Repairs to compound walling of flood control sub division sopore and renovation of flood control sub divisional office building/ Circle office.

Amount

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) : From brick work in cement mortar

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Extra for brick work in Square or rectangular pillars

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. s

Providing and fixing of 15 mm thick KD wooden panelling (T&G) in walls incl. wooden joists/jamp underneath and cornice complete job in all respect incl. polish.(R.T.Q)

Finishing walls with Acrylic smooth exterior paint of required shade:Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and installing of SSI Alumunium Square overhead sign board (Roll of Honour) at circle office. (Complete Job)(R.T.Q)

Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge (complete job) (R.T.Q)

Removing paint from steel work by scrapping and sand papering and preparing the surface smooth incl necessary repairs to scratches etc complete job

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

Supplying and installation of AC of approved brand and make like LG, Daikan or Samsung of capacity of 1.5 Ton (complete job) (R.T.Q)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.4 mm thick glass pane (weighing not less than 10 kg/sqm)

Repairs to existing electic fitting by way of providing new LED concealed lights on/off switches sockets and other acccessories incl. providing of new heating points and providing and fixing main switch board using 12 way double door distribution box and dp switches. (complete job) (R.T.Q)

Carriage of materials from source to site of work by M. T. including cost of loading, unloading and stacking.

Sand for an avg lead 05 kms

GHULAM MUHAMMAD LONE