Upgradation of Hydrant Irrigation System and Allied Works at Kundorian

Providing and laying of G.I pipe of medium grade of parkash surya ,jindal or Tata make in dug out trenches including cutting , threading , making of joints , complete with sockets. The job includes digging of trenches for laying of pipeline including refilling of trenches (depth of the trenches as per site conditions)

15mm dia

20mm dia

25mm dia

40mm dia

50mm dia

65mm dia

100mm dia

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing gun metal aate valve with C.I wheel of approved quality (screwed end).

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

50 mm nominal bore

65 mm nominal bore

Providing and fixing ball valve (brass) of approved quality Complete.

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fitting of starter for 1 HP – 10HP monoblock Pump set of Havell’s or L&T make.

Providing and fitting SPN of Havells/L&T/Wipro/Indo Kopp or equivalent make.

32Amp SPN.

40 Amps SPN.

63Amp SPN.

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core flexible cable in the existing surface/recessed steel/ PVC conduit as required.

Providing and laying of armoured aluminum cable encased in 3" ID ribbed flexible PVC hose pipe to act as conduit for cable of Havells, Anchor, Finolex, Polycab or Equivalent make in dug out trenches. The job includes digging out trenches and laying of cable including refilling of trenches.

10mm sq 2 core

Providing and laying of armoured aluminum cable of Havells, Anchor, Finolex, Polycab or Equivalent make in dug out trenches. The job includes digging out trenches and laying of cable including refilling of trenches.

16mm sq 2 core

16mm sq 4 core

Hire Charges of Technicians engaged for the Welding,fitting of damged parts of Motor Sheds,Starter Sheds,Main panels,raising of motor sheds etc with other allied works.

Welding set(01 nos)

Welder(01 nos)

Providing and fitting of 1.5 HP, single Phase monoblock pump/motor set of Kirlosker, KSB, Kalsi, Crompton and Greaves or Usha make. The job includes material, carriage and labour charges. (Head and discharge as per site conditions and as approved by site Engineer)

Providing and fitting of MS ornamental shed 4'-0"x 2’-0”with ornamental roof of height 3'-0". The ornamental shed is to be fabricated out of 16 gauge MS sheet with front door in two equal halves having proper bolting system. Angle irons extended from four corners of the shed are to be grouted in cement concrete block. Painting one coat of steel primer and two coats of synthetic enamel paint inside and outside is also included in the job. Complete including all material required, labour and carriage charges

Engagement of labour / mazdoor

Providing and fitting of G.I.Fittings.

½” Elbow

½” Union

½” Socket

½” Tank nipple

½” Cap plug

½” x 2” Nipple

½” x 4” Nipple

½” x 6” Nipple

½” x 12” Nipple

1’’ Elbow

1” Union

1” Socket

1” Cap plug

1” Tank nipple

1” x 2” Nipple

1” x 4” Nipple

1” x 6” Nipple

1” x 9” Nipple

1” x 12” Nipple

1”x ½’’ reducer elbow

11/2’’ Elbow

11/2” Union

11/2” Socket

11/2” x 2” Nipple

11/2” x 4” Nipple

11/2” x 6” Nipple

11/2” x 9” Nipple

11/2” x 12” Nipple

2’’ Elbow

2” Union

2” Socket

2” x 2” Nipple

2” x 4” Nipple

2” x 6” Nipple

2” x 9” Nipple

2” x 12” Nipple

2” x 11/2”Reducer Elbow

2” x 11/4”Reducer Tee

21/2”Elbow

21/2” Union