done on KG as per Actual weight.

Item No. Description of Item Qty. Unit In Figure In Word Amount

333a Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride 100.00 Mtr. 275.00 RS: Two Hundred Seventy Five

rigid material with ignition free & flame proof confirming BS with necessary end caps Internal and only

external bend, flat bends, coupler, tee etc. All necessary accessories and measuring of following

sizes. For 75 mm x 50 mm trunking (MK / Legrand/OBO Make Only)

333b For 100 mm x 50 mm trunking (MK / Legrand/OBO Make Only) 80.00 Mtr. 424.00 RS: Four Hundred Twenty Four

334a Supplying and erecting approved make GRP Perforated type Cable Tray with required GRP 100.00 Rmt 526.00 RS: Five Hundred Twenty Six

Straight Coupler Plates , Corner etc. Material – Corrosion Resistant Polyester Flame Retardant only

U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System,

Glass Content : 55 – 60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection

L/200 - Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix

K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993 Oxygen Index –

Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard

ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural

Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength –

Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per

Standard ASTM D 695- Barcol Hardness – 50 – 65. For Width - 300mm, Pultruded “C” Channel

with 50mm Sides 4mm Thickness, Loading 30 Kg./Mtr. ( Sumip,coromandak,Eircon,satyam-

composite Make or equivalent make app by engineer in charge subject to above specification)

334b For Width - 150 mm, Pultruded “C” Channel with 30mm Sides 3 mm Thickness, Loading 15 100.00 Rmt 230.00 RS: Two Hundred Thirty only

335 Providing and fixing approved make Ladder type cable tray. Made from M.S sheet. The cable tray 50.00 Rmt 306.00 RS: Three Hundred Six only

should be bended as per IS 2062/1079 shall be fabricated of double bended channel section

longitudinal members with single bended Channel section. Rungs of members welded to the base

of the longitudinal members at 250 mm c/c spacing . as per IS and shall be coated with hot dip

galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt

and washers etc. erected on existing support as per Specification and as per instruction of

engineer in charge. For 300 X 50 X 2.0 mm Thick

Item No. Description of Item Qty. Unit In Figure In Word Amount

336 Supplying and erecting approved make FRP/GRP Ladder type Cable Tray Material – Corrosion 50.00 Rmt 636.00 RS: Six Hundred Thirty Six only

Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from

Pultruded Sections - Polyester Resin System, Glass Content : 55 – 60 % - Thickness- Rung Sq.

Hollow Tube 25mm x 25mm - Fixing of Rung to Side Rail with Thermoplastic Pin & Epoxy

Adhesive, Assembly Single Stroke 3 Mtr. Length- Rung Spacing – 300mm - Length of Tray:

3000mm- Support Span – 2500mm, Deflection L/200 or < 10mm whichever is less - Specification

Followed NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very

Low Flammability - Oxygen Index – Minimum 30% as per ASTM D

Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Strength –

4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2

as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256-

Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness –

50 – 65 For Width 300 mm, Side Member “C” Section : 100 x 35 x 35mm with 4mm Thickness,

Loading 60Kg./Mtr. With Concentrated Load 70Kg. at center of the span

337 SITC of specified make X color for Cat.-6 Data and Y color for Cat.-6 voice cable to be done in 3000.00 Mtr. 47.00 RS: Forty Seven only

prelaid PVC pipe / raceway, but without the cost of raceway or pipe (the wire is to be drawn from

MFD/ JB to outlet point) (a) CAT - 6 (For Computer Cabling and For Voice Cabeling) (Molex,

Avaya, D-Link, Legrand make Only)

338 SITC of 24 x 10/100/1000BASE-T ports 3.00 Each 15247.00 RS: Fifteen Thousand Two Hundred

4 x Gigabit RJ45/SFP Combo ports Forty Seven only

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user interface

( Molex/Avaya/Systimax/Legrand make)

339 Supply, Installation, testing and commissioning of 24 port Cat 6 19" Toolless Patch Panel ( fully 3.00 Each 4357.00 RS: Four Thousand Three Hundred

loaded) enable all possible combinations of the various types of cable mounted on the same panel Fifty Seven only

by using various toolless connector blocks/modules. Have a metal structure enabling them to be

durably fixed to the uprights of the 19” chassis and assuring automatic grounding between toolless

RJ-45 connectors, the panel, and the 19” uprights of the enclosure. Include rear cable support

with plastic cable guides to hold cable without need for cable ties. Include quick mounting system

to mount the panel into the 19” rails without use of cage-nuts. These may be used to secure the

connections of wifi access points, IP cameras, servers, or other critical devices. Front Removal

IO's option for maintenance and trouble shooting with 6 Different Colours Labels for Labelling &

Identification of Individual Ports. & as per attached details specification. (CAT 6 )

Item No. Description of Item Qty. Unit In Figure In Word Amount

340a SITC of company fabricated Patch cords shall conform to Cat- 6 & conductor shall be stranded for 60.00 Each 199.00 RS: One Hundred Ninty Nine only

better flexibility Shall support network line speeds up to 1 Gbps Shall have RJ-45 jacks. For

Mtr. [Make and model approved by EIC as per specification]

340b SITC of company fabricated Patch cords shall conform to Cat- 6 & conductor shall be stranded for 60.00 Each 155.00 RS: One Hundred Fifty Five only

better flexibility Shall support network line speeds up to 1 Gbps Shall have RJ-45 jacks. For

Mtr.[Make and model approved by EIC as per specification]

341 Supply and installation of 9U steel rack for installing 4 nos. Ethernate switches/Hubs. The Rack 2.00 Each 11441.00 RS: Eleven Thousand Four Hundred

should be fully enclosed steel housing fabricated with 14 SWG sheet and powder coated with Forty One only

glass doors and having wire management systems. The rate includes the Exhaust Fan, 2 nos.

socket and 1 switch power strip and all the wiring in the rack. (Rittal, Valrack, APC, Legrand Make

and model approved by EIC as per specification)

342 Supply and installation of 15 U Equipment steel rack Wall mounting for installing , lan switch, 2.00 Each 19069.00 RS: Ninteen Thousand Sixty Nine

Patch panel, etc, rack should be fully enclosed steel housing fabricating with 14 SWG Sheet and only

powder coated with glass doors and having wire nos. wire management system . the rate includes

the exhaust fan 2 nos, 6 Sockets and 1 switch power strip and all the wiring in the rack.& as per

attached details specification.600mmX600mm ( Make:- APW president/ APC/

Valrack/Rittal/Netrack)

343a Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE 50.00 Mtr 463.00 RS: Four Hundred Sixty Three

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or only

HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary connections. For Conductor Size

mm armoured Fifty Pairs.[make and model approved by EIC strictly as per tender specification]

343b For Conductor Size 0.5 mm armoured Twenty Pairs.[make and model approved by EIC strictly as 50.00 Mtr 198.00 RS: One Hundred Ninty Eight

per tender specification] only

344a Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT 1.00 Each 1355.00 RS: One Thousand Three Hundred

standard approved with krone strips For Suitable for 20 pair (Krone type) Fifty Five only

344b For Suitable for 50 pair (Krone type) 1.00 Each 1730.00 RS: One Thousand Seven Hundred

Item No. Description of Item Qty. Unit In Figure In Word Amount

345 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole 3.00 Each 8222.00 RS: Eight Thousand Two Hundred

should be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, Twenty Two only

suitable suspend local wind speed with integral Junction box with Hot Deep Galvanised door

having 2 nos. 180° operated hinges & 2 nos. Ln key locking with silicon rubber gasket. Consist of

terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail & MCB , Brass

stud type terminal and arrangement for cable termination to be erected on RCC foundation as per

details given by manufacturer and EIC considering site requirement.

Foundation Details: 1) Grade of RCC 1:2:4, 2) Grade of steel rainforcement of RCC FE 415, 3)

Clear cover to rainforcement 50mm, 4)Concrete vibrated, 5) use suttering / farma, 6)Hot deep

galvanized average 70Micron, 7) Detail drawing will be given by corporation. For 6 Mtr. Long

mm Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M20

Bolts and 600mm long hot deep galvanized J-Bolt, nuts, washers with 1000mm under ground and

200mm above ground level and 450mm dia. Foundation in 1:2:4 proportion.(As Per Details given

by Manufacturer & EIC Considering Site Requirement.Approx.Pole Weight 59kg.) (Make:- Bajaj,

Walmart, Ambica, Transril)

346a Supplying & erecting Sintex or approved make SMC press moulded composite FRP. loop-in, 2.00 Each 890.00 RS: Eight Hundred Ninty only

loop-out approx. 2mm thick box complete with bakelite connector strip 4way & hinged doors

having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection

on pole with cable clamps& earth bolt of following size of box. For 300mm x 200mm x 100mm

346b For 140mm x 140mm x 100mm [deep] 2.00 Each 295.00 RS: Two Hundred Ninty Five only

346c For 250mm x 200mm x 100mm [deep] 2.00 Each 510.00 RS: Five Hundred Ten only

347 Supplying and erecting Coil type earthing, coil made from 8 SWG galvanised iron wire with 50 mm 3.00 Each 369.00 RS: Three Hundred Sixty Nine

OD and 50 turns (length of turns approx. 200 mm) and having additional continuous streight only

length of 3.00 mtr at open end and should be connected to earthing bolt and burried in 1.5 mtr

deep specially prepared earth pit complete with salt and charcoal/coke as required for coil type

earthing. (Approx weight of coil 1.0 to 1.1 Kgs)

Item No. Description of Item Qty. Unit In Figure In Word Amount

348 Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG M.S. 10.00 Each 702.00 RS: Seven Hundred Two only

sheet having following size complete with fixing arrangement for terminal board, with necessary

hole for wire entry and exit from the box. The box shall be provided with cover and hinges on one

side and bolting at other end The box shall be fixed by clamps fabricated from 25mm x 6mm

flat.The box shall be painted with one coat of red oxide and two coats of paint having following box

size 330 mm x 260 mm x 140 mm (depth). And Providing and fixing Terminal board of size 5.0 x

127 x 152.4 mm. bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass

studs with nuts, washers and clamps of size 25 mm x 3 mm suitable for pole painted with one coat

of red lead paint.

349 For Wall & Terrace Street light Bracket:Providing and Fixing of wall and terrace bracket 8.00 Each 487.00 RS: Four Hundred Eighty Seven

consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter and length suitable for building only

face for fixing the brackets and having spread of Upto 0.50 mtr. length with suitable degree angle

as per site situation suggested by EIC. vertical plane and suitable welded stiffner reducer and

nipple with check nut complete painted with one coat of red oxide and two coats of alluminium

paint (Zinc Coating before alluminium Paint is mandatory)with . complete with 150*150*2mm thick

G.I plate with 4no heavy duty galvanized jasti khila of required size or Single arm bracket (pipe in

pipe type) suitable for terrace as per design given by EIC Considering parfait, height ,width and

total height of building and type of led fitting .

For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Ambica /

Fab / Bajaj / Impression equipment Only) (Test certificate to be submitted)

350a For Street light Pole Bracket:Supplying and erecting street light pole bracket bracket consisting of 3.00 Each 487.00 RS: Four Hundred Eighty Seven

ISI mark "B" class G.I. Pipe 4.2 cm outside diameter complete with suitable B class G.I. Sleeve only

tubing of 2 mm. thick and required size and approx. 45 Cms length suitable for 76.5 / 80 mm.

required size of pole top having nuts and bolts for fixing the brackets and having spread of Upto

0.50 mtr. length with 110 deg. with vertical plane and suitable welded stiffner reducer and nipple

with check nut complete painted with one coat of red oxide and two coats of alluminium

paint.(Zinc Coating before alluminium Paint is mandatory) For single arm bracket. (Jindal / Asian /

Tata / Surya Prakash make Only) (Fabricators:- Ambica / Fab / Bajaj / Impression equipment

Only) (Test certificate to be submitted).

350b For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, 1.00 Each 616.00 RS: Six Hundred Sixteen only

Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted)

Item No. Description of Item Qty. Unit In Figure In Word Amount

351 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of Max. 5.00 Each 3512.00 RS: Three Thousand Five Hundred

45 W with single piece die cast aluminium housing, high power LED shall be mounted on high Twelve only

quality metal core PCB with extremely precison designed heat sink complete with IP66 protection

Class with polycarbonate / thoughened glass cover the fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with LED module min.

lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality polycarbonate lenses

for better light distribution. The watt capacity of Each LED must be >=4W in street light fitting. The

Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high quality

driver for protection against high and low Voltage cut Off, opertional for high amibient and high

humid envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range Voltage 160 to 270 V, system

efficiency >= 110 lm/w, and total lumens not less then 4950, CCT > 5000K, CRI > 65, beam angle

120 deg, surge immunity level at least 4 KV integral and 10 KV non integral (Note:- The

manufacturer / authorized Channel partner of the manufacturer has to submit 5yrs free replcement

Guarantee for complete Fixture)

352 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of Max. 2.00 Each 6117.00 RS: Six Thousand One Hundred

90W with single piece die cast aluminium housing, high power LED shall be mounted on high Seventeen only

quality metal core PCB with extremely precison designed heat sink complete with IP66 protection

Class with polycarbonate / thoughened glass cover the fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with LED module min.

lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality polycarbonate lenses

for better light distribution. The watt capacity of Each LED must be >=4W in street light fitting.

The Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high

quality driver for protection against high and low Voltage cut Off, opertional for high amibient and

high humid envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range Voltage 160 to 270 V, system

efficiency >= 110 lm/w, and total lumens not less then 9900, CCT > 5000K, CRI > 65, beam angle

120 deg, surge immunity level at least 4 KV integral and 10 KV non integral (Note:- The

manufacturer / authorized Channel partner of the manufacturer has to submit 5yrs free replcement

Guarantee for complete Fixture)

Item No. Description of Item Qty. Unit In Figure In Word Amount

353 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of Max. 4.00 Each 6701.00 RS: Six Thousand Seven Hundred One

120 W with single piece die cast aluminium housing, high power LED shall be mounted on high only

quality metal core PCB with extremely precison designed heat sink, complete with IP66

protection Class, with polycarbonate / toughened glass cover. The fixture should be suitable for

pole/bracket mounting. The fixture to comply both LM79 and LM 80 guidelines with LED minimum

130 lumen/watt with toughen glass, L70 at 50,000 hrs, provided with high quality polycarbonate

lenses for better light distribution. The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for protection against high and low Voltage cut

Off, opertional for high amibient and high humid envirnoments, THD of driver should be less than

10% and P.F > 0.95. Also the Fixture should meet the following technical criterias Oprating range

Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total lumens not less then 13200, CCT

> 5000K, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV Integral & 10 KV Non

Integral. The Separate Potted driver should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is removed. In addition to the above

product should be operational in the temperature range of 0 deg to 50 deg and humidity range of

10% to 90% RH. (Note:- The manufacturer/authorized Channel partner of the manufacturer has

to submit 5 yrs free replcement Guarantee for complete Fixture)

354 SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption of 8.00 Each 7395.00 RS: Seven Thousand Three Hundred

maximum 120 W with single piece die cast aluminium housing, LED's mounted on high quality Ninty Five only

metal core based PCB with extremely precison designed heat sink, complete with IP66 protection

Class, with polycarbonate / Toughened glass cover. The fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with LED minimum

lumen/watt with L70 at 50,000 hrs, provided with high quality polycarbonate Seperate lenses for

better light distribution.The watt capacity of Each LED must be >=4W in street light fitting. The

Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high quality

potted driver for protection against, high and low Voltage cut Off, opertional for high amibient and

high humid envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias. Operating range Voltage 160 to 270 V, system

efficiency > 110 lm/w, CCT > 5000K, CRI >65, beam angle 120 deg, 4kV integral & non integral

surge immunity level at least 10 KV non integral... Flood Light lumens shall be more than

(Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 5yrs

free replcement Guarantee for complete Fixture)

Item No. Description of Item Qty. Unit In Figure In Word Amount

355 SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption of 2.00 Each 6228.00 RS: Six Thousand Two Hundred

maximum 90 W with single piece die cast aluminium housing, LED's mounted on high quality Twenty Eight only

metal core based PCB with extremely precison designed heat sink, complete with IP66 protection

Class, with polycarbonate / Toughened glass cover. The fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with LED minimum

lumen/watt with L70 at 50,000 hrs, provided with high quality polycarbonate Seperate lenses for

better light distribution. The watt capacity of Each LED must be >=4W in street light fitting. The

Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high quality

potted driver for protection against, high and low Voltage cut Off, opertional for high amibient and

high humid envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias. Operating range Voltage 160 to 270 V, system

efficiency > 110 lm/w, CCT > 5000K, CRI >65, beam angle 120 deg, 4kV integral & non integral

surge immunity level at least 10 KV non integral... Flood Light lumens shall be more than

(Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 5yrs

free replcement Guarantee for complete Fixture)

356 Providing , erecting , testing and commissioning Insu Intelligent Streetlight Controller specially 1.00 Each 20255.00 RS: Twenty Thousand Two Hundred

design for energy saving in conventional streetlight system ( Cat. No. SLC-03-1Ph-7.5KVA- Fifty Five only

20Amp/Cat NoSLC-03-1 ph-15 KVA 20 amp per phase) having technial specification ,1 phase

wire, 230 V AC/ph +/- 25% R Y B N 2 Wire supply System.50 Hz (+ / - 10 %), 2 W (Stand By) to

W (at street light operation)consuption, Advance 8 bit micro controller, switching on longitude and

latitude base, accaracy of +- 1 minute per month. with inbuilt battery, with battery life of more than

8 years, with speicial device which hold the parameter for more then 10 years without any power

and password protected. 16 character and two line LCD display with backlight, 4 keys user

friendly keyboard system, 7500 VA feeder pillar capacity, 63/100 amps isolator ,3 Outpus with

termination 40/63 Amps 2/3 pole contactor , 3X16 Amps with F R cable provision to by pass by

way of relay operation through auto/manual switch, 2 to 55 centigrade and humidity 90 % non

condensing Outdoor type installation on pole with clamps.(Provided with clamps and nut bolt) or

wall or floor, three locking system flush type internal panel lock, external pad lock and internal U

clamp locking systems for against theft of panel. having 17/25 Kg weight ,16/18 guage MS

weather proof with industrial exterior powder coated with 7 tank process RAL

357a Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium conductor cable for 450.00 mtr 724.00 RS: Seven Hundred Twenty Four

1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage only

1.0mm thick cable clamp or in existing DWC pipe underground or road crossing or floor. For

1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Item No. Description of Item Qty. Unit In Figure In Word Amount

357b For 3*1/2 core 95 Sq. mm (25 Sq. mm * 1/2 core) 430.00 Mtr. 486.00 RS: Four Hundred Eighty Six only

357c For 3*1/2 core 70 Sq. mm (35 Sq. mm * 1/2 core) 420.00 Mtr. 375.00 RS: Three Hundred Seventy Five

357d For 4 core x 25 Sq. mm 300.00 Mtr. 189.00 RS: One Hundred Eighty Nine

358 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for 1100 volt to 525.00 Mtr. 361.00 RS: Three Hundred Sixty One

be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage 1.6mm thick only

cable clamp or in existing DWC pipe underground or road crossing or floor. For 4 core x

359 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked unarmoured Copper cable for 1100 volt to 280.00 Mtr 568.00 RS: Five Hundred Sixty Eight only

be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage 1.0mm thick

cable clamp or in existing DWC pipe underground or road crossing or floor. For 4 core x

360a Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed 200.00 Mtr. 56.00 RS: Fifty Six only

copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper lugs, nuts and bolts if required. For One wire

6.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 )

360b For One wire 10.00 sq. mm (Conductor resistance should be as per IS:8130/1984 ) 50.00 Mtr. 91.00 RS: Ninty One only

360c For One wire 16.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 ) 600.00 Mtr. 141.00 RS: One Hundred Forty One only

360d For One Wire 25.00 Sq.mm(Conductor resistance should be as per IS:8130/1984 ) 50.00 Mtr. 234.00 RS: Two Hundred Thirty Four

360e For One Wire 35.00 Sq.mm(Conductor resistance should be as per IS:8130/1984 ) 50.00 Mtr. 298.00 RS: Two Hundred Ninty Eight

360f For One wire 70.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 )) 132.00 Mtr. 663.00 RS: Six Hundred Sixty Three only

360g For One wire 95.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 )) 200.00 mtr 910.00 RS: Nine Hundred Ten only

361a Providing & fixing Solderless crimping type Aluminium lugs conforming to IS suitable for cable of 24.00 Each 15.00 RS: Fifteen only

following size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. For 25 Sq.mm.

361b For 35/50 Sq.mm 32.00 Each 20.00 RS: Twenty only

361c For 95 Sq mm 24.00 Each 40.00 RS: Forty only

361d For 150 Sq.mm 30.00 Each 61.00 RS: Sixty One only

362a Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable of 150.00 Each 8.00 RS: Eight only

following size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. For 1.5/2.5 to 6 Sq.mm

Item No. Description of Item Qty. Unit In Figure In Word Amount

362b For 10 Sq.mm 100.00 Each 10.00 RS: Ten only

362c For 16 Sq.mm. 100.00 Each 12.00 RS: Twelve only

362d For 25 Sq.mm. 80.00 Each 15.00 RS: Fifteen only

362e For 35/50 Sq.mm. 80.00 Each 22.00 RS: Twenty Two only

362f For 70 Sq.mm. 40.00 Each 27.00 RS: Twenty Seven only

362g For 95 Sq.mm. 20.00 Each 47.00 RS: Forty Seven only

363a Providing & fixing double compressed heavy duty flange type brass cable gland with rubber ring 25.00 Each 43.00 RS: Forty Three only

for P V C insulated armoured cable complete with outgoing tails, insulating tape etc. For following

size cables. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet Make Only)

363b For 3*1/2 core x 25.0 Sq. mm (Sigma, MCI, Comet Make Only) 35.00 Each 66.00 RS: Sixty Six only

363c For 2 to 4 core x 70.0 Sq. mm (Sigma, MCI, Comet Make Only) 15.00 Each 102.00 RS: One Hundred Two only

363d For 2 to 4 core x 95.0 Sq. mm (Sigma, MCI, Comet Make Only) 12.00 Each 130.00 RS: One Hundred Thirty only

363e For 3*1/2 core x 150.0 Sq. mm (Sigma, MCI, Comet Make Only) 10.00 Each 189.00 RS: One Hundred Eighty Nine

363f For 2 to 4 core x 10.0 Sq. mm (Sigma, MCI, Comet Make Only) 10.00 Each 48.00 RS: Forty Eight only

364 Providing & fixing PVC cable gland with rubber ring for P V C insulated unarmoured cable 6.00 Each 25.00 RS: Twenty Five only

complete with outgoing tails, insulating tape etc. For following size cables. For 2 to 4 core x 6.0 to

365 Supplying following size of Light duty “A” Class G.I. Pipe & erecting as directed by Engineer-in- 20.00 Mtr. 171.00 RS: One Hundred Seventy One

charge. For 25 mm dia. only

366 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper 50.00 Mtr. 77.00 RS: Seventy Seven only

wires of following size to be erected as directed. For 3 core 2.5 sq.mm. PVC insulated round

copper wire ISI mark.

367 For 3 core 1.5 sq.mm. PVC insulated round copper wire ISI mark. 100.00 Mtr. 46.00 RS: Forty Six only

368 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. below ground across the road 10.00 Mtr. 261.00 RS: Two Hundred Sixty One only

crossing or on floor with necessary material in an approved manner and making the ground as per

original. For 150mm Dia

369a Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 150.00 Mtr. 117.00 RS: One Hundred Seventeen

24) 2018)) with minimum load required of 450N capacity with anti rodent and ultra violet material only

properties with necessary connecting accessories of same material at required depth to be laid

90 cms. under ground for laying of cable below ground / road surface for enclosing cable and

back filling the same to make ground as per original. (A)For Outer dia.50mm and Inner dia. 38mm

(Test Certificate to be Submitted)

369b For Outer dia.90mm and Inner dia. 75mm(Test Certificate to be Submitted) 100.00 Mtr. 150.00 RS: One Hundred Fifty only

369c For Outer dia.120mm and Inner dia. 103.50mm (Test Certificate to be Submitted) 80.00 Mtr. 191.00 RS: One Hundred Ninty One only

Item No. Description of Item Qty. Unit In Figure In Word Amount

370 Providing and erecting open well type horizontal submersible mono block pump set with cast iron 2.00 Each 15552.00 RS: Fifteen Thousand Five Hundred

body having following specification For 3 phase open well horizontal mono block pump set Fifty Two only

suitable for 270 LPM discharge at required head as per plumbing length and vertical & Horizontal

head.Agency has to submit the details calculation of head to GSPHCL and get approval of make

and model of pump having tender specification with TDS & GA drawing. Suitable for 50/65 mm dia

delivery pipe with 10 mtr. necessary Size 3 Core Flat copper flexible cable. (Body: Cast iron /

Winding : Copper / stator : Copper / rotor : Copper / shaft : SS 304 material test certificate from

manufacture shall be submitted).The model of the pump with respect to head and discharge will

be approved by EIC. Pump should have following specifications:(1) Minimum 10 mtr. Cu. flat

cable of suitable size must be provided with pump.(2) Pump shall be installed as per manufacturer

foundation/erection drawing or as per IS specification. (Body full C.I., stator winding- copper, rotor-

copper, shaft- SS 304, motor-Energy efficiency)

371 Supplying and erecting approved make 3 HP DOL type motor control cubical panel made from 16 1.00 Each 47062.00 RS: Forty Seven Thousand Sixty Two

G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors and locking only

arrangement Floor Mounting On 300 mm Height with MS Stand Angle & CC Foundation. Size

mm (H) x 35 mm (W) x 05 mm (D). The detail specification & quantity of material used are as

Panel must be with minilec relay for auotmatic change over for pump 1 & 2 logically without using

manually change over switch (Minimum Panel Size: 1.10 meter (H) x 1.10 meter (W) x 0.25 meter

INCOMMER SECTION: (1) MCCB-30 KA-FP (Ics = 100% Icu), Rating: 63 Amp., Make: L&T, Qty:

01 No. (2) Digital Ammeter (SR-65), Rating: 0-60 Amp., Make: Meco, Qty: 01 No. (3) Ammeter

Selector Switch, Rating: 6 Amp., Rotary, Make: Salzer, Qty: 01 No. (4) Digital Voltmeter (SR-65),

Rating: 0-500 V, Make: Meco, Qty: 01 No. (5) Volt Selector Switch, Rating: 6 Amp., Rotary, Make:

Salzer, Qty: 01 No. (6) C.T.- Current Transformer, Rating: 60/5 Amp., Make: Virat, Qty: 03 Nos.

(7) Indicating Lamps (R,Y,B), Rating: 22.5 mm LED, Make: Airon, Qty:03 Nos. (8) SP MCB

Rating: 20 Amp., Make: L&T , Qty: 03 Nos. (9) Control Wiring, Rating: 1.0 Sq.mm, Make: Any ISI,

Qty: Lot (10) Copper Busbar, Rating: 63A/100 Amp., Qty: Lot (11) Numeric logical relay, Qty:

Item No. Description of Item Qty. Unit In Figure In Word Amount

Outgoing Feeder (3 HP DOL Feeder): Qty: 02 Nos. (1) MCB-FP-10 KA, Rating: 20 Amp., Make:

L&T, Qty: 02 Nos. (2) Power Contactor (415 V) Main, Rating: 12 Amp., Make: L&T, Qty: 02 Nos.

(3) Over Load Relay, Rating: 6-10 Amp., Make: L&T, Qty: 02 Nos. (4) Digital Ameter (SR-65),

Rating: 0-20 Amp., Make: Meco, Qty: 02 Nos., (5) Digital Voltmeter (SR-65), Rating: 0-500 V,

Make: Meco, Qty: 02 Nos. (6) Indicating Lamps (Start,Run,Trip), Rating: 22.5 mm LED, Make:

Airon, Qty: 04 Nos. (7) Push Button (Start,Stop), Rating: 22.5 mm, Make: Airon, Qty: 02 Nos. (8)

SPP, Rating: 415 V, Make: Space, Qty: 02 Nos. (9) Terminal, Rating: As per Amp., Make: Airon,

Qty: 04 Nos. (10) Control Wiring, Rating: 1.0 Sq.mm., Make: Any ISI, Qty: Lot (11) Power Wiring,

Rating: As Per Amp., Make: Any ISI, Qty: Lot

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-FP-10 KA, Rating: 6 Amp., Make: L&T,

Qty: 01 No. (2) Capacitor- MPP Type, Rating: 2 KVAr, Make: Concap, Qty: 01 No., (3) Power

wiring, Rating: As Per Amp., Make: Any ISI, Qty:Lot

Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1) MCB-FP-10 KA, Rating: 32 Amp., Make:

L&T, Qty: 01 No. (2) Power wiring, Rating: As Per Amp. (3) Earthing Strip: 25 x 3; G.I. Strip, Qty:

01 No. (4) MCB-DP-10KA , Rating: 20A, Make: L&T, Qty.:01 Nos.

372 Lowering of existing submercible motor pump set complete with required No. and size of pipes by 2.00 Each 848.00 RS: Eight Hundred Forty Eight

means of proper chain pulley block and pipe wrenches. Job includes stacking of pipes only

cronologically after the checking of threads. For open well horizontal submercible pump set for

sump well. For 1.00 HP to 5.00 HP

373a Supplying & erecting ISI Marked (Embossed) following size of “B” Class G.I . Pipe & erecting as 10.00 Mtr. 129.00 RS: One Hundred Twenty Nine

directed by Engineer-in-charge with necessary plumbing as desired. For 25 mm dia only

373b For 50mm Dia 30.00 Mtr. 260.00 RS: Two Hundred Sixty only

374 Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI marked with packing, 3.00 Each 1010.00 RS: One Thousand Ten only

flange, nuts and bolts etc.suitable for following pipe size. For 50 mm dia. (SANT , KIRLOSKAR

LEADER , ZOLOTO)

375 Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect suitable kitkat fuse / MCB to be 1.00 Each 232.00 RS: Two Hundred Thirty Two only

. erected on polished wooden board inside the box with hinged/sliding door with rubber rings and

erected on pole with suitable pole clamp, all duly painted with one coat of red oxide and two coats

376 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper 20.00 Mtr. 103.00 RS: One Hundred Three only

cable approved make of following Size. For 3 Core x 2.5 Sq. mm

377 Providing water proof straight joint in PVC insulated flat flexible copper cable by using insulated 2.00 Each 188.00 RS: One Hundred Eighty Eight

material water proofing material and making the joint complete. UP to 10 Sq.mm only

Item No. Description of Item Qty. Unit In Figure In Word Amount

378 Providing and erecting Inverter based approved make Cassette type split air-conditioning unit 6.00 Each 79932.00 RS: Seventy Nine Thousand Nine

consisting of condensing unit with fan motor, hermetically sealed scroll/rotary compressor with Hundred Thirty Two only

accessories etc. duly connected separately erected evaporating unit and blower motor with its

accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star

and above of current year) with necessary core cutting.(d) for 2 ton capacity- ( Make:-

OGENERAL, MITSUBISHI,BLUESTAR, DAIKIN ) ( Model approved by EIC)

379 Providing and erecting Inverter based approved make Cassette type split air-conditioning unit 4.00 Each 68682.00 RS: Sixty Eight Thousand Six Hundred

consisting of condensing unit with fan motor, hermetically sealed scroll/rotary compressor with Eighty Two only

accessories etc. duly connected separately erected evaporating unit and blower motor with its

accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star

and above of current year) with necessary core cutting.(d) for 1.5 ton capacity- ( Make:-

OGENERAL, MITSUBISHI,BLUESTAR, DAIKIN ) ( Model approved by EIC)

380 SITC of Air condationer copper tubing with minimum 19mm thick class O nitrile rubber insulation 300.00 Rmt 956.00 RS: Nine Hundred Fifty Six only

for entire piping system. Exposed refrigerant piping should be additionally insulated with factory

laminatede 200GSM glass cloth for UV and mechnical protection and manufacturer recommended

adhesive ( Solvent-free) sealant appiled at all joints Uv- Protection layer. additional layer of UV

paint over GC for all exposed to atmosphere piping for weather protection of pipes & insulation

and prevention of rain water ingress. For Single phase/ Three Phase Split A.C. Machine/

Cassate A.C Machine insulated pair of soft, copper tubing including power and control cable,

20/25/32 mm Dia. Rigid (ISI marked) UPVC drain pipe. Duly Insulated with 6 mm elastomeric

nitrite rubber up for Split AC machine up to 2 TR capacity

Item No. Description of Item Qty. Unit In Figure In Word Amount

381 Executing comprehensive (All-in-All) service & maintenance with spare parts as per terms & 6.00 Each 8784.00 RS: Eight Thousand Seven Hundred

condition of tender for 2 Dry Service & 2 water or Chemical service with AC agency for defect Eighty Four only

liability period and copy of this contract will be submitted before final bill. Agency has to quote rate

accordingly. Agency has to also provide the fitness certificate from system agency and submit to

G.S.P.H.C.L. Agency has to Compulsory submit FDR of approved bank as per clause 2.0, section

3 of FDR of Rs.52,704.00+ GST or quoted rate (as per tender premium % above) whichever is

higher to G.S.P.H.C.L. for minimum maturity period of five years in favour of G.S.P.H.C.L., Which

will be released after successful completion of A.M.C. & at the completion of defect liability period.

In any case without submitting FDR final bill submission will not be done.AC agency has to

maintain written record of service & maintenance during defect liability daily period duly sign by

police dept. and submitted regularly to G.S.P.H.C.L. Agency has to give minimum three services

and demonstration per year and testing and training of entire Air Conditioning system. during

defect liability period and obtain necessary certificate from police department and submitted to

G.S.P.H.C.L. Agency has to do maintenance as per terms & condition alternative in tender.

(Agency will have to submit stability and performance certificate regarding AC system from

authorized dealer/OEM of AC at the time of final SD release). For delay in rectifing the fault

penalty will be deducted from agency S.D. For 2.0 Ton Inverter based approved make

Cassette type split air-conditioning.

Item No. Description of Item Qty. Unit In Figure In Word Amount

382 Executing comprehensive (All-in-All) service & maintenance with spare parts as per terms & 4.00 Each 7432.00 RS: Seven Thousand Four Hundred

condition of tender for 2 Dry Service & 2 water or Chemical service with AC agency for defect Thirty Two only

liability period and copy of this contract will be submitted before final bill. Agency has to quote rate

accordingly. Agency has to also provide the fitness certificate from system agency and submit to

G.S.P.H.C.L. Agency has to Compulsory submit FDR of approved bank as per clause 2.0, section

3 of FDR of Rs.29,728.00+ GST or quoted rate (as per tender premium % above) whichever is

higher to G.S.P.H.C.L. for minimum maturity period of five years in favour of G.S.P.H.C.L., Which

will be released after successful completion of A.M.C. & at the completion of defect liability period.

In any case without submitting FDR final bill submission will not be done.AC agency has to

maintain written record of service & maintenance during defect liability daily period duly sign by

police dept. and submitted regularly to G.S.P.H.C.L. Agency has to give minimum three services

and demonstration per year and testing and training of entire Air Conditioning system. during

defect liability period and obtain necessary certificate from police department and submitted to

G.S.P.H.C.L. Agency has to do maintenance as per terms & condition alternative in tender.

(Agency will have to submit stability and performance certificate regarding AC system from

authorized dealer/OEM of AC at the time of final SD release). For delay in rectifing the fault

penalty will be deducted from agency S.D. For 1.5 Ton Inverter based approved make

Cassette type split air-conditioning.

383 SITC of UPVC drain pipe of 10 Kg/cm2 rating with 9 mm thick nitrile rubber insulation. & 250.00 Rmt 87.00 RS: Eighty Seven only

necessary support & concealed work in wall for 25mm dia. UPVC drain piping (with 8 mm Nitrile

rubber Class O Insulation) from each HAT/DSAC/OA/WM Split/Cassette units to drain

384 carry out RCC Core cutting- up to 100 mm dia./300mm thick Wall/beam/slab with providing PVC 20.00 Job 1534.00 RS: One Thousand Five Hundred

pipe of 3 mm thick inside and necessary finishing on both ends of wall . Thirty Four only

Item No. Description of Item Qty. Unit In Figure In Word Amount

385 Supplying, Erecting, Testing & Commissioning the 10 passenger( Basement+Parking+ 4 upper 1.00 Each 1341271.00 RS: Thirteen lac Forty One Thousand

Floor) lift having following main features[1] GEAR LESS LIFT DRIVE comprising of High Starting Two Hundred Seventy One only

torque Lift duty 3 phase 440 V A. C. Permanent magnetic synchronous motor of proper rating with

high efficiency shall be used.( MACHINE ROOM LESS/ MACHINE ROOM)

[2] Micro processor based / PLC, ACVVF, vector control drive with encoder feedback closed loop

system shall be used for lift car and door operation which shall be full collective selective

operation shall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with

overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin +

passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade

304 (Jindal, Tata, Sail, AM/NS(Essar) make only) duty. Car ceiling will be S.S. finishes with

aesthetic appearance with LED ceiling lights. Car flooring shall be Good quality higher strength

aliminium chequred plate/ granite/ pvc flooring( as per site requirement and instructed by EIC.

Car doors shall be of stainless steel grade 304 (Jindal, Tata, Sail, AM/NS(Essar) make only),

hairline finish with centre opening / telescopic automatic doors. Car panel will also be S.S.

(Jindal, Tata, Sail, AM/NS(Essar) make only) finished with emergency stop device, mechanical

door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches

must be with brail language as per lift act.

[4] All landing doors must be fire rated for min. 2 hours and shall be fully automatic centre

opening/ telescopic opening made of hairline finish steel grade of 304 (Jindal, Tata, Sail, AM/NS

(Essar) make only) with key holes and infrared curtains with Unlocking facility from outside.

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be

provided. Also emergency Light & Fan should start immediately without any time delay as soon as

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be

provided inside the car and at all floors.

[7] Full height infra red curtain with multiple criss / crossing light beams shall be provided.

Item No. Description of Item Qty. Unit In Figure In Word Amount

[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with

Manual Rescue Operation (Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided such that doors

kept open till excess load is removed.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan and lights with automatic sleep timer shall be provided.

[12] Voice annunciater with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in control

[14] Mechanical over speed governor with governor calibration as per actual site parameters and

submission of calibration certificate required, door key holes in the floor doors, fireman switch

shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit

should be provided by the lift agency, along with the other steel structure works, foundations for

the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as /

if directed by engineer in charge.

[17] Permanent wiring with necessary safety devices like RCCB / ELCB in all circuit, Over voltage

/ Under voltage protection and THD eliminator in circuit in lift machine room and lift well with

proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the

agency. Only 3 phase, 440 V Power supply of shall be made available by department in lift

machine room. Necessary Earthing as per Lift Act / Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to

erection of lift shall be made by lift agency without any extra cost.(granite/marble fixing around all

landing door openings are not in lift agency’s scope.)

[19]Intercom Suitable For Hook Up To EPBAX

[20] Agency Has To Provide All Working Drawing & Document & Liaison Service For Obtaining All

Necessary Permission From Lift Inspector & Other Authorities including erection permission and

lift license and its related fees.

Item No. Description of Item Qty. Unit In Figure In Word Amount

[21] Lift Agency has to provide Acrylic transparent License / Display A4 size holder in Lift car.

[22] As Per Statutory Requirement Of Govt. Of Gujarat Lift & Escalator Act 2000, Lift Agency Has

1. Car Top Safety Barried

2. Push & Talk Communication system

3. Fireman's Switch Operation at Ground Floor.

4. Carrying out third party Lift inspection during / after Lift erection and provide report by Third

party authorized by concern Licensing authority.

5. Agency has to provide Third party insurance upto completion of free maintenance period /

Defect liability period and submit the documents for the same to G.S.P.H.C.L.

[23]Including Providing Comprehensive Maintenance Service (Including Spare Parts)During

Defect Liablity Period Complete As Required & As Specified.All Civil Work Carried For Lift

Installation Should Be Done By Contractor .Contractor Shall Arrange All ApprovalForm all

Concern Department For Lift.

[24] Car panel operating buttons with floor position indicator / buttons must be of Auto Glow type

clearly visible when view from inside cabin.

[25] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of SS

304 should be provided at appropriate height on the rear and side wall panels in Lift Car.

[26] All Civil Work Carried For Lift Installation Should Be Done By Contractor. Contractor Shall

Arrange All Approval Form all Concern Department For Lift

[27] Required Capacity of Three Phase Voltage Stabilizer as per Lift OEM Requirement Having

Input voltage Range - 340 to 480 Volt AC and Output Voltage Range 415 Volt AC +-1% ( line -

Line ). Voltage stabilizer must be installed at Machine Room.

[28]In this tender agency has to maintain all lift including services and spare parts during defect

liability period as per item inluded in tender. One year free service & Maintenance shall be

provided by OEM. Detail Specification of lIft as per Annexure( Including Duplex system )

[29]lift outer door has male female provision for 2 hr fire rated door

Item No. Description of Item Qty. Unit In Figure In Word Amount

[30] Factory inspection for verification of quality,workmanship and as per drawing & testing before

dispatch the material as per tender condition.

[31] Inverter/UPS/Battery for ARD Unit to be covered with lock and Key Powder Coated Box and

fix it to be suitable height on Wall.

[32] GSPHCL will be provided conceptual drawing of Machine Room equipments & Wiring.As per

drawing Lift manufacturer should be consider Machine Room Size,Orientation and equipments

size and provide drawing of Cable Route and Equipment and get approval from GSPHCL

Engineer prior to start the work.

[33] Lift Panels shall be supplied with Seven Tank chemical process which shall be carried out

before applying painting, painted with powder coating & IP 55 protection and all lift Cables must

be erected in 16 SWG Raceway made from Galvanised.

[34] Advanced Control sysstem dual 32 bit embedded microprocessor with CANBUS serial

communication mode operation on site programming facility , anti nuisance, pre-opening, BMS/

RMS system supporting hardware & Software. False call Canceling/ Anti Nuisance,

[35] As per gujarat lift and escalator act 2001 and central electricity authority regulations

RCCB for lift cabin and lift machine must be installed in control panel by lift manufacturer.

Details specification of lift as per Annexure-A. For 10 passengers (Basement+Parking+ 4 upper

Floor ) with Rated Speed of 1.5 m/sec with micro processor /PLC control and ACVVVF.drive Cat-

386 Executing comprehensive (All-in-All) service & manitenance (Including replacement of battery For 1.00 Job 147540.00 RS: One lac Forty Seven Thousand Five

ARD) with spare parts as per terms & condition of tender lift manufacturer for defect liability Hundred Forty only

period.For that main agency has to give All-in-All comprehensive maintenance contract to lift

manufacturer and copy of this contract will be submitted before final bill. Agency has to quote rate

accordingly. Agency has to also provide the fitness certificate from lift manufacturer and submit to

G.S.P.H.C.L. Agency has to submit FDR of approved bank as per clause 2.0, section 3, of Rs.

1,47,540.00+GST or quoted amount whichever is higher to G.S.P.H.C.L. for minimum maturity

period of Four years in favour of GSPHC, Which will be released after successful completion of

AMC & at the End of defect liability period. lift OEM has to mantain written record of service &

maintenance during defect liability daily period duly sigh by police dept. and submited regularly to

GSPHCL. Lift agency has to do maintenance as per terms & condition alternate in tender. Also

Lift OEM agency should have proper dress code or identity card during any work ralated to lift due

to safety reasons and authentication to get sign of Police Man. For delay in rectifing the fault,

penalty will be deduced from agency S.D.Whenever agency applied to final S.D. to be released to

department.All Lift licenses are within Validity period of use.In case it is expired then agency has

to renew lift licence.No drawings,documents & liasoning work.

Item No. Description of Item Qty. Unit In Figure In Word Amount

387 Supplying, Installation, Testing & commissioning of Electric driven Main Fire Pump suitable for 1.00 Each 186556.00 RS: One lac Eighty Six Thousand Five

automatic operation and consisting of following, complete in all respects, as required: (a) Hundred Fifty Six only

Horizontal type, Single stage, centrifugal, End Suction Long Coupled Pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP

Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation on

415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted

type with Class-'F' insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as

required. (d) Suitable Cement Concrete Foundation duly plastered with anti vibration pads. (e)

cost include foot valve of suitable size CI body heavy duty. (f) Discharge :- minimum 1620 LPM.

Note: The head of the pump shall be selected in a manner so as to give a minimum 3.5kgf/cm2

pressure at the highest/farthest point. Agency has to calculate the total head required for getting

minimum 3.5kgf/cm2 pressure at the farthest & highest point of building of wet riser fire system.

For that agency has to calculate total pump head by considering vertical head ( Total Building

height+ Sump depth+3.5kgf/cm2 pressure & Total equivalent vertical head due to frication losses

of total length of pipe + bend number, Elbow number, Tee, Valve etc.) Agency must have to select

pump model having required head & discharge( asper fire department rules) at duty point. No

Extra payment shall be done for head variation due to site situation & fire rules. The panel shall be

design according to motor H.P

388 Supplying, installation, testing and commissioning of Diesel engine driven Main Fire Pump 1.00 Each 456202.00 RS: Four lac Fifty Six Thousand Two

suitable for automatic operation and consisting of following, complete in all respects, as required: Hundred Two only

[Diesel driven pump]

(a) Horizontal type, Singlestage, centrifugal, End suction Long Coupled pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal conforming to IS

(b) Suitable HP 2900 RPM water cooled with radiator diesel conforming to relavant IS standard

complete with auto starting mechanism 12/24 Volts electric starting equipment, diesel tank,

exhaust pipe extended upto 10 M outside pump house duly insulated with 50 mm thick glass wool

with 1.00 mm thick aluminium sheet cladding, residential silencer, instrument and protection as

per standard specification, stop solenoid for auto stop in the event of fault with auto indications

painted with post office red color etc. as required.

(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as

Item No. Description of Item Qty. Unit In Figure In Word Amount

(d) Suitable cement concrete foundation duly plastered with anti vibration pads.

(e) Cost include providing, erecting req. size copper XLPE Armound cable with GI cable tray,

support etc. as per EIC instruction (app. cable lenth 15 mtr.)

(f) Cable from pump to panel will be laid in cable tray or fixed on G.I./M.S. strip / channel as per

instructions given by EIC as per site requirement.

(g)Cost include foot valve of Suitable size CI body heavy duty (SANT,Kirloskar, Kartar, Zoloto

(h)Discharge:- minimum 1620 LPM. Note: The head of the pump shall be selected in a manner so

as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.

[The all require Technical specification & Test certificate shall be submitted to Local fire Authority

(Factory inspection will have to carried out by agency with G.S.P.H.C.L. engineer)

389 Supplying, installation, testing and commissioning of electric driven pressurisation pump 1.00 Each 73821.00 RS: Seventy Three Thousand Eight

suitable for automatic operation and consisting of following, complete in all respects, as Hundred Twenty One only

required: (Jockey Pump).

(a) Horizontal type, Singlestage, centrifugal, End suction Long Coupled pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal conforming to IS

(b) Suitable HP Squirrel cage induction motor, TEFC type suitable for operation on 415 volts,

3 phase, 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted

type with Class-'F' insulation,conforming to IS :

(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as

(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

(e) Required size 3 core flat cable from pump to panel for connection should be provided with

(f) Cable from pump to panel will be laid in cable tray or fixed on G.I./M.S. strip / channel as per

instructions given by EIC as per site requirement.

(g) Cost include foot valve of suitable size CI body heavy duty.(SANT,Kirloskar, Kartar, Zoloto

(h) Discharge:- minimum 180 LPM.

Note: The head of the pump shall be selected in a manner so as to give a minimum 3.5kgf/cm2

pressure at the highest/farthest point

(Factory inspection will have to carried out by agency with G.S.P.H.C.L. engineer)

Item No. Description of Item Qty. Unit In Figure In Word Amount

390 Fabrication, supply, installation and commissioning of electrical control panel of cubical 1.00 Each 217623.00 RS: Two lac Seventeen Thousand Six

construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet, compartmentalised Hundred Twenty Three only

with hinged locable doors, dust and vermin proof, power coated of approved shade after 7 tank

treatment process, cable alley, inter connection with suitable size copeer conductor cable/solid

copper strip having switchgear and accessories, mounting and internal wiring, earth terminals,

numbering etc. complete in all respect suitable for main fire pump, pressurisation pump and diesel

pump set complete as per specification with following incoming and outgoings suitable for

operation on 415 V, 3 phase 50 Hz AC supply with enclosure protection class IP 42 as required.

Upto 250A, 50 KA 4 Pole MCCB Ics=100% Icu rating.

Digital voletmeter 0-500 V with selector switch

Digital ammeter 0-250 A with selector switch and CT's etc.

LED type RYB phase indicating lamp, ON, OFF, TRIP indicationg lamps.

Set of copper busbar 300 A.

[Note:- All outgoing feeder for pumps should have digital ammeter with selector switch and LED

type ON, OFF and TRIP indicating lamps.)

MAIN FIRE PUMP:

125 A 50kA TPN MCCB Ics=100% Icu with fully automatic star/delta starter suitable for 60 HP

pump with overload protection current sensing type single phase preventor complete with all

accessories and internal wiring required for automatic operation, selector switch for local/remote,

auto/manual/OFF operation.

63 A 50kA TPN MCCB Ics=100% Icu with suitable HP fully automatic Star/Delta starter with

overload protection, current sensing type single phase preventor complete with all accessories

and internal wiring required for automatic operation, selector switch for local/remote,

auto/manual/OFF operation.DIESEL ENGINE CONTROL:

1) Automatic/Manual selector switch and 3 attempt starting device, timers and relay as required,

push buttons, start/stop in manual mode.

2) Indicating lamp for high/low lub oil pressure, high water temperature and engine ON indication.

3) Battery charger suitable for 12/24 V DC with boost and trickle selector switch 0-30 V DC Volt

meter and 0-20 A DC Ammeter.

4) All standard relays and accessories for autoamtic operation of diesel engine.

SYSTEM CONTROLLER:

Design, supply, installation, testing and commissioning of system controller to control operation of

main electric fire pump, Pressurisation (Jockey) Pump, Diesel pump and terrace pump in

sequence as per specification consisting of relays, timers, sensors, annunciation window for fault

indication complete as per specification.

391 Providing and fixing of Pressure switch with Needle valve ( Indfos,Honeywell,System Sensor 3.00 Each 1310.00 RS: One Thousand Three Hundred

make and Model Instruct by EIC (Only) Ten only

Item No. Description of Item Qty. Unit In Figure In Word Amount

392 Providing and fixing of Air Release Valve including Ball Valve 25 mm dia. (Approved ISI make & 2.00 Each 1601.00 RS: One Thousand Six Hundred One

model approved by EIC strictly as per specification) only

393 Supply, Installation, Testing and Commissioning of Pump On-Off switch (with all mounting 4.00 Each 890.00 RS: Eight Hundred Ninty only

accessories , complete with Junction Box for mooting on Surface, Cable lugs at Ends, cable

compression glands, cable tags and Ferruling.)for remote operation from each floor of the

building. (Approved by EIC) (Test certificate must be submitted)

394 Providing and erecting PVC insulated PVC Sheathed flat flexible copper cable ISI marked 50.00 Mtr. 171.00 RS: One Hundred Seventy One

approved make of size with all require accessories For 3 Core x 6 Sq. mm. only

395 Providing and erecting PVC insulated PVC Sheathed flat flexible copper cable ISI marked 50.00 Mtr. 484.00 RS: Four Hundred Eighty Four

approved make of size with all require accessories For 3 Core x 16 Sq. mm. only

396 Supply ,Installation , testing & Commissioning of heavy duty meduim voltage cable as per 200.00 Mtr. 107.00 RS: One Hundred Seven only

specficification & IS 7098 part I , 4C X 1.5 SQ.,MM ARMOURED CABLE (CU.) FRLS,RED

colour with approved make , with require support , cable tie, cable tagging , hardare are etc to

complete the work.(As per BIS standard)

397 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked 3000.00 Mtr. 31.00 RS: Thirty One only

copper wires of following size to be erected as directed.For 1.50 Sq.mm 2 core round PVC

sheathed. having insulation colour RED and BLACK for Fire Alarm System.

398 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg Filled 20.00 Each 1991.00 RS: One Thousand Nine Hundred

with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Ninty One only

Pressure Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec,

Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on

Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn

& CO2 Mig welded, EPDM(Ethylene Propylene Diene Monomer) Rubber Hose with both end

Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester

Powder coating (UV Resistant),Brass forged CE Marked valves with NRV & Auto Safety Release

with safety Pin is of SS material, Made up from 1.6mm thick sheet, Extinguishers confirmed to

IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg,

1. Necessary certificate & and guarantee must be attached, 2. OEM has to provide wall mounting

heavy duty bracket/clamp, screw, hardware for installation. 3.Following printed marking

Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be

of 3 Years. Following Printed marking on equipment must be required:- Model No, Capacity,

Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with

necessary numbering / marking with oil paint by painter as instructions given by G.S.P.H.C.L

engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

Item No. Description of Item Qty. Unit In Figure In Word Amount

399 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 20.00 Each 6526.00 RS: Six Thousand Five Hundred

Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Twenty Six only

Electrical non-conductor Polyethylene Flat Horn with Diffuser Nozzle for dispersed discharge of

CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and

electrically started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of

enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2

Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS

7285 and PESO ( Petroleum and Explosives Safety Organization) APPROVED, Minimum Wall

Thickness 4 to 4.2 mm, Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance

Weight:-Gross Weight 16.4, empty weight 11.9 Kg, 1. Necessary certificate & and guarantee

must be attached, 2. OEM has to provide wall mounting heavy duty bracket/clamp, screw,

hardware for installation. 3.Following printed marking Manufacturing Date and Expiry Date must

be mention on Extinguisher 4. Refilling period must be of 5 Years. Following Printed marking on

equipment must be required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No,

Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil paint by painter

as instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX , CEASEFIRE)

400 Providing and fixing of Automatic type 5 kg Fire Extinguishers Mono Ammonium Phosphate 1.00 Each 5240.00 RS: Five Thousand Two Hundred Forty

powder 50% Confirms to IS 4308, Applicable fire classes A,B & C, UGTS Pressure Gauge, Can only

Height 370mm, Diameter 230 ± 10mm, Made up from 2 mm thick sheet, Body Construction Deep

Drawn with MIG Welding technology, Brass forged sprinkler valves with Nozzle is specially

designed to give more than 99% discharge. Together with orifice characteristic to cover

adequately fire risks with scattering cone of 40 to 45° Angle. External Pure polyester (UV

resistant) and Internal Epoxy polyester powder coated, Heat Sensitive Glass bulb of 68 °C. Area

covered will be 2-2.5 m2 and volume of coverage is 7 m3. Referance Weight:-Empty Weight

kg, Full weight 7.64 kg, 1. Necessary certificate & and guarantee must be attached, 2. OEM has

to provide heavy duty wall/ Ceiling mounting Bracket/ clamp, screw, hardware for installation.

3.Following printed marking Manufacturing Date and Expiry Date must be mention on

Extinguisher 4. Refilling period must be of 3 Years. Following Printed marking on equipment must

be required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg

Month, Refilling Due. [with necessary numbering / marking with oil paint by painter as instructions

given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

Item No. Description of Item Qty. Unit In Figure In Word Amount

401 Executing comprehensive (All-in-All) service & maintenance with spare parts as per terms & 1.00 Per 58658.00 RS: Fifty Eight Thousand Six Hundred

condition of tender for Fire terrace pump with fire hydrant agency for defect liability period and Job/Per Fifty Eight only

copy of this contract will be submitted before final bill. Agency has to quote rate accordingly. Tower

Agency has to also provide the fitness certificate from system agency and submit to G.S.P.H.C.L.

Agency has to compulsory submit FDR of Approved bank as per clause 2.0 section

Rs.58,658.00+GST or quoted Amount whichever is higher to G.S.P.H.C.L,for minimum maturity

period of Five years in favour of G.S.P.H.C.L Which will be released after successful completion

of A.M.C. & at the completion of defect liability period. Fire System agency has to maintain written

record of service & maintenance during defect liability period duly sign by police dept. and submit

regularly to G.S.P.H.C.L. Agency has to give minimum three services and demonstration per year

and testing and training ofentire fire hydrant, sprinkler, fire alarm, fire extinguishers, etc.during

defect liability period and obtain necessary certificate from police department and submit to

G.S.P.H.C.L. Agency has to do maintenance as per terms & condition alternative in

tender.Refilling hydraulic pressure of co2 and ABC type fire extinguishers if required to set N.O.C.

from fire department.Agency has to give One live demonstration of fire Mock drill for fire fighting

with minimum 01 no. CO2 and 01 no. ABC type fire extinguisher at the time of handing over this

system to the Police department and another at the time of releasing final Security deposit. The