Bus shelter

Design, Supply, Installation and Commissioning of Recycled Plastic Bus Shelter of size 28 ft x 8 ft x 8 ft with 6 ft x 8 ft provision for a shop, made predominantly with recycled plastic materials, including design, manufacture, supply, transportation, installation and commissioning, complete with seating, electrical arrangements, small shop, municipal/donor branding and lighting provision, using coloured LDPE recycled plastic with heavy-duty MS framework suitable for continuous outdoor public use; the recycled plastic material shall have a minimum life of 10 years; overall dimensions shall be 28 ft length, 8 ft width, 8 ft clear inner height and 8.5 ft outer height, with 22 ft single-row bench seating; structure shall comprise heavy-duty MS material frame of IS 2062 Grade 350 MPa with welded chassis and corrosion-resistant coating, exterior coloured recycled plastic sheets being UV-resistant and weatherproof; recycled plastic material shall have minimum density of 850 kg/m³, minimum flexural strength of 18 MPa, minimum compressive strength of 15 MPa, water absorption less than 1% and outdoor UV stability for minimum 10 years; roof shall be provided with MS sheet roofing; seating of 20–22 ft length shall be made of recycled Low Density Polyethylene waste with MS framework; electrical arrangements shall comprise 230 V AC, 50 Hz supply, LED ceiling lights, distribution board with MCB/RCCB, power sockets, switches and concealed wiring; flooring shall be provided with 18 mm recycled plastic sheets weighing approximately 50–60 kg and walling/ceiling shall be provided with 8 mm recycled plastic sheets weighing approximately 18–25 kg, using coloured sheets manufactured from Low Density Polyethylene waste for inner walling, false ceiling, seating and flooring; structure shall be designed for wind load as per IS 875 (Part 3) with design wind speed of 180 km/hr, roof maintenance load of 0.75 kN/m² and seismic design as per IS 1893 wherever applicable; all surfaces shall have integral colour, UV-resistant and easy-to-clean finish; suitable recycled plastic railing shall be provided at the front entrance for accessibility; each shelter shall utilize approximately 2.5+ tonnes of post-consumer/post-industrial recycled plastic waste, equivalent to approximately 5+ tonnes CO₂e avoided (indicative); minimum 5-year warranty shall be provided against manufacturing defects, structural failure, degradation and excessive fading; and submission of 2D drawings, reference images and recycled plastic NABL material test certificates, including all materials, labour, transportation, erection, installation, testing, commissioning and all other allied works, complete in all respects as per the technical specifications and instructions of the Corporation